aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-10omap mmc: Remove broken MMC init codeTony Lindgren
Most of the omap1 MMC boards got broken by an earlier patch 138ab9f8321f67c71984ca43222efa71b0a0a0a9. If you look closely, the MMC init funtions are pretty much just stubs. Remove broken init code to make room for cleaner MMC init code. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: Pin multiplexing updates for 24xx and 34xxArun KS
This patch adds some new pin multiplexing options for McBSP and McSPI from Arun KS. Also add two more GPIOs from David Brownell. Also mark omap24xx_cfg_reg() static. Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: Add basic support for Pandora handheld consoleGrazvydas Ignotas
This patch adds support for basic features: uarts, i2c, and rtc. Also includes defconfig. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: DMA: Fix for sDMA Errata 1.113Santosh Shilimkar
SDMA channel is not disabled after transaction error. So explicitly disable it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked By : Nishant kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeessStanley.Miao
Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs successfully. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
2008-12-10ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helperJarkko Nikula
- Simplify function omap_i2c_mux_pins - Add OMAP34xx pin multiplexing for busses 1 - 3 Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: Warn about spurious interruptsTony Lindgren
In the case of spurious interrupt, the handler for previous interrupt handler needs to flush posted writes with a read back of the interrupt ack register. Warn about handlers that need to flush posted writes. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: skip unnecessary TLDR write during non-autoreload for gptimerPaul Walmsley
The GPTIMER TLDR register does not need to be written if the GPTIMER is not in autoreload mode. This is the usual case for dynamic tick-enabled kernels. Simulation data indicate that skipping the read that occurs as part of the write should save at least 300-320 ns for each GPTIMER1 timer reprogram. (This assumes L4-Wakeup is at 19MHz and GPTIMER write posting is enabled.) Skipping the write itself probably won't have much impact since it should be posted on the OCP interconnect. Tested on 2430SDP and 3430SDP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: drop redundant pending write check for gptimerPaul Walmsley
omap_dm_timer_write_reg() already waits for pending writes to complete, so the extra wait in omap_dm_timer_set_load() is superfluous. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: bard-h4: list those eepromsDavid Brownell
Declare the two 1Kbit EEPROMs included in the H4 board stack. One is on the CPU card; the other is on the mainboard. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Use omap_rev() instead of system_revLauri Leukkunen
system_rev is meant for board revision, this patch changes all relevant instances to use the new omap_rev() function liberating system_rev to be used with ATAG_REVISION as it has been designed. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Fix cpu detectionTony Lindgren
At some point omap2 changed the bits for GET_OMAP_CLASS, which broke 15xx detection on 730 as noticed by Russell King. This patch fixes omap2 cpu detection to respect the original GET_OMAP_CLASS, and simplifies the detection for 34xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Prepare cpu detection for further improvementsTony Lindgren
Rename omap2_check_revision to omap24xx_check_revision. Then next patch will split if further and add omap34xx_check_revision. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP1: osk5912: LED trigger update for CFDavid Brownell
Help OSK work better with root-on-CF, by having one of the LEDs use the "ide-disk" trigger (to kick in during CF I/O). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP1: osk5912: Mistral eeprom supportDavid Brownell
List the 4 Kbit I2C EEPROM included on the Mistral board. Also add a comment about the hardware workaround needed to properly support the WAKE button. More info at http://elinux.org/OSK_Mistral_wakeup_button_mod Still no support for the (optional) camera sensor. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Switch ohci-omap to gpio_request/free callsJarkko Nikula
Switch to gpio_request/free calls Cc: linux-usb@vger.kernel.org Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Switch to gpio_request/free callsJarkko Nikula
Switch to gpio_request/free calls Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: minor gpio bugfixesDavid Brownell
Minor GPIO fixes: - If get_gpio_bank() fails, then BUG() out. - In omap_set_gpio_debounce(): * protect the read/modify/write with the relevant spinlock * make the omap3 clock ops pass "sparse" checking Except for the spinlock problem, these were reported through "make". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: make legacy gpio request/free calls superfluousJarkko Nikula
Clean up OMAP GPIO request/free functions - Rename and declare static OMAP specific GPIO request/free functions - Register them into gpiolib as chip-specific hooks - Add omap_request_gpio/omap_free_gpio wrappers for existing code not converted yet to use gpiolib Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> [ dbrownell@users.sourceforge.net: remove needless check_gpio() calls ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: use gpio_to_irqDavid Brownell
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead. Calls used for table initialization are left alone, at least this time around. (This patch is for code in both the OMAP tree and mainline.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to gpio_direction_outputDavid Brownell
More conversion to the standard GPIO interfaces: stop using omap_set_gpio_direction() entirely, and switch over to the gpio_direction_output() call. Note that because gpio_direction_output() includes the initial value, this change isn't quite transparent. - For the call sites which defined an initial value either before or after setting the direction, that value was used. When that value was previously assigned afterwards, this could eliminate a brief output glitch ... and possibly change behavior. In a few cases (LCDs) several values were assigned together ... those were re-arranged to match the explicit sequence provided. - Some call sites didn't define such a value; so I chose an initial "off/reset" value that seemed to default to "off". In short, files touched by this patch might notice some small changes in startup behavior (with trivial fixes). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to gpio_direction_inputDavid Brownell
More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to standard gpio get/set callsDavid Brownell
This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: gpios implement new to_irq()David Brownell
Make OMAP use the new __gpio_to_irq() hook, to make it easier to support IRQs coming in from off-chip gpio controllers like the TWL4030/TPS65930 chip used on OMAP3 boads like Beagleboard.org and the Gumstix Overo. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Extend gpio label column width in omap_gpio debugfs fileJarkko Nikula
There are already various drivers having bigger label than 10 bytes. Most of them fit well under 20 bytes but make column width exact so that oversized labels don't mess up output alignment. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3Jouni Hogander
This patch changes gpio "driver" to enable debounce clock for gpio-bank only when debounce is enabled for some gpio in that bank. Gpio functional clocks are also renamed in clock tree, gpioX_fck -> gpioX_dbck. This patch triggers problem with gpio wake-up and Omap3. Gpios in PER domain aren't capable to generate wake-up if PER domain is in sleep state. For this iopad wake-up should be used and needed pad configuration should be done. Enabling iopad wake-up for gpio pads is left for bootloader or omap mux configuration in kernel. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10Linux 2.6.28-rc8Linus Torvalds
2008-12-10Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: CPU remove deadlock fix
2008-12-10fix mapping_writably_mapped()Hugh Dickins
Lee Schermerhorn noticed yesterday that I broke the mapping_writably_mapped test in 2.6.7! Bad bad bug, good good find. The i_mmap_writable count must be incremented for VM_SHARED (just as i_writecount is for VM_DENYWRITE, but while holding the i_mmap_lock) when dup_mmap() copies the vma for fork: it has its own more optimal version of __vma_link_file(), and I missed this out. So the count was later going down to 0 (dangerous) when one end unmapped, then wrapping negative (inefficient) when the other end unmapped. The only impact on x86 would have been that setting a mandatory lock on a file which has at some time been opened O_RDWR and mapped MAP_SHARED (but not necessarily PROT_WRITE) across a fork, might fail with -EAGAIN when it should succeed, or succeed when it should fail. But those architectures which rely on flush_dcache_page() to flush userspace modifications back into the page before the kernel reads it, may in some cases have skipped the flush after such a fork - though any repetitive test will soon wrap the count negative, in which case it will flush_dcache_page() unnecessarily. Fix would be a two-liner, but mapping variable added, and comment moved. Reported-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10Merge branch 'to-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: tracehook: exec double-reporting fix
2008-12-10lib/idr.c: Fix bug introduced by RCU fixManfred Spraul
The last patch to lib/idr.c caused a bug if idr_get_new_above() was called on an empty idr. Usually, nodes stay on the same layer. New layers are added to the top of the tree. The exception is idr_get_new_above() on an empty tree: In this case, the new root node is first added on layer 0, then moved upwards. p->layer was not updated. As usual: You shall never rely on the source code comments, they will only mislead you. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: Give correct size when reserving interrupt vector tableAkira Takeuchi
Give the correct size when reserving the interrupt vector table. It should be a page not a single byte. Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: Fix __put_user_asm8()Akira Takeuchi
Fix __put_user_asm8() by jumping to the end label (3:) from the exception handler, rather than jumping back to retry the second store instruction (label 2:). Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: Fix the preemption resume_kernel() routineAkira Takeuchi
Fix the preemption resume_kernel() routine by inverting the test to see whether interrupts are off (IM7 is all enabled, not all disabled). Furthermore, interrupts should be disabled on entry to resume_kernel() so that they're correctly set for jumping to restore_all() and doing the need reschedule test. Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: Discard low-priority Tx interrupts when closing an on-chip serial portAkira Takeuchi
Discard low-prioriy Tx interrupts when closing an MN10300 on-chip serial port. The MN10300 on-chip serial port uses three interrupts to manage its serial ports: (1) A very high priority interrupt that drives virtual DMA for Rx. (2) A very high priority interrupt that drives virtual DMA for Tx. (3) A normal priority virtual interrupt that does the normal UART interrupt stuff and is shared between Rx and Tx. mn10300_serial_stop_tx() only disables the high priority Tx interrupt. It doesn't also disable the normal priority one because it is shared with Rx. However, the high priority interrupt may interrupt local_irq_disabled() sections, and so may have queued up a low priority virtual interrupt whilst the UART driver is asking for the Tx interrupt to be disabled. The result of this can be an oops when we try to process the interrupt in mn10300_serial_transmit_interrupt() as port->uart.info and port->uart.info->tty may have gone away. To deal with this, if either of those pointers is NULL, we make sure the high-priority Tx interrupt is disabled and discard the interrupt. The low priority interrupt is disabled by the mn10300_serial_pic irq_chip table. Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: vmlinux.lds.S cleanup - use PAGE_SIZE, PERCPU macrosCyrill Gorcunov
Include the linux/page.h header into the MN10300 kernel linker script thus allowing us to use PAGE_SIZE macro instead of a numeric constant. Also use the PERCPU macro instead of an explicit section definition. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Disallow cryptomgr as a module if algorithms are built-in
2008-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch PCI: stop leaking 'slot_name' in pci_create_slot
2008-12-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SN: prevent IRQ retargetting in request_irq() [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule [IA64] Clear up section mismatch for ioc4_ide_attach_one. [IA64] Clear up section mismatch with arch_unregister_cpu() [IA64] Clear up section mismatch for sn_check_wars. [IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel. [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE [IA64] eliminate NULL test and memset after alloc_bootmem [IA64] remove BUILD_BUG_ON from paravirt_getreg()
2008-12-10Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Better than nothing implementation of PCI mmap to fix X.
2008-12-10pktcdvd: remove broken dev_t export of class devicesKay Sievers
The pktcdvd created class devices only export some sysfs files, but have no char dev_t registered in the driver. At class device creation time they copy the dev_t value of the block device to the char device, wich will register a new char device in the driver core and userspace, with a conflicting dev_t value. In many cases the class devices dev_t just points to a random USB device. This fixes the sysfs "duplicate entry" errors. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Peter Osterlund <petero2@telia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-ohci: fix IOMMU resource exhaustion ieee1394: node manager causes up to ~3.25s delay in freezing tasks
2008-12-10drivers/video/mb862xx/mb862xxfb.c: fix printkAndrew Morton
sparc64: drivers/video/mb862xx/mb862xxfb.c:929: warning: long long unsigned int format, resource_size_t arg (arg 4) drivers/video/mb862xx/mb862xxfb.c:931: warning: long long unsigned int format, resource_size_t arg (arg 4) We don't know what type the architecture uses to implement u64, hence they cannot be printed. Cc: Anatolij Gustschin <agust@denx.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matteo Fortini <m.fortini@selcomgroup.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10KSYM_SYMBOL_LEN fixesHugh Dickins
Miles Lane tailing /sys files hit a BUG which Pekka Enberg has tracked to my 966c8c12dc9e77f931e2281ba25d2f0244b06949 sprint_symbol(): use less stack exposing a bug in slub's list_locations() - kallsyms_lookup() writes a 0 to namebuf[KSYM_NAME_LEN-1], but that was beyond the end of page provided. The 100 slop which list_locations() allows at end of page looks roughly enough for all the other stuff it might print after the symbol before it checks again: break out KSYM_SYMBOL_LEN earlier than before. Latencytop and ftrace and are using KSYM_NAME_LEN buffers where they need KSYM_SYMBOL_LEN buffers, and vmallocinfo a 2*KSYM_NAME_LEN buffer where it wants a KSYM_SYMBOL_LEN buffer: fix those before anyone copies them. [akpm@linux-foundation.org: ftrace.h needs module.h] Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc Miles Lane <miles.lane@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10inotify: fix IN_ONESHOT unmount event watcherDmitri Monakhov
On umount two event will be dispatched to watcher: 1: inotify_dev_queue_event(.., IN_UNMOUNT,..) 2: remove_watch(watch, dev) ->inotify_dev_queue_event(.., IN_IGNORED, ..) But if watcher has IN_ONESHOT bit set then the watcher will be released inside first event. Which result in accessing invalid object later. IMHO it is not pure regression. This bug wasn't triggered while initial inotify interface testing phase because of another bug in IN_ONESHOT handling logic :) commit ac74c00e499ed276a965e5b5600667d5dc04a84a Author: Ulisses Furquim <ulissesf@gmail.com> Date: Fri Feb 8 04:18:16 2008 -0800 inotify: fix check for one-shot watches before destroying them As the IN_ONESHOT bit is never set when an event is sent we must check it in the watch's mask and not in the event's mask. TESTCASE: mkdir mnt mount -ttmpfs none mnt mkdir mnt/d ./inotify mnt/d& umount mnt ## << lockup or crash here TESTSOURCE: /* gcc -oinotify inotify.c */ #include <stdio.h> #include <stdlib.h> #include <sys/inotify.h> int main(int argc, char **argv) { char buf[1024]; struct inotify_event *ie; char *p; int i; ssize_t l; p = argv[1]; i = inotify_init(); inotify_add_watch(i, p, ~0); l = read(i, buf, sizeof(buf)); printf("read %d bytes\n", l); ie = (struct inotify_event *) buf; printf("event mask: %d\n", ie->mask); return 0; } Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Robert Love <rlove@google.com> Cc: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10atomic: fix a typo in atomic_long_xchg()Eric Dumazet
atomic_long_xchg() is not correctly defined for 32bit arches. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10mm: no get_user/put_user while holding mmap_sem in do_pages_stat?Brice Goglin
Since commit 2f007e74bb85b9fc4eab28524052161703300f1a, do_pages_stat() gets the page address from user-space and puts the corresponding status back while holding the mmap_sem for read. There is no need to hold mmap_sem there while some page-faults may occur. This patch adds a temporary address and status buffer so as to only hold mmap_sem while working on these kernel buffers. This is implemented by extracting do_pages_stat_array() out of do_pages_stat(). Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Cc: Christoph Lameter <clameter@sgi.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10drivers/serial/s3c2440.c: fix typo in MODULE_LICENSEBalaji Rao
Signed-off-by: Balaji Rao <balajirrao@gmail.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10pagemap: fix 32-bit pagemap regressionMatt Mackall
The large pages fix from bcf8039ed45 broke 32-bit pagemap by pulling the pagemap entry code out into a function with the wrong return type. Pagemap entries are 64 bits on all systems and unsigned long is only 32 bits on 32-bit systems. Signed-off-by: Matt Mackall <mpm@selenic.com> Reported-by: Doug Graham <dgraham@nortel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: <stable@kernel.org> [2.6.26.x, 2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10page_cgroup should ignore empty nodesKAMEZAWA Hiroyuki
Fix a total bootup freeze on ia64. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Li Zefan <lizf@cn.fujitsu.com> Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>