aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-12sfc: 10Xpress: Initialise pause advertising flagsBen Hutchings
The mdio module now handles reconfiguration of pause advertising through ethtool, but not initialisation. Add the necessary initialisation to tenxpress_phy_init(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12mdio: Expose pause frame advertising flags to ethtoolBen Hutchings
In mdio45_ethtool_gset_npage() and mdio45_ethtool_gset(), check MDIO pause frame advertising flags and set the corresponding ethtool flags. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12mdio: Advertise pause (flow control) settings even if autoneg is offBen Hutchings
Currently, if pause autoneg is off we do not set either pause advertising flag. If autonegotiation of speed and duplex settings is enabled, there is no way for the link partner to distinguish this from our refusing to use pause frames. We should instead set the advertising flags according to the forced mode so that the link partner can follow our lead. This is consistent with the behaviour of other drivers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Add support for hibernationAnton Vorontsov
Thanks to various cleanups and refactorings this is now straightforward: convert the gianfar driver to dev_pm_ops, plus add ->restore() callback that will fully reinitialize MAC internal registers and BDs. Note that I kept legacy suspend/resume callbacks so that this patch doesn't depend on PowerPC changes (i.e. dev_pm_ops support for OF platform drivers). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Factor out gfar_init_bds() from gfar_alloc_skb_resources()Anton Vorontsov
After hibernation we want to just reinitialize BDs, no need to allocate anything. So, factor out BDs initialization code from gfar_alloc_skb_resourses(). Also, teach gfar_init_bds() to reuse already allocated RX SKBs, i.e. just call gfar_init_rxbdp() if a SKB was already allocated and mapped. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Factor out RX BDs initialization from gfar_new_rxbdp()Anton Vorontsov
We want to just reinitialize RX BDs after hibernation, no need to map the skb->data again. So let's factor gfar_init_rxbdp() out of gfar_new_rxbdp(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Move tbase/rbase initialization to gfar_init_mac()Anton Vorontsov
For hibernation we want to call gfar_init_mac() without need to free/allocate_skb_resources sequence, so save the DMA address into a private struct, and move tbase/rbase initialization to gfar_init_mac(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Split allocation and initialization steps out of startup_gfar()Anton Vorontsov
Two new functions implemented: gfar_alloc_skb_resources() and gfar_init_mac(). We'll use gfar_init_mac() for restoring after hibernation. The patch just moves the code around, there should be no functional changes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Don't needlessly set the wrap bit for the last RX BDAnton Vorontsov
startup_gfar() sets the wrap bit for the last rxbd just after gfar_new_rxbdp() call, which is issued for all rxbds. And gfar_new_rxbdp() has the following check already: if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1) lstatus |= BD_LFLAG(RXBD_WRAP); So we don't need to set the bit again. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Simplify skb resources freeing codeAnton Vorontsov
Remove dma_free_coherent() from stop_gfar() and gfar_start() calls, place it into free_skb_resources(). That makes SKB resources management more understandable, plus free_skb_resources() will be used as a cleanup routine for gfar_alloc_skb_resources() that will be implemented soon. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12gianfar: Some cleanups for startup_gfar()Anton Vorontsov
We're going to split the startup_gfar() into 3 separate functions, so let's cleanup the code a little bit so that cosmetic changes won't distract attention from logical ones. - Remove needless casts (e.g. (struct sk_buff **)kmalloc()); - Turn 'unsigned long vaddr;' into 'void *vaddr', to avoid casting; - Add new 'struct device *dev' variable as a shorthand for '&priv->ofdev->dev' that is used all over the place, also rename 'struct net_device *dev' to 'struct net_device *ndev'; - Turn printk(KERN_ERR ...) to pr_err(...), which is shorter; - Don't return bogus -1 (i.e. -EPERM) when request_irq() fails; - Turn '&priv->regs->' to just '&regs->'. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12net: Introduce recvmmsg socket syscallArnaldo Carvalho de Melo
Meaning receive multiple messages, reducing the number of syscalls and net stack entry/exit operations. Next patches will introduce mechanisms where protocols that want to optimize this operation will provide an unlocked_recvmsg operation. This takes into account comments made by: . Paul Moore: sock_recvmsg is called only for the first datagram, sock_recvmsg_nosec is used for the rest. . Caitlin Bestler: recvmmsg now has a struct timespec timeout, that works in the same fashion as the ppoll one. If the underlying protocol returns a datagram with MSG_OOB set, this will make recvmmsg return right away with as many datagrams (+ the OOB one) it has received so far. . Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen datagrams and then recvmsg returns an error, recvmmsg will return the successfully received datagrams, store the error and return it in the next call. This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg, where we will be able to acquire the lock only at batch start and end, not at every underlying recvmsg call. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12cnic: Need to include net/ip6_checksum.hDavid S. Miller
drivers/net/cnic.c: In function 'cnic_init_storm_conn_bufs': drivers/net/cnic.c:1757: error: implicit declaration of function 'csum_ipv6_magic' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12pasemi_mac: ethtool set settings supportValentine Barshak
Add ethtool set settings to pasemi_mac_ethtool. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12be2net: Implement ethtool get_phys_id function.Sarveshwar Bandi
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12net: Generalize socket rx gap / receive queue overflow cmsgNeil Horman
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12Revert "af_packet: add interframe drop cmsg (v6)"David S. Miller
This reverts commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab. Neil is reimplementing this generically, outside of AF_PACKET. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11ipv6 sit: Set relay to 0.0.0.0 directly if relay_prefixlen == 0.YOSHIFUJI Hideaki / 吉藤英明
ipv6 sit: Set relay to 0.0.0.0 directly if relay_prefixlen == 0. Do not use bit-shift if relay_prefixlen == 0; relay_prefix << 32 does not result in 0. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11ipv6 sit: Fix 6rd relay address.YOSHIFUJI Hideaki / 吉藤英明
ipv6 sit: Fix 6rd relay address. Relay's address should be extracted from real IPv6 address instead of configured prefix. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11ipv6 sit: Ensure to initialize 6rd parameters.YOSHIFUJI Hideaki / 吉藤英明
ipv6 sit: Ensure to initialize 6rd parameters. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add main functions to support bnx2x devices.Michael Chan
Add iSCSI support for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add bnx2x data structures.Michael Chan
Add hardware and software structures for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Refactor some code.Michael Chan
Refactor ring init. code for subsequent 10G patches. Also add rtnl_lock() in cnic_uio_open() to prevent race condition with netdev events. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Add main CNIC interface functions.Michael Chan
Add the main CNIC registration, callback, MAC addr. setup functions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Add hw init code to support iSCSI.Michael Chan
Add code to initialize hardware blocks used for iSCSI. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Refactor MAC address setup code.Michael Chan
For iSCSI MAC address setup in later patches. Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Refactor bnx2x_sp_post().Michael Chan
Some of the SPQ (slow-path queue) operations will be used by the cnic code in later patches. Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Add CBFC pause frame counters to ethtool stats.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Don't fail open when port is not initialized.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Get rid of firmware handler debug code.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Remove inline math for small rx buf mapping.Ron Mercer
rx_ring->sbq_buf_len now holds the length of the mapped portion of the buffer rather than the overall length. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Store firmware revision as early as possible.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Add handler for DCBX firmware event.Ron Mercer
The driver has nothing to do, but this marker prevents the event from showing up 'not handled'. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Set PCIE max read request size.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Remove explicit setting of PCI Dev CTL reg.Ron Mercer
Remove explicit setting of error reporting bits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-10-09net: Link in PHY drivers before others.David S. Miller
We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09wireless: make wireless drivers select coreJohannes Berg
It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09libertas: depend on CONFIG_CFG80211Holger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09libertas: remove double assignment of dev->netdev_opsLuis R. Rodriguez
This came in through the patch titled: libertas: first stab at cfg80211 support I only noticed it because it breaks compat-wireless :) Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09ath9k: use right parameter for MODULE_PARM_DESC() for debugLuis R. Rodriguez
Reported-by: sujith.manoharan@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ixgbe: Fix KR to KX fail over for Mezzanine cardsDon Skidmore
This patch allows the recently added backplane device IDs that support KR to fail over to KX during link setup. This is accomplished by the new MAC link setup function ixgbe_setup_mac_link_smartspeed(). Comments were also updated to better document the reason for the delays chosen for KX, KX4, BX, BX4 and KR connections. Signed-off-by: Don Skidmore <don.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ixgbe: add support for 82599 based Express Module X520-P2Don Skidmore
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ibm_newemac: Added 16K Tx FIFO size support for EMAC4Dave Mitchell
Some of the EMAC V4 implementations support 16K Tx FIFOs. This patch adds support for this functionality and fixes typos in the Tx FIFO size error messages. Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Add disable/enable firmare irqs to handler.Ron Mercer
This was accidentally omitted from one of the previous patches for firmware event handling. The handler needs to the enable firmware irq mask when it's done processing or it may not get any more events interrupts. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Restore rx mode after internal reset.Ron Mercer
Call set_multi API after reset recovery. This was exposed by tripping tx_timeout. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix chip reset process.Ron Mercer
Add wait for NIC fifo and MGMNT fifo to empty before applying reset. Otherwise broken frames can be processed by management processor and cause it to hang. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix RX multicast filter settings.Ron Mercer
The addresses were being added to the filter properly, but were not being enabled. This adds enable bit to filter write. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix frame routing for multicast frames.Ron Mercer
Broadcast/multicast should always be routed to the default (zeroeth) rx ring. Broadcast frames are already routed correctly. This fixes routing for multicast frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 13:52:02 +0000