aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-16x86: apic - fix unused vars warning in calibrate_APIC_clockCyrill Gorcunov
If we don't have CONFIG_X86_PM_TIMER=y compiler warns about unused variables. Move PM timer based calibration into a separate function and make the code cleaner and the compiler happy as well. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - skip writting ESR register if we dont have onCyrill Gorcunov
On 82489DX we don't have ESR register so we should not write it. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - lapic_setup_esr does not handle esr_disable - fix itCyrill Gorcunov
lapic_setup_esr doesn't handle esr_disable inquire. The error brought in during unification process. Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dyn_array: use %pF instead of print_fn_descriptor_symbolYinghai Lu
... and tidy up the printouts. Suggested by Andrew Morton. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: print out apic id in hex formatYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: io-apic - get rid of __DO_ACTION macroCyrill Gorcunov
Replace __DO_ACTION macro with io_apic_modify_irq function. This allow us to 'grep' definitions being hided by __DO_ACTION macro: __unmask_IO_APIC_irq __mask_IO_APIC_irq __mask_and_edge_IO_APIC_irq __unmask_and_level_IO_APIC_irq Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: fix HPET compiler error when not using CONFIG_PCI_MSISteven Noonan
Added dummy function for hpet_setup_msi_irq(). Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: using HPET in MSI mode and setting up per CPU HPET timers, fixVenki Pallipadi
On Sat, Sep 06, 2008 at 06:03:53AM -0700, Ingo Molnar wrote: > > it crashes two testsystems, the fault on a NULL pointer in hpet init, > with: > > initcall print_all_ICs+0x0/0x520 returned 0 after 26 msecs > calling hpet_late_init+0x0/0x1c0 > BUG: unable to handle kernel NULL pointer dereference at 000000000000008c > IP: [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0 > PGD 0 > Oops: 0000 [1] SMP > CPU 0 > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #29725 > RIP: 0010:[<ffffffff80d228be>] [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0 > RSP: 0018:ffff88003fa07dd0 EFLAGS: 00010246 > RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 > RDX: ffffc20000000160 RSI: 0000000000000000 RDI: 0000000000000003 > RBP: ffff88003fa07e90 R08: 0000000000000000 R09: ffff88003fa07dd0 > R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003fa07dd0 > R13: 0000000000000002 R14: ffffc20000000000 R15: 000000006f57e511 > FS: 0000000000000000(0000) GS:ffffffff80cf6a80(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 000000000000008c CR3: 0000000000201000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 1, threadinfo ffff88003fa06000, task ffff88003fa08000) > Stack: 00000000fed00000 ffffc20000000000 0000000100000003 0000000800000002 > 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > Call Trace: > [<ffffffff80d227c0>] ? hpet_late_init+0x0/0x1c0 > [<ffffffff80209045>] do_one_initcall+0x45/0x190 > [<ffffffff80296f39>] ? register_irq_proc+0x19/0xe0 > [<ffffffff80d0d140>] ? early_idt_handler+0x0/0x73 > [<ffffffff80d0dabc>] kernel_init+0x14c/0x1b0 > [<ffffffff80942ac1>] ? trace_hardirqs_on_thunk+0x3a/0x3f > [<ffffffff8020dbd9>] child_rip+0xa/0x11 > [<ffffffff8020ceee>] ? restore_args+0x0/0x30 > [<ffffffff80d0d970>] ? kernel_init+0x0/0x1b0 > [<ffffffff8020dbcf>] ? child_rip+0x0/0x11 > Code: 20 48 83 c1 01 48 39 f1 75 e3 44 89 e8 4c 8b 05 29 29 22 00 31 f6 48 8d 78 01 66 66 90 89 f0 48 8d 04 80 48 c1 e0 05 4a 8d 0c 00 <f6> 81 8c 00 00 00 08 74 26 8b 81 80 00 00 00 8b 91 88 00 00 00 > RIP [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0 > RSP <ffff88003fa07dd0> > CR2: 000000000000008c > Kernel panic - not syncing: Fatal exception There was one code path, with CONFIG_PCI_MSI disabled, where we were accessing hpet_devs without initialization. That resulted in the above crash. The change below adds a check for hpet_devs. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: io-apic - do not use KERN_DEBUG marker too muchCyrill Gorcunov
Do not use KERN_DEBUG several times on the same line being printed. Introduced by mine previous patch, sorry. Reported-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: lapic address print out like io apic addrYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dyn_array: remove one panicYinghai Lu
Andrew said, we don't need duplicated panic. because __alloc_bootmem already have that. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: io-apic - code style cleaning for setup_IO_APIC_irqsCyrill Gorcunov
By changing printout form we are able to shrink (and clean up) code a bit. Former printout example: init IO_APIC IRQs IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected. IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected. New printout example: init IO_APIC IRQs 1-1 1-2 1-3 (apicid-pin) not connected 2-1 2-2 2-3 (apicid-pin) not connected Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: HPET_MSI Initialise per-cpu HPET timersvenkatesh.pallipadi@intel.com
Initialize a per CPU HPET MSI timer when possible. We retain the HPET timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being used. We setup the remaining HPET timers as per CPU MSI based timers. This per CPU timer will eliminate the need for timer broadcasting with IRQ 0 when there is non-functional LAPIC timer across CPU deep C-states. If there are more CPUs than number of available timers, CPUs that do not find any timer to use will continue using LAPIC and IRQ 0 broadcast. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: HPET_MSI Basic HPET_MSI setup code, cleanupsIngo Molnar
small style cleanups. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: HPET_MSI Basic HPET_MSI setup codevenkatesh.pallipadi@intel.com
Basic HPET MSI setup code. Routines to perform basic MSI read write in HPET memory map and setting up irq_chip for HPET MSI. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: HPET_MSI Refactor code in preparation for HPET_MSIvenkatesh.pallipadi@intel.com
Preparatory patch before the actual HPET MSI changes. Sets up hpet_set_mode and hpet_next_event for the MSI related changes. Just the code refactoring and should be zero functional change. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: HPET_MSI change IRQ affinity in process context when it is disabledvenkatesh.pallipadi@intel.com
Change the IRQ affinity in the process context when the IRQ is disabled. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: error missed ifndef CONFIG_HAVE_SPARSE_IRQ, v2Yinghai Lu
need to change irq to int too Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: set_irq_chip() has redundant call to irq_to_desc()Dean Nelson
Extraneous call to irq_to_desc(). Signed-off-by: Dean Nelson <dcn@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: error missed ifndef CONFIG_HAVE_SPARSE_IRQDean Nelson
An error return from create_irq_nr() is 0, but an error return from create_irq() is -1. Signed-off-by: Dean Nelson <dcn@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: io-apic - declare irq_cfg_lock for SPARSE_IRQ onlyCyrill Gorcunov
We use irq_cfg_lock lock in SPARSE_IRQ only context so move it under #ifdef and compiler will be happy. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: io-apic - use ARRAY_SIZE macroCyrill Gorcunov
Make the code width a bit shorter with ARRAY_SIZE macro. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dyn_array: fix typoYinghai Lu
Andrew found the typo could break some platforms. also fix a checkpatch warning. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: print out if acpi want physical flat of allYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dyn_array: don't break compiling for !CONFIG_SMPH. Peter Anvin
Impact: build failure on uniprocessor When compiling for !CONFIG_SMP, per_cpu_alloc_dyn_array() would fail to compile, since it uses per_cpu_offset, which is not defined for uniprocessor builds. Hence, do not compile per_cpu_alloc_dyn_array() for !CONFIG_SMP. Attempting to call this function in a uniprocessor configuration would be simply wrong in the first place. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-16dmar: fix dmar_parse_dev() devices_cnt error condition checkSuresh Siddha
It is possible that, instead of PCI endpoint/sub-hierarchy structures, only IO-APIC/HPET devices may be reported under device scope structures. Fix the devices_cnt error check, which cares about only PCI structures and removes the dma-remapping unit structure (dmaru) when the devices_cnt is zero and include_all flag is not set. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dmar: use list_for_each_entry_safe() in dmar_dev_scope_init()Suresh Siddha
In dmar_dev_scope_init(), functions called under for_each_drhd_unit()/ for_each_rmrr_units() can delete the list entry under some error conditions. So we should use list_for_each_entry_safe() for safe traversal. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dmar: initialize the return value in dmar_parse_dev()Yinghai Lu
initialize the return value in dmar_parse_dev() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16dmar: fix using early fixmap mapping for DMAR table parsingYinghai Lu
Very early detection of the DMAR tables will setup fixmap mapping. For parsing these tables later (while enabling dma and/or interrupt remapping), early fixmap mapping shouldn't be used. Fix it by calling table detection routines again, which will call generic apci_get_table() for setting up the correct mapping. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x2apic: fix reserved APIC register accesses in print_local_APIC()Yinghai Lu
APIC_ARBPRI is a reserved register for XAPIC and beyond. APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors. APIC_EOI is a write only register. APIC_DFR is reserved in x2apic mode. Access to these registers in x2apic will result in #GP fault. Fix these apic register accesses. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16sparseirq: export nr_irqs on m68k/sparc/s390Ingo Molnar
Stephen Rothwell reported such build failures on m68k/sparc/s390: > ERROR: "nr_irqs" [drivers/net/hamradio/baycom_ser_fdx.ko] undefined! > ERROR: "nr_irqs" [drivers/net/3c59x.ko] undefined! export nr_irqs on these architectures too. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - unify smp_spurious/error_interrupt declarationCyrill Gorcunov
According to entry_64.S we do pass pt_regs pointer into interrupt handlers but don't use them. So we safely may merge the declarations. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16sparseirq: move kstat_irqs from kstat to irq_desc - fixYinghai Lu
fix non-sparseirq architectures. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: let 64 bit to use 32 bit calibrate_apic_clockYinghai Lu
Use the 32-bit APIC calibration code - it's more mature. Signed-of-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: rename apic_32.c and apic_64.c to apic.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic copy apic_64.c to apic_32.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic copy calibrate_APIC_clock to each other in apic_32/64.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic unify smp_spurious/error_interruptYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: merge header files in apic_xx.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: copy detect_init_APIC to the otherYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@mgail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: merge APIC_init_uniprocessorYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make apic_32/64.c more likeYinghai Lu
except x2apic, detec_init_APIC, and calibrating_APIC_clock Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: add hard_smp_prossor_id with MACRO in io_apic_xx.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use HAVE_X2APIC in apic_64.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic_xx.c order variablesYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - unify smp_apic_timer_interruptCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic_32.c should use __cpuinit sectionCyrill Gorcunov
All callers are __init or __cpuinit so there is no need to hold this code without CPU_HOTPLUG being set. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - unify setup_local_APICCyrill Gorcunov
- remove useless read of APIC_LVR - wrap with preempt_disable/enable - check for integrated APIC just in place v2: fix by Yinghai Lu. fix lapic_is_integrated using let 64-bit too have pic_mode Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic_64.c - add sanity check for spurious vector definitionCyrill Gorcunov
Do not check for SPUTIOUS_APIC_VECTOR definition twice. Check it once - is what we need. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - unify setup_apicpmtimerCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:24:12 +0000