aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-07[PATCH] x86-64: adjust pmd_bad()Jan Beulich
Make pmd_bad() symmetrical to pgd_bad() and pud_bad(). At once, simplify them all. TBD: tighten down the checks again as suggested by Hugh D. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: conditionalize inclusion of some MTRR flavorsJan Beulich
Avoid inclusion of code that's dead for x86-64. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: remove prototype of free_bootmem_generic()Jan Beulich
The function doesn't exist (anymore). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Don't touch per cpu memory of offline CPUs in touch_nmi_watchdogJan Beulich
Just like on x86-64, don't touch foreign CPUs' memory if the watchdog isn't enabled at all. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: clear_fixmap() should not use set_pte()Jan Beulich
While not strictly required with the current code (as the upper half of page table entries generated by __set_fixmap() cannot be non-zero due to the second parameter of this function being 'unsigned long'), the use of set_pte() in __set_fixmap() in the context of clear_fixmap() is still improper with CONFIG_X86_PAE (see the respective comment in include/asm-i386/pgtable-3level.h) and would turn into a bug if that second parameter ever gets changed to a 64-bit type. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Rate limit no irq handler messagesAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: fix perms/range of vsyscall vma in /proc/*/mapsErnie Petrides
The final line of /proc/<pid>/maps on x86_64 for native 64-bit tasks shows an incorrect ending address and incorrect permissions. There is only a single page mapped in this vsyscall region, and it is accessible for both read and execute. The patch below fixes this. (Since 32-bit-compat tasks have a real vma with correct perms/range, no change is necessary for that scenario.) Before the patch, a "cat /proc/self/maps | tail -1" shows this: ffffffffff600000-ffffffffffe00000 ---p 00000000 [...] After the patch, this is the output: ffffffffff600000-ffffffffff601000 r-xp 00000000 [...] Signed-off-by: Ernie Petrides <petrides@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Add support for compilation for Core2Andi Kleen
gcc doesn't support -mtune=core2 yet, but will be soon. Use -mtune=generic or -mtune=i686 as fallback TBD need benchmarking for INTEL_USERCOPY etc. So far I used the same defaults as MPENTIUMM Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Add option to compile for Core2Andi Kleen
Add an option to compile for Intel's Core 2 The Kconfig help is a mouthful due to the inventiveness of Intel's product naming department. Mainly for the 64bit cache line sizes because gcc doesn't support optimizing for core2 yet. However it will and then the kernel should be ready by passing the right option Also fix the old MPSC help text to confirm better to reality. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] paravirt: Add option to allow skipping the timer checkZachary Amsden
Add a way to disable the timer IRQ routing check via a boot option. The VMI timer code uses this to avoid triggering the pester Mingo code, which probes for some very unusual and broken motherboard routings. It fires 100% of the time when using a paravirtual delay mechanism instead of using a realtime delay, since there is no elapsed real time, and the 4 timer IRQs have not yet been delivered. In addition, it is entirely possible, though improbable, that this bug could surface on real hardware which picks a particularly bad time to enter SMM mode, causing a long latency during one of the timer IRQs. While here, make check_timer be __init. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> [chrisw: use no_timer_check to bring inline with x86_64 as per Andi's request] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: fix missing pte updateZachary Amsden
The function ptep_get_and_clear uses an atomic instruction sequence to get and clear an active pte. Rather than add such an atomic operator to all virtual machine implementations in paravirt-ops, it is easier to support the raw atomic sequence and use either a trapping writable pagetable approach, or a post-update notification. For the post update notification, we require the pte_update function to be called after the access. Combine the 2-level and 3-level paging operators into one common function which does the post-update notification, and rename the actual atomic sequences to raw_ptep_xxx operators. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: fix parameter names in mmu operationsZachary Amsden
Make parameter names match function argument names for the yet to be defined pte_update_defer accessor. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Preparatory mmu header movementZachary Amsden
Move header includes for the nopud / nopmd types to the location of the actual pte / pgd type definitions. This allows generic 4-level page type code to be written before the split 2/3 level page table headers are included. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Be careful about touching BIOS address spaceRusty Russell
BIOS ROM areas may not be mapped into the guest address space, so be careful when touching those addresses to make sure they appear to be mapped. [akpm@osdl.org: fix unused var warning] AK: Changed __get_user to probe_kernel_address Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Add MMU virtualization to paravirt_opsRusty Russell
Add the three bare TLB accessor functions to paravirt-ops. Most amusingly, flush_tlb is redefined on SMP, so I can't call the paravirt op flush_tlb. Instead, I chose to indicate the actual flush type, kernel (global) vs. user (non-global). Global in this sense means using the global bit in the page table entry, which makes TLB entries persistent across CR3 reloads, not global as in the SMP sense of invoking remote shootdowns, so the term is confusingly overloaded. AK: folded in fix from Zach for PAE compilation Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Add APIC accessors to paravirt-ops.Rusty Russell
Add APIC accessors to paravirt-ops. Unfortunately, we need two write functions, as some older broken hardware requires workarounds for Pentium APIC errata - this is the purpose of apic_write_atomic. AK: replaced __inline with inline Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Allow disable power management under hypervisorRusty Russell
Two legacy power management modes are much easier to just explicitly disable when running in paravirtualized mode - neither APM nor PnP is still relevant. The status of ACPI is still debatable, and noacpi is still a common enough boot parameter that it is not necessary to explicitly disable ACPI. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Disable vdso by default when CONFIG_PARAVIRT is enabledAndi Kleen
They don't work together and this way even glibc still works. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] paravirt: Allow selected bug checks to beRusty Russell
Allow selected bug checks to be skipped by paravirt kernels. The two most important are the F00F workaround (which is either done by the hypervisor, or not required), and the 'hlt' instruction check, which can break under some hypervisors. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Add startup infrastructure for paravirtualizationRusty Russell
1) Each hypervisor writes a probe function to detect whether we are running under that hypervisor. paravirt_probe() registers this function. 2) If vmlinux is booted with ring != 0, we call all the probe functions (with registers except %esp intact) in link order: the winner will not return. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] i386: cpu_detect extractionRusty Russell
Both lhype and Xen want to call the core of the x86 cpu detect code before calling start_kernel. (extracted from larger patch) AK: folded in start_kernel header patch Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: Patch inline replacements for paravirt interceptsRusty Russell
It turns out that the most called ops, by several orders of magnitude, are the interrupt manipulation ops. These are obvious candidates for patching, so mark them up and create infrastructure for it. The method used is that the ops structure has a patch function, which is called for each place which needs to be patched: this returns a number of instructions (the rest are NOP-padded). Usually we can spare a register (%eax) for the binary patched code to use, but in a couple of critical places in entry.S we can't: we make the clobbers explicit at the call site, and manually clobber the allowed registers in debug mode as an extra check. And: Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT. And: AK: Fix warnings in x86-64 alternative.c build And: AK: Fix compilation with defconfig And: ^From: Andrew Morton <akpm@osdl.org> Some binutlises still like to emit references to __stop_parainstructions and __start_parainstructions. And: AK: Fix warnings about unused variables when PARAVIRT is disabled. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: header and stubs for paravirtualisationRusty Russell
Create a paravirt.h header for all the critical operations which need to be replaced with hypervisor calls, and include that instead of defining native operations, when CONFIG_PARAVIRT. This patch does the dumbest possible replacement of paravirtualized instructions: calls through a "paravirt_ops" structure. Currently these are function implementations of native hardware: hypervisors will override the ops structure with their own variants. All the pv-ops functions are declared "fastcall" so that a specific register-based ABI is used, to make inlining assember easier. And: +From: Andy Whitcroft <apw@shadowen.org> The paravirt ops introduce a 'weak' attribute onto memory_setup(). Code ordering leads to the following warnings on x86: arch/i386/kernel/setup.c:651: warning: weak declaration of `memory_setup' after first use results in unspecified behavior Move memory_setup() to avoid this. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andy Whitcroft <apw@shadowen.org>
2006-12-07[PATCH] i386: Fix double #includes in arch/i386Nicolas Kaiser
Fix double #includes in arch/i386 Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: substitute __va lookup with pfn_to_kaddrDavid Rientjes
Substitutes allocate_pgdat virtual address lookup with pfn_to_kaddr macro. Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] x86-64: Don't force inlining of do_csumAndi Kleen
It's two big and used by two callers. Calls should be cheap enough anyways. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: remove IOPL check on task switchChuck Ebbert
IOPL is implicitly saved and restored on task switch, so explicit check is no longer needed. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Fix race in IO-APIC routing entry setup.Andi Kleen
Interrupt could happen between setting the IO-APIC entry and setting its interrupt data. Pointed out by Linus. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Fix race in IO-APIC routing entry setup.Andi Kleen
Interrupt could happen between setting the IO-APIC entry and setting its interrupt data. Pointed out by Linus. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86: comment magic constants in delay.hPaolo 'Blaisorblade' Giarrusso
For both i386 and x86_64, copy from arch/$ARCH/lib/delay.c comments about the used magic constants, plus a few other niceties. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andi Kleen <ak@suse.de> include/asm-i386/delay.h | 5 ++++- include/asm-x86_64/delay.h | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-)
2006-12-07[PATCH] x86-64: Make x86_64 udelay() round up instead of down.Paolo 'Blaisorblade' Giarrusso
Port two patches from i386 to x86_64 delay.c to make sure all rounding is done upward instead of downward. There is no sign in commit messages that the mismatch was done on purpose, and "delay() guarantees sleeping at least for the specified time" is still a valid rule IMHO. The original x86 patches are both from pre-GIT era, i.e.: "[PATCH] round up in __udelay()" in commit 54c7e1f5cc6771ff644d7bc21a2b829308bd126f "[PATCH] add 1 in __const_udelay()" in commit 42c77a9801b8877d8b90f65f75db758822a0bccc (both commits are from converted BK repository to x86_64). AK: fixed gcc warning linux/arch/x86_64/lib/delay.c:43: warning: suggest parentheses around + or - inside shift (did this actually work?) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] Calgary: allow compiling Calgary in but not using it by defaultMuli Ben-Yehuda
This patch makes it possible to compile Calgary in but not use it by default. In this mode, use 'iommu=calgary' to activate it. Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] Calgary: check BBAR ioremap success when ioremappingMuli Ben-Yehuda
This patch cleans up the previous "Use BIOS supplied BBAR information" patch. Mostly stylistic clenaups, but also check for ioremap failure when we ioremap the BBAR rather than when trying to use it. Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Laurent Vivier <Laurent.Vivier@bull.net>
2006-12-07[PATCH] Calgary: use BIOS supplied BBARs and topology informationLaurent Vivier
Find the BBAR register address of each Calgary using the "Extended BIOS Data Area" rather than calculating it ourselves. Also get the bus topology (what PHB each bus is on) from Calgary rather than calculating it ourselves. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=7407. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] calgary: phb_shift can be intMuli Ben-Yehuda
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Move memory map printing and other code to e820.cbibo,mao
This patch moves e820 memory map print and memmap boot param parsing function from setup.c to e820.c, also adds limit_regions and print_memory_map declaration in header file. Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> arch/i386/kernel/e820.c | 152 +++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 158 --------------------------------- include/asm-i386/e820.h | 2 arch/i386/kernel/e820.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 153 ----------------------------------------------- include/asm-i386/e820.h | 2 3 files changed, 155 insertions(+), 152 deletions(-)
2006-12-07[PATCH] i386: Move e820/efi memmap walking code to e820.cbibo,mao
This patch moves e820/efi memmap table walking function from setup.c to e820.c, also this patch adds extern declaration in header file. Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> arch/i386/kernel/e820.c | 115 +++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 118 ----------------------------------- include/asm-i386/e820.h | 2 arch/i386/kernel/e820.c | 115 +++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 118 ----------------------------------------------- include/asm-i386/e820.h | 2 3 files changed, 117 insertions(+), 118 deletions(-)
2006-12-07[PATCH] i386: Move find_max_pfn function to e820.cbibo,mao
Move more code from setup.c into e820.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: create e820.c for e820 map sanitize and copy functionbibo,mao
This patch moves bios e820 map sanitize and copy function from setup.c to e820.c Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> arch/i386/kernel/e820.c | 252 +++++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 240 -------------------------------------------- 2 files changed, 252 insertions(+), 240 deletions(-)
2006-12-07[PATCH] i386: i386 create e820.c to handle standard io/mem resourcesbibo,mao
This patch creates new file named e820.c to hanle standard io/mem resources, moving request_standard_resources function from setup.c to e820.c. Also this patch modifies Makfile to compile file e820.c. Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Makefile | 2 arch/i386/kernel/Makefile | 2 arch/i386/kernel/e820.c | 289 ++++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 276 ------------------------------------------- 3 files changed, 293 insertions(+), 274 deletions(-)
2006-12-07[PATCH] x86-64: Support -mregparm arguments for signals with SA_SIGINFO in ↵Albert Cahalan
compat mode The recent change to make x86_64 support i386 binaries compiled with -mregparm=3 only covered signal handlers without SA_SIGINFO. (the 3-arg "real-time" ones) To be compatible with i386, both types should be supported. Signed-off-by: Albert Cahalan <acahalan@gmail.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Try multiple timer variants in check_timerAndi Kleen
Instead of adding all kinds of more quirks try various timer routing variants in check_timer. In particular this tries to handle quirks from: - Nvidia NF2-4 reference BIOS: wrong timer override - Asus: Wrong timer override but no HPET table - ATI: require timer disabled in 8259 - Some boards: require timer enabled in 8259 We just try many of the the known variants in the hopefully right order in check_timer. Trying pin 0/2 on Nvidia suggested by Tim Hockin. TBD Experimental. Needs a lot of testing Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Use probe_kernel_address instead of __get_user in fault pathsAndi Kleen
Makes the intention of the code cleaner to read and avoids a potential deadlock on mmap_sem. Also change the types of the arguments to not include __user because they're really not user addresses. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Use probe_kernel_address in arch/x86_64/*Andi Kleen
Instead of open coded __get_user Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] Generic: Move __user cast into probe_kernel_addressAndi Kleen
Caller of probe_kernel_address shouldn't need to know that pka is internally implemented with __get_user. So move the __user cast into pka. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Extend clear_irq_vectorYinghai Lu
Clear the irq releated entries in irq_vector, irq_domain and vector_irq instead of clearing irq_vector only. So when new irq is created, it could reuse that vector. (actually is the second loop scanning from FIRST_DEVICE_VECTOR+8). This could avoid the vectors are used up with enough module inserting and removing Cc: Eric W. Biedierman <ebiederm@xmission.com> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-By: Yinghai Lu <yinghai.lu@amd.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Use CLFLUSH instead of WBINVD in change_page_attrAndi Kleen
CLFLUSH is a lot faster than WBINVD so try to use that. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Retrieve CLFLUSH size from CPUIDAndi Kleen
Also report it in /proc/cpuinfo similar to x86-64. Needed for followon patch Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Speed and clean up cache flushing in change_page_attrAndi Kleen
CLFLUSH is a lot faster than WBINVD so avoid the later if at all possible. Always pass the complete list of pages to other CPUs to cut down the number of IPIs. Minor other cleanup and sync with i386 version. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] i386: Fix entry.S code with !CONFIG_VM86Joe Korty
The entry.S code at work_notifysig is surely wrong. It drops into unrelated code if the branch to work_notifysig_v86 is taken, and CONFIG_VM86=n. [PATCH] Make vm86 support optional tree 9b5daef5280800a0006343a17f63072658d91a1d pushed to git Jan 8, 2006, and first appears in 2.6.16 The 'fix' here is to also compile out the vm86 test & branch when CONFIG_VM86=n. Signed-off-by: Joe Korty <joe.korty@ccur.com> Signed-off-by: Andi Kleen <ak@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 22:58:00 +0000