aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-10[ARM] 5113/1: PXA SSP: Additional register definitions for PXA3xx SSPMark Brown
Also add some white space for a little clarity. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5112/1: PXA SSP: Strip in-code changelogMark Brown
It's not been updated in quite some time and we now have git for history. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5110/1: PXA SSP: Remember the platform device on probe()Mark Brown
pdev is used later on by dev_printk() so must be set. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5108/2: PXA SSP: Don't unconditionally free interruptMark Brown
Callers may stop the SSP core requesting the interrupt so it can't be freed unconditionally. Also use NO_IRQ like we should. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add support for L2 outer cache on XScale3Eric Miao
The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add simple gpio debug LEDs support for zyloniteEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add GPIO expander (PCA9539) support for zyloniteEric Miao
And also reserve 32 IRQs for the two GPIO expanders. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add pxa3xx NAND support for littletonEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add pxa3xx NAND support for zyloniteEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add pxa3xx NAND device and clock sourcesEric Miao
A pxa3xx_set_nand_info() is also introduced to set the PXA3xx NAND driver specific platform_data structure pointer. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: move pxa310 specific MMC3 clk out of generic pxa3xx.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: make PXA3xx_CK() and PXA3xx_CKEN() public in clock.heric miao
So processor specific clock sources can be defined in pxa300.c and pxa320.c. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add pxa2xx_mfp_set_lpm() to facilitate low power state changeEric Miao
Some boards want to change low power state of pins on-the-fly, this function helps to facilitate that operation instead of switching back-n-forth between two configurations with pxa2xx_mfp_config(). Signed-off-by: Eric Miao <eric.miao@marvell.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: introduce dedicated __mfp_validate() to check PXA2xx MFPEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: embed body of pxa320_init_mfp()Eric Miao
pxa320_init_mfp() is simple enough to be embedded into pxa320_init() to simplify the code a bit. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: allow display of uncompress message through STUARTEric Miao
Some boards use UART other than FFUART for the console, E.g. Marvell PXA3xx Form Factor Platform (aka Littleton) uses STUART. This patch modifies the uncompress.h so that display of the uncompress message is routed to the STUART. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: remove WAKEUP_ON_LEVEL_HIGH from keypad direct keysEric Miao
Setting PKWR bits on those pins will make the resuming from low power state to fail. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: fix typo of CONFIG_*_MODULEEric Miao
The correct macro name when a driver is built as a module is CONFIG_*_MODULE instead of CONFIG_*_MODULES. This patch fixes this in several places. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: use IORESOURCE_IRQ_* instead of IRQF_* for IRQ resourceEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add codename zylonite for PXA3xx Development PlatformEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing oneDmitry Baryshkov
unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5142/1: pxa: move move zaurus declarations to proper placeDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi ↵Guennadi Liakhovetski
platform devices Add a function to dynamically allocate and register pxa2xx-spi platform devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and lubbock to use it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5084/1: zylonite: Register AC97 deviceMark Brown
The Zylonite has an AC97 subsystem on it so register the AC97 controller device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5085/2: PXA: Move AC97 over to the new central device declaration modelMark Brown
As well as moving all the device declarations to a single one in devices.c this causes all platforms to register the I/O and interrupt resources for the AC97 controller. Cc: eric miao <eric.miao@marvell.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Jürgen Schindele <linux@schindele.name> Cc: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC ↵Philipp Zabel
drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin settingDmitry Baryshkov
is handled in board code Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5145/1: PXA2xx: provide api to control IrDA pins stateDmitry Baryshkov
Provide a set of functions to control state of pins dedicated to IrDA. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5144/1: pxaficp_ir: cleanup includesDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: remove pxa_set_cken()Russell King
pxa_set_cken() is now unused, remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09Merge branches 'pxa-misc', 'pxa-pwm' and 'pxa-multi' into pxaRussell King
2008-07-09[ARM] pxa: allow clk aliasesRussell King
We need to support more than one name+device for a struct clk for a small number of peripherals. We do this by re-using struct clk alias to another struct clk - IOW, if we find that the entry we're using is an alias, we return the aliased entry not the one we found. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5079/1: Warn people when using pxa2xx-gpio.hStefan Schmidt
Warn people when using pxa2xx-gpio.h as it is only here for backwards compatibility. The new mfp-pxa2[57]x.h and the relevant API should be used instead. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5135/1: pxa: drop superfluous asm/arch/pxa2xx-gpio.h includesPhilipp Zabel
Both i2c-pxa.c and irq.c still include pxa2xx-gpio.h although is is not needed anymore. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5118/1: pxafb: add exit and remove handlersJaya Kumar
This patch adds exit and remove handlers to pxafb so that it can be loaded and unloaded as a module. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5063/1: pxa: add clk support for pxa2xx I2Seric miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5094/1: pcm990: Add framebuffer and backlight supportGuennadi Liakhovetski
PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5045/1: magician: use the pwm_bl driver for the LCD backlightPhilipp Zabel
magician has a GPIO that modifies the brightness level additionally to the PWM duty value. This patch makes use of the pwm_bl notify callback to present userspace with a single brightness scale. This gets rid of the pxa_set_cken calls and direct PWM register access. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5141/1: PWM: pwm_request() should return an PTR_ERR() instead of NULL.Ben Dooks
Make the return of pwm_request() be more informative than just being NULL on error by using PTR_ERR() to respond with an approriate error. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5044/1: pwm_bl: add init/notify/exit callbacksPhilipp Zabel
This allows platform code to manipulate GPIOs and brightness level as needed. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] pxa: make LogicPD 270 use the generic PWM backlight driverRussell King
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] pxa: make mainstone use the generic PWM backlight driverRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] pxa: make zylonite use the generic PWM backlight drivereric miao
Patch mostly by Eric Miao, minor edits by rmk. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] pxa: add generic PWM backlight drivereric miao
Patch mostly from Eric Miao, with minor edits by rmk to convert Eric's driver to a generic PWM-based backlight driver. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5087/1: Get the PWM layer to handle clock enable/disable properly.Robert Jarzmik
Allow pwm_enable()/pwm_disable() to be called as many times as the driver wants (and not even count them). The PWM model is different from things like the clock API where we need enable counting, because PWMs have one exclusive user per PWM whereas the clock API can have multiple users of the same clock. Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5078/1: pxa-pwm: Add missing MODULE_LICENSE to be able to build the driverGuennadi Liakhovetski
as a module Without a GPL-compatible license this driver cannot be built as a module, because the platform_driver_* API is only exported to GPL modules. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5136/1: pxa: fix PWM device order for pxa27xPhilipp Zabel
Currently PWM0/2 (pxa27x_device_pwm0 at 0x40b00000 and 0x40b00010 are registered as as pwm_id 0 and 1, PWM1/3 (pxa27x_device_pwm1 at 0x40c00000 and 0x40c00010) are registered as pwm_id 2 and 3. This patch corrects the pwm_ids to match the documented register names. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-15[ARM] 5082/1: pxa: Definition for the third USB port control register UP3OCRStefan Schmidt
This adds the definition for the third USB port control register UP3OCR. It is used on the EZX GSM mobile phones. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-15[ARM] 5080/1: touch PSSR_OTGPH only on pxa27x in ohci-pxa27x and pxa27x_udcPhilipp Zabel
and include pxa2xx-regs.h as build fix since PSSR definitions moved from pxa-regs.h into pxa2xx-regs.h. Note: This change is temporary as pxa27x processor specific code will be finally moved elsewhere (both drivers should support pxa3xx, too). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5071/2: Drop PXA_SHARPSL_25x/27x case from PXA Kconfig.Dmitry Baryshkov
As nothing in the code references to the PXA_SHARPSL_25x/27x, we can drop that Kconfig case and permit all-zaurus builds. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 23:46:50 +0000