aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-10powerpc/QE: implement support for the GPIO LIB APIAnton Vorontsov
This is needed to access QE GPIOs via Linux GPIO API. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/QE: prepare QE PIO code for GPIO LIB supportAnton Vorontsov
- split and export __par_io_config_pin() out of par_io_config_pin(), so we could use the prefixed version with GPIO LIB API; - rename struct port_regs to qe_pio_regs, and place it into qe.h; - rename #define NUM_OF_PINS to QE_PIO_PINS, and place it into qe.h. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/QE: add support for QE USB clocks routingAnton Vorontsov
This patch adds a function to the qe_lib to setup QE USB clocks routing. To setup clocks safely, cmxgcr register needs locking, so I just reused ucc_lock since it was used only to protect cmxgcr. The idea behind placing clocks routing functions into the qe_lib is that later we'll hopefully switch to the generic Linux Clock API, thus, for example, FHCI driver may be used for QE and CPM chips without nasty #ifdefs. This patch also fixes QE_USB_RESTART_TX command definition in the qe.h. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/sysdev: implement FSL GTM supportAnton Vorontsov
GTM stands for General-purpose Timers Module and able to generate timer{1,2,3,4} interrupts. These timers are used by the drivers that need time precise interrupts (like for USB transactions scheduling for the Freescale USB Host controller as found in some QE and CPM chips), or these timers could be used as wakeup events from the CPU deep-sleep mode. Things unimplemented: 1. Cascaded (32 bit) timers (1-2, 3-4). This is straightforward to implement when needed, two timers should be marked as "requested" and configured as appropriate. 2. Super-cascaded (64 bit) timers (1-2-3-4). This is also straightforward to implement when needed, all timers should be marked as "requested" and configured as appropriate. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: add local bus nodes for Flash and CAN to tqm8560.dtsWolfgang Grandegger
This patch adds local bus nodes for Flash and CAN to the DTS file of the TQM8560 module (tqm8560.dts). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: support for the TQM8548 module using the big FlashWolfgang Grandegger
Some TQM85xx boards could be equipped with up to 1 GiB (NOR) flash memory and therefore a modified memory map is required and setup by the board loader. This patch adds an appropriate DTS file. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: add board support for the TQM8548 modulesWolfgang Grandegger
This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: correct vendor prefix in DTS files for TQM85xx modulesWolfgang Grandegger
Like for the TQM5200, the vendor prefix "tqc," is now used for all TQM85xx modules from TQ-Components GmbH (http://www.tqc.de) in the corresponding DTS files. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc: Remove arch/ppc and include/asm-ppcPaul Mackerras
All the maintained platforms are now in arch/powerpc, so the old arch/ppc stuff can now go away. Acked-by: Adrian Bunk <bunk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Jon Loeliger <jdl@freescale.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Improve (in|out)_[bl]eXX() asm codeTrent Piepho
Since commit 4cb3cee03d558fd457cb58f56c80a2a09a66110c the code generated for the in_beXX() and out_beXX() mmio functions has been sub-optimal. The out_leXX() family of functions are created with the macro DEF_MMIO_OUT_LE() while the out_beXX() family are created with DEF_MMIO_OUT_BE(). In what was perhaps a bit too much macro use, both of these macros are in turn created via the macro DEF_MMIO_OUT(). For the LE versions, eventually they boil down to an asm that will look something like this: asm("sync; stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); The issue is that the "stwbrx" instruction only comes in an indexed, or 'x', version, in which the address is represented by the sum of two registers (the "0,%2"). Unfortunately, gcc doesn't have a constraint for an indexed memory reference. The "m" constraint allows both indexed and offset, i.e. register plus constant, memory references and there is no "stwbr" version for offset references. "m" also allows updating addresses and there is no 'u' version of "stwbrx" like there is with "stwux". The unused first operand to the asm is just to tell gcc that *addr is an output of the asm. The address used is passed in a single register via the third asm operand, and the index register is just hard coded as 0. This means gcc is forced to put the address in a single register and can't use index addressing, e.g. if one has the data in register 9, a base address in register 3 and an index in register 4, gcc must emit code like "add 11,4,3; stwbrx 9,0,11" instead of just "stwbrx 9,4,3". This costs an extra add instruction and another register. For gcc 4.0 and older, there doesn't appear to be anything that can be done. But for 4.1 and newer, there is a 'Z' constraint. It does not allow "updating" addresses, but does allow both indexed and offset addresses. However, the only allowed constant offset is 0. We can then use the undocumented 'y' operand modifier, which causes gcc to convert "0(reg)" into the equivilient "0,reg" format that can be used with stwbrx. This brings us the to problem with the BE version. In this case, the "stw" instruction does have both indexed and non-indexed versions. The final asm ends up looking like this: asm("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val), "r" (addr)); The undocumented codes "%U0" and "%0X" will generate a 'u' if the memory reference should be an auto-updating one, and an 'x' if the memory reference is indexed, respectively. The third operand is unused, it's just there because asm the code is reused from the LE version. However, gcc does not know this, and generates unnecessary code to stick addr in a register! To use the example from the LE version, gcc will generate "add 11,4,3; stwx 9,4,3". It is able to use the indexed address "4,3" for the "stwx", but still thinks it needs to put 4+3 into register 11, which will never be used. This also ends up happening a lot for the offset addressing mode, where common code like this: out_be32(&device_registers->some_register, data); uses an instruction like "stw 9, 42(3)", where register 3 has the pointer device_registers and 42 is the offset of some_register in that structure. gcc will be forced to generate the unnecessary instruction "addi 11, 3, 42" to put the address into a single (unused) register. The in_* versions end up having these exact same problems as well. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Andreas Schwab <schwab@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Fix irq_alloc_host() reference counting and callersMichael Ellerman
When I changed irq_alloc_host() to take an of_node (52964f87c64e6c6ea671b5bf3030fb1494090a48: "Add an optional device_node pointer to the irq_host"), I botched the reference counting semantics. Stephen pointed out that it's irq_alloc_host()'s business if it needs to take an additional reference to the device_node, the caller shouldn't need to care. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Rework qe_ic_init() so we can avoid freeing the irq_hostMichael Ellerman
If we do the call to of_address_to_resource() first, then we don't need to worry about freeing the irq_host (which the code doesn't do currently anyway). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Rework ipic_init() so we can avoid freeing the irq_hostMichael Ellerman
If we do the call to of_address_to_resource() first, then we don't need to worry about freeing the irq_host (which the code doesn't do currently anyway). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Rework Axon MSI setup so we can avoid freeing the irq_hostMichael Ellerman
If we do the call to irq_of_parse_and_map() first, then we don't need to worry about freeing the irq_host. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Check that TASK_SIZE does not overlap KERNEL_STARTRune Torgersen
Make sure CONFIG_TASK_SIZE does not overlap CONFIG_KERNEL_START This could happen when overriding settings to get 1GB lowmem, and would lead to userland mysteriousely hanging. This setting is only used by PPC32. Signed-off-by: Rune Torgersen <runet@innovsys.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09platinumfb: Use linux/of_{device,platform}.h instead of asmStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09of_serial: Use linux/of_platform.h instead of asmStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Add the PC speaker only when requestedEmil Medve
This eliminates this minor boot-time debugging error message: [ 1.316451] calling add_pcspkr+0x0/0x84 [ 1.316478] initcall add_pcspkr+0x0/0x84 returned -19 after 0 msecs Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Add C2K to configurationRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 5 of 5: add the Kconfig entry for the C2K board. Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Default configuration for C2KRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 4 of 5: this is the default config for the board. In this configuration the kernel is going to try to boot from MTD partition 3 on the NOR flash (see c2k.dts for details about the partitioning of the flash). Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: C2K board driverRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 3 of 5: driver for the board. At this time it is very generic and similar to its original, the driver for the prpmc2800. Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: Boot code for the C2KRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 2 of 5: support for the board in arch/powerpc/boot. Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: DTS file for the C2KRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 1 of 5: DTS file describing the board peripherals. As far as I know all peripherals except the FPGA are listed in there (I did not include the FPGA because a lot of work is needed there). Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc/mpic: Fix ambiguous else statementAnton Vorontsov
This fixes the following warning, introduced by commit 475ca391b490a683d66bf19999a8a7a24913f139 (mpic: Deal with bogus NIRQ in Feature Reporting Register): CC arch/powerpc/sysdev/mpic.o arch/powerpc/sysdev/mpic.c: In function 'mpic_alloc': arch/powerpc/sysdev/mpic.c:1146: warning: suggest explicit braces to avoid ambiguous 'else' Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09Merge branch 'merge'Paul Mackerras
Conflicts: arch/powerpc/sysdev/fsl_soc.c
2008-06-09[POWERPC] ehea: Remove dependency on MEMORY_HOTPLUGNathan Lynch
Now that walk_memory_resource() is available regardless of MEMORY_HOTPLUG's setting, this dependency is not needed. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09[POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=nNathan Lynch
The ehea driver was recently changed[1] to use walk_memory_resource() to detect the system's memory layout. However, walk_memory_resource() is available only when memory hotplug is enabled. So CONFIG_EHEA was made to depend on MEMORY_HOTPLUG [2], but it is inappropriate for a network driver to have such a dependency. Make the declaration of walk_memory_resource() and its powerpc implementation (ehea is powerpc-specific) unconditionally available. [1] 48cfb14f8b89d4d5b3df6c16f08b258686fb12ad "ehea: Add DLPAR memory remove support" [2] fb7b6ca2b6b7c23b52be143bdd5f55a23b9780c8 "ehea: Add dependency to Kconfig" Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09[POWERPC] Use dev_set_name in pci_64.cStephen Rothwell
During the next merge window, pci_name()'s return value will become const, so use the new dev_set_name() instead to avoid the warning (from linux-next): arch/powerpc/kernel/pci_64.c: In function 'of_create_pci_dev': arch/powerpc/kernel/pci_64.c:193: warning: passing argument 1 of 'sprintf' discards qualifiers from pointer target type Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09[POWERPC] Fix incorrect enabling of VMX when building signal or user contextBenjamin Herrenschmidt
When building a signal or a ucontext, we can incorrectly set the MSR_VEC bit of the kernel pt_regs->msr before returning to userspace if the task -ever- used VMX. This can lead to funny result if that stack used it in the past, then "lost" it (ie. it wasn't enabled after a context switch for example) and then called get_context. It can end up with VMX enabled and the registers containing values from some other task. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09[POWERPC] boot/Makefile CONFIG_ variable fixesAdrian Bunk
This corrects the names of two CONFIG_ variables. Note that the CONFIG_MPC86XADS fix uncovers another bug (with mpc866_ads_defconfig) that will require fixing: <-- snip --> ... arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0 /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts DTC: dts->dtb on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts" WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-06uml: activate_mm: remove the dead PF_BORROWED_MM checkOleg Nesterov
use_mm() was changed to use switch_mm() instead of activate_mm(), since then nobody calls (and nobody should call) activate_mm() with PF_BORROWED_MM bit set. As Jeff Dike pointed out, we can also remove the "old != new" check, it is always true. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Fix SM trap forwarding IB/ehca: Reject send WRs only for RESET, INIT and RTR state MAINTAINERS: Update NetEffect (iw_nes) entry IB/ipath: Fix device capability flags IB/ipath: Avoid test_bit() on u64 SDMA status value
2008-06-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: add workaround for bug in ASUS A7V600 BIOS (rev 1005) PCI/x86: fix up PCI stuff so that PCI_GOANY supports OLPC
2008-06-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA card
2008-06-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6: capabilities: remain source compatible with 32-bit raw legacy capability support. LSM: remove stale web site from MAINTAINERS
2008-06-06Merge git://git.infradead.org/~dwmw2/mtd-2.6.26Linus Torvalds
* git://git.infradead.org/~dwmw2/mtd-2.6.26: [MTD] m25p80.c mutex unlock fix
2008-06-06ipwireless: Fix blocked sendingDavid Sterba
Packet sending is driven by two flags, tx_ready and tx_queued. It was possible, that there were queued data for sending and hardware was flagged as blocked but in fact it was not. The tx_queued was indicator but should be really a counter else first fragmented packet resets tx_queued flag, but there may be pending packets which do not get sent. New semantics: tx_ready - set, if hw is ready to send packet, no packet is being transferred right now set the flag right at the place where data are copied into hw memory and not earlier without checking if it was succesful tx_queued - count of enqueued packets, including fragments Tested-by: Michal Rokos <michal.rokos@gmail.com> Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06vm: add kzalloc_node() inlineJeff Layton
To get zeroed out memory from a particular NUMA node. To be used by sunrpc. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06pagemap: add documentation for pagemapThomas Tuttle
Just a quick explanation of the pagemap interface from a userspace point of view, and an example of how to use it (in English, not code). Signed-off-by: Thomas Tuttle <ttuttle@google.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06pagemap: return EINVAL, not EIO, for unaligned reads of kpagecount or kpageflagsThomas Tuttle
If the user tries to read from a position that is not a multiple of 8, or read a number of bytes that is not a multiple of 8, they have passed an invalid argument to read, for the purpose of reading these files. It's not an IO error because we didn't encounter any trouble finding the data they asked for. Signed-off-by: Thomas Tuttle <ttuttle@google.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06pagemap: return map count, not reference count, in /proc/kpagecountThomas Tuttle
Since pagemap is all about examining pages mapped into processes' memory spaces, it makes sense for kpagecount to return the map counts, not the reference counts. Signed-off-by: Thomas Tuttle <ttuttle@google.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06hdaps: fix module loading on Thinkpad T61PTim Gardner
Adds DMI system identifier for ThinkPad T61. Originally written by Klaus S. Madsen. Taken from http://launchpadlibrarian.net/10864950/hdaps-t61.patch Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Cc: Klaus S. Madsen <ubuntu@hjernemadsen.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06proc: calculate the correct /proc/<pid> link countVegard Nossum
This patch: commit e9720acd728a46cb40daa52c99a979f7c4ff195c Author: Pavel Emelyanov <xemul@openvz.org> Date: Fri Mar 7 11:08:40 2008 -0800 [NET]: Make /proc/net a symlink on /proc/self/net (v3) introduced a /proc/self/net directory without bumping the corresponding link count for /proc/self. This patch replaces the static link count initializations with a call that counts the number of directory entries in the given pid_entry table whenever it is instantiated, and thus relieves the burden of manually keeping the two in sync. [akpm@linux-foundation.org: cleanup] Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06rtc: class driver for ppc_md RTC functionsDavid Woodhouse
This hooks up the platform-specific [gs]et_rtc_time functions so that kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms. A new driver, and one which we've been shipping in Fedora for a while already, since otherwise RTC support breaks. [akpm@linux-foundation.org: fix Kconfig indenting] Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06asm-m32r/uaccess.h must #include <asm/setup.h>Adrian Bunk
This patch fixes the following compile error caused by commit 4016a1390d07f15b267eecb20e76a48fd5c524ef (mm/nommu.c: return 0 from kobjsize with invalid objects): /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c: In function 'kobjsize': /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: 'memory_end' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: for each function it appears in.) The patch also removes now no longer required memory_{start,end} declarations inside access_ok(). Reported-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06ext3: fix online resize bugJosef Bacik
There is a bug when we are trying to verify that the reserve inode's double indirect blocks point back to the primary gdt blocks. The fix is obvious, we need to mod the gdb count by the addr's per block. You can verify this with the following test case dd if=/dev/zero of=disk1 seek=1024 count=1 bs=100M losetup /dev/loop1 disk1 pvcreate /dev/loop1 vgcreate loopvg1 /dev/loop1 lvcreate -l 100%VG loopvg1 -n looplv1 mkfs.ext3 -J size=64 -b 1024 /dev/loopvg1/looplv1 mount /dev/loopvg1/looplv1 /mnt/loop dd if=/dev/zero of=disk2 seek=1024 count=1 bs=50M losetup /dev/loop2 disk2 pvcreate /dev/loop2 vgextend loopvg1 /dev/loop2 lvextend -l 100%VG /dev/loopvg1/looplv1 resize2fs /dev/loopvg1/looplv1 without this patch the resize2fs fails, with it the resize2fs succeeds. Signed-off-by: Josef Bacik <jbacik@redhat.com> Acked-by: Andreas Dilger <adilger@sun.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06nommu: fix ksize() abusePekka Enberg
The nommu binfmt code uses ksize() for pointers returned from do_mmap() which is wrong. This converts the call-sites to use the nommu specific kobjsize() function which works as expected. Cc: Christoph Lameter <clameter@sgi.com> Cc: Matt Mackall <mpm@selenic.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06doc: document the kernel-doc conventions for kernel hackersPaul Jackson
Provide documentation of the kernel-doc documentation conventions oriented to kernel hackers. Since I figure that there will be more people reading this kernel-doc-nano-HOWTO.txt file who are kernel developers focused on the rest of the kernel, than there will be readers of this file who are documentation developers extracting that embedded kernel-doc documentation, I have taken the liberty of making the new section added here: How to format kernel-doc comments the first section of the kernel-doc-nano-HOWTO.txt file. This first section is intended to introduce, motivate and provide basic usage of the kernel-doc mechanism for kernel hackers developing other portions of the kernel. Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06fbdev: export symbol fb_mode_optionGeoff Levand
Frame buffer and mode setting drivers can be built as modules, so fb_mode_option needs to be exported to support these. Prevents this error: ERROR: "fb_mode_option" [drivers/ps3/ps3av_mod.ko] undefined! Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06MAINTAINERS: reiserfs entry is out of dateAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Edward Shishkin <edward.shishkin@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>