aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-17befs ->pust_super() doesn't need BKLAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17Cleanup of adfs headersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-179P doesn't need BKL in ->umount_begin()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17fuse doesn't need BKL in ->umount_begin()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17No instance of ->bmap() needs BKLAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17remove unlock_kernel() left accidentallyJ. R. Okajima
commit 337eb00a2c3a421999c39c94ce7e33545ee8baa7 Push BKL down into ->remount_fs() and commit 4aa98cf768b6f2ea4b204620d949a665959214f6 Push BKL down into do_remount_sb() were uncorrectly merged. The former removes one pair of lock/unlock_kernel(), but the latter adds several unlock_kernel(). Finally a few unlock_kernel() calls left. Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17ext4: avoid unnecessary spinlock in critical POSIX ACL pathTheodore Ts'o
If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem to do POSIX ACL checks on any files not owned by the caller, and it does this for every single pathname component that it looks up. That obviously can be pretty expensive if the filesystem isn't careful about it, especially with locking. That's doubly sad, since the common case tends to be that there are no ACL's associated with the files in question. ext4 already caches the ACL data so that it doesn't have to look it up over and over again, but it does so by taking the inode->i_lock spinlock on every lookup. Which is a noticeable overhead even if it's a private lock, especially on CPU's where the serialization is expensive (eg Intel Netburst aka 'P4'). For the special case of not actually having any ACL's, all that locking is unnecessary. Even if somebody else were to be changing the ACL's on another CPU, we simply don't care - if we've seen a NULL ACL, we might as well use it. So just load the ACL speculatively without any locking, and if it was NULL, just use it. If it's non-NULL (either because we had a cached entry, or because the cache hasn't been filled in at all), it means that we'll need to get the lock and re-load it properly. (This commit was ported from a patch originally authored by Linus for ext3.) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17ext3: avoid unnecessary spinlock in critical POSIX ACL pathLinus Torvalds
If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem to do POSIX ACL checks on any files not owned by the caller, and it does this for every single pathname component that it looks up. That obviously can be pretty expensive if the filesystem isn't careful about it, especially with locking. That's doubly sad, since the common case tends to be that there are no ACL's associated with the files in question. ext3 already caches the ACL data so that it doesn't have to look it up over and over again, but it does so by taking the inode->i_lock spinlock on every lookup. Which is a noticeable overhead even if it's a private lock, especially on CPU's where the serialization is expensive (eg Intel Netburst aka 'P4'). For the special case of not actually having any ACL's, all that locking is unnecessary. Even if somebody else were to be changing the ACL's on another CPU, we simply don't care - if we've seen a NULL ACL, we might as well use it. So just load the ACL speculatively without any locking, and if it was NULL, just use it. If it's non-NULL (either because we had a cached entry, or because the cache hasn't been filled in at all), it means that we'll need to get the lock and re-load it properly. This is noticeable even on Nehalem, which does locking quite well (much better than P4). From lmbench: Processor, Processes - times in microseconds - smaller is better -------------------------------------------------------------------- Host OS Mhz null null open slct fork exec sh call I/O stat clos TCP proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- - before: nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.95 1.45 2.18 69.1 273. 1141 nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.95 1.48 2.28 69.9 253. 1140 nehalem.l Linux 2.6.30- 3193 0.04 0.10 0.95 1.42 2.19 68.6 284. 1141 - after: nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.44 2.12 68.3 282. 1094 nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.39 2.20 67.0 308. 1123 nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.39 2.36 67.4 293. 1148 where you can see what appears to be a roughly 3% improvement in stat and open/close latencies from just the removal of the locking overhead. Of course, this only matters for files you don't own (the owner never needs to do the ACL checks), but that's the common case for libraries, header files, and executables. As well as for the base components of any absolute pathname, even if you are the owner of the final file. [ At some point we probably want to move this ACL caching logic entirely into the VFS layer (and only call down to the filesystem when uncached), but in the meantime this improves ext3 a bit. A similar fix to btrfs makes a much bigger difference (15x improvement in lmbench) due to broken caching. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-15Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix compile error in arch/ia64/mm/extable.c
2009-06-15Merge branch 'timers-for-linus-migration' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: Logic to move non pinned timers timers: /proc/sys sysctl hook to enable timer migration timers: Identifying the existing pinned timers timers: Framework for identifying pinned timers timers: allow deferrable timers for intervals tv2-tv5 to be deferred Fix up conflicts in kernel/sched.c and kernel/timer.c manually
2009-06-15Merge branch 'timers-for-linus-clockevents' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevent: export register_device and delta2ns clockevents: tick_broadcast_device can become static
2009-06-15Merge branch 'timers-for-linus-clocksource' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: prevent selection of low resolution clocksourse also for nohz=on clocksource: sanity check sysfs clocksource changes
2009-06-15Merge branch 'timers-for-linus-ntp' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ntp: fix comment typos ntp: adjust SHIFT_PLL to improve NTP convergence
2009-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits) pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US ipv4: Fix fib_trie rebalancing Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver Bluetooth: Fix Kconfig issue with RFKILL integration PIM-SM: namespace changes ipv4: update ARPD help text net: use a deferred timer in rt_check_expire ieee802154: fix kconfig bool/tristate muckup bonding: initialization rework bonding: use is_zero_ether_addr bonding: network device names are case sensative bonding: elminate bad refcount code bonding: fix style issues bonding: fix destructor bonding: remove bonding read/write semaphore bonding: initialize before registration bonding: bond_create always called with default parameters x_tables: Convert printk to pr_err netfilter: conntrack: optional reliable conntrack event delivery list_nulls: add hlist_nulls_add_head and hlist_nulls_del ...
2009-06-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits) powerpc: Fix bug in move of altivec code to vector.S powerpc: Add support for swiotlb on 32-bit powerpc/spufs: Remove unused error path powerpc: Fix warning when printing a resource_size_t powerpc/xmon: Remove unused variable in xmon.c powerpc/pseries: Fix warnings when printing resource_size_t powerpc: Shield code specific to 64-bit server processors powerpc: Separate PACA fields for server CPUs powerpc: Split exception handling out of head_64.S powerpc: Introduce CONFIG_PPC_BOOK3S powerpc: Move VMX and VSX asm code to vector.S powerpc: Set init_bootmem_done on NUMA platforms as well powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock powerpc/mm: Fix some SMP issues with MMU context handling powerpc: Add PTRACE_SINGLEBLOCK support fbdev: Add PLB support and cleanup DCR in xilinxfb driver. powerpc/virtex: Add ml510 reference design device tree powerpc/virtex: Add Xilinx ML510 reference design support powerpc/virtex: refactor intc driver and add support for i8259 cascading powerpc/virtex: Add support for Xilinx PCI host bridge ...
2009-06-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator/max1586: fix V3 gain calculation integer overflow regulator/max1586: support increased V3 voltage range regulator: lp3971 - fix driver link error when built-in. LP3971 PMIC regulator driver (updated and combined version) regulator: remove driver_data direct access of struct device regulator: Set MODULE_ALIAS for regulator drivers regulator: Support list_voltage for fixed voltage regulator regulator: Move regulator drivers to subsys_initcall() regulator: build fix for powerpc - renamed show_state regulator: add userspace-consumer driver Maxim 1586 regulator driver
2009-06-15[IA64] fix compile error in arch/ia64/mm/extable.cRusty Russell
ad6561dffa17f17bb68d7207d422c26c381c4313 ("module: trim exception table on init free.") put a bogus trim_init_extable() function into ia64 which didn't compile. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-06-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits) nilfs2: support contiguous lookup of blocks nilfs2: add sync_page method to page caches of meta data nilfs2: use device's backing_dev_info for btree node caches nilfs2: return EBUSY against delete request on snapshot nilfs2: modify list of unsupported features in caveats nilfs2: enable sync_page method nilfs2: set bio unplug flag for the last bio in segment nilfs2: allow future expansion of metadata read out via get info ioctl NILFS2: Pagecache usage optimization on NILFS2 nilfs2: remove nilfs_btree_operations from btree mapping nilfs2: remove nilfs_direct_operations from direct mapping nilfs2: remove bmap pointer operations nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function nilfs2: move get block functions in bmap.c into btree codes nilfs2: remove nilfs_bmap_delete_block nilfs2: remove nilfs_bmap_put_block nilfs2: remove header file for segment list operations nilfs2: eliminate removal list of segments nilfs2: add sufile function that can modify multiple segment usages ...
2009-06-15regulator/max1586: fix V3 gain calculation integer overflowPhilipp Zabel
On Thu, May 28, 2009 at 10:59 AM, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote: > On Thu, May 28, 2009 at 07:15:16AM +0200, Philipp Zabel wrote: >> The V3 regulator can be configured with an external resistor >> connected to the feedback pin (R24 in the data sheet) to >> increase the voltage range. >> >> For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum >> V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency. >> >> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> > > Looks good. > > Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Thanks, but it turns out I hit a 32 bit integer overflow in the gain calculation. I'd like to mend that with the following patch. Now max_uV could be increased up to 4.294 V, enough to charge LiPo cells. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator/max1586: support increased V3 voltage rangePhilipp Zabel
The V3 regulator can be configured with an external resistor connected to the feedback pin (R24 in the data sheet) to increase the voltage range. For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: lp3971 - fix driver link error when built-in.Liam Girdwood
lp3971_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15LP3971 PMIC regulator driver (updated and combined version)Marek Szyprowski
This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: remove driver_data direct access of struct deviceGreg Kroah-Hartman
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: Set MODULE_ALIAS for regulator driversMark Brown
Several of the regulator drivers didn't have MODULE_ALIAS so couldn't be auto loaded. Add the MODULE_ALIAS in case they do get built as modules. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: Support list_voltage for fixed voltage regulatorMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: Move regulator drivers to subsys_initcall()Mark Brown
Regulators need to be available early in init in order to allow them to be available for consumers when requested. This is generally done by registering them at subsys_initcall() time but not all regulator drivers have done that. Convert these drivers to do so in order to mimimise future support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: build fix for powerpc - renamed show_stateLiam Girdwood
This patch fixes the follwing build failure on powerpc:- > Today's linux-next build (powerpc allyesconfig) failed like this: > > drivers/regulator/userspace-consumer.c:43: error: conflicting types > for 'show_state' > include/linux/sched.h:273: note: previous definition of 'show_state' > was here > > Caused by commit 5defa2bce704ca4151cfe24e4297aa7797cafd22 ("regulator: > add userspace-consumer driver") which I have reverted for today. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: add userspace-consumer driverMike Rapoport
The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15Maxim 1586 regulator driverRobert Jarzmik
The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-15pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2USJarek Poplawski
Let's use TICKS instead of US, so PSCHED_TICKS2NS and PSCHED_NS2TICKS (like in PSCHED_TICKS_PER_SEC already) to avoid misleading. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15ipv4: Fix fib_trie rebalancingJarek Poplawski
While doing trie_rebalance(): resize(), inflate(), halve() RCU free tnodes before updating their parents. It depends on RCU delaying the real destruction, but if RCU readers start after call_rcu() and before parent update they could access freed memory. It is currently prevented with preempt_disable() on the update side, but it's not safe, except maybe classic RCU, plus it conflicts with memory allocations with GFP_KERNEL flag used from these functions. This patch explicitly delays freeing of tnodes by adding them to the list, which is flushed after the update is finished. Reported-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14ramfs: ignore unknown mount optionsMike Frysinger
On systems where CONFIG_SHMEM is disabled, mounting tmpfs filesystems can fail when tmpfs options are used. This is because tmpfs creates a small wrapper around ramfs which rejects unknown options, and ramfs itself only supports a tiny subset of what tmpfs supports. This makes it pretty hard to use the same userspace systems across different configuration systems. As such, ramfs should ignore the tmpfs options when tmpfs is merely a wrapper around ramfs. This used to work before commit c3b1b1cbf0 as previously, ramfs would ignore all options. But now, we get: ramfs: bad mount option: size=10M mount: mounting mdev on /dev failed: Invalid argument Another option might be to restore the previous behavior, where ramfs simply ignored all unknown mount options ... which is what Hugh prefers. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Matt Mackall <mpm@selenic.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits) .gitignore: ignore *.lzma files kbuild: add generic --set-str option to scripts/config kbuild: simplify argument loop in scripts/config kbuild: handle non-existing options in scripts/config kallsyms: generalize text region handling kallsyms: support kernel symbols in Blackfin on-chip memory documentation: make version fix kbuild: fix a compile warning gitignore: Add GNU GLOBAL files to top .gitignore kbuild: fix delay in setlocalversion on readonly source README: fix misleading pointer to the defconf directory vmlinux.lds.h update kernel-doc: cleanup perl script Improve vmlinux.lds.h support for arch specific linker scripts kbuild: fix headers_exports with boolean expression kbuild/headers_check: refine extern check kbuild: fix "Argument list too long" error for "make headers_check", ignore *.patch files Remove bashisms from scripts menu: fix embedded menu presentation ...
2009-06-14.gitignore: ignore *.lzma filesArne Janbu
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTx IB/mlx4: Add strong ordering to local inval and fast reg work requests IB/ehca: Remove superfluous bitmasks from QP control block RDMA/cxgb3: Limit fast register size based on T3 limitations RDMA/cxgb3: Report correct port state and MTU mlx4_core: Add module parameter for number of MTTs per segment IB/mthca: Add module parameter for number of MTTs per segment RDMA/nes: Fix off-by-one bugs in reset_adapter_ne020() and init_serdes() infiniband: Remove void casts IB/ehca: Increment version number IB/ehca: Remove unnecessary memory operations for userspace queue pairs IB/ehca: Fall back to vmalloc() for big allocations IB/ehca: Replace vmalloc() with kmalloc() for queue allocation
2009-06-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/headers-check-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/headers-check-2.6: headers_check fix: mn10300, setup.h headers_check fix: mn10300, ptrace.h
2009-06-14fusion: fix recent kernel-doc problemsRandy Dunlap
Fix recent fusion driver kernel-doc fatal error and warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric.Moore@lsi.com Cc: support@lsi.com Cc: DL-MPTFusionLinux@lsi.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14keyboard: advertise KT_DEAD2 extended diacriticalsSamuel Thibault
In addition to KT_DEAD which has limited support for diacriticals, there is KT_DEAD2 that can support 256 criticals, so let's advertise it in <linux/keyboard.h>. This lets userland know abut the drivers/char/keyboard.c function k_dead2, which supports more than the few trivial ones that k_dead supports. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14kbuild: add generic --set-str option to scripts/configMichal Marek
Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-14kbuild: simplify argument loop in scripts/configMichal Marek
Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-14kbuild: handle non-existing options in scripts/configMichal Marek
If an option does not exist in .config, set it at the end of the file. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits) atmel-mci: add MCI2 register definitions atmel-mci: Integrate AT91 specific definition in header file tmio_mmc: allow compilation for ASIC3 mmc_block: do not DMA to stack sdhci: Print ADMA status and pointer on debug tmio_mmc: fix clock setup tmio_mmc: map SD control registers after enabling the MFD cell tmio_mmc: correct probe return value for num_resources != 3 tmio_mmc: don't use set_irq_type tmio_mmc: add bus_shift support MFD,mmc: tmio_mmc: make HCLK configurable mmc_spi: don't use EINVAL for possible transmission errors cb710: more cleanup for the DEBUG case. sdhci: platform driver for SDHCI mxcmmc: remove frequency workaround cb710: handle DEBUG define in Makefile cb710: add missing parenthesis cb710: fix printk format string mmc: Driver for CB710/720 memory card reader (MMC part) pxamci: add regulator support. ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix inverted wheel for bluetooth version of apple mighty mouse HID: no more reinitializtion is needed in post_reset HID: hidraw -- fix comment about accepted devices HID: Multitouch support for the N-Trig touchscreen HID: add new multitouch and digitizer contants HID: autocentering support for Logitech Force 3D Pro HID: fix hid-ff drivers so that devices work even without ff support HID: force feedback support for SmartJoy PLUS PS2/USB adapter HID: Wacom Graphire Bluetooth driver HID: autocentering support for Logitech G25 Racing Wheel
2009-06-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5545/2: add flush_kernel_dcache_page() for ARM
2009-06-14kallsyms: generalize text region handlingMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-14kallsyms: support kernel symbols in Blackfin on-chip memoryRobin Getz
The Blackfin arch has a discontiguous .text layout due to having on-chip instruction memory and no virtual memory support. As such, we need to add explicit checks for these additional .text regions. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-14documentation: make version fixAdam Lackorzynski
The Makefiles in the build directories use the internal make variable MAKEFILE_LIST which is available from make 3.80 only. (The patch would be valid back to 2.6.25) Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>