aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-09-27[ARM] 3858/1: S3C2412: power management codeBen Dooks
Add S3C2412 power management code, and move the core register saving in from s3c2412.c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)David Anders
Add the AML M5900 series to the list of supported machines in the arch/arm/mach-s3c2410 directory. This ensures the core peripherals are registered, and the timer source is configured. if selected in the kernel config the framebuffer registers and mtd partition information are set. This version of the patch has corrected formatting and removed the legacy procfs directory entry. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3838/1: ARM: DCC debug console support for ARM11Tony Lindgren
Adds support for CONFIG_DEBUG_ICEDCC for ARM11. Tested on ARM1136 (OMAP2420). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] Cleanups for 4cc9bd2eaa1063c68341c1c00e66660adcfdf254Russell King
- Document the meaning for OP_SCALAR, OP_SD and add OP_DD. - Formatting cleanups - Remove now redundant code for making compare instructions operate on scalar values. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3789/4: Fix VFP emulation to ignore VECITR for scalar instructionGen FUKATSU
VECITR in Floating-Point Exception register indicates the number of remaining short vector iterations after a potential exception was detected. In case of exception caused by scalar instructions, VECITR is NOT updated. Therefore emulation for VFP must ignore VECITR field and treat "veclen" as zero when recognizing scalar instructing. Signed-off-by: Gen Fukatsu <fukatsu.gen@jp.panasonic.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3792/2: Fix description of ZBOOT_ROM_BSSDan Fandrich
The documentation for the ZBOOT_ROM_BSS config option describes it as "The base address of 64KiB of read/write memory in the target for the ROM-able zImage..." In actuality, it requires more than 100 KiB of space in addition to enough space to hold the decompressed kernel. This patch fixes the description in the Kconfig file. Signed-off-by: Dan Fandrich <dfandrich@intrinsyc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3853/1: Fix flush_ptrace_access() thinko for nonaliasing VIPT cache caseGeorge G. Davis
Fix thinko in the flush_ptrace_access() "if (expr)" for the ARM VIPT non-aliasing cache case. We only need to flush cache when VM_EXEC is set in vma->vm_flags but "if (expr) always evaluates to true on UP systems for the ARM VIPT non-aliasing cache case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3852/1: convert atomic bitops and __xchg over to ↵Lennert Buytenhek
raw_local_irq_{save,restore} Thomas Gleixner noticed that bitops.h should also use the raw_* irq disable/enable variants, and __xchg needs them as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3851/1: iop3xx: add io-data glantank supportLennert Buytenhek
Add support for the IO-Data GLAN Tank, from Martin Michlmayr. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3850/1: iop3xx: add thecus n2100 supportLennert Buytenhek
Add support for the Thecus n2100 (80219-based.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3849/1: fix get_unaligned() for gcc >= 4.1Lennert Buytenhek
gcc 4.1's __typeof__ propagates 'const', which breaks get_unaligned(). Rewrite get_unaligned() not to use __typeof__. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3846/1: S3C24XX: Fix osiris memory mapBen Dooks
The memory mapping for the Osiris machine are all off by one bit, and the base address has been fixed for writing (bit25 is being checked by the write, but not on read) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3844/1: S3C24XX: update s3c2410_defconfigBen Dooks
New s3c2410_defconfig, updated 2.6.18 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3843/1: S3C24XX: Remove modfication lines from commentsBen Dooks
Remove the redundant Modification lines from the top of the files in arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3842/1: S3C2412: Rename LCD deviceBen Dooks
The S3C2412 LCD controller is different enough to warrant renaming the platform device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3841/1: S3C2412: Add new IDCODE 32412003Ben Dooks
Add new code for the S3C2412 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3840/1: S3C2412: Add machine VSTMSBen Dooks
Add new machine VSTMS Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3834/1: iop3xx: remove per-board defconfigsLennert Buytenhek
Remove the old per-board defconfigs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3833/1: iop3xx: add per-mach defconfigsLennert Buytenhek
Add one defconfig for all iop32x boards and one defconfig for all iop33x boards. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3832/1: iop3xx: coding style cleanupLennert Buytenhek
Since the iop32x code isn't iop321-specific, and the iop33x code isn't iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up the code to conform to the coding style guidelines somewhat better. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3831/1: iop3xx: factor out common register definesLennert Buytenhek
Factor out the register defines for a number of other peripherals common to the iop32x and iop33x. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3830/1: iop3xx: board support file cleanupLennert Buytenhek
Revamp the iop3xx board support: move the support code for each iop board type into its own file, start using platform serial and platform physmap flash devices, switch to a per-board time tick rate, and get rid of the ARCH_EP80219 and STEPD config options by doing the relevant checks at run time. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3829/1: iop3xx: optimise irq entry macrosLennert Buytenhek
Squeeze three instructions out of the iop32x irq demuxer, and nine out of the iop33x irq demuxer by using the hardware vector generator. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3828/1: iop3xx: remove useless loadsp macroLennert Buytenhek
The iop33x loadsp hunk in arch/arm/boot/compressed/head.S serves no purpose -- remove it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3827/1: iop3xx: add common gpio moduleLennert Buytenhek
Implement the gpio_line_{config,get,set} API for iop3xx. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offsetLennert Buytenhek
Get rid of the unused IOP3??_IRQ_OFS irq offset define, start IRQ numbering from zero. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3825/1: iop3xx: use cp6 enable/disable macrosLennert Buytenhek
Add CP6 enable/disable sequences to the timekeeping code and the IRQ code. As a result, we can't depend on CP6 access being enabled when we enter get_irqnr_and_base anymore, so switch the latter over to using memory-mapped accesses for now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3824/1: iop3xx: add cp6 enable/disable macrosLennert Buytenhek
Add macros to enable and disable access to CP6. On the iop3xx, enabling CP6 access unfortunately also enables access to that coprocessor from unprivileged code, so we need these macros to enable and disable access to the coprocessor whenever we need to access it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common time implementation, and remove the (nearly identical) iop32x and iop33x time implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3822/1: iop3xx: rewrite time handlingLennert Buytenhek
Merge and rewrite the iop32x/iop33x time code to do lost jiffy tracking properly, and put the result in plat-iop/time.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common PCI implementation, and remove the (nearly identical) iop32x and iop33x PCI implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3820/1: iop3xx: factor out shared pci codeLennert Buytenhek
Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3819/1: iop3xx: factor out shared i2c codeLennert Buytenhek
Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c and include/asm-arm/hardware/iop3xx.h. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x codeLennert Buytenhek
Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33xLennert Buytenhek
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3816/1: iop3xx: rename config symbolsLennert Buytenhek
Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3836/1: S3C24XX: Clear both EINT and INT status before sleepBen Dooks
Clear both the EINT and INT status before going to sleep, otherwise we may end up being woken by something that was not set in our wakeup map. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3806/2: S3C2412: Fix GPIO VA when only S3C2412 selectedBen Dooks
The s3c24xx_va_gpio2 variable is only used when the S3C2412 and another cpu-type is being used in the kernel. This patch ensures it is not set when it is not being used. Fixes bug report by Thomas Gleixner. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pmBen Dooks
Remove the S3C2410 specific items out of the core PM code. Add sysdev driver for all the S3C24XX series that used the S3C2410 PM code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3800/2: S3C2412: DMA channel mappingsBen Dooks
DMA channel mappings for the S3C2312 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3814/1: move 80200 dma_inv_range() erratum check out of lineLennert Buytenhek
On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't clear the dirty bits, which means that if we invalidate a dirty line, the dirty data can still be written back to memory later on. To work around this, dma_inv_range() on these two processors is implemented as dma_flush_range() (i.e. do a clean D-cache line before doing the invalidate D-cache line.) For this, we currently have a processor ID check in xscale_dma_inv_range(), but a better solution is to add a separate cache_fns and proc_info for A0/A1 80200. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3813/1: prevent >= 4G /dev/mem mmap()Lennert Buytenhek
Prevent userland from mapping in physical address regions >= 4G by checking for that in valid_mmap_phys_addr_range(). Unfortunately, we cannot override valid_mmap_phys_addr_range() without also overriding valid_phys_addr_range(), so copy drivers/char/mem.c's version of valid_phys_addr_range() over to arch/arm/mm/mmap.c as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3811/1: ep93xx: add cirrus logic edb9312 supportLennert Buytenhek
Add Cirrus Logic EDB9312 support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3810/1: switch atomic helpers over to raw_local_irq_{save,restore}Lennert Buytenhek
Now that we have raw_* variants of local_irq_$FOO(), switch the atomic helpers over to use those raw_* variants. This is necessary when using lockdep on pre-ARMv6 hardware, as lockdep uses atomic_t counters in the trace_hardirqs_off() path. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3805/1: S3C2412: LCD register updateBen Dooks
Add LCD register definitions for the S3C2412. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3804/1: S3C2442: LCD register updateBen Dooks
Add LCD register definitions for the S3C2442. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3802/1: S3C24XX: PM tidy up cache flushingBen Dooks
Change to using flush_cache_all() in pm.c and also remove the need to flush the cache in the PM code. This changes the sleep.S code to have an entry to store the registers for resume, and then a second entry (after the caches are cleaned) to do the suspend and resume. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3801/1: S3C24XX: Move IRQ PM out of pm.cBen Dooks
Seperate the IRQ power management code out of the pm.c file, and add it to the relevant system class devices. Also make the suspend and resume code take notice of the fact these registers can be moved by compile time code. Add fix from Ilya Yanok to also save the INTSUBMSK over sleep. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3799/1: S3C2442: DMA channel mappingsBen Dooks
DMA channel mappings for the S3C2442 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 12:30:53 +0000