aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-29ath9k: introduce bus specific cache size routineGabor Juhos
The PCI specific bus_read_cachesize routine won't work on the AHB bus, we have to replace it with a suitable one later. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: convert to use bus-agnostic DMA routinesGabor Juhos
Convert to use bus-agnostic DMA routines to make it usable on AHB bus as well. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: convert to struct deviceGabor Juhos
Convert 'struct pci_dev' to 'struct device' to make it usable on the AHB bus as well. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: report killswitch changes even if the interface is downHelmut Schaa
Currently iwl3945 is not able to report hw-killswitch events while the interface is down. This has implications on user space tools (like NetworkManager) relying on rfkill notifications to bring the interface up once the wireless gets enabled through a hw killswitch. Thus, enable the device already in iwl3945_pci_probe instead of iwl3945_up and poll the CSR_GP_CNTRL register to update the killswitch state every two seconds. The polling is only needed on 3945 hardware as this adapter does not use interrupts to signal rfkill changes to the driver (in case no firmware is loaded). The firmware loading is still done in iwl3945_up. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29prism54: remove private implementation of le32_add_cpuHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Eliminate compilation warning in b43_op_set_keyLarry Finger
A recent pull from wireless testing generates the following warning: CC [M] drivers/net/wireless/b43/main.o drivers/net/wireless/b43/main.c: In function ‘b43_op_set_key’: drivers/net/wireless/b43/main.c:3636: warning: pointer type mismatch in conditional expression This fix was suggested by Johannes Berg <johannes@sipsolutions.net>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Use a defined value for pci_set_power_state()Jouni Malinen
Silence sparse by using a defined value PCI_D3hot instead of a magic constant in a pci_set_power_state() call. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29nl80211: Fix documentation errorsJouni Malinen
Couple of '_ATTR's were missing and SEC_CHAN_OFFSET to CHANNEL_TYPE rename was missed in couple of places. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: discard 11g caps if reported by an ar5211 eepromHelmut Schaa
At least one ar5211 card (GIGABYTE GN-WLMA101, 168c:0012 subsystem 1458:e800) reports itself as 11g capable which seems to be a bug in the eeprom. initvals.c assumes that ar5211 is only 11b capable and thus refuses to initialize this card. Hence this patch changes the probing for 11g capabilities to discard 11g capabilities for ar5211 cards which allows this specific card to work fine in 11b and 11a modes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: p54spi driverChristian Lamparter
This patch adds the p54spi driver. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: stlc45xx eeprom blobChristian Lamparter
Usually every prism54 design hardware has a tiny eeprom chip in which all device specific data for calibration and link-tuning is stored. The stlc45xx chips are the only exception. They are made for embedded devices, where space is scarce. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: longbow frontend supportChristian Lamparter
This patch adds support for longbow RF chip. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: prepare the eeprom parser routines for longbowChristian Lamparter
This patch adds support to upload pre-calculated calibration data to the firmware. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rxBob Copeland
Under memory pressure, we may not be able to allocate a new skb for new packets. If the allocation fails, ath5k_tasklet_rx will exit but will leave a buffer in the list with a NULL skb, eventually triggering a BUG_ON. Extract the skb allocation from ath5k_rxbuf_setup() and change the tasklet to allocate the next skb before accepting a packet. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix basic connectivity issueVasanthakumar Thiagarajan
This patch temporarily fixes a regression introduced by BT coexistence support. There is an instability in connection when BT coexistence is enabled on some h/w. This interim fix introduces a module parameter for BT coexistence configuration. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2400,rt2500: init led_qual for LED_MODE_DEFAULTAndrew Price
Add a check for LED_MODE_DEFAULT so that we use the link LED for rt2400 and rt2500 devices. Signed-off-by: Andrew Price <andy@andrewprice.me.uk> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: Fix radiotap header it_present on big endian CPUsJouni Malinen
When the IEEE80211_RADIOTAP_RATE flag was moved to be conditional, it was mistakenly left without cpu_to_le32(). Fix that. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: Mark ieee80211_process_sa_query_req() staticJouni Malinen
This function is only used within rx.c, so mark it static. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: if_spi, driver for libertas GSPI devicesColin McCabe
Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: upgrade memrecord to p54_tx_infoChristian Lamparter
mac80211 reserves 24 bytes in skb->cb for the driver. So far, we only used them to keep track of used and free device memory. But p54spi will need a slice of it, as well as the stuck frame detection. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: refactor p54_alloc_skbChristian Lamparter
Old firmwares had no problems processing frames which filled eighth of the memory window. However we have to be a bit more careful with fat frames when we talk to new firmwares. Apart from that, I confess the old logic was a bit weird and not very sophisticated. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: document return codes from ops callbacksBob Copeland
For any callbacks in ieee80211_ops, specify what values the return codes represent. While at it, fix a couple of capitalization and punctuation differences. Signed-off-by: Bob Copeland <me@bobcopeland.com> Reviewed-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29IWL: fix WARN typoJiri Slaby
new kew -> a new key Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: Update libertas core with GSPI constantsColin McCabe
Add GSPI constants to libertas core. Fix misleading comment in lbs_setup_firmware. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Fix iwl3945_init_drv()Samuel Ortiz
iwl3945_init_drv() initialises the wrong lock, and sets the wrong power saving default level. With this power saving mode, we are losing a lot of frames in Ad-Hoc mode. This is a bug fix for bug #1873. ( http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1873 ) Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: Handle power constraint level advertised in 11d+h beaconVasanthakumar Thiagarajan
This patch uses power constraint level while determining the maximum transmit power, there by it makes sure that any power mitigation requirement for the channel in the current regulatory domain is met. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: update copyright year to 2009Reinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Change crypto parameter nameSamuel Ortiz
Now that we're using iwl_mod_params, we want our module parameters names to be in sync with the structure. So, to set iwl_mod_params.sw_crypto, we'd better use a "swcrypto" parameter name instead of the "hwcrypto" current one. Moreover, by setting the decrypted flag properly, this patch also fixes the HW crypto path for 3945 (the current code is not setting it when running HW crypto). This is a bug fix for bug #1872 ( http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1872 ) Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: use hw_params.rx_buf_sizeWinkler, Tomas
This patch makes 3945 use of hw_params.rx_buf_size instead of IWL_RX_BUF_SIZE. It also renames IWL_RX_BUF_SIZE to IWL_RX_BUF_SIZE_3K and moves rx buffer defines into iwl-fh.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: remove double defined 3945 tfd structuresWinkler, Tomas
This patch removes doubly defined struct iwl3945_tfd_frame_data and struct iwl3945_tfd_frame. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_x2_queue_usedWinkler, Tomas
This patch replaces iwl3945_x2_queue_used with iwl_queue_used. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_rx_queue_spaceWinkler, Tomas
This patch replaces iwl3945_rx_queue_space with iwl_rx_queue_space. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_rx_queue_restockWinkler, Tomas
This patch kills iwl3945_rx_queue_restock function on prise of new hw_params.rx_wrt_ptr_reg which holds per NIC RX write pointer register. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill hw_params.tx_ant_numWinkler, Tomas
This patch removes tx_ant_num for hw_params structure. It is not used. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211_hwsim: Report driver as MFP capableJouni Malinen
mac80211_hwsim has no problems with MFP, so report it as MFP capable. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Setup MFP options for CCMPJouni Malinen
Configure hardware CCMP for management frame protection and use software crypto when needed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix set_key error codesJouni Malinen
Return -EOPNOTSUPP if the algorithm is not supported and -ENOSPC if there is no room in the key cache. This avoids KERN_ERR printk in mac80211 for "errors" that are actually expected to happen in normal operating conditions. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Add driver capability flag for MFPJouni Malinen
This allows user space to determine whether a driver supports MFP and behave properly without having to ask user to configure this in MFP-optional mode. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Optional software CCMP for management framesJouni Malinen
If driver/firmware/hardware does not support CCMP for management frames, it can now request mac80211 to take care of encrypting and decrypting management frames (when MFP is enabled) in software. The will need to add this new IEEE80211_KEY_FLAG_SW_MGMT flag when a CCMP key is being configured for TX side and return the undecrypted frames on RX side without RX_FLAG_DECRYPTED flag to use software CCMP for management frames (but hardware for data frames). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Implement Association Comeback processingJouni Malinen
When MFP is enabled, the AP does not allow a STA to associate if an existing security association exists without first going through SA Query process. When this happens, the association request is denied with a new status code ("temporarily rejected") ans Association Comeback IE is used to notify when the association may be tried again (i.e., when the SA Query procedure has timed out). Use the comeback time to update the mac80211 client MLME timer for next association attempt to minimize waiting time if association is temporarily rejected. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Drop unprotected robust management frames if MFP is usedJouni Malinen
Use ieee80211_drop_unencrypted() to decide whether a received frame should be dropped with management frames, too. If MFP is negotiated, unprotected robust management frames will be dropped. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Do not force Action frames to disable encryptionJouni Malinen
When sending out Action frames, allow ieee80211_tx_skb() to send them without enforcing do_not_encrypt. These frames will be encrypted if MFP has been negotiated. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - SA Query processingJouni Malinen
Process SA Query Requests for client mode in mac80211. AP side processing of SA Query Response frames is in user space (hostapd). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Configuration of MFP disabled/optional/requiredJouni Malinen
Add new WEXT IW_AUTH_* parameter for setting MFP disabled/optional/required. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - WEXT configuration for IGTKJouni Malinen
Added new SIOCSIWENCODEEXT algorithm for configuring BIP (AES-CMAC) keys (IGTK). Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - WEXT parameter for setting mgmt cipherJouni Malinen
Add a new IW_AUTH parameter for setting cipher suite for multicast/broadcast management frames. This is for full-mac drivers that take care of RSN IE generation for (re)association request frames. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Use BIP (AES-128-CMAC)Jouni Malinen
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Add BIP (AES-128-CMAC)Jouni Malinen
Implement Broadcast/Multicast Integrity Protocol for management frame protection. This patch adds the needed definitions for the new information element (MMIE) and implementation for the new "encryption" type (though, BIP is actually not encrypting data, it provides only integrity protection). These routines will be used by a follow-on patch that enables BIP for multicast/broadcast robust management frames. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - CCMP for management framesJouni Malinen
Extend CCMP to support encryption and decryption of unicast management frames. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - STA flag for MFPJouni Malinen
Add flags for setting STA entries and struct ieee80211_if_sta to indicate whether management frame protection (MFP) is used. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-03 09:20:55 +0000