aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-11-29gigaset: get rid of info() and warn() macrosTilman Schmidt
Join the move away from the obsolete info() macro, opencoding the remaining uses. While we're at it, also get rid of the warn() macro by promoting the three remaining uses to err(). Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29gigaset: remove unnecessary poll methodTilman Schmidt
The N_GIGASET_M101 line discipline implemented by the ser_gigaset driver does not transfer any data from/to userspace through the tty interface. Therefore a poll method is not needed. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28cxgb3: Fix sparse warning and micro-optimize is_pure_response()Roland Dreier
The function is_pure_response() does "ntohl(var) & const" and then essentially just tests whether the result is 0 or not; this can be done more efficiently by computing "var & htonl(const)" instead and doing the byte swap at compile time instead of run time. This change slightly shrinks the compiled code; eg on x86-64 we save a couple of bswapl instructions: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8) function old new delta t3_sge_intr_msix_napi 544 536 -8 and this also has the pleasant side effect of fixing a sparse warning: drivers/net/cxgb3/sge.c:2313:15: warning: restricted degrades to integer Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: add the ST ste10Xp PHYsGiuseppe Cavallaro
This patch adds the STMicroelectronics ste10xp PHY device driver. It supports both the ste100p and the ste101p devices. Suspend/resume alredy added. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: Add file missed in previous commit.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: power management supportGiuseppe Cavallaro
This patch adds the power management support into the physical abstraction layer. Suspend and resume functions respectively turns on/off the bit 11 into the PHY Basic mode control register. Generic PHY device starts supporting PM. In order to support the wake-on LAN and avoid to put in power down the PHY device, the MDIO is aware of what the Ethernet device wants to do. Voluntary, no CONFIG_PM defines were added into the sources. Also generic suspend/resume functions are exported to allow other drivers use them (such as genphy_config_aneg etc.). Within the phy_driver_register function, we need to remove the memset. It overrides the device driver owner and it is not good. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: add natsemi PHY driverGiuseppe Cavallaro
This patch adds the PHY device driver for the National Semiconductor DP83865 Gig PHYTER. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28ne2: silence static never defined warningsIlpo Järvinen
These warning originate from 50014f1 (ne2: convert to net_device_ops) which did drop those functions. drivers/net/ne2.c:140: warning: 'ne_open' declared 'static' but never defined drivers/net/ne2.c:141: warning: 'ne_close' declared 'static' but never defined Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28bnx2: use net_device_stats nowadays available in net_deviceIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28niu: use net_device_stats nowadays available in net_deviceIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28pkt_sched: fix sparse warningHannes Eder
Impact: make global function static Fix the following sparse warning: net/sched/sch_api.c:192:14: warning: symbol 'qdisc_match_from_root' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28netlink: allow empty nested attributesPatrick McHardy
validate_nla() currently doesn't allow empty nested attributes. This makes userspace code unnecessarily complicated when starting and ending the nested attribute is done by generic upper level code and the inner attributes are dumped by a module. Add a special case to accept empty nested attributes. When the nested attribute is non empty, the same checks as before are performed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 Conflicts: net/netfilter/nf_conntrack_netlink.c
2008-11-27decnet: compile fix for removal of byteorder wrapperHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgbe: section fixesAl Viro
ixgbe_init_interrupt_scheme() is called from ixgbe_resume(). Build that with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem. Several helpers called by it also are misannotated __devinit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27sctp: fix missing label when PROC_FS=nRandy Dunlap
Fix missing label when CONFIG_PROC_FS=n: net/sctp/protocol.c: In function 'sctp_proc_init': net/sctp/protocol.c:106: error: label 'out_nomem' used but not defined make[3]: *** [net/sctp/protocol.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27igb: Add support for pci-e Advanced Error ReportingAlexander Duyck
Add the calls necessary to enable advanced error reporting for igb on systems with AER enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27e100: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgb: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27e1000: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgbe: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27igb: link up/down messages must follow a specific formatAlexander Duyck
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27decnet: remove private wrappers of endian helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
2008-11-26cxgb3: Update FW loading path.Divy Le Ray
Update FW loading path to accomodate in-kernel images location Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26cxgb3: integrate FW and protocol engines in the kernelDivy Le Ray
Include firmware and protocol images in the kernel image if requested Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26cxgb3: avoid potential memory leak.Divy Le Ray
Add consistency in alloc_ring() parameter checking to avoid potential memory leaks. alloc_ring() callers are correct fo far. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26cxgb3: set hard_xmit in the netdev_opsDivy Le Ray
Fix t3_eth_xmit() missing into the netdev_ops structure. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-11-26pkt_sched: gen_estimator: Optimize gen_estimator_active()Jarek Poplawski
Since all other gen_estimator functions use bstats and rate_est params together, and searching for them is optimized now, let's use this also in gen_estimator_active(). The return type of gen_estimator_active() is changed to bool, and gen_find_node() parameters to const, btw. In tcf_act_police_locate() a check for ACT_P_CREATED is added before calling gen_estimator_active(). Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26mac80211_hwsim: fix-up some print_mac merge damageJohn W. Linville
Some print_mac -> %pM conversions got lost in some merge or another... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: fix unaligned access in ieee80211_wep_encrypt_dataIvan Kuten
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26p54: fix wmm queue settingsChristian Lamparter
This patch fixes a regression (introduced by "p54: more definitions form lmac_longbow.h and pda.h") It turned out that the "ret" variable wasn't initialized and this caused the following warnings/errors to appear: wmaster1: failed to set TX queue parameters for queue 2 wmaster1: failed to set TX queue parameters for queue 3 wmaster1: failed to set TX queue parameters for queue 1 wmaster1: failed to set TX queue parameters for queue 0 Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use proper TX channel width for setting channelsSujith
The TX channel width of the BSS can be obtained only after association. In all cases, default to HT20 if HT is enabled, and set chan width to HT40 only if the BSS supports it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Code scrubSujith
Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26nl80211: Change max TX power to be in mBm instead of dBmJouni Malinen
In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP, change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead of dBm and U8. This is a userspace interface change, but the previous version had not yet been pushed upstream and there are no userspace programs using this yet, so there is justification to get this change in as long as it goes in before the previous version gets out. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Provide option to avoid unnecessary fw cachingDavid Kilroy
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Resume spectrum_cs in the same way as orinoco_csDavid Kilroy
Retrieval of external firmware has been resolved, and should work with the standard orinoco resume algorithm. This fixes an issue where priv->hw_unavailable indicates the card is ready when firmware has not been loaded. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Cache Symbol firmwareDavid Kilroy
Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Separate fw caching from downloadDavid Kilroy
This refactorring will make it easier to share logic with Symbol firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Handle -ENOMEM on RX gracefullyLuis R. Rodriguez
We would get an oops on RX on -ENOMEM by passing NULL to the hardware on ath_rx_buf_link(). The oops would look something like this: ath_rx_tasklet+0x515/0x53b ath9k_tasklet+0x48 tasklet_action __do_softirq irq_exit do_IRQ RIP: ath_rx_buf_link+0x3a We correct this by handling the requeue directly on the ath_rx_tasklet() and trying to allocate an skb *prior* to sending up the last hardware processed skb. If we run out of memory this gauranteees we have skbs to work with while it simply drops new received frames. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26rfkill: always call get_state() hook on resumeHenrique de Moraes Holschuh
We "optimize" away the get_state() hook call on rfkill_toggle_radio when doing a forced state change. This means the resume path is not calling get_state() as it should. Call it manually on the resume handler, as we don't want to mess with the EPO path by removing the optimization. This has the added benefit of making it explicit that rfkill->state could have been modified before we hit the rfkill_toggle_radio() call in the class resume handler. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26rfkill: preserve state across suspendHenrique de Moraes Holschuh
The rfkill class API requires that the driver connected to a class call rfkill_force_state() on resume to update the real state of the rfkill controller, OR that it provides a get_state() hook. This means there is potentially a hidden call in the resume code flow that changes rfkill->state (i.e. rfkill_force_state()), so the previous state of the transmitter was being lost. The simplest and most future-proof way to fix this is to explicitly store the pre-sleep state on the rfkill structure, and restore from that on resume. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: Look out for some other AP when disassoc is received.Vivek Natarajan
When a disassoc packet is received from the AP with a reason code of 'leaving the BSS', mac80211 should go into DISABLED state just as it would do if the AP suddenly went away for some reason, as that is what will happen shortly after the AP leaves anyway. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26nl80211: Report max TX power in NL80211_BAND_ATTR_FREQSJouni Malinen
This is useful information to provide for userspace (e.g., hostapd needs this to generate Country IE). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath5k: Clean up eeprom parsing and add missing calibration dataFelix Fietkau
This patch brings the ath5k eeprom parsing code in sync with the work done on ath_info by Nick Kossifidis and integrates the missing parts based on the code of the Atheros Legacy HAL release. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Dont update rate control for every AMPDUVasanthakumar Thiagarajan
Update the rate control only with the tx status of first AMPDU of an aggregation. This patch fixes frequent drops in throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: TX update chicken bitsWinkler, Tomas
This instructs FH to increment the retry count of a packet when it is brought from the memory to TX-FIFO to save transactions during aggregation flow. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: TX setup fix confusion between TX queue and TX DMA channelWinkler, Tomas
This patch configures correctly TX DMA channel. It is not the same as TX queue. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: 4965 define firmware file name onceWinkler, Tomas
Apply same idiom as in 5000 introduced by 'iwlwifi: define firmware file name once' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 04:09:05 +0000