aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-02-27cfg80211: pass the regulatory_request struct in __regulatory_hint()Luis R. Rodriguez
We were passing value by value, lets just pass the struct. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: make __regulatory_hint() staticLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: follow beacon hints on reg_notifier when world roamingLuis R. Rodriguez
If we are roaming we allow to follow beacon hints. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: Add AP beacon regulatory hintsLuis R. Rodriguez
When devices are world roaming they cannot beacon or do active scan on 5 GHz or on channels 12, 13 and 14 on the 2 GHz band. Although we have a good regulatory API some cards may _always_ world roam, this is also true when a system does not have CRDA present. Devices doing world roaming can still passive scan, if they find a beacon from an AP on one of the world roaming frequencies we make the assumption we can do the same and we also remove the passive scan requirement. This adds support for providing beacon regulatory hints based on scans. This works for devices that do either hardware or software scanning. If a channel has not yet been marked as having had a beacon present on it we queue the beacon hint processing into the workqueue. All wireless devices will benefit from beacon regulatory hints from any wireless device on a system including new devices connected to the system at a later time. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: enable 5 GHz world roaming channelsLuis R. Rodriguez
The current static world regulatory domain is too restrictive, we can use some 5 GHz channels world wide so long as they do not touch frequencies which require DFS. The compromise is we must also enforce passive scanning and disallow usage of a mode of operation that beacons: (AP | IBSS | Mesh) Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: enable active-scan / beaconing on Ch 1-11 for world regdomLuis R. Rodriguez
This enables active scan and beaconing on Channels 1 through 11 on the static world regulatory domain. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: rename regdom_changed to regdom_changes() and use itLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: allow drivers that agree on regulatory to agreeLuis R. Rodriguez
This allows drivers that agree on regulatory to share their regulatory domain. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: comments style cleanupLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: move all regulatory hints to workqueueLuis R. Rodriguez
All regulatory hints (core, driver, userspace and 11d) are now processed in a workqueue. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: free rd on unlikely event on 11d hintLuis R. Rodriguez
This was never happening but it was still wrong, so correct it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: remove likely from an 11d hint caseLuis R. Rodriguez
Truth of the matter this was confusing people so mark it as unlikely as that is the case now. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: protect first access of last_request on 11d hint under mutexLuis R. Rodriguez
We were not protecting last_request there is a small possible race between an 11d hint and another routine which calls reset_regdomains() which can prevent a valid country IE from being processed. This is not critical as it will still be procesed soon after but locking prior to it is correct. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: make regulatory_request use wiphy_idx instead of wiphyLuis R. Rodriguez
We do this so later on we can move the pending requests onto a workqueue. By using the wiphy_idx instead of the wiphy we can later easily check if the wiphy has disappeared or not. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: add assert_cfg80211_lock() to ensure proper protectionLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: propagate -ENOMEM during regulatory_init()Luis R. Rodriguez
Calling kobject_uevent_env() can fail mainly due to out of memory conditions. We do not want to continue during such conditions so propagate that as well instead of letting cfg80211 load as if everything is peachy. Additionally lets clarify that when CRDA is not called during cfg80211's initialization _and_ if the error is not an -ENOMEM its because kobject_uevent_env() failed to call CRDA, not because CRDA failed. For those who want to find out why we also let you do so by enabling the kernel config CONFIG_CFG80211_REG_DEBUG -- you'll get an actual stack trace. So for now we'll treat non -ENOMEM kobject_uevent_env() failures as non fatal during cfg80211's initialization. CC: Greg KH <greg@kroah.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: add regulatory_hint_core() to separate the core reg hintLuis R. Rodriguez
This makes the core hint path more readable and allows for us to later make it obvious under what circumstances we need locking or not. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27nl80211: disallow user requests prior to regulatory_init()Luis R. Rodriguez
If cfg80211 is built into the kernel there is perhaps a small time window betwen nl80211_init() and regulatory_init() where cfg80211_regdomain hasn't yet been initialized to let the wireless core do its work. During that rare case and time frame (if its even possible) we don't allow user regulatory changes as cfg80211 is working on enabling its first regulatory domain. To check for cfg80211_regdomain we now contend the entire operation using the cfg80211_mutex. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: rename cfg80211_drv_mutex to cfg80211_mutexLuis R. Rodriguez
cfg80211_drv_mutex is protecting more than the driver list, this renames it and documents what its currently supposed to protect. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: add wiphy_idx_valid to check for wiphy_idx sanityLuis R. Rodriguez
This will later be used by others, for now make use of it in cfg80211_drv_by_wiphy_idx() to return early if an invalid wiphy_idx has been provided. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: rename cfg80211_registered_device's idx to wiphy_idxLuis R. Rodriguez
Makes it clearer to read when comparing to ifidx Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Introduce a generic commit() to apply changesAlina Friedrichsen
This patch introduces a generic commit() function which initiate a new network joining process. It should be called after some interface config changes, so that the changes get applied more cleanly. Currently set_ssid() and set_bssid() call it. Others can be added in future patches. In version 1 the header files was forgotten, sorry. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_radio_maskset()Michael Buesch
This patch converts code to use the new b43_radio_maskset() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask, set; @@ -b43_radio_write16(dev, addr, (b43_radio_read16(dev, addr) & mask) | set); +b43_radio_maskset(dev, addr, mask, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_radio_mask()Michael Buesch
This patch converts code to use the new b43_radio_mask() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask; @@ -b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) & mask); +b43_radio_mask(dev, addr, mask); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_radio_set()Michael Buesch
This patch converts code to use the new b43_radio_set() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, set; @@ -b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) | set); +b43_radio_set(dev, addr, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_phy_maskset()Michael Buesch
This patch converts code to use the new b43_phy_maskset() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask, set; @@ -b43_phy_write(dev, addr, (b43_phy_read(dev, addr) & mask) | set); +b43_phy_maskset(dev, addr, mask, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_phy_mask()Michael Buesch
This patch converts code to use the new b43_phy_mask() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask; @@ -b43_phy_write(dev, addr, b43_phy_read(dev, addr) & mask); +b43_phy_mask(dev, addr, mask); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_phy_set()Michael Buesch
This patch converts code to use the new b43_phy_set() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, set; @@ -b43_phy_write(dev, addr, b43_phy_read(dev, addr) | set); +b43_phy_set(dev, addr, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27libertas: use private SDIO workqueue to avoid scheduling latencyDan Williams
The libertas SDIO interface scheduled the packet worker, resulting in unwanted latency for every data packet or command sent to the firmware. Fix a bug on the SDIO probe error path too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Implement sw scan callbacksMichael Buesch
This implements the new sw scan callbacks in b43. They are currently used to turn CFP update in the microcode off while scanning. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Add software scan notifiersMichael Buesch
This adds optional notifier functions for software scan. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Enable PCI slow clock workaround, if needed.Michael Buesch
Enable the PCI slow clock workaround, if we're running a PCI core rev <= 10. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Honor the no-slow-clock boardflagMichael Buesch
Do not turn off the crystal, if the boardflags tell us so. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Fix radio host flagsMichael Buesch
This fixes initialization of some radio related hostflags. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Add slot count compiletime assertionMichael Buesch
This adds a compiletime assertion for a recently introduced assumption on the slot counts. The tx header cache handling code assumes that the TX slot count can be divided evenly by the number of TX slots per frame. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Add appropriate ANI values for AP modeSujith
The short calibration interval is different for AP mode, fix this. Also, the timer should be rearmed in the calibration routine during scanning. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix PCI shutdown sequenceSujith
pci_release_region() has to be called after the device has been disabled. Also remove a stray __init attribute. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix bug in EEPROM chainmask retrievalSujith
Using wrong chainmasks would have an adverse impact on performance. This patch fixes chainmask retrieval for non-PCIE cards. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Add PER to RC debug statisticsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Remove multiple macro occurrencesSujith
OLC_FOR_AR9280_20_LATER is defined in multiple places, move it to a common location. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Don't reset TSF after scanning automaticallyAlina Friedrichsen
Reset automatically the TSF on re-enabling beaconing after scanning in IBSS mode causes several problems. For example a new created IBSS network can't age before an other node has joined, because scans are done automatically in that case. And several other strange bugs more... The TSF reset is done manually in the higher level mac80211 code in the cases were it's needed, so we don't need to do it here. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Optimize DMA buffersMichael Buesch
In the old days we used one slot per frame. But when we changed that to 2, we didn't raise the overall slot count. Which resulted in an effective division of two to the number of slots. Double the number of TX slots, so we have an effective hardware queue of 128 frames per QoS queue. Also optimize the TX header cache handling. We don't need a cached TX header for slots that will never carry an actual header. So we reduce the memory consumption of the cache by 50%. So as a net result we end up with more or less the same memory usage before and after this patch (except a few tiny meta structures), but have twice the number of TX slots available. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Fix DMA buffer size handlingMichael Buesch
This fixes hidden bugs in the size handling of the DMA buffers. This sets the RX buffer size to the theoretical max packet size and fixes passing of the size values to the device (must not subtract the header offset). These bugs are hidden and don't actually trigger due to the magic +100 offset for the buffer size. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Move DMA stop sanity checkMichael Buesch
Move the DMA stop sanity check up a few lines, so it's actually theoretically possible to trigger. (But it still shouldn't trigger, of course). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Filter out beacons from other BSS in STA modeVasanthakumar Thiagarajan
Passing beacons received from other BSS to s/w in non-scanning state is unnecessary in STA mode. This patch filters them out in h/w. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlwifi: dma mapping read and write changesFenghua Yu
When iwlwifi runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlwifi driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlwifi device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The iwl TX command contains a scratch field that is updated by uCode to indicate retry counts. For 5000 series the patch is required also for regular frames, but this patch does not differenciate. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use SW rfkill from iwlwifiAbhijeet Kolekar
Patch unifies use of SW rfkill between 3945 and agn driver. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_isrAbhijeet Kolekar
iwl3945 uses iwl_isr and deletes duplicated iwl3945_isr. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: remove duplicate interrupt codeAbhijeet Kolekar
Patch removes duplicate code to enable and disable interrupt. iwl3945 now uses iwlwifi's functions. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_rx_reply_error notificationAbhijeet Kolekar
Patch removes duplicate code from iwl3945 and uses iwl_rx_reply_error and spectrum notifications from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:29:02 +0000