aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-06SUNRPC: Make the transport-specific setup routine allocate rpc_xprtChuck Lever
Change the location where the rpc_xprt structure is allocated so each transport implementation can allocate a private area from the same chunk of memory. Note also that xprt->ops->destroy, rather than xprt_destroy, is now responsible for freeing rpc_xprt when the transport is destroyed. Test plan: Connectathon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: minor optimization of "xid" field in rpc_xprtChuck Lever
Move the xid field in the rpc_xprt structure to be in the same cache line as the reserve_lock, since these are used at the same time. Test plan: None. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Clean up xs_send_pages()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Ensure xdr_buf_read_netobj() checks for memory overrunsTrond Myklebust
Also clean up the code... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Add __(read|write)_bytes_from_xdr_bufTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Clean up argument types in xdr.cTrond Myklebust
Converts various integer buffer offsets and sizes to unsigned integer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS: Remove use of the Big Kernel Lock around nfs calls to readlinkFrank Filz
Remove use of the Big Kernel Lock around indirect calls to nfs3_proc_readlink and nfs4_proc_readlink, both of which basically call rpc_call_sync. Signed-off-by: Frank Filz <ffilz@us.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS: Remove use of the Big Kernel Lock around calls to rpc_call_syncFrank Filz
Remove use of the Big Kernel Lock around calls to rpc_call_sync. Signed-off-by: Frank Filz <ffilz@us.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS: Remove use of the Big Kernel Lock around calls to rpc_execute.Frank Filz
Remove use of the Big Kernel Lock around calls to rpc_execute. Signed-off-by: Frank Filz <ffilz@us.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Remove BKL around the RPC socket operations etc.Trond Myklebust
All internal RPC client operations should no longer depend on the BKL, however lockd and NFS callbacks may still require it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Fix up missing BKL in asynchronous RPC callback functionsTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Give cloned RPC clients their own rpc_pipefs directoryTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Handle the cases where rpc_alloc_iostats() failsTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS: Fix nfs_sync_inode_wait(FLUSH_INVALIDATE)Trond Myklebust
Currently nfs_sync_inode_wait() will fail to loop correctly when we call nfs_sync_inode_wait with the FLUSH_INVALIDATE argument. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS: Fix missing page_unlock() in nfs_readpageTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS: Fix asynchronous read error handlingTrond Myklebust
We must always call ->read_done() before we truncate the page data, or decide to flag an error. The reasons are that in NFSv2, ->read_done() is where the eof flag gets set. in NFSv3/v4 ->read_done() handles EJUKEBOX-type errors, and v4 state recovery. However, we need to mark the pages as uptodate before we deal with short read errors, since we may need to modify the nfs_read_data arguments. We therefore split the current nfs_readpage_result() into two parts: nfs_readpage_result(), which calls ->read_done() etc, and nfs_readpage_retry(), which subsequently handles short reads. Note: Removing the code that retries in case of a short read also fixes a bug in nfs_direct_read_result(), which used to return a corrupted number of bytes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06NFS Exclusive open not supported bugAndy Ryan
When trying to open a file with the O_EXCL flag over NFS on a server that does not support exclusive mode, the file does not open. The reason, rpc_call_sync returns a errno number, and not the nfs error number. I fixed it by changing the status check in nfs3proc.c. Either this is how it should be fixed, or rpc_call_sync should be fixed to return the NFS error. Signed-off-by: Andy Ryan <genanr@allantgroup.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Fix a potential race in rpc_wake_up_task()Trond Myklebust
Use RCU to ensure that we can safely call rpc_finish_wakeup after we've called __rpc_do_wake_up_task. If not, there is a theoretical race, in which the rpc_task finishes executing, and gets freed first. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06Fix a second potential rpc_wakeup race...Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06Subject: Re: [PATCH] Fix SUNRPC wakeup/execute race conditionChristophe Saout
The sunrpc scheduler contains a race condition that can let an RPC task end up being neither running nor on any wait queue. The race takes place between rpc_make_runnable (called from rpc_wake_up_task) and __rpc_execute under the following condition: First __rpc_execute calls tk_action which puts the task on some wait queue. The task is dequeued by another process before __rpc_execute continues its execution. While executing rpc_make_runnable exactly after setting the task `running' bit and before clearing the `queued' bit __rpc_execute picks up execution, clears `running' and subsequently both functions fall through, both under the false assumption somebody else took the job. Swapping rpc_test_and_set_running with rpc_clear_queued in rpc_make_runnable fixes that hole. This introduces another possible race condition that can be handled by checking for `queued' after setting the `running' bit. Bug noticed on a 4-way x86_64 system under XEN with an NFSv4 server on the same physical machine, apparently one of the few ways to hit this race condition at all. Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Christophe Saout <christophe@saout.de> Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
2006-12-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits) [SCSI] aic79xx: Add ASC-29320LPE ids to driver [SCSI] stex: version update [SCSI] stex: change wait loop code [SCSI] stex: add new device type support [SCSI] stex: update device id info [SCSI] stex: adjust default queue length [SCSI] stex: add value check in hard reset routine [SCSI] stex: fix controller_info command handling [SCSI] stex: fix biosparam calculation [SCSI] megaraid: fix MMIO casts [SCSI] tgt: fix undefined flush_dcache_page() problem [SCSI] libsas: better error handling in sas_expander.c [SCSI] lpfc 8.1.11 : Change version number to 8.1.11 [SCSI] lpfc 8.1.11 : Misc Fixes [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging [SCSI] lpfc 8.1.11 : Fix Memory leaks [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support ...
2006-12-05Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: [PATCH] pcmcia: at91_cf update [PATCH] pcmcia: fix m32r_cfc.c compilation [PATCH] pcmcia: ds.c debug enhancements [PATCH] pcmcia: at91_cf update [PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation [PATCH] pcmcia: remove prod_id indirection [PATCH] pcmcia: remove manf_id and card_id indirection [PATCH] pcmcia: IDs for Elan serial PCMCIA devcies [PATCH] pcmcia: allow for four multifunction subdevices [PATCH] pcmcia: handle __copy_from_user() return value in ioctl [PATCH] pcmcia: multifunction card handling fixes [PATCH] pcmcia: allow shared IRQs on pd6729 sockets [PATCH] pcmcia: start over after CIS override [PATCH] cm4000_cs: fix return value check [PATCH] pcmcia: yet another IDE ID [PATCH] pcmcia: Add an id to ide-cs.c
2006-12-05[SCSI] aic79xx: Add ASC-29320LPE ids to driverSalyzyn, Mark
Simple patch to add the new PCIe version of the 29320 card. Signed-off: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: version updateEd Lin
Update version to 3.1.0.1 Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: change wait loop codeEd Lin
The original wait loop may be much longer than intended time. Use more accurate timer_after for it. Also adjust wait value to avoid unnecessary long waiting. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: add new device type supportEd Lin
Add support for st_vsc1 type device (st_vsc is ok because it does not require extra buffer). Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: update device id infoEd Lin
- add comments for various devices - remove unused device ids(0xf350, 0x4301, 0x8301, 0x8302) - add new device id(0xe350) - fix vendor id of st_vsc - modify Kconfig help info Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: adjust default queue lengthEd Lin
Firmware of new version may adjust default queue length. It is backward compatible. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: add value check in hard reset routineEd Lin
During hard reset, an all-1 value from PCI_COMMAND should be invalid. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: fix controller_info command handlingEd Lin
This command needs information from both firmware and driver. First copy information from firmware to buffer, then fill in driver information. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] stex: fix biosparam calculationEd Lin
Fix biosparam calculation. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] megaraid: fix MMIO castsJeff Garzik
megaraid's MMIO RD*/WR* macros directly call readl() and writel() with an 'unsigned long' argument. This throws a warning, but is otherwise OK because the 'unsigned long' is really the result of ioremap(). This setup is also OK because the variable can hold an ioremap cookie /or/ a PCI I/O port (PIO). However, to fix the warning thrown when readl() and writel() are passed an unsigned long cookie, I introduce 'void __iomem *mmio_base', holding the same value as 'base'. This will silence the warnings, and also cause an oops whenever these MMIO-only functions are ever accidentally passed an I/O address. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05[SCSI] tgt: fix undefined flush_dcache_page() problemakpm@osdl.org
drivers/scsi/scsi_tgt_if.c: In function 'tgt_uspace_send_event': drivers/scsi/scsi_tgt_if.c:88: warning: implicit declaration of function 'flush_dcache_page' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-04[PATCH] Centralise definitions of sector_t and blkcnt_tMatthew Wilcox
CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] blktrace: don't return blktrace_seq from trace_note() [PATCH] blktrace: uninline trace_note()
2006-12-04Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits) ocfs2: implement i_op->permission configfs: make configfs_dirent_exists() static ocfs2: update file system paths to set atime ocfs2: core atime update functions ocfs2: Add splice support ocfs2: Remove ocfs2_write_should_remove_suid() [PATCH] Export should_remove_suid() configfs: mutex_lock_nested() fix ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t ocfs2: remove handle argument to ocfs2_start_trans() ocfs2: remove ocfs2_journal_handle journal field ocfs2: pass ocfs2_super * into ocfs2_commit_trans() ocfs2: remove unused handle argument from ocfs2_meta_lock_full() ocfs2: make ocfs2_alloc_handle() static ocfs2: remove unused ocfs2_handle_add_lock() ocfs2: remove unused ocfs2_handle_add_inode() ocfs2: Don't allocate handle early in ocfs2_rename() ocfs2: don't use handle for locking in allocation functions ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_rename() ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_symlink() ...
2006-12-04[PATCH] remote memory corruptor in ibmtr.cAl Viro
ip_summed changes last summer had missed that one. As the result, we have ip_summed interpreted as CHECKSUM_PARTIAL now. IOW, ->csum is interpreted as offset of checksum in the packet. net/core/* will both read and modify the value as that offset, with obvious reasons. At the very least it's a remote memory corruptor. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[PATCH] selinux endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Cleanup memory barriers for weakly ordered systems. [MIPS] Alchemy: Automatically enable CONFIG_RESOURCES_64BIT for PCI configs. [MIPS] Unify csum_partial.S [MIPS] SWARM: Fix a typo in #error directives [MIPS] Fix atomic.h build errors. [MIPS] Use SYSVIPC_COMPAT to fix various problems on N32 [MIPS] klconfig add missing bracket
2006-12-04Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits) [POWERPC] Add missing EXPORTS for mpc52xx support [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment [POWERPC] ps3: add a default zImage target [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver [POWERPC] Fix debug printks for 32-bit resources in the PCI code [POWERPC] Replace kmalloc+memset with kzalloc [POWERPC] Linkstation / kurobox support [POWERPC] Add the e300c3 core to the CPU table. [POWERPC] ppc: m48t35 add missing bracket [POWERPC] iSeries: don't build head_64.o unnecessarily [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily [POWERPC] Fix cputable.h for combined build [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries [POWERPC] Allow xmon to build on legacy iSeries [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3 [POWERPC] Tell firmware we can handle POWER6 compatible mode [POWERPC] Clean images in arch/powerpc/boot [POWERPC] Fix OF pci flags parsing [POWERPC] defconfig for lite5200 board ...
2006-12-04[PATCH] pcmcia: at91_cf updateAndrew Victor
This is an update to the AT91 CompactFlash driver. We replace the hard-coded "chip select 4" with the chip-select value passed via platform_data. The configuration of the EBI memory controller to enable Compact Flash access is now also handled in the platform setup code and not in the driver. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: fix m32r_cfc.c compilationAdrian Bunk
More fallout of the post 2.6.19-rc1 IRQ changes... Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: ds.c debug enhancementsDominik Brodowski
Add verbose error messages and debug information to ds.c Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: at91_cf updateAndrew Victor
This is an update to the AT91RM9200 CompactFlash driver. The changes include: - Use the I/O memory address passed via the platform_device resources instead of constant global values. - The IRQ should not be used as a random'ness source. - Return errors if ioremap() or request_mem_region() fails. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidationDominik Brodowski
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: remove prod_id indirectionDominik Brodowski
As we read out the product information strings (VERS_1) from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields prod_id[], remove additional product information string detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: remove manf_id and card_id indirectionDominik Brodowski
As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: IDs for Elan serial PCMCIA devciesTony Olech
Add IDs for Elan serial PCMCIA devices. In addition, move the pdaudio_cf driver from matching based on manf_id and card_id to the more specific prod_id1 and prod_id2 to avoid false positives. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: allow for four multifunction subdevicesDominik Brodowski
Some Elan serial cards allow for four (independent) multifunction subdevices. Teach the PCMCIA core to deal with such devices. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: handle __copy_from_user() return value in ioctlDominik Brodowski
Handle __copy_from_user() return value. drivers/pcmcia/pcmcia_ioctl.c:597: warning: ignoring return value of '__copy_from_user', declared with attribute warn_unused_result Noticed and first fix by Randy Dunlap. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 19:36:33 +0000