aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-02[PATCH] chelsio: whitespace cleanupStephen Hemminger
Whitespace cleanups. Replace leading spaces with tabs and fix indentation Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: remove leftover codeStephen Hemminger
The chelsio network driver has some extra ifdef's that got in because the driver was originally based on code that worked on 2.4 as well as 2.6. This patch removes the dead code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Adapt ucc_geth driver to use new of_platform_device supportKim Phillips
Include of_platform header, and use new of_[un]register_platform_driver() fns. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sundance: use NULL for pointerRandy Dunlap
Use NULL instead of 0 for pointers (cures sparse warnings). drivers/net/sundance.c:1106:16: warning: Using plain integer as NULL pointer drivers/net/sundance.c:1652:16: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: temp monitoring, newer firmware support, mm footprint reductionAmit S. Kale
NetXen: 1G/10G Ethernet Driver updates - Temparature monitoring and device control - Memory footprint reduction - Driver changes to support newer version of firmware Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 165 ++++++++++++++++++++++++++++++++-- netxen_nic_ethtool.c | 89 ++++++++++++------ netxen_nic_hdr.h | 71 +++++++++++++- netxen_nic_hw.c | 206 +++++++++++++++++++++++++++++-------------- netxen_nic_hw.h | 8 + netxen_nic_init.c | 239 +++++++++++++++++++++++++++++++++++++++++--------- netxen_nic_ioctl.h | 12 +- netxen_nic_isr.c | 54 +++++------ netxen_nic_main.c | 121 +++++++++++++++++-------- netxen_nic_niu.c | 172 +++++++++++++++++++++++++++-------- netxen_nic_phan_reg.h | 24 ++++- 11 files changed, 891 insertions(+), 270 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: Fixed /sys mapping between device and driverAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_main.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] softmac: reduce scan debug outputLarry Finger
When scanning in debug mode, softmac is very chatty in that it puts 3 lines in the logs for each time it scans. This patch has only one line containing all the information previously reported. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] ieee80211: Provide generic get_stats implementationDaniel Drake
bcm43xx and ipw2100 currently duplicate the same simplistic get_stats handler. Additionally, zd1211rw requires the same handler to fix a bug where all stats are reported as 0. This patch adds a generic implementation to the ieee80211 layer, which drivers are free to override. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Use softmac ERP handling functionalityDaniel Drake
This adds zd1211rw driver support for the softmac functionality I added a while back. We now obey changes in basic rates, use short preamble if it is available (but long if the AP says it's not), and send self-CTS in the proper situations. Locking fixed and improved by Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Rename cs_rate to zd_rateDaniel Drake
These controlset rate constants are also applicable in places outside the controlset, such as in the RTS/CTS control register. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Allow channels 1-13 in JapanDaniel Drake
Eric Goff found that he could not use his ZD1211 device which is programmed for the Japan regulatory domain. It turns out that ZyDAS deviate from the spec here: they do not use the newer Japan region code (0x41) but their drivers do operate as if the newer Japan legal frequency range is in effect. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Optimized handling of zero length entries in length infoUlrich Kunitz
There are a high number of split USB transactions, which contain only one packet but have a length info field. This patch optimizes this code by stopping parsing the length info structure if a zero length field is encountered. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: cleanupsUlrich Kunitz
Bit-field constants in zd_chip.h are now defined using a shift expression. The value 0x08 is now (1 << 3). The fix is intended to improve readability. Remove misleading comment in zd_mac.c: The function already returns -EPERM in managed mode (IW_MODE_INFRA). Remove unused code in zd_mac.c: The unused code intended for debugging rx_status values is no longer useful. Added dump_stack() to ZD_ASSERT macro: Output of the stack helps to debug assertions. Keep in mind that the ZD_ASSERT() macro only results in code, if DEBUG is defined. Improved comments for filter_rx() zd_usb.c: Added driver name to module init and exit functions Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Remove IW_FREQ_AUTO supportDaniel Drake
http://bugzilla.kernel.org/show_bug.cgi?id=7399 zd1211rw's support for IW_FREQ_AUTO is broken: when specified, the driver tries to change to a channel specified in an uninitialized integer. As IW_FREQ_AUTO is hard to implement properly, the solution (at least for now) is to drop support for it and start ignoring the flags like all other wireless drivers do. This has the added advantage that kismet also starts working with zd1211rw, even though kismet requesting IW_FREQ_AUTO is also a bug (fixed in their svn) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] Check ieee80211softmac_auth_resp kmalloc resultArnaldo Carvalho de Melo
And use kmemdup and kzalloc where applicable Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Belkin F5D7050 v4000Daniel Drake
zd1211b chip 050d:705c v4810 high 00-17-3f AL2230_RF pa0 g--N Tested by Bryan Barnard Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Planex GW-US54MiniDaniel Drake
zd1211 chip 14ea:ab13 v4330 high 00-90-cc AL2230_RF pa0 g--- Tested by Tetsuya Yatagai. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: correct overly aggressive check of return from pci_set_mwiJohn W. Linville
Failure of pci_set_mwi should not be considered a fatal error. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: correct "Move IV/ICV stripping into ieee80211_rx"Larry Finger
In the patch sent by Daniel Drake under the title "[PATCH] ieee80211: Move IV/ICV stripping into ieee80211_rx", a needed line was accidentally removed. (NOTE: I'm pretty sure this was my fault, not Daniel's. -- JWL) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02Revert "[PATCH] Add support for Marvell 88e1111S and 88e1145"Jeff Garzik
This reverts commit 477c517903d57047150b01608149e02c6e9d83dd. This patch depended on something that was not yet committed.
2006-12-02[PATCH] Atmel MACB ethernet driverHaavard Skinnemoen
Driver for the Atmel MACB on-chip ethernet module. Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works with AT91SAM9260 as well, and it may be possible to share some code with the at91_ether driver for AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since previous version: * Probe for PHY ID instead of depending on it being provided through platform_data. * Grab initial ethernet address from the MACB registers instead of depending on platform_data. * Set MII/RMII mode correctly. These changes are mostly about making the driver more compatible with the at91 infrastructure. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] WAN: DSCC4 driver requires generic HDLCKrzysztof Halasa
Another thing, reported recently to me by several people - DSCC4 WAN driver now (and perhaps for the last couple of years+) requires the generic HDLC. I've fixed the Kconfig and moved the DSCC4 option under CONFIG_HDLC so it's consistent visually. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Add tsi108/9 On Chip Ethernet device driver supportZang Roy-r61911
Add tsi108/9 on chip Ethernet controller driver support. The driver code collects the feedback of previous posting form the mailing list and gives the update. MPC7448HPC2 platform in arch/powerpc uses tsi108 bridge. The following is a brief description of the Ethernet controller: The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent Gigabit Ethernet ports,E0 and E1. It uses a single Management interface to manage the two physical connection devices (PHYs). Each Ethernet port has its own statistics monitor that tracks and reports key interface statistics. Each port supports a 256-entry hash table for address filtering. In addition, each port is bridged to the Switch Fabric through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. Each Ethernet port also has a pair of internal Ethernet DMA channels to support the transmit and receive data flows. The Ethernet DMA channels use descriptors set up in memory, the memory map of the device, and access via the Switch Fabric. The Ethernet Controller’s DMA arbiter handles arbitration for the Switch Fabric. The Controller also has a register bus interface for register accesses and status monitor control. The PMD (Physical Media Device) interface operates in MII, GMII, or TBI modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. The GMII and TBI modes are used to connect with Gigabit PMDs. Internal data flows to and from the Ethernet Controller through the Switch Fabric. Each Ethernet port uses its transmit and receive DMA channels to manage data flows through buffer descriptors that are predefined by the system (the descriptors can exist anywhere in the system memory map). These descriptors are data structures that point to buffers filled with data ready to transmit over Ethernet, or they point to empty buffers ready to receive data from Ethernet. Signed-off-by: Alexandre Bounine <Alexandre.Bounine@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sundance: solve host error problem in low performance embedded ↵Jesse Huang
system when continune down and up Solve host error problem in low performance embedded system when continune down and up. It will cause IP100A DMA TargetAbort. So we need more safe process to up and down IP100A with wait hardware completely stop and software cur_tx/ dirty_tx/cur_task/last_tx be clear. Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02e1000 linkage fixAndrew Morton
ia64: drivers/built-in.o(.text+0xd9a72): In function `e1000_xmit_frame': : undefined reference to `csum_ipv6_magic' Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Add support for Marvell 88e1111S and 88e1145Andy Fleming
This patch requires the new support for configurable PHY interfaces. Changes include: * New support for 88e1145 * New support for 88e111s * Fixing 88e1101 driver to not match non-88e1101 PHYs * Increases in feature support across Marvell PHY product line * Fixes a bunch of whitespace issues found by Lindent Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] add netpoll support for gianfar: respinVitaly Wool
The patch inlined below adds NET_POLL_CONTROLLER support for gianfar network driver, slightly modified wrt the comments from Andy Fleming. drivers/net/gianfar.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] wireless: clean-up some "check return code" warningsJohn W. Linville
Clean-up some warnings from missing return code checks, mostly from calling pci_enable_device during a PCI resume. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] ieee80211softmac: fix verbosity when debug disabledLarry Finger
SoftMAC contains a number of debug-type messages that continue to print even when debugging is turned off. This patch substitutes dprintkl for printkl for those lines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: Remove useless core enable/disable messagesLarry Finger
In the softmac version of bcm43xx, the core scan logs whether each core is enabled or disabled. This information is useless as one of the next steps is to enable all cores. This patch removes this output from the log. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: remove badness variable and related routineLarry Finger
When the periodic work function in bcm43xx was converted for voluntary preemption to reduce latency, a new function was created to estimate the "badness" of each step, and this quantity was used to determine if preemption should be enabled when periodic work was undertaken. This concept was quite useful while debugging of periodic work was in progress. Now that this routine seems to be working correctly, it is time to simplify the code. This patch keeps the functionality intact, but simplifies the code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[netdrvr] netxen: build fixesJeff Garzik
Most contributed and Signed-off-by: Andrew Morton <akpm@osdl.org> with some from me as well. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sundance: correct initial and close hardware step.Jesse Huang
Correct initial and close hardware step. In some embedded system down and up IP100A will cause DMA crash. We add some for safe down and up IP100A. Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Fixed a number of bugs in the PHY LayerAndy Fleming
* genphy_update_link is now exported * Added a fix from ncase@xes-inc.com which changes forcing so it only updates the link. Otherwise, it never tries the lower values, since it is always overwriting the speed/duplex values with the current ones, rather than the intended ones. * Fixed a bug where bringing up a PHY with no link caused it to timeout, and enter forcing mode. Once in forcing mode, plugging in the link didn't autonegotiate. Now the AN state detects the lack of link, and enters the NO_LINK state. AN only times out if the link is up and AN fails * Cleaned up the PHY_AN case, reducing one level of indentation for the timeout code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] subdance: fix TX Pause bug (reset_tx, intr_handler)Jesse Huang
Fix TX Pause bug (reset_tx, intr_handler). When MaxCollisions occurred, need to re-enable Tx. But just after re-enable, MaxCollisions maybe occurred again and with TxStatusOverflow. This will cause driver can't check new MaxCollisions to re-enable Tx again, because TxStatusOverflow. For this reason, after re-enable Tx, we need to make sure Tx was actually enabled. Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sundance: remove TxStartThresh and RxEarlyThreshJesse Huang
For patent issue need to remove TxStartThresh and RxEarlyThresh. This patent is cut-through patent. If use this function, Tx will start to transmit after few data be move in to Tx FIFO. We are not allow to use those function in DFE530/DFE550/DFE580/DL10050/IP100/IP100A. It will decrease a little performance. Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] network: pcnet_cs: remove the code to change the E8390_CMD register ↵Komuro
from ei_watchdog() Remove the code to change the E8390_CMD register from ei_watchdog(). The 8390-page is always 0 outside the spin_lock. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] forcedeth: add support for new mcp67 deviceAyaz Abdulla
Add support for the new mcp67 device into forcedeth. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] forcedeth: add new NVIDIA pci idsAyaz Abdulla
Add pci device ids for the NVIDIA MCP67 chip. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] forcedeth: add recoverable error supportAyaz Abdulla
This patch adds support to recover from a previously fatal MAC error. In the past the MAC would be hung on an internal fatal error. On new chipsets, the MAC has the ability to enter a non-fatal state and allow the driver to re-init it. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] forcedeth: add mgmt unit supportAyaz Abdulla
This patch adds support for the mgmt unit in certain chipsets. The MAC and the mgmt unit share the PHY and therefore proper intialization procedures are needed for them to maintain coexistense. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] defxx: Big-endian hosts supportMaciej W. Rozycki
The PDQ DMA engine requires a different byte-swapping mode for big-endian hosts; also the MAC address which is read from a register through PIO has to be byte-swapped. These changes have been verified with DEFPA-DC (PCI) boards and a Broadcom BCM91250A (MIPS CPU based) host. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] kmemdup() cleanup in drivers/netEric Sesterhenn
hi, replace open coded kmemdup() to save some screen space, and allow inlining/not inlining to be triggered by gcc. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02r8169: perform a PHY reset before any other operation at boot timeFrancois Romieu
Realtek's 8139/810x (0x8136) PCI-E comes with a touchy PHY. A big heavy reset seems to calm it down. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7378. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
2006-12-02e1000: update README for e1000Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: increment version to 7.3.15-k2Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: add dynamic itr modesJesse Brandeburg
Add a new dynamic itr algorithm, with 2 modes, and make it the default operation mode. This greatly reduces latency and increases small packet performance, at the "cost" of some CPU utilization. Bulk traffic throughput is unaffected. The driver can limit the amount of interrupts per second that the adapter will generate for incoming packets. It does this by writing a value to the adapter that is based on the maximum amount of interrupts that the adapter will generate per second. Setting InterruptThrottleRate to a value greater or equal to 100 will program the adapter to send out a maximum of that many interrupts per second, even if more packets have come in. This reduces interrupt load on the system and can lower CPU utilization under heavy load, but will increase latency as packets are not processed as quickly. The default behaviour of the driver previously assumed a static InterruptThrottleRate value of 8000, providing a good fallback value for all traffic types,but lacking in small packet performance and latency. The hardware can handle many more small packets per second however, and for this reason an adaptive interrupt moderation algorithm was implemented. Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which it dynamically adjusts the InterruptThrottleRate value based on the traffic that it receives. After determining the type of incoming traffic in the last timeframe, it will adjust the InterruptThrottleRate to an appropriate value for that traffic. The algorithm classifies the incoming traffic every interval into classes. Once the class is determined, the InterruptThrottleRate value is adjusted to suit that traffic type the best. There are three classes defined: "Bulk traffic", for large amounts of packets of normal size; "Low latency", for small amounts of traffic and/or a significant percentage of small packets; and "Lowest latency", for almost completely small packets or minimal traffic. In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 for traffic that falls in class "Bulk traffic". If traffic falls in the "Low latency" or "Lowest latency" class, the InterruptThrottleRate is increased stepwise to 20000. This default mode is suitable for most applications. For situations where low latency is vital such as cluster or grid computing, the algorithm can reduce latency even more when InterruptThrottleRate is set to mode 1. In this mode, which operates the same as mode 3, the InterruptThrottleRate will be increased stepwise to 70000 for traffic in class "Lowest latency". Setting InterruptThrottleRate to 0 turns off any interrupt moderation and may improve small packet latency, but is generally not suitable for bulk throughput traffic. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Rick Jones <rick.jones2@hp.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: add dynamic generic MSI interrupt routineJesse Brandeburg
Add a generic MSI interrupt routine that is IO read-free, speeding up MSI interrupt handling. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: reorder e1000_param.cAuke Kok
This file needs some cleanups and reordering - logically order it so that relevant defines and code are together with properly quoted defaults. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: Only set IDE for tx when we are using TIDV/TADVJesse Brandeburg
Spec fix: don't set IDE unless we are actually setting the tx int delay time. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 18:02:37 +0000