aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-05-02USB: add Cypress c67x00 OTG controller HCD driverPeter Korsgaard
This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add Cypress c67x00 OTG controller core driverPeter Korsgaard
This patch add the core driver for the c67x00 USB OTG controller. The core driver is responsible for the platform bus binding and creating either USB HCD or USB Gadget instances for each of the serial interface engines on the chip. This driver does not directly implement the HCD or gadget behaviours; it just controls access to the chip. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add Cypress c67x00 low level interface codePeter Korsgaard
This patch adds the low level support code for the Cypress c67x00 family of OTG controllers. The low level code is responsible for register access and implements the software protocol for communicating with the 16bit microcontroller inside the c67x00 device. Communication is done over the HPI interface (16bit SRAM-like parallel bus). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: airprime: unlock mutex instead of trying to lock it againLeonardo Chiquitto
The following patch fixes a [probable] copy & paste mistake in airprime.c. Instead of unlocking an acquired mutex, the actual code tries to lock it again. Signed-off-by: Leonardo Chiquitto <lchiquitto@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: storage: Update mailling list addressAndrew Lunn
drivers/usb/storage/unusual_devs.h lists the address linux-usb-devel@lists.sourceforge.net for patches to that file. This address results in a bounce and a pointer to vger. This patch updates the address in the header file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.Andrew Lunn
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: Add the USB 2.0 extension descriptor.Sarah Sharp
This device descriptor was added by the recent USB Link Power Management (LPM) ECN. It indicates whether the USB device supports LPM. This descriptor is grouped under a Binary Device Object Store (BOS) descriptor. Update the BOS comments to indicate any USB device (not just wireless USB devices) can implement BOS descriptors. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add more FTDI device idsPeter Mack
Add more usb device ids to the ftdi driver. From: Peter Mack <Peter.Mack@scs-ptc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: fix cannot work usb storage when using ohci-sm501Yoshihiro Shimoda
When I used ohci-sm501, hcd_alloc_coherent() in map_urb_for_dma() is not called, because usb_sg_init() always sets URB_NO_TRANSFER_DMA_MAP. dmesg (CONFIG_USB_STORAGE_DEBUG enabled): usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries usb-storage: Status code -75; transferred 0/36 usb-storage: -- babble usb-storage: Bulk data transfer result 0x3 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x2 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: gadget zero timer init fixDavid Lopo
Initialize timer earlier so if an error occurs allocating USB request or buffer request (zero_bind) Gadget Zero will not hang trying to delete an uninitialized timer (zero_unbind). Signed-off-by: David Lopo <lopo.david@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: gadget zero style fixups (mostly whitespace)David Brownell
Minor updates to "Gadget Zero". - Primarily these are whitespace updates to address the fact that since this was written, Documentation/CodingStyle was changed to disapprove of parts of the original coding style. - Update a few comments that weren't quite correct, notably mentioning the "autoresume" module parameter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb serial gadget: CDC ACM fixesDavid Brownell
Based on a patch from <Aurel.Thomi@ruag.com>, this makes the CDC-ACM support in the serial gadget handle the SET_LINE_CODING and SET_CONTROL_LINE_STATE requests ... which should improve interop with at least MS-Windows "usbser.sys" if not some other ACM host drivers. It also adds a few REVISIT comments where this code plays a bit loose with the CDC ACM spec. If this were used to hook up to a real RS232 or modem link, those places would need a bit of work. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: pxa27x_udc driverRobert Jarzmik
Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: INTOVA Pixtreme camera mass storage deviceRohan Hart
FIX_CAPACITY is all that's needed. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: mos7840: test and propagate set_uart_reg return valueRoel Kluin
The test for an mos7840_set_uart_reg() error return value only works when status is signed. propagate its error value. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: SL Baur <steve@xemacs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: usbtest displays diagnostics againDavid Brownell
Minor cleanup to the "usbtest" driver, mostly to resolve a regression: all the important diagnostics were at KERN_DEBUG, so that when the "#define DEBUG" was removed from the top of that file it stopped providing diagnostics. Fix by using KERN_ERROR. Also: - Stop using the legacy dbg() calls - Simplify the internal debug macros - Correct some test descriptions: * Test #10 subcase 7 should *always* stall * Test #10 subcase 8 *may* stall - Diagnostic about control queue test failures is more informative - Fix some whitespace "bugs" And add a warning about the rude interaction between usbfs ioctl() and khubd during device disconnect ... don't unplug a device under test, that will wedge. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: CosmeticsPete Zaitcev
Fix a few comments and printk statements. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: Ignore bad residuePete Zaitcev
I hoped to continue to ignore this problem or use libusual, but these days it's simpler to work around than to deal with it. Let's attempt to use bad residue devices and hope that upper level integrity checks catch any problems (e.g. please use sha1sum on your backups). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: Tune retriesPete Zaitcev
Make ub to fail faster in hopeless cases. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: Fix timeoutsPete Zaitcev
The wodim says: "close track/session scsi sendcmd: cmd timeout after 5.000 (480) s" This happened because we ignored the supplied timeout and used 5s. It's not completely correct to apply a timeout meant for the complete command to any single URB, but we don't have many URBs per command, so this is simple and works. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: libusual kthread_run() called with wrong format.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb-storage: add unusual_devs entry for Samsung YP-U3Alan Stern
This patch (as1088) adds an unusual_devs entry for Samsung's YP-U3. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: storage/onetouch.c: make a function staticAdrian Bunk
This patch makes the needlessly global onetouch_release_input() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb-storage: fix build failure in OneTouch driverDmitry Torokhov
If USB storage is built-in but input subsystem is made modular then OneTouch button functionality can not be selected. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: ldusb: ld_usb semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: ISP1760 HCD driverSebastian Siewior
This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-sbp2: log scsi_target ID at release ieee1394: fix NULL pointer dereference in sysfs access
2008-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-linus: kbuild: fix vmlinux.o link kconfig: made check-lxdialog more portable
2008-05-01Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD][NOR] Add physical address to point() method [JFFS2] Track parent inode for directories (for NFS export) [JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean. [JFFS2] Quiet lockdep false positive. [JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once() [MTD] Delete long-unused jedec.h header file. [MTD] [NAND] at91_nand: use at91_nand_{en,dis}able consistently.
2008-05-01[MTD][NOR] Add physical address to point() methodJared Hulbert
Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace code from flash. Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01firewire: fw-sbp2: log scsi_target ID at releaseStefan Richter
Makes the good-by message more informative. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-05-01ieee1394: fix NULL pointer dereference in sysfs accessStefan Richter
Regression since "ieee1394: prevent device binding of raw1394, video1394, dv1394", commit d2ace29fa44589da51fedc06a67b3f05301f3bfd: $ cat /sys/bus/ieee1394/drivers/raw1394/device_ids triggers a NULL pointer dereference in fw_show_drv_device_ids. Reported by Miles Lane. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Miles Lane <miles.lane@gmail.com>
2008-05-01[JFFS2] Track parent inode for directories (for NFS export)David Woodhouse
To support NFS export, we need to know the parent inode of directories. Rather than growing the jffs2_inode_cache structure, share space with the nlink field -- which was always set to 1 for directories anyway. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01kbuild: fix vmlinux.o linkSam Ravnborg
We always linked vmliux.o. Remove init/built-in.o dependency so we avoid this Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-01kconfig: made check-lxdialog more portableSam Ravnborg
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-By: Timur Tabi <timur@freescale.com>
2008-05-01make generic sys_ptrace unconditionalChristoph Hellwig
With s390 the last arch switched to the generic sys_ptrace yesterday so we can now kill the ifdef around it to enforce every new port it using it instead of introducing new weirdo versions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01[JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean.David Woodhouse
We don't actually care about nlink; we only care whether the inode in question is unlinked or not. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix early setup of hwif->host_flags
2008-05-01Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (adt7473) minor cleanup / refactoring hwmon: (asb100) Remove some dead code hwmon: (lm75) Fix an incorrect comment hwmon: (w83793) VID and VRM handling cleanups hwmon: (w83l785ts) Don't ask the user to report failures hwmon: (smsc47b397) add a new chip id (0x8c)
2008-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: add MODULE_STATE_GOING notifier call module: Enhance verify_export_symbols module: set unused_gpl_crcs instead of overwriting unused_crcs module: neaten __find_symbol, rename to find_symbol module: reduce module image and resident size module: make module_sect_attrs private to kernel/module.c
2008-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] cryptd: Correct kzalloc error test [CRYPTO] eseqiv: Fix off-by-one encryption [CRYPTO] api: Fix scatterwalk_sg_chain [CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv()
2008-05-01m68knommu: fix FEC driver lockingSebastian Siewior
It's easy: grab locks before talking to hardware and realease them afterwards. The one big lock has been splitted into a hw_lock and mii_lock. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: kill warnings in FEC driverSebastian Siewior
linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init': linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j' linux-2.6-mk68/drivers/net/fec.c: At top level: linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: remove unused interrupts in FEC driverGreg Ungerer
Remove the acquisition of unused interrupt types. We don't need to register all the TX and RX varients used on some ColdFire FEC hardware. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: fix ColdFire 5272 fec driver hash registersGreg Ungerer
Renamed the 5272 hash_table registers to match the "grp" hash_table registers of the other ColdFire parts. They are actually a group hash. The makes for consistent setup across all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: fix compare race in sched related codeSebastian Siewior
The interrupts must be disabled before considering the need resched bit of the task struct and they have to be disabled before calling schedule() Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: rework definition of HZGreg Ungerer
Rework the HZ definition to be more consistent with other architectures. Non-kernel includers will see a constant HZ setting of 100. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: update MAX_M68K_DMA_CHANNELS for some plattformsSebastian Siewior
include/asm-m68knommu/mcfdma.h defines base0-3 for M523x, M527x and M528x so it looks this has been forgotten. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: remove unused CONFIG_DISKtelGreg Ungerer
Remove unused CONFIG_DISKtel support. Missing config definition pointed out by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: add WilFire and WildfireMod board supportSteve Bennett
This patch adds linux-2.6.x kernel support for the Intec Automation ColdFire 5282-based boards, the WildFire and WildFireMod Signed-Off-By: Steve Bennett <steveb@workware.net.au> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 01:06:44 +0000