aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-16ide-h8300: use struct ide_port_infoBartlomiej Zolnierkiewicz
Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16rapide: use struct ide_port_infoBartlomiej Zolnierkiewicz
Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16cmd640: add ->init_dev methodBartlomiej Zolnierkiewicz
Convert the driver to use ->init_dev method instead of open-coding devices init in cmd640x_init(). While at it: - fix printk()-s to use KERN_INFO level instead of the default KERN_ERR - use DRV_NAME define in printk()-s - set proper ->pio_mask also for CONFIG_BLK_DEV_CMD640_ENHANCED=n There should be no functional changes caused by this patch (except fixing printk()-s levels). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: ->port_init_devs -> ->init_devBartlomiej Zolnierkiewicz
Change ->port_init_devs method to take 'ide_drive_t *' as an argument instead of 'ide_hwif_t *' and rename it to ->init_dev. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16cmd640: fix warm-plug support for the secondary interfaceBartlomiej Zolnierkiewicz
Register secondary interface also when user requested not to probe devices. While at it: - remove write-only second_port_toggled variable Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16powerpc/ide: remove mpc8xx-ide driverArnd Bergmann
This driver was only used by arch/ppc code and is obsolete now with the move to common arch/powerpc code. [bart: port it over IDE tree, remove leftover 'choice' from Kconfig] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16swarm: use struct ide_port_infoBartlomiej Zolnierkiewicz
Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Tested-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: tighten checks on PCI BARs in ide_hwif_configure()Bartlomiej Zolnierkiewicz
Alan has fixed PCI layer handling of PCI IDE in Compatibility mode so PCI BAR 0/1 (and/or 2/3) content reported by kernel should never be zero. Tighten checks on PCI BARs and also fix printk() message while on it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16sgiioc4: use driver name for resource allocationBartlomiej Zolnierkiewicz
Cc: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16icside: use ide_init_port_hw()Bartlomiej Zolnierkiewicz
* Move ide_find_port() and default_hwif_mmiops() calls from icside_setup() to icside_register_v{5,6}(). * Convert icside_setup() to initialize hw_regs_t instead ide_hwif_t and icside_register_v{5,6}() to use ide_init_port_hw(). * Rename icside_setup() to icside_setup_ports(). There should be no functional changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16icside: don't use hwif->hwif_dataBartlomiej Zolnierkiewicz
* Move ecard_set_drvdata() from icside_probe() to icside_register_v{5,6}(), then use state->ioc_base instead of hwif->hwif_data in icside_maskproc() and icside_dma_test_irq(). While at it: * Add sel field to struct icside_state, then use state->{sel,ioc_base} instead of ->{select,config}_data in icside_dma_setup(). There should be no functional changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide-cs: use struct ide_port_infoBartlomiej Zolnierkiewicz
Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide_4drives: use struct ide_port_infoBartlomiej Zolnierkiewicz
Convert the driver to use struct ide_port_info - as a nice side-effect this fixes hwif->channel initialization. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16au1xxx-ide: don't use hwif->hwif_dataBartlomiej Zolnierkiewicz
* Use &auide_hwif directly instead of using hwif->hwif_data. While at it: * No need to initialize hwif->{select,config}_data. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: set hwif->dev in ide_init_port_hw() (take 2)Bartlomiej Zolnierkiewicz
* Add 'parent' field to hw_regs_t for optional parent device pointer (needed by macio PMAC IDE controllers) and set hwif->dev in ide_init_port_hw(). * Update au1xxx-ide.c, sgiioc4.c, pmac.c and setup-pci.c accordingly. v2: * Update scc_pata.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: make ide_hwifs[] staticBartlomiej Zolnierkiewicz
Move ide_hwifs[] from ide.c to ide-probe.c and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: fix hwif-s initializationBartlomiej Zolnierkiewicz
* Add ide_hwifs[] entry initialization to ide_find_port_slot() and remove ide_init_port_data() calls from host drivers. * Unexport ide_init_port_data(). * Remove no longer needed init_ide_data(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: move PIO blacklist to ide-pio-blacklist.cBartlomiej Zolnierkiewicz
Move PIO blacklist to ide-pio-blacklist.c. While at it: - fix comment - fix whitespace damage There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: remove no longer used ide_pio_timings[]Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: move ide_pio_cycle_time() to ide-timings.cBartlomiej Zolnierkiewicz
All ide_pio_cycle_time() users already select CONFIG_IDE_TIMINGS so move the function from ide-lib.c to ide-timings.c. While at it: - convert ide_pio_cycle_time() to use ide_timing_find_mode() - cleanup ide_pio_cycle_time() a bit There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide-pmac: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
Also update my Copyrights while at it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide-mpc8xx: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
Also fix (disabled) debugging code while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16sl82c105: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16cy82c693: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16cmd64x: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16cmd640: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16alim15x3: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16qd65xx: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ht6560b: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ali14xx: convert to use ide_timing_find_mode()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: convert ide-timing.h to ide-timings.c library (take 2)Bartlomiej Zolnierkiewicz
* Don't include ide-timing.h in cs5535 and sis5513 host drivers (they don't need it currently). * Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS config option to be selected by host drivers using the library. While at it: - fix ide_timing_find_mode() placement v2: * Add missing EXPORT_SYMBOLs. (Stephen Rothwell <sfr@canb.auug.org.au>) There should be no functional changes caused by this patch. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: checkpatch.pl fixes for ide-timing.hBartlomiej Zolnierkiewicz
Also fix placement of comments in ide_timing_compute() while at it. There should be no functional changes caused by this patch (md5sum was verified to be the same before/after the patch). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: remove XFER_* masks from ide-timing.hBartlomiej Zolnierkiewicz
* Check requested xfer mode against xfer modes instead of XFER_* masks in ide_timing_compute() and cs5535.c::cs5535_set_speed(). * Remove XFER_[MODE,MWDMA,EPIO,PIO] masks. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: move some bits from ide-timing.h to <linux/ide.h>Bartlomiej Zolnierkiewicz
Move struct ide_timing and IDE_TIMING_* defines to <linux/ide.h> from drivers/ide/ide-timing.h. While at it: - use u8/u16 instead of short for struct ide_timing fields - use enum for IDE_TIMING_* There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: use u8 for xfer modes in ide-timing.hBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: remove unused XFER_UDMA_SLOWBartlomiej Zolnierkiewicz
Remove unused XFER_UDMA_SLOW from ide_timing[]. While at it: - fix re-defining XFER_PIO_5 (no need to define it in ide-timing.h as it is defined in <linux/ata.h> which is included by <linux/hdreg.h>) - fix whitespace damage There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: remove needless includes from ide-lib.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16BAST: Remove old IDE driverBen Dooks
Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: use the dma safe check for REQ_TYPE_ATA_PCFUJITA Tomonori
This uses the dma safe check for REQ_TYPE_ATA_PC. The dma safe check is used for only sg requests but it should be used for other non fs commands. This uses blk_queue_update_dma_pad to make the intention clear though ide don't use the blk APIs so it doesn't change anything. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: avoid DMA on the stack for REQ_TYPE_ATA_PCFUJITA Tomonori
Some REQ_TYPE_ATA_PC commands uses the stack buffers for DMA, which leads to memory corruption on a non-coherent platform. With regard to alignment and padding, ide-cd has the the dma safe check for sg requests and REQ_TYPE_ATA_PC. This adds the stack buffer check to that check. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: it821x in pass-through mode segfaults in 2.6.26-stableDimitri Gorokhovik
The driver of ITE8212 in pass-through mode (it8212.noraid=1 on cmndline) attempts to use the field `.dma_host_set' of the struct ide_dma_ops in `ide_config_drive_speed' which is set to NULL by default. So give a value to all fields of the struct ide_dma_ops. Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (249 commits) powerpc: Fix pte_update for CONFIG_PTE_64BIT and !PTE_ATOMIC_UPDATES powerpc: Fix a build problem on ppc32 with new DMA_ATTRs ibm_newemac: Add MII mode support to the EMAC RGMII bridge. powerpc: Don't spin on sync instruction at boot time powerpc: Add VSX load/store alignment exception handler powerpc: fix giveup_vsx to save registers correctly powerpc: support for latencytop powerpc: Remove unnecessary condition when sanity-checking WIMG bits powerpc: Add PPC_FEATURE_PSERIES_PERFMON_COMPAT powerpc: Add driver for Barrier Synchronization Register powerpc: mman.h export fixups powerpc/fsl: update crypto node definition and device tree instances powerpc/fsl: Refactor device bindings powerpc/85xx: Minor fixes for 85xxds and 8536ds board. powerpc: Add 82xx/83xx/86xx to 6xx Multiplatform powerpc/85xx: publish of device for cds platforms powerpc/booke: don't reinitialize time base powerpc/86xx: Refactor pic init powerpc/CPM: Add i2c pins to dts and board setup cpm_uart: Support uart_wait_until_sent() ...
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits) [SCSI] scsi_dh: fix kconfig related build errors [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h [SCSI] make struct scsi_{host,target}_type static [SCSI] fix locking in host use of blk_plug_device() [SCSI] zfcp: Cleanup external header file [SCSI] zfcp: Cleanup code in zfcp_erp.c [SCSI] zfcp: zfcp_fsf cleanup. [SCSI] zfcp: consolidate sysfs things into one file. [SCSI] zfcp: Cleanup of code in zfcp_aux.c [SCSI] zfcp: Cleanup of code in zfcp_scsi.c [SCSI] zfcp: Move status accessors from zfcp to SCSI include file. [SCSI] zfcp: Small QDIO cleanups [SCSI] zfcp: Adapter reopen for large number of unsolicited status [SCSI] zfcp: Fix error checking for ELS ADISC requests [SCSI] zfcp: wait until adapter is finished with ERP during auto-port [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver [SCSI] sg: Add target reset support [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC [SCSI] sd: Move scsi_disk() accessor function to sd.h ...
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert crypto: prng - Deterministic CPRNG
2008-07-15ftrace: ftrace.txt updatesSteven Rostedt
This patch includes ftrace.txt updates that address (mostly) comments from Andrew Morton. It also includes updates that were suggested by Randy Dunlap, John Kacur and David Teigland. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16Merge commit 'origin/master'Benjamin Herrenschmidt
Manual merge of: arch/powerpc/Kconfig arch/powerpc/kernel/stacktrace.c arch/powerpc/mm/slice.c arch/ppc/kernel/smp.c
2008-07-15Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix TSC build error on 32bit
2008-07-15Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (54 commits) [MIPS] Remove mips_machtype for LASAT machines [MIPS] Remove mips_machtype from EMMA2RH machines [MIPS] Remove mips_machtype from ARC based machines [MIPS] MTX-1 flash partition setup move to platform devices registration [MIPS] TXx9: cleanup and fix some sparse warnings [MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xx [MIPS] remove machtype for group Toshiba [MIPS] separate rbtx4927_time_init() and rbtx4937_time_init() [MIPS] separate rbtx4927_arch_init() and rbtx4937_arch_init() [MIPS] txx9_cpu_clock setup move to rbtx4927_time_init() [MIPS] txx9_board_vec set directly without mips_machtype [MIPS] IP22: Add platform device for Indy volume buttons [MIPS] cmbvr4133: Remove support [MIPS] remove wrppmc_machine_power_off() [MIPS] replace inline assembler to cpu_wait() [MIPS] IP22/28: Add platform devices for HAL2 [MIPS] TXx9: Update and merge defconfigs [MIPS] TXx9: Make single kernel can support multiple boards [MIPS] TXx9: Update defconfigs [MIPS] TXx9: Reorganize PCI code ...
2008-07-15Don't crash on IOMMU overflow in A100U2W driverMikulas Patocka
Handle IOMMU overflow correctly, by retrying. IOMMU errors can happen and drivers must deal with them. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-15BUG_ON on kernel misbehavior on A100U2W driverMikulas Patocka
With broken Sparc64 IOMMU accounting, the kernel submits larger requests then allowed. Better to crash on BUG than corrupt memory. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 02:24:37 +0000