| Age | Commit message (Collapse) | Author |
|---|
|
The driver was moved during the merge process, so update the defines to
match the new location.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Avoid including unnecessary headers all the time as well as circular
includes with core requirements.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
All the arches define a helper macro to make things easy for driver code.
Reported-by: Frank Van Hooft <frank@frankvh.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system. Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Have the C API trace funcs match the assembly API trace funcs.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
PLL_LOCKCNT applies only to the PLL programming sequence which does not
apply to core and system clock dividers. Writes to PLL_DIV to change the
CSEL/SSEL dividers take effect immediately.
There is still overhead in software in writing the new dividers, so just
use a value of 50us as this should be good enough.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into
mainline and it was a bad interface into the board resources. For boards
that actually used this, replace it with an actual IRQ define. For boards
that didn't, simply drop the resources.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Since the link sizes never change at runtime, push the calculation out to
the linker script to save some useless calculation costs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The access_ok() function did not accept ranges within the async banks
which made it impossible to do XIP in flash. Fixing that also showed
that the current bfin_mem_access_type() code did not work with accesses
that spanned async banks (like a file system). So split out and fix the
async bank checks so that all these scenarios work as expected.
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Rather than using our own data structures that basically boil down to a
bitmap, use the standard bitmap functions.
Reported-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Now that the driver has been updated, convert the board resources to the
new i2c framework for managing slaves.
For boards that don't actually hook up to this hardware, simply drop the
resources altogether.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The requested peripheral is turned into an index into some state arrays,
so make sure the calculated index doesn't exceed the index. This occurs
when using bogus pin values or the define headers are screwed up. Now
we'll notice right away that something needs fixing instead of trying to
track down random memory corruption.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
No point in redefining things that common code already does for us. Also
use CYC2NS_SCALE_FACTOR to better reflect reality and for better precision.
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Currently sched_clock() is only defined when using CYCLES as a clock
source. Declare sched_clock() in common code and mark it with notrace to
prevent invoking sched_clock() recursively (because ftrace uses
sched_clock() to record time).
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Some of the clocksource prototypes were updated, but the gptimer0 func was
missed in the process. Not a big issue as the argument is ignored, but we
should fix the compile warning anyways.
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The Blackfin port only implemented an optimized version of the
csum_tcpudp_nofold function, so convert everything else to the new
generic code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
udf: Avoid IO in udf_clear_inode
udf: Try harder when looking for VAT inode
udf: Fix compilation with UDFFS_DEBUG enabled
|
|
It is not very good to do IO in udf_clear_inode. First, VFS does not really
expect inode to become dirty there and thus we have to write it ourselves,
second, memory reclaim gets blocked waiting for IO when it does not really
expect it, third, the IO pattern (e.g. on umount) resulting from writes in
udf_clear_inode is bad and it slows down writing a lot.
The reason why UDF needed to do IO in udf_clear_inode is that UDF standard
mandates extent length to exactly match inode size. But when we allocate
extents to a file or directory, we don't really know what exactly the final
file size will be and thus temporarily set it to block boundary and later
truncate it to exact length in udf_clear_inode. Now, this is changed to
truncate to final file size in udf_release_file for regular files. For
directories and symlinks, we do the truncation at the moment when learn
what the final file size will be.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Some disks do not contain VAT inode in the last recorded block as required
by the standard but a few blocks earlier (or the number of recorded blocks
is wrong). So look for the VAT inode a bit before the end of the media.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: Clean up thermal init by introducing intel_thermal_supported()
x86, mce: Thermal monitoring depends on APIC being enabled
x86: Gart: fix breakage due to IOMMU initialization cleanup
x86: Move swiotlb initialization before dma32_free_bootmem
x86: Fix build warning in arch/x86/mm/mmio-mod.c
x86: Remove usedac in feature-removal-schedule.txt
x86: Fix duplicated UV BAU interrupt vector
nvram: Fix write beyond end condition; prove to gcc copy is safe
mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
x86: Limit the number of processor bootup messages
x86: Remove enabling x2apic message for every CPU
doc: Add documentation for bootloader_{type,version}
x86, msr: Add support for non-contiguous cpumasks
x86: Use find_e820() instead of hard coded trampoline address
x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks
Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: CodingStyle fixes
pcmcia: remove unused IRQ_FIRST_SHARED
|
|
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
spi: fix probe/remove section markings
Add OMAP spi100k driver
spi-imx: don't access struct device directly but use dev_get_platdata
spi-imx: Add mx25 support
spi-imx: use positive logic to distinguish cpu variants
spi-imx: correct check for platform_get_irq failing
ARM: NUC900: Add spi driver support for nuc900
spi: SuperH MSIOF SPI Master driver V2
spi: fix spidev compilation failure when VERBOSE is defined
spi/au1550_spi: fix setupxfer not to override cfg with zeros
spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
spi/i.MX: fix broken error handling for gpio_request
spi/i.mx: drain MXC SPI transfer buffer when probing device
MAINTAINERS: add SPI co-maintainer.
spi/xilinx_spi: fix incorrect casting
spi/mpc52xx-spi: minor cleanups
xilinx_spi: add a platform driver using the xilinx_spi common module.
xilinx_spi: add support for the DS570 IP.
xilinx_spi: Switch to iomem functions and support little endian.
xilinx_spi: Split into of driver and generic part.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf sched: Fix build failure on sparc
perf bench: Add "all" pseudo subsystem and "all" pseudo suite
perf tools: Introduce perf_session class
perf symbols: Ditch dso->find_symbol
perf symbols: Allow lookups by symbol name too
perf symbols: Add missing "Variables" entry to map_type__name
perf symbols: Add support for 'variable' symtabs
perf symbols: Introduce ELF counterparts to symbol_type__is_a
perf symbols: Introduce symbol_type__is_a
perf symbols: Rename kthreads to kmaps, using another abstraction for it
perf tools: Allow building for ARM
hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
perf tools: Allow cross compiling
tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING
Trivial conflict due to different fixes to modify_user_hw_breakpoint()
in include/linux/hw_breakpoint.h
|
|
Global variable declarations must match the definitions in section attributes
as the compiler is at liberty to vary the method it uses to access a variable,
depending on the section it is in.
When building the FRV arch, I now see:
drivers/built-in.o: In function `pci_apply_final_quirks':
drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
because the declaration of pci_dfl_cache_line_size in linux/pci.h does not
match the definition in drivers/pci/pci.c.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If there is no hardware breakpoint support, modify_user_hw_breakpoint()
tries to return a NULL pointer through as an 'int' return value:
In file included from kernel/exit.c:53:
include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint':
include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast
Return 0 instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits)
microblaze: Remove rt_sigsuspend wrapper
microblaze: nommu: Don't clobber R11 on syscalls
microblaze: Remove show_tmem function
microblaze: Support for WB cache
microblaze: Add PVR for Microblaze v7.30.a
microblaze: Remove ancient and fake microblaze version from cpu_ver table
microblaze: Remove panic_timeout init value
microblaze: Do not count system calls in default
microblaze: Enable DTC compilation
microblaze: Core oprofile configs and hooks
microblaze: Fix level interrupt ACKing
microblaze: Enable futimesat syscall
microblaze: Checking DTS against PVR for write-back cache
microblaze: Remove duplicity from pgalloc.h
microblaze: Futex support
microblaze: Adding dev_arch_data functions
microblaze: Fix the heartbeat gpio to be more robust
microblaze: Simple __copy_tofrom_user for noMMU
microblaze: Export memory_start for modules
microblaze: Use lowest-common-denominator default CPU settings
...
|
|
* 'for-linus' of git://neil.brown.name/md: (27 commits)
md: add 'recovery_start' per-device sysfs attribute
md: rcu_read_lock() walk of mddev->disks in md_do_sync()
md: integrate spares into array at earliest opportunity.
md: move compat_ioctl handling into md.c
md: revise Kconfig help for MD_MULTIPATH
md: add MODULE_DESCRIPTION for all md related modules.
raid: improve MD/raid10 handling of correctable read errors.
md/raid10: print more useful messages on device failure.
md/bitmap: update dirty flag when bitmap bits are explicitly set.
md: Support write-intent bitmaps with externally managed metadata.
md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb
md: support updating bitmap parameters via sysfs.
md: factor out parsing of fixed-point numbers
md: support bitmap offset appropriate for external-metadata arrays.
md: remove needless setting of thread->timeout in raid10_quiesce
md: change daemon_sleep to be in 'jiffies' rather than 'seconds'.
md: move offset, daemon_sleep and chunksize out of bitmap structure
md: collect bitmap-specific fields into one structure.
md/raid1: add takeover support for raid5->raid1
md: add honouring of suspend_{lo,hi} to raid1.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits)
mfd: Add twl6030 regulator subdevices
regulator: Add support for twl6030 regulators
rtc: Add twl6030 RTC support
mfd: Add support for twl6030 irq framework
mfd: Rename twl4030_ routines in twl-regulator.c
mfd: Rename twl4030_ routines in rtc-twl.c
mfd: Rename all twl4030_i2c*
mfd: Rename twl4030* driver files to enable re-use
mfd: Clarify twl4030 return value for read and write
mfd: Add all twl4030 regulators to the twl4030 mfd driver
mfd: Don't set mc13783 ADREFMODE for touch conversions
mfd: Remove ezx-pcap defines for custom led gpio encoding
mfd: Near complete mc13783 rewrite
mfd: Remove build time warning for WM835x register default tables
mfd: Force I2C to be built in when building WM831x
mfd: Don't allow wm831x to be built as a module
mfd: Fix incorrect error check for wm8350-core
mfd: Fix twl4030 warning
gpiolib: Implement gpio_to_irq() for wm831x
mfd: Remove default selection of AB4500
...
|
|
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: fix lh7a40x build
ARM: fix sa1100 build
ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq
[ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
[ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
[ARM] pxa/zeus: basic support for Arcom Zeus SBC
[ARM] pxa/em-x270: fix usb hub power up/reset sequence
PCMCIA: fix pxa2xx_lubbock modular build error
ARM: RealView: Fix typo in the RealView/PBX Kconfig entry
ARM: Do not allow the probing of the local timer
ARM: Add an earlyprintk debug console
|
|
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits)
NFS: Fix nfs_migrate_page()
rpc: remove unneeded function parameter in gss_add_msg()
nfs41: Invoke RECLAIM_COMPLETE on all new client ids
SUNRPC: IS_ERR/PTR_ERR confusion
NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare
nfs41: Handle NFSv4.1 session errors in the delegation recall code
nfs41: Retry delegation return if it failed with session error
nfs41: Handle session errors during delegation return
nfs41: Mark stateids in need of reclaim if state manager gets stale clientid
NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured
nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID
nfs41: nfs41_setup_state_renewal
NFSv41: More cleanups
NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code
NFSv41: Clean up slot table management
NFSv41: Fix nfs4_proc_create_session
nfs41: Invoke RECLAIM_COMPLETE
nfs41: RECLAIM_COMPLETE functionality
nfs41: RECLAIM_COMPLETE XDR functionality
Cleanup some NFSv4 XDR decode comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
m68k: rename global variable vmalloc_end to m68k_vmalloc_end
percpu: add missing per_cpu_ptr_to_phys() definition for UP
percpu: Fix kdump failure if booted with percpu_alloc=page
percpu: make misc percpu symbols unique
percpu: make percpu symbols in ia64 unique
percpu: make percpu symbols in powerpc unique
percpu: make percpu symbols in x86 unique
percpu: make percpu symbols in xen unique
percpu: make percpu symbols in cpufreq unique
percpu: make percpu symbols in oprofile unique
percpu: make percpu symbols in tracer unique
percpu: make percpu symbols under kernel/ and mm/ unique
percpu: remove some sparse warnings
percpu: make alloc_percpu() handle array types
vmalloc: fix use of non-existent percpu variable in put_cpu_var()
this_cpu: Use this_cpu_xx in trace_functions_graph.c
this_cpu: Use this_cpu_xx for ftrace
this_cpu: Use this_cpu_xx in nmi handling
this_cpu: Use this_cpu operations in RCU
this_cpu: Use this_cpu ops for VM statistics
...
Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c
|
|
In recent months, two different network projects erroneously
strayed down the rw_lock path. Update the Documentation
based upon comments by Eric Dumazet and Paul E. McKenney in
those threads.
Further updates await somebody else with more expertise.
Changes:
- Merged with extensive content by Stephen Hemminger.
- Fix one of the comments by Linus Torvalds.
Signed-off-by: William.Allen.Simpson@gmail.com
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It looks better to have a common function. No change in functionality.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4B25FDDC.407@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
|
|
Add check if APIC is not disabled since thermal
monitoring depends on it. As only apic gets disabled
we should not try to install "thermal monitor" vector,
print out that thermal monitoring is enabled and etc...
Note that "Intel Correct Machine Check Interrupts" already
has such a check.
Also I decided to not add cpu_has_apic check into
mcheck_intel_therm_init since even if it'll call apic_read on
disabled apic -- it's safe here and allow us to save a few code
bytes.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Here, tvec->tv_usec is "unsigned int" not "unsigned long".
Since the type is different on every platform, it's probably
best to just use long printf formats and cast.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091213.235622.53363059.davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This fixes the following breakage of the commit
75f1cdf1dda92cae037ec848ae63690d91913eac:
- GART systems that don't AGP with broken BIOS and more than 4GB
memory are forced to use swiotlb. They can allocate aperture by
hand and use GART.
- GART systems without GAP must disable GART on shutdown.
- swiotlb usage is forced by the boot option,
gart_iommu_hole_init() is not called, so we disable GART
early_gart_iommu_check().
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <1260759135-6450-3-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The commit 75f1cdf1dda92cae037ec848ae63690d91913eac introduced a
bug that we initialize SWIOTLB right after dma32_free_bootmem so
we wrongly steal memory area allocated for GART with broken BIOS
earlier.
This moves swiotlb initialization before dma32_free_bootmem().
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: yinghai@kernel.org
LKML-Reference: <1260759135-6450-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Stephen Rothwell reported these warnings:
arch/x86/mm/mmio-mod.c: In function 'print_pte':
arch/x86/mm/mmio-mod.c:100: warning: too many arguments for format
arch/x86/mm/mmio-mod.c:106: warning: too many arguments for format
The 'fmt' was left out accidentally.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus <torvalds@linux-foundation.org>
LKML-Reference: <1260775443.18538.16.camel@Joe-Laptop.home>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The reason of removal, "replaced by allowdac and no dac
combination" is incorrect. There is no way to do the same thing
with "allowdac" and "nodac" combination.
The usedac option enables us to stop via_no_dac() setting
forbid_dac to 1. That is, someone who uses VIA bridges can use
DAC with this option even if some of VIA bridges seem to be
broken about DAC.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: gcosta@redhat.com
LKML-Reference: <20091214104423X.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch adds a new "all" pseudo subsystem and an "all" pseudo
suite. These are for testing all subsystem and its all suite, or
all suite of one subsystem.
(This patch also contains a few trivial comment fixes for
bench/* and output style fixes. I judged that there are no
necessity to make them into individual patch.)
Example of use:
| % ./perf bench sched all # Test all suites of sched subsystem
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 0.414 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
| Total time: 10.999 [sec]
|
| 10.999317 usecs/op
| 90914 ops/sec
|
| % ./perf bench all # Test all suites of all subsystems
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 0.420 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
| Total time: 11.741 [sec]
|
| 11.741346 usecs/op
| 85169 ops/sec
|
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ...
|
| 808.407437 MB/Sec
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Generic rt_sigsuspend syscalls doesn't need any asm wrapper.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
The noMMU syscall trap has a bug that causes R11 to be zero on return to
userland. Remove the extra "save" of R11 responsible for the bug.
Remove reloading of mode indicator because r11 already contains it.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
show_tmem function do nothing that's why I removed it.
There is also cleaning of commented ancient code.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Microblaze v7.30.a will have 0x10 version string.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
