aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-01[PATCH] libata: fix passthru sense data headerTejun Heo
sb[7] should contain the length of whole information sense data descriptor while desc[1] should contain the number of following bytes in the descriptor. ie. 14 for sb[7] but 12 for desc[1]. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: sync result_tf.flags w/ command tf.flagsTejun Heo
libata didn't initialize result_tf.flags which indicates transfer type (RW/FUA) and address type (CHS/LBA/LBA48). ata_gen_fixed_sense() assumed result_tf.flags equals command tf.flags and failed to report the first failed block to SCSI layer because zero tf flags indicates CHS and bad block reporting for CHS is not implemented. Implement fill_result_tf() which sets result_tf.flags to command tf.flags and use it to fill result_tf. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: trivial updates to ata_sg_init_one()Tejun Heo
There's no need to memset &qc->sgent manually, sg_init_one() clears sgent inside it. Also, kill not-so-necessary sg local variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: improve failed qc reportingTejun Heo
Improve failed qc reporting. The original message didn't include the actual command nor full error status and it was necessary to temporarily patch the code to find out exactly which command is causing problem. This patch makes EH report full command and result TFs along with data direction and length. This change will make bug reports more useful. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ata_piix: strip now unneded MAP related stuffTejun Heo
Now that PCS isn't used for device detection anymore... * esb_sata is identical to ich5_sata * no reason to know present_shift * no reason to store map_db in host private area The MAP table itself is left because it can be used for SCR access. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ata_piix: apply device detection via polling IDENTIFYTejun Heo
PATA PIIX uses reset signature + TF r/w test for device presence detection, which doesn't always work. It sometimes reports phantom device which results in IDENTIFY timeouts. SATA PIIX uses some combination of PCS + reset signature + TF r/w test for device presence detection. No combination satifies all and for some controllers, there doesn't seem to be any combination which works reliably. This patch makes both PATA and SATA piix's use reset signature + TF r/w + polling IDENTIFY for device detection. This is what the old libata (before irq-pio and new EH) did and what IDE does. This patch also removes now obsolete PIIX_FLAG_IGNORE_PCS, force_pcs and related code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: implement presence detection via polling IDENTIFYTejun Heo
On some controllers (ICHs in piix mode), there is *NO* reliable way to determine device presence other than issuing IDENTIFY and see how the transaction proceeds by watching the TF status register. libata acted this way before irq-pio and phantom devices caused very little problem but now that IDENTIFY is performed using IRQ drive PIO, such phantom devices now result in multiple 30sec timeouts during boot. This patch implements ATA_FLAG_DETECT_POLLING. If a LLD sets this flag, libata core issues the initial IDENTIFY in polling mode and if the initial data transfer fails w/ HSM violation, the port is considered to be empty thus replicating the old libata and IDE behavior. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id()Tejun Heo
Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ata_piix: clean up port flagsTejun Heo
* move common flags into PIIX_PATA_FLAGS and PIIX_SATA_FLAGS * kill unnecessary ATA_FLAG_SRST Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limitTejun Heo
Many drives support LBA48 even when its capacity is smaller than 1<<28, as LBA48 is required for many functionalities. FLUSH_EXT is mandatory for drives w/ LBA48 support. Interestingly, at least one of such drives (ST960812A) has problems dealing with FLUSH_EXT. It eventually completes the command but takes around 7 seconds to finish in many cases thus drastically slowing down IO transactions. This seems to be a firmware bug which sneaked into production probably because no other ATA driver including linux IDE issues FLUSH_EXT to drives which report support for LBA48 & FLUSH_EXT but is smaller than 1<<28 blocks. This patch adds ATA_DFLAG_FLUSH_EXT which is set iff the drive supports LBA48 & FLUSH_EXT and is larger than LBA28 limit. Both cache flush paths are updated to issue FLUSH_EXT only when the flag is set. Note that the changed behavior is more inline with the rest of libata. libata prefers shorter commands whenever possible. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Danny Kukawka <dkukawka@novell.com> Cc: Stefan Seyfried <seife@novell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ahci: honor PORTS_IMPL on ICH8sTejun Heo
Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[libata] ARM: add ixp4xx PATA driverAlessandro Zummo
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_sis: slave support on SiS965Uwe Koziolek
SiS965 and SiS180 chips must support slave mode, SiS965L and SiS964 chips must not support slave mode. SCR_STATUS for SATA ports in powerdown state fixed. Now returning 0x0113 instead of 0x0117. Avoids problem on detecting sata_sis controller. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ahci: preserve PORTS_IMPL over host resetsTejun Heo
Instead of writing 0xf blindly, preserve the content of write-once PORTS_IMPL register over host resets. This patch is taken from Jeff Garzik's AHCI init update patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pdc202xx_old: Fix name clashes with PA-RISCAlan Cox
pdc_* functions are part of the global namespace for the PDC on PA-RISC systems and this means our choice of pdc_ causes collisions between the PDC globals and our static functions. Rename them to pdc202xx where they are for both 2024x and 2026x. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[libata] ahci: Match PCI class code for AHCIJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: move dev->max_sectors configuration into ata_dev_configure()Tejun Heo
Move dev->max_sectors configuration from ata_scsi_dev_config() to ata_dev_configure(). * more consistent. * allows LLDs to peek at the default dev->max_sectors value. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODETejun Heo
libata EH used to perform ata_set_mode() iff the EH session performed reset as indicated by ATA_EHI_DID_RESET. This is incorrect because ->dev_config() called by revalidation is allowed to modify transfer mode which ata_set_mode() should take care of. This patch implements the following two flags. * ATA_EHI_SETMODE: set during EH to schedule ata_set_mode(). Both new device attachment and revalidation set this flag. * ATA_EHI_POST_SETMODE: set while the device is revalidated after ata_set_mode(). Post-setmode revalidation is different from initial configuaration and EH revalidation in that ->dev_config() is not allowed tune transfer mode. LLD can use this flag to determine whether it's allowed to tune transfer mode. Note that POST_SETMODE ->dev_config() is guaranteed to be preceded by non-POST_SETMODE ->dev_config(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: implement ATA_EHI_PRINTINFOTejun Heo
Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ahci: update ahci-vt8251 reset sequenceTejun Heo
ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: separate out and export sata_port_hardreset()Tejun Heo
Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ahci: kill AHCI_FLAG_RESET_NEEDS_CLOTejun Heo
Now that ahci_softreset() is fixed to automatically perform CLO if BSY/DRQ is set on entry, AHCI_FLAG_RESET_NEEDS_CLO is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_sil24: add PMP related constantsTejun Heo
Add PMP related constants. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_sil24: rename PMP related constantsTejun Heo
Rename PMP related constants for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: make user scan wait for scan to completeTejun Heo
Make user scan wait for scan to complete. This way user can wait for warm plug request to complete and is prevented from causing EH event storm by repetitively issuing scan request while EH is in progress. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Fajun Chen <fajunchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_nv: SRST sometimes fails after hotplug, use HRST_TO_RESUMETejun Heo
NV controllers sometimes fail to perform softreset after hotplug. Make it use hardreset to resume link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: move ata_irq_on() into libata-sff.cTejun Heo
ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: handle 0xff status properlyTejun Heo
libata waits for !BSY even when the status register reports 0xff. This causes long boot delays when D8 isn't pulled down properly. This patch does the followings. * don't wait if status register is 0xff in all wait functions * make ata_busy_sleep() return 0 on success and -errno on failure. -ENODEV is returned on 0xff status and -EBUSY on other failures. * make ata_bus_softreset() succeed on 0xff status. 0xff status is not reset failure. It indicates no device. This removes unnecessary retries on such ports. Note that the code change assumes unoccupied port reporting 0xff status does not produce valid device signature. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Joe Jin <lkmaillist@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ata: Generic platform_device libata driverPaul Mundt
needs a changelog Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: Revamp blacklist support to allow multiple kinds of ↵Alan Cox
blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_nv ADMA/NCQ support for nForce4Robert Hancock
This patch adds support for ADMA mode on NVIDIA nForce4 (CK804/MCP04) SATA controllers to the sata_nv driver. Benefits of ADMA mode include: - NCQ support - Reduced CPU overhead (controller DMAs command information from memory instead of them being pushed in by the CPU) - Full 64-bit DMA support ADMA mode is enabled by default in this version. To disable it, set the module parameter adma_enabled=0. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[libata] pata_marvell: minor and trivial cleanupsJeff Garzik
- use pci_iomap() [Alan, version 0.0.5t] - fix Alan's version 0.0.5t change - line length, trailing whitespace, case indentation cleanups - don't use deprecated ->eng_timeout() in a driver that uses new EH Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_marvell: Marvell 6101/6145 PATA driverAlan Cox
This is a legacy mode PATA driver for the 6101/45 and will also drive the SATA ports 1 & 2 in legacy mode as well if desired. Tested and confirmed working by users. The chip supports AHCI type behaviour for SATA and has a more advanced PATA interface as well so this driver will get it working but not get best performance for now. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pci_module_init() conversion for pata_pdc2027xHenrik Kretzschmar
pci_module_init() conversion for pata_pdc2027x Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: add 40pin "short" cable support, honour drive side speed ↵Alan Cox
detection [deweerdt@free.fr: build fix] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Frederik Deweerdt <deweerdt@free.fr> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pci_module_init-convertion-in-ata_genericc fixAlan Cox
Acked-by: Alan Cox <alan@redhat.com> but please apply as follows to keep revision id straight Cc: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pci_module_init convertion in ata_generic.cHenrik Kretzschmar
pci_module_init convertion in ata_generic.c. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: Winbond supportAlan Cox
Winbond 83759A support in non-multichip mode (afaik nobody ever used multichip mode anyway). The 83759 is not supported by this driver as it is already handled elsewhere and doens't use the same interfaces. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 4 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 3 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 2 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 1 [WATCHDOG] MIPS RM9000 on-chip watchdog device [WATCHDOG] Add iTCO vendor specific support [WATCHDOG] sc1200wdt.c pnp unregister fix. [WATCHDOG] config.h removal [WATCHDOG] NS pc87413-wdt Watchdog driver - fixes [WATCHDOG] NS pc87413-wdt Watchdog driver v1.1 [WATCHDOG] NS pc87413-wdt Watchdog driver
2006-12-01Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: add missing sht->slave_destroy [PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers
2006-12-01Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (31 commits) [MIPS] Remove duplicate ISA DMA code for 0 DMA channel case. [MIPS] Remove unused definition of cpu_to_lelongp() [MIPS] Remove userspace proofing from <asm/bitops.h>. [MIPS] Remove old junk left from old atomic_lock. [MIPS] Use conditional traps for BUG_ON on MIPS II and better. [MIPS] mips HPT cleanup: make clocksource_mips public [MIPS] do_IRQ cleanup [MIPS] Avoid dupliate D-cache flush on R400C / R4400 SC and MC variants. [MIPS] Remove redundant r4k_blast_icache() calls [MIPS] Work around bogus gcc warnings. [MIPS] Fix double inclusions [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irq [MIPS] IRQ cleanups [MIPS] mips hpt cleanup: get rid of mips_hpt_init [MIPS] PB1200: Remove duplicate definitions [MIPS] Fix alignment hole in struct cache_desc; shrink struct. [MIPS] Oprofile: kernel support for the R10000. [MIPS] Remove unused R10000 performance counter definitions. [MIPS] Add support for kexec [MIPS] Don't print presence of WAIT instruction on bootup. ...
2006-12-01Merge branch 'for-2.6.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-2.6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: validate kernel object classes and permissions SELinux: ensure keys constant in hashtab_search SELinux: export object class and permission definitions SELinux: remove current object class and permission validation mechanism
2006-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (25 commits) IB/ucm: Fix deadlock in cleanup IB/cm: Fix automatic path migration support IPoIB: Fix skb leak when freeing neighbour IB/srp: Fix memory leak on reconnect RDMA/addr: list_move() cleanups RDMA/addr: Fix some cancellation problems in process_req() RDMA/amso1100: Prevent deadlock in destroy QP IB/mthca: Fix initial SRQ logsize for mem-free HCAs IB/ehca: Use WQE offset instead of WQE addr for pending work reqs RDMA/iwcm: Fix comment for iwcm_deref_id() to match code RDMA/iwcm: Remove unnecessary function argument RDMA/iwcm: Remove unnecessary initializations RDMA/iwcm: Fix memory leak RDMA/iwcm: Fix memory corruption bug in cm_work_handler() IB: Convert kmem_cache_t -> struct kmem_cache IB/ipath: Fix typo in pma_counter_select subscript RDMA/amso1100: Fix section mismatches IB/mthca: Fix section mismatches IB/srp: Increase supported CDB size RDMA/cm: Remove setting local write as part of QP access flags ...
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits) PCI: make arch/i386/pci/common.c:pci_bf_sort static PCI: ibmphp_pci.c: fix NULL dereference pciehp: remove unnecessary pci_disable_msi pciehp: remove unnecessary free_irq PCI: rpaphp: change device tree examination PCI: Change memory allocation for acpiphp slots i2c-i801: SMBus patch for Intel ICH9 PCI: irq: irq and pci_ids patch for Intel ICH9 PCI: pci_{enable,disable}_device() nestable ports PCI: switch pci_{enable,disable}_device() to be nestable PCI: arch/i386/kernel/pci-dma.c: ioremap balanced with iounmap pci/i386: style cleanups PCI: Block on access to temporarily unavailable pci device pci: fix __pci_register_driver error handling pci: clear osc support flags if no _OSC method acpiphp: fix missing acpiphp_glue_exit() acpiphp: fix use of list_for_each macro Altix: Initial ACPI support - ROM shadowing. Altix: SN ACPI hotplug support. Altix: Add initial ACPI IO support ...
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) Driver core: show drivers in /sys/module/ Documentation/driver-model/platform.txt update/rewrite Driver core: platform_driver_probe(), can save codespace driver core: Use klist_remove() in device_move() driver core: Introduce device_move(): move a device to a new parent. Driver core: make drivers/base/core.c:setup_parent() static driver core: Introduce device_find_child(). sysfs: sysfs_write_file() writes zero terminated data cpu topology: consider sysfs_create_group return value Driver core: Call platform_notify_remove later ACPI: Change ACPI to use dev_archdata instead of firmware_data Driver core: add dev_archdata to struct device Driver core: convert sound core to use struct device Driver core: change mem class_devices to be real devices Driver core: convert fb code to use struct device Driver core: convert firmware code to use struct device Driver core: convert mmc code to use struct device Driver core: convert ppdev code to use struct device Driver core: convert PPP code to use struct device Driver core: convert cpuid code to use struct device ...
2006-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix timezone handling on stat to os/2 [CIFS] Incorrect hardlink count when original file is cached (oplocked)
2006-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Fix typos in drivers/isdn/hisax/isdnl2.c Fix typos in doc and comments BUG_ON conversion for fs/aio.c BUG_ON conversion for drivers/mmc/omap.c BUG_ON conversion for drivers/media/video/pwc/pwc-if.c Fix misc .c/.h comment typos Fix misc Kconfig typos Fix typos in /Documentation : Misc Fix typos in /Documentation : 'U-Z' Fix typos in /Documentation : 'T'' Fix jiffies.h comment tabify MAINTAINERS fix spelling error in include/linux/kernel.h mqueue.h: don't include linux/types.h
2006-12-01Driver core: show drivers in /sys/module/Kay Sievers
Show the drivers, which belong to the module: $ ls -l /sys/module/usbcore/drivers/ hub -> ../../../bus/usb/drivers/hub usb -> ../../../bus/usb/drivers/usb usbfs -> ../../../bus/usb/drivers/usbfs Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01Documentation/driver-model/platform.txt update/rewriteDavid Brownell
This is almost a rewrite of the driver-model/platform.txt documentation; the previous text was obsolete (for several years), evidently it never got updated to match the change from being a PC "legacy_bus" to the more widely used core bus for most embedded systems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 03:52:07 +0000