aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-12libata: Correct IORDY handlingAlan Cox
Debugging a report of a problem with an ancient solid state disk showed up some problems in the IORDY handling 1. We check the wrong bit to see if the device has IORDY 2. Even then some ancient creaking piles of crap don't support SETXFER at all. The cases it fixes are obscure and the risk of side effects is slight but possible. This also moves us slightly closer to supporting original MFM/RLL disks with libata. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: update Power Management to handle PMP linksTejun Heo
Update Power Management to consider PMP links. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: update hotplug to handle PMP linksTejun Heo
Update hotplug to handle PMP links. When PMP is attached, the PMP number corresponds to C of SCSI H:C:I:L. While at it, change argument to ata_find_dev() to @devno from @id to avoid confusion with SCSI device ID. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: update EH to deal with PMP linksTejun Heo
Update ata_eh_autopsy(), ata_eh_report(), ata_eh_revalidate_and_attach() and ata_eh_recover() to deal with PMP links. ata_eh_autopsy() and ata_eh_report() updates are straightforward. They just repeat the same operation over all configured links. The only change to ata_eh_revalidate_and_attach() is avoiding calling ->cable_select() on non-host ports. ata_eh_recover() update is more complex as it first processes all resets and then performs the rest. This is necessary as thawing with some links in unknown state can be dangerous. ehi->action is cleared on successful recovery of a link to avoid repeating recovery due to failures in other links. ata_eh_recover() iterates over only PMP links if PMP is attached, and, on failure, the failing link is returned in @failed_link instead of disabling devices directly. These are to integrate ata_eh_recover() into PMP EH later. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: update ata_scsi_error() to handle PMP linksTejun Heo
Update ata_scsi_error() to handle PMP links. As error conditions can occur on both host and PMP links, __ata_port_for_each_link() is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: add PMP linksTejun Heo
Add link->pmp, ap->nr_pmp_links, ap->pmp_link[], and implement/update link helpers. printk helpers are updated such that port and link are identifed as 'ataP:' if no PMP is attached, while device is identified as 'ataP.DD:'. If PMP is attached, they become 'ataP:', 'ataP.LL:' and 'ataP.LL' - ie. link and device are identified their PMP number. If PPM is attached (ap->nr_pmp_links != 0), ata_for_each_link() iterates over PMP links, while __ata_for_each_link() iterates over the host link + PMP links. If PMP is not attached (ap->nr_pmp_links == 0), both iterate over only the host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: implement ata_link_abort()Tejun Heo
Implement ata_link_abort(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: separate out link initialization functionsTejun Heo
Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flagsTejun Heo
HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: linkify config/EH related functionsTejun Heo
Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: linkify resetTejun Heo
Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: linkify EH action helpersTejun Heo
Make ata_eh_about_to_do() and ata_eh_done() deal with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: linkify PHY-related functionsTejun Heo
Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: implement and use link/device iteratorsTejun Heo
Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: introduce ata_linkTejun Heo
Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] pdc_adma: convert to new exception handling (EH) frameworkJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12Fix up more bio falloutAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ZLIB]: Fix external builds of zlib_inflate code. [TG3]: Fix APE induced regression [SKY2]: version 1.19 [SKY2]: use netdevice stats struct [SKY2]: fiber advertise bits initialization (trivial) [SKY2]: fix power settings on Yukon XL [SKY2]: ethtool register reserved area blackout
2007-10-11missed bio_endio() in axonramAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11[ZLIB]: Fix external builds of zlib_inflate code.David S. Miller
Move zlib_inflate_blob() out into it's own source file, infutil.c, so that things like the powerpc zImage builder in arch/powerpc/boot/Makefile don't end up trying to compile it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TG3]: Fix APE induced regressionMatt Carlson
This patch fixes a bug caused by the recent APE support added for 5761 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[SKY2]: version 1.19Stephen Hemminger
Update version to keep track of new changes. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[SKY2]: use netdevice stats structStephen Hemminger
Use builtin statistics structure from net device. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[SKY2]: fiber advertise bits initialization (trivial)Stephen Hemminger
Put initialization in sequential order (same as other constants). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[SKY2]: fix power settings on Yukon XLStephen Hemminger
Make sure PCI register for PHY power gets set correctly. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[SKY2]: ethtool register reserved area blackoutStephen Hemminger
Make sure and not dump reserved areas of device space. Touching some of these causes machine check exceptions on boards like D-Link DGE-550SX. Coding note, used a complex switch statement rather than bitmap because it is easier to relate the block values to the documentation rather than looking at a encoded bitmask. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_mv: more S/G fixes
2007-10-12[libata] sata_mv: more S/G fixesJeff Garzik
* corruption fix: we only want the lower 16 bits of length (0 == 64kb) * ditto: the upper layer sets max-phys-segments to LIBATA_MAX_PRD, so we must reset it to own hw-specific length. * delete unused mv_fill_sg() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-11JFS: fix bio-related build breakageJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[POWERPC] Add memchr() to the bootwrapperDavid Gibson
This adds a memchr() implementation to the bootwrapper, which will be needed when libfdt is merged in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Implement logging of unhandled signalsOlof Johansson
Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Add legacy serial support for OPB with flattened device treeValentine Barshak
Currently find_legacy_serial_ports() can find no serial ports on the OPB with flattened device tree. Thus no legacy boot console can be initialized. Just the early udbg console works, which is initialized with udbg_init_44x_as1 on the UART's physical address specified in kernel config. This happens because we look for ns16750 serial devices only and expect opb node to have a device type property. This patch makes it look for ns16550-compatible devices and use of_device_is_compatible() for opb in case device type is not specified. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Use 1TB segmentsPaul Mackerras
This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Allow fixed framebuffer base addressGrant Likely
Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Add support for custom screen resolutionGrant Likely
Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Use pdata to pass around framebuffer parametersGrant Likely
The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pciValentine Barshak
Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits) mlx4_core: Fix section mismatches IPoIB: Allow setting policy to ignore multicast groups IB/mthca: Mark error paths as unlikely() in post_srq_recv functions IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages. IB/ipath: Remove redundant link state checks IB/ipath: Fix IB_EVENT_PORT_ERR event IB/ipath: Better handling of unexpected GPIO interrupts IB/ipath: Maintain active time on all chips IB/ipath: Fix QHT7040 serial number check IB/ipath: Indicate a couple of chip bugs to userspace IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close IB/ipath: Remove duplicate copy of LMC IB/ipath: Add ability to set the LMC via the sysfs debugging interface IB/ipath: Optimize completion queue entry insertion and polling IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED IB/ipath: Generate flush CQE when QP is in error state IB/ipath: Remove redundant code IB/ipath: Future proof eeprom checksum code (contents reading) IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate ...
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (80 commits) [MIPS] tlbex.c: Cleanup __init usage. [MIPS] WRPPMC serial support move to platform device [MIPS] R1: Fix hazard barriers to make kernels work on R2 also. [MIPS] VPE: reimplement ELF loader. [MIPS] cleanup WRPPMC include files [MIPS] Add BUG_ON assertion for attempt to run kernel on the wrong CPU type. [MIPS] SMP: Use ISO C struct initializer for local structs. [MIPS] SMP: Kill useless casts. [MIPS] Kill num_online_cpus() loops. [MIPS] SMP: Implement smp_call_function_mask(). [MIPS] Make facility to convert CPU types to strings generally available. [MIPS] Convert list of CPU types from #define to enum. [MIPS] Optimize get_unaligned / put_unaligned implementations. [MIPS] checkfiles: Fix "need space after that ','" errors. [MIPS] Fix "no space between function name and open parenthesis" warnings. [MIPS] Allow hardwiring of the CPU type to a single type for optimization. [MIPS] tlbex: Size optimize code by declaring a few functions inline. [MIPS] pg-r4k.c: Dump the generated code [MIPS] Cobalt: Remove cobalt_machine_power_off() [MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.c ...
2007-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits) ide: use only ->set_pio_mode method for programming PIO modes (take 2) sis5513: don't change UDMA settings when programming PIO it8213/piix/slc90e66: don't change DMA settings when programming PIO alim15x3: PIO mode setup fixes siimage: fix ->set_pio_mode method to select PIO data transfer cs5520: don't enable VDMA in ->speedproc sc1200: remove redundant warning message from sc1200_tune_chipset() ide-pmac: PIO mode setup fixes (take 3) icside: fix ->speedproc to return on unsupported modes (take 5) sgiioc4: use ide_tune_dma() amd74xx/via82cxxx: use ide_tune_dma() ide: add ide_set{_max}_pio() (take 4) ide: Kconfig face-lift ide: move ide_rate_filter() calls to the upper layer (take 2) sis5513: add ->udma_filter method for chipset_family >= ATA_133 ide: mode limiting fixes for user requested speed changes ide: add missing ide_rate_filter() calls to ->speedproc()-s ide: call udma_filter() before resorting to the UltraDMA mask ide: make jmicron match vendor and device class pdc202xx_new: switch to using pci_get_slot() (take 2) ...
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Update Cobalt Qube series front LED support leds: Add Cobalt Raq series LEDs support leds: Rename leds-cobalt driver
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Convert corgi backlight driver into a more generic driver backlight: Add Samsung LTV350QV LCD driver backlight: Fix cr_bllcd allocations and error paths backlight/leds: Make two structs static
2007-10-11Merge branch 'dmi-const' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'dmi-const' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/firmware: const-ify DMI API and internals
2007-10-11Merge branch 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-block: (37 commits) [BLOCK] Fix failing compile with BLK_DEV_IO_TRACE=n compat_ioctl: move floppy handlers to block/compat_ioctl.c compat_ioctl: move cdrom handlers to block/compat_ioctl.c compat_ioctl: move BLKPG handling to block/compat_ioctl.c compat_ioctl: move hdio calls to block/compat_ioctl.c compat_ioctl: handle blk_trace ioctls compat_ioctl: add compat_blkdev_driver_ioctl() compat_ioctl: move common block ioctls to compat_blkdev_ioctl Sysace: Don't enable IRQ until after interrupt handler is registered Sysace: sparse fixes Sysace: Minor coding convention fixup drivers/block/umem: use DRIVER_NAME where appropriate drivers/block/umem: trim trailing whitespace drivers/block/umem: minor cleanups drivers/block/umem: use dev_printk() drivers/block/umem: move private include away from include/linux Sysace: Labels in C code should not be indented. Sysace: Add of_platform_bus binding Sysace: Move IRQ handler registration to occur after FSM is initialized Sysace: minor rework and cleanup changes ...
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Fix random segfault with preemption [AVR32] Don't use __builtin_xchg() [AVR32] ngw100 i2c-gpio tweaks [AVR32] Ignore a few irrelevant syscalls [AVR32] SMC configuration in clock cycles [AVR32] Drop support for redundant "keepinitrd" boot-time parm. [AVR32] Make dma_sync_*_for_cpu no-ops [AVR32] Remove unneeded 8K alignment of .text section [AVR32] Kill a few hardcoded constants in vmlinux.lds [AVR32] rename vmlinux.lds [AVR32] fix command line parsing in early_parse_fbmem [AVR32] checkstack support [AVR32] Wire up USBA device [AVR32] add multidrive support for pio driver [AVR32] /sys/kernel/debug/at32ap_clk [AVR32] Move AT32_PM_BASE definition into pm.h
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (74 commits) Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230 blackfin enable arbitary speed serial setting Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START Blackfin arch: fix typo in register name Blackfin arch: trim the Blackfin arch MAINTAINERS list Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin Blackfin arch: Export strcpy - occasionally get module link failures otherwise Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281 Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy Blackfin arch: update kgdb patch Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 Blackfin arch: Print out debug info, as early as possible Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out Blackfin arch: fix endless loop bug when a double fault happens Blackfin arch: Initial patch to add earlyprintk support Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files, use the new REGBASE for board platform resources Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs Blackfin arch: add more common defines for output sections Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches ...
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (310 commits) V4L/DVB (6316): Change list_for_each+list_entry to list_for_each_entry V4L/DVB (6315): pvrusb2: Change list_for_each+list_entry to list_for_each_entry V4L/DVB (6314): saa7134: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6313): ivtv: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6312): cx88: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6311): dvb: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6308): V4L: zc0301, remove bad usage of ERESTARTSYS V4L/DVB (6307): V4L: w9968cf, remove bad usage of ERESTARTSYS V4L/DVB (6306): Few clenups for saa7134 resume code V4L/DVB (6305): V4L: videobuf-core.c avoid NULL dereferences in videobuf-core V4L/DVB (6301): pvrusb: Update DEBUGIFC sysfs to kernel 2.6.13+ V4L/DVB (6300): CodingStyle cleanup V4L/DVB (6299): dvb: Add dependencies for VIDEOBUF_DVB V4L/DVB (6297): cx23885: remove wrong Kconfig selection of VIDEOBUF V4L/DVB (6296): dib0700: add support for AverMedia DVB-T Express card V4L/DVB (6295): saa7134: add autodetection for KWorld ATSC-115 V4L/DVB (6293): V4L: convert struct class_device to struct device V4L/DVB (6292): videobuf_core init always require callback implementation V4L/DVB (6291): Fix: avoid oops on some SMP machines V4L/DVB (6290): remove videobuf_set_pci_ops ...
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (67 commits) mmc: don't use weight32() pxamci: support arbitrary block size sdio: make the IRQ thread more resilient in the presence of bad states sdio: fix IRQ diagnostic message sdhci: remove old dma module params sdhci: add SDHCI_QUIRK_BROKEN_DMA quirk sdhci: remove DMA capability check from controller's PCI Class reg sdhci: fix a typo mmc: Disabler for Ricoh MMC controller sdio: adaptive interrupt polling mmc: pxamci: add SDIO card interrupt reporting capability mmc: pxamci: set proper buswidth capabilities according to PXA flavor mmc: pxamci: set proper block capabilities according to PXA flavor mmc: pxamci: better pending IRQ determination arm: i.MX/MX1 SDHC implements SD cards read-only switch read-back mmc: add led trigger mmc_spi host driver MMC core learns about SPI MMC/SD card driver learns SPI MMC headers learn about SPI ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 16:20:36 +0000