aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-05-23IB/ipath: fix null deref during rdma opsBryan O'Sullivan
The problem was that node A's sending thread, which handles sending RDMA read response data, would write the trigger word, the last packet would be sent, node B would send a new RDMA read request, node A's interrupt handler would initialize s_rdma_sge, then node A's sending thread would update s_rdma_sge. This didn't happen very often naturally but was more frequent with 1 byte RDMA reads. Rather than adding more locking or increasing the QP structure size and copying sge data, I modified the copy routine to update the pointers before writing the trigger word to avoid the update race. Signed-off-by: Ralph Campbell <ralphc@pathscale.com> Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: register as IB device ownerBryan O'Sullivan
This fixes an oops. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: enable PE800 receive interrupts on user portsBryan O'Sullivan
Fixed so it works on the PE-800. It had not previously been updated to match PE-800 receive interrupt differences from HT-400. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: enable GPIO interrupt on HT-460Bryan O'Sullivan
This is required for even semi-decent performance on OpenIB. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix NULL dereference during cleanupBryan O'Sullivan
Fix NULL deref due to pcidev being clobbered before dd->ipath_f_cleanup() was called. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: replace uses of LIST_POISONBryan O'Sullivan
Per Andrew's request. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix reporting of driver version to userspaceBryan O'Sullivan
Fix the interface version that gets exported to userspace. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: don't modify QP if changes failBryan O'Sullivan
Make sure modify_qp won't modify the QP if any of the changes failed. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix spinlock recursion bugBryan O'Sullivan
The local loopback path for RC can lock the rkey table lock without blocking interrupts. The receive interrupt path can then call ipath_rkey_ok() and deadlock. Remove the redundant lock. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Respect gfp_t argument to dma_alloc_coherent().
2006-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: SNMP NAT: fix memory corruption [IRDA]: fixup type of ->lsap_state [IRDA]: fix 16/32 bit confusion [NET]: Fix "ntohl(ntohs" bugs [BNX2]: Use kmalloc instead of array [BNX2]: Fix bug in bnx2_nvram_write() [TG3]: Add some missing rx error counters
2006-05-23[PATCH] blk: fix gendisk->in_flight accounting during barrier sequenceJens Axboe
While executing barrrier sequence, the bar_rq which carries actual write was accounted as normal IO on completion, while it wasn't on queueing. This caused gendisk->in_flight to be decremented by 1 after each barrier thus messed up statistics. This patch makes bar_rq not accounted as normal IO. As the containing barrier request as a whole is accounted, part of it shouldn't be. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] powerpc: wire up sys_[gs]et_robust_listDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] powerpc: check Cell SPU syscall number range _before_ using itDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] powerpc: fill hole in Cell SPU syscall tableDavid Woodhouse
Syscall number 224 was absent from the table, which I believe means that the SPU can cause an oops by attempting to use it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] orinoco: possible null pointer dereference in orinoco_rx_monitor()Florin Malita
If the skb allocation fails, the current error path calls dev_kfree_skb_irq() with a NULL argument. Also, 'err' is not being used. Coverity CID: 275. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] swsusp: fix typo in cr0 handlingPavel Machek
Writing cr0 to cr2 register can't be right. This fixes the typo. I wonder how it could survive so long. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] tty_insert_flip_string_flags() license fixTobias Powalowski
We still don't have the tty layer licensing compatibility quite right. tty_insert_flip_char() used to be inlined in include/linux/tty_flip.h. It is now out-of-lined and hence needs EXPORT_SYMBOL() to be back-compatible. One known offender is the Intel Modem driver. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] md: Make sure bi_max_vecs is set properly in bio_splitNeilBrown
Else a subsequent bio_clone might make a mess. Signed-off-by: Neil Brown <neilb@suse.de> Cc: "Don Dupuis" <dondster@gmail.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] md: fix possible oops when starting a raid0 arrayNeilBrown
This loop that sets up the hash_table has problems. Careful examination will show that the last time through, everything but the first line is pointless. This is because all it does is change 'cur' and 'size' and neither of these are used after the loop. This should ring warning bells... That last time through the loop, size += conf->strip_zone[cur].size can index off the end of the strip_zone array. Depending on what it finds there, it might exit the loop cleanly, or it might spin going further and further beyond the array until it hits an unmapped address. This patch rearranges the code so that the last, pointless, iteration of the loop never happens. i.e. the one statement of the last loop that is needed is moved the the end of the previous loop - or to before the loop starts - and the loop counter starts from 1 instead of 0. Cc: "Don Dupuis" <dondster@gmail.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] knfsd: Fix two problems that can cause rmmod nfsd to dieNeilBrown
Both cause the 'entries' count in the export cache to be non-zero at module removal time, so unregistering that cache fails and results in an oops. 1/ exp_pseudoroot (used for NFSv4 only) leaks a reference to an export entry. 2/ sunrpc_cache_update doesn't increment the entries count when it adds an entry. Thanks to "david m. richter" <richterd@citi.umich.edu> for triggering the problem and finding one of the bugs. Cc: "david m. richter" <richterd@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] sys_sync_file_range(): move exported flags outside __KERNEL__Andrew Morton
These flags are needed by userspace - move them outside __KERNEL__ (Pointed out by dwmw2) Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[SPARC64]: Respect gfp_t argument to dma_alloc_coherent().David S. Miller
Using asm-generic/dma-mapping.h does not work because pushing the call down to pci_alloc_coherent() causes the gfp_t argument of dma_alloc_coherent() to be ignored. Fix this by implementing things directly, and adding a gfp_t argument we can use in the internal call down to the PCI DMA implementation of pci_alloc_coherent(). This fixes massive memory corruption when using the sound driver layer, which passes things like __GFP_COMP down into these routines and (correctly) expects that to work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[NETFILTER]: SNMP NAT: fix memory corruptionPatrick McHardy
Fix memory corruption caused by snmp_trap_decode: - When snmp_trap_decode fails before the id and address are allocated, the pointers contain random memory, but are freed by the caller (snmp_parse_mangle). - When snmp_trap_decode fails after allocating just the ID, it tries to free both address and ID, but the address pointer still contains random memory. The caller frees both ID and random memory again. - When snmp_trap_decode fails after allocating both, it frees both, and the callers frees both again. The corruption can be triggered remotely when the ip_nat_snmp_basic module is loaded and traffic on port 161 or 162 is NATed. Found by multiple testcases of the trap-app and trap-enc groups of the PROTOS c06-snmpv1 testsuite. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[IRDA]: fixup type of ->lsap_stateAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[IRDA]: fix 16/32 bit confusionAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[NET]: Fix "ntohl(ntohs" bugsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[BNX2]: Use kmalloc instead of arrayMichael Chan
Use kmalloc() instead of a local array in bnx2_nvram_write(). Update version to 1.4.40. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[BNX2]: Fix bug in bnx2_nvram_write()Michael Chan
Fix a bug in bnx2_nvram_write() caused by a counter variable not correctly incremented by 4. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[TG3]: Add some missing rx error countersMichael Chan
Add some missing rx error counters for 5705 and newer chips. Update version to 3.58. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-21[SPARC]: Add robust futex syscall entries.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-21[SUNSU]: Fix license.Andrew Morton
FATAL: modpost: GPL-incompatible module sunsu uses the GPL-only symbol tty_insert_flip_string_flags Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-21Revert "[PATCH] sched: fix interactive task starvation"Linus Torvalds
This reverts commit 5ce74abe788a26698876e66b9c9ce7e7acc25413 (and its dependent commit 8a5bc075b8d8cf7a87b3f08fad2fba0f5d13295e), because of audio underruns. Reported by Rene Herman <rene.herman@keyaccess.nl>, who also pinpointed the exact cause of the underruns: "Audio underruns galore, with only ogg123 and firefox (browsing the GIT tree online is also a nice trigger by the way). If I back it out, everything is fine for me again." Cc: Rene Herman <rene.herman@keyaccess.nl> Cc: Mike Galbraith <efault@gmx.de> Acked-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (3965): Fix CONFIG_VIDEO_VIVI=y build bug V4L/DVB (3964): Bt8xx/bttv-cards.c: fix off-by-one errors V4L/DVB (3914): Vivi build fix V4L/DVB (3912): Sparc32 vivi fix V4L/DVB (3832): Get_dvb_firmware: download nxt2002 firmware from new driver location V4L/DVB (3829): Fix frequency values in the ranges structures of the LG TDVS H06xF tuners V4L/DVB (3826): Saa7134: Missing 'break' in Terratec Cinergy 400 TV initialization V4L/DVB (3825): Remove broken 'fast firmware load' from cx25840. V4L/DVB (3819): Cxusb-bluebird: bug-fix: power down corrupts frontend V4L/DVB (3813): Add support for TCL M2523_5N_E tuner. V4L/DVB (3804): Tweak bandselect setup fox cx24123 V4L/DVB (3803): Various correctness fixes to tuning. V4L/DVB (3797): Always wait for diseqc queue to become ready before transmitting a diseqc message V4L/DVB (3796): Add several debug messages to cx24123 code V4L/DVB (3795): Fix for CX24123 & low symbol rates V4L/DVB (3792): Kbuild: DVB_BT8XX must select DVB_ZL10353 V4L/DVB (3790): Use after free in drivers/media/video/em28xx/em28xx-video.c V4L/DVB (3788): Fix compilation with V4L1_COMPAT V4L/DVB (3782): Removed uneeded stuff from pwc Makefile V4L/DVB (3775): Add VIVI Kconfig stuff ...
2006-05-21[PATCH] ad1848 section fixAndrew Morton
WARNING: sound/oss/ad1848.o - Section mismatch: reference to .init.data:ad1848_isapnp_list from .text between 'ad1848_init_generic' (at offset 0x46f0) and 'kmalloc' WARNING: sound/oss/ad1848.o - Section mismatch: reference to .init.data:ad1848_isapnp_list from .text between 'ad1848_init_generic' (at offset 0x46f8) and 'kmalloc' WARNING: sound/oss/ad1848.o - Section mismatch: reference to .init.data:ad1848_isapnp_list from .text between 'ad1848_init_generic' (at offset 0x4818) and 'kmalloc' Also, sound/oss/ad1848.c: In function `ad1848_init': sound/oss/ad1848.c:2029: warning: cast to pointer from integer of different size sound/oss/ad1848.c: In function `ad1848_unload': sound/oss/ad1848.c:2178: warning: cast to pointer from integer of different size sound/oss/ad1848.c: In function `adintr': sound/oss/ad1848.c:2207: warning: cast from pointer to integer of different size Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] nm256_audio section fixAndrew Morton
WARNING: sound/oss/nm256_audio.o - Section mismatch: reference to .init.text:nm256_peek_for_sig from .text between 'nm256_install' (at offset 0x3ba4) and 'nm256_probe' WARNING: sound/oss/nm256_audio.o - Section mismatch: reference to .init.text:nm256_peek_for_sig from .text between 'nm256_install' (at offset 0x3bac) and 'nm256_probe' WARNING: sound/oss/nm256_audio.o - Section mismatch: reference to .init.text: from .text between 'nm256_install' (at offset 0x3dcc) and 'nm256_probe' WARNING: sound/oss/nm256_audio.o - Section mismatch: reference to .init.text: from .text between 'nm256_install' (at offset 0x3dd0) and 'nm256_probe' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] es18xx build fixAndrew Morton
sound/isa/es18xx.c: In function `snd_es18xx_identify': sound/isa/es18xx.c:1606: warning: implicit declaration of function `udelay' Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] mpu401 section fixAndrew Morton
WARNING: sound/drivers/mpu401/snd-mpu401.o - Section mismatch: reference to .init.text: from .text between 'snd_mpu401_pnp_probe' (at offset 0x1f7) and 'snd_mpu401_pnp_remove' Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] i810 section fixAndrew Morton
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1b88) and 'i810_alloc_agp_mem' WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1b8f) and 'i810_alloc_agp_mem' WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1ba3) and 'i810_alloc_agp_mem' WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1bb5) and 'i810_alloc_agp_mem' WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1bc6) and 'i810_alloc_agp_mem' WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_init_defaults' (at offset 0x1dd8) and 'i810_init_device' WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_init_defaults' (at offset 0x1dfb) and 'i810_init_device' Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] pd6729 section fixAndrew Morton
WARNING: drivers/pcmcia/pd6729.o - Section mismatch: reference to .init.text: from .text between 'pd6729_pci_probe' (at offset 0x9a8) and 'pd6729_pci_remove' Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] Align the node_mem_map endpoints to a MAX_ORDER boundaryBob Picco
Andy added code to buddy allocator which does not require the zone's endpoints to be aligned to MAX_ORDER. An issue is that the buddy allocator requires the node_mem_map's endpoints to be MAX_ORDER aligned. Otherwise __page_find_buddy could compute a buddy not in node_mem_map for partial MAX_ORDER regions at zone's endpoints. page_is_buddy will detect that these pages at endpoints are not PG_buddy (they were zeroed out by bootmem allocator and not part of zone). Of course the negative here is we could waste a little memory but the positive is eliminating all the old checks for zone boundary conditions. SPARSEMEM won't encounter this issue because of MAX_ORDER size constraint when SPARSEMEM is configured. ia64 VIRTUAL_MEM_MAP doesn't need the logic either because the holes and endpoints are handled differently. This leaves checking alloc_remap and other arches which privately allocate for node_mem_map. Signed-off-by: Bob Picco <bob.picco@hp.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] kobject: quiet errors in kobject_addGreg Kroah-Hartman
People don't like released kernels yelling at them, no matter how real the error might be. So only report it if CONFIG_KOBJECT_DEBUG is enabled. Sent on request of Andrew Morton. (akpm: should bring this back post-2.6.17) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] rtc subsystem: use ENOIOCTLCMD and ENOTTY where appropriateAlessandro Zummo
Appropriately use -ENOIOCTLCMD and -ENOTTY when the ioctl is not implemented by a driver. (akpm: we're not allowed to return -ENOIOCTLCMD to userspace. This patch does the right thing). Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] kbuild: fix modpost segfault for 64bit mipsel kernelAtsushi Nemoto
Here is an updated r_info layout fix. Please apply "check SHT_REL sections" patch before this. 64bit mips has different r_info layout. This patch fixes modpost segfault for 64bit little endian mips kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] kbuild: check SHT_REL sectionsAtsushi Nemoto
I found that modpost can not detect section mismatch on mips and i386. On mips64, the modpost (with r_info layout fix) can detect it. The current modpst only checks SHT_RELA section but I suppose SHT_REL section should be checked also. This patch does not contain r_info layout fix. I'll post an updated r_info layout fix on next mail. Check SHT_REL sections as like as SHT_RELA sections to detect section mismatch. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] s390: next_timer_interrupt overflow in stop_hz_timerMartin Schwidefsky
The 32 bit unsigned substraction (next - jiffies) in stop_hz_timer can overflow if jiffies gets advanced between next_timer_interrupt and the read under the xtime lock. The cast to a u64 then results in a large value which causes the cpu to wait too long. Fix this by casting next and jiffies independently to u64 before subtracting them. (Spotted by Zachary Amsden <zach@vmware.com>) Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] Fix a NO_IDLE_HZ timer bugZachary Amsden
Under certain timing conditions, a race during boot occurs where timer ticks are being processed on remote CPUs. The remote timer ticks can increment jiffies, and if this happens during a window when a timeout is very close to expiring but a local tick has not yet been delivered, you can end up with 1) No softirq pending 2) A local timer wheel which is not synced to jiffies 3) No high resolution timer active 4) A local timer which is supposed to fire before the current jiffies value. In this circumstance, the comparison in next_timer_interrupt overflows, because the base of the comparison for high resolution timers is jiffies, but for the softirq timer wheel, it is relative the the current base of the wheel (jiffies_base). Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] missing newline in scsi/st.cRene Herman
st: Version 20050830, fixed bufsize 32768, s/g segs 256 st 0:0:6:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 B) Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] kprobes: bad manipulation of 2 byte opcode on x86_64Satoshi Oshima
Problem: If we put a probe onto a callq instruction and the probe is executed, kernel panic of Bad RIP value occurs. Root cause: If resume_execution() found 0xff at first byte of p->ainsn.insn, it must check the _second_ byte. But current resume_execution check _first_ byte again. I changed it checks second byte of p->ainsn.insn. Kprobes on i386 don't have this problem, because the implementation is a little bit different from x86_64. Cc: Andi Kleen <ak@muc.de> Signed-off-by: Satoshi Oshima <soshima@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] i386 kdump boot cpu physical apicid fixVivek Goyal
o Kdump second kernel boot fails after a system crash if second kernel is UP and acpi=off and if crash occurred on a non-boot cpu. o Issue here is that MP tables report boot cpu lapic id as 0 but second kernel is booting on a different processor and MP table data is stale in this context. Hence apic_id_registered() check fails in setup_local_APIC() when called from APIC_init_uniprocessor(). o Problem is not seen if ACPI is enabled as in that case boot_cpu_physical_apicid is read from the LAPIC. o Problem is not seen with SMP kernels as well because in this case also boot_cpu_physical_apicid is read from LAPIC. (smp_boot_cpus()). o The problem is fixed by reading boot_cpu_physical_apicid from LAPIC if it is a UP kernel and CRASH_DUMP is enabled. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>