aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-13bnx2x: HW attention lockEilon Greenstein
HW attention lock Making sure that only one function will handle the HW attention. This makes the device parameter aeu_mask redundant so it is removed Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: HW lock mechanismYitchak Gertner
HW lock mechanism Enhancing the HW lock to work per function and not only per port - this is needed for the next patch that protects races over HW attention detection between the different functions. At this chance, changing the functions names to be more inline with the current naming convention Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Load/Unload under trafficVladislav Zolotarov
Load/Unload under traffic Few issues were found when loading and unloading under traffic: - When receiving Tx interrupt call netif_wake_queue if the queue is stopped but the state is open - Check that interrupts are enabled before doing anything else on the msix_fp_int function - In nic_load, enable the interrupts only when needed and ready for it - Function stop_leading returns status since it can fail - Add 1ms delay when unloading the driver to validate that there are no open transactions that already started by the FW - Splitting the "has work" function into Tx and Rx so the same function will be used on unload and interrupts - Do not request for WoL if only resetting the device (save the time that it takes the FW to set the link after reset) - Fixing the device reset after iSCSI boot and before driver load - all internal buffers must be cleared before the driver is loaded Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: FW Internal Memory structureEilon Greenstein
FW Internal Memory structure The FW uses data structures on the chip internal memory to aggregate the connections when TPA is enabled. The driver was clearing the wrong offsets and therefore one function could cause another function to loose packets. Changing the initialization of the chip internal memory to clear only the relevant memory for each function which is being loaded Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: StatisticsYitchak Gertner
Statistics - Making sure that each drop is accounted for in the driver statistics - Clearing the FW statistics when driver is loaded to prevent inconsistency with HW statistics - Once error is detected (bnx2x_panic_dump), stop the statistics before other actions (currently it is stopped last and can corrupt the data) - Adding HW checksum error counter to the statistics - Removing unused variable stats_ticks - Using macros instead of magic numbers to indicate which statistics are shared per port and which are per function Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Not dropping packets with L3/L4 checksum errorEilon Greenstein
Not dropping packets with L3/L4 checksum error Those packets should be passed to the OS. The problem is clear in forwarding mode. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: FW (bootcode) interface fixesEilon Greenstein
FW (bootcode) interface fixes - Making sure that the device will not cause kernel panic of the bootcode is corrupted or missing - Removing module debug parameter "nomcp" since no one should work without the bootcode (this is a left over from the chip bring up days) - Instead of waiting fix amount of time for bootcode response, sample it every 10ms (usually the answer is ready after less than 10ms) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13pkt_sched: Protect gen estimators under est_lock.Jarek Poplawski
gen_kill_estimator() required rtnl_lock() protection, but since it is moved to an RCU callback __qdisc_destroy() let's use est_lock instead. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13pkt_sched: Fix queue quiescence testing in dev_deactivate().David S. Miller
Based upon discussions with Jarek P. and Herbert Xu. First, we're testing the wrong qdisc. We just reset the device queue qdiscs to &noop_qdisc and checking it's state is completely pointless here. We want to wait until the previous qdisc that was sitting at the ->qdisc pointer is not busy any more. And that would be ->qdisc_sleeping. Because of how we propagate the samples qdisc pointer down into qdisc_run and friends via per-cpu ->output_queue and netif_schedule, we have to wait also for the __QDISC_STATE_SCHED bit to clear as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13pkt_sched: Fix oops in htb_delete.Jarek Poplawski
Recent changes introduced a bug in htb_delete(): cl->parent->children counter update misses checking cl->parent for NULL, which is used for root classes, so deleting them causes an oops. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13pktgen: prevent pktgen from using bad tx queueAndrew Gallatin
With the new multi-queue transmit code, it is possible to accidentally make pktgen pick a non-existing tx queue simply by using a stale script to drive pktgen. Access to this non-existing tx queue will then trigger a bad memory access and kill the machine. For example, setting "queue_map_max 2" will cause my machine to die when accessing a garbage spinlock in the non-existing tx queue: BUG: spinlock bad magic on CPU#0, kpktgend_0/564 lock: ffff88001ddf6718, .magic: ffffffff, .owner: /-1, .owner_cpu: 0 Pid: 564, comm: kpktgend_0 Not tainted 2.6.27-rc3 #35 Call Trace: [<ffffffff803a1228>] spin_bug+0xa4/0xac [<ffffffff803a1253>] _raw_spin_lock+0x23/0x123 [<ffffffff8055b06f>] _spin_lock_bh+0x17/0x1b [<ffffffff804cb57d>] pktgen_thread_worker+0xa97/0x1002 [<ffffffff8022874d>] ? finish_task_switch+0x38/0x97 [<ffffffff80242077>] ? autoremove_wake_function+0x0/0x36 [<ffffffff80242077>] ? autoremove_wake_function+0x0/0x36 [<ffffffff804caae6>] ? pktgen_thread_worker+0x0/0x1002 [<ffffffff80241a40>] kthread+0x44/0x6d [<ffffffff8020c399>] child_rip+0xa/0x11 [<ffffffff802419fc>] ? kthread+0x0/0x6d [<ffffffff8020c38f>] ? child_rip+0x0/0x11 The attached patch adds some sanity checking to prevent these sorts of configuration errors. Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13dccp: change L/R must have at least one byte in the dccpsf_val fieldArnaldo Carvalho de Melo
Thanks to Eugene Teo for reporting this problem. Signed-off-by: Eugene Teo <eugenete@kernel.sg> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13xfrm: remove unnecessary variable in xfrm_output_resume() 2nd tryJean-Christophe DUBOIS
Small fix removing an unnecessary intermediate variable. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13net-sched: fix Action flushing return codeJamal Hadi Salim
Flushing must consistently return ENOMEM on failure of any allocation Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13net-sched: Fix actions flushingJamal Hadi Salim
Flushing of actions has been broken since we changed the semantics of netlink parsed tb[X] to mean X is an attribute type. This makes the flushing work. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13net/rxrpc: Use an IS_ERR test rather than a NULL testJulien Brunel
In case of error, the function rxrpc_get_transport returns an ERR pointer, but never returns a NULL pointer. So after a call to this function, a NULL test should be replaced by an IS_ERR test. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = rxrpc_get_transport(...) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13wext: Send name on eventsJamal Hadi Salim
In the minimal the wireless extensions oughta send at least the name in addition to the ifindex. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13ipv6: Kill unused ip6_prohibit_entry and ip6_blk_hole_entry declarations.Rami Rosen
This patch removes ip6_prohibit_entry and ip6_blk_hole_entry declarations from include/net/ip6_route.h as they are unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13ipv6: ip6_route.h cleanup.Rami Rosen
This patch removes rt6_lock declaration from include/net/ip6_route.h as it is unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13net/tipc/subscr.c: don't use ___constant_swab32Andrew Morton
It's an internal implementation detail which we _should_ be free to change. So we did, and it promptly broke. The compiler shold be able to work out when to use the __constant version anyway. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13pkt_sched: Add queue stopped test back to qdisc_run().David S. Miller
Based upon a bug report by Andrew Gallatin on netdev with subject "CPU utilization increased in 2.6.27rc" In commit 37437bb2e1ae8af470dfcd5b4ff454110894ccaf ("pkt_sched: Schedule qdiscs instead of netdev_queue.") the test of the queue being stopped was erroneously removed from qdisc_run(). When the TX queue of the device fills up, this omission causes lots of extraneous useless work to be queued up to softirq context, where we'll just return immediately because the device is still stuffed up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13ipv6: Fix OOPS, ip -f inet6 route get fec0::1, linux-2.6.26, ↵Brian Haley
ip6_route_output, rt6_fill_node+0x175 Alexey Dobriyan wrote: > On Thu, Aug 07, 2008 at 07:00:56PM +0200, John Gumb wrote: >> Scenario: no ipv6 default route set. > >> # ip -f inet6 route get fec0::1 >> >> BUG: unable to handle kernel NULL pointer dereference at 00000000 >> IP: [<c0369b85>] rt6_fill_node+0x175/0x3b0 >> EIP is at rt6_fill_node+0x175/0x3b0 > > 0xffffffff80424dd3 is in rt6_fill_node (net/ipv6/route.c:2191). > 2186 } else > 2187 #endif > 2188 NLA_PUT_U32(skb, RTA_IIF, iif); > 2189 } else if (dst) { > 2190 struct in6_addr saddr_buf; > 2191 ====> if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev, > ^^^^^^^^^^^^^^^^^^^^^^^^ > NULL > > 2192 dst, 0, &saddr_buf) == 0) > 2193 NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf); > 2194 } The commit that changed this can't be reverted easily, but the patch below works for me. Fix NULL de-reference in rt6_fill_node() when there's no IPv6 input device present in the dst entry. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-11skbuff: Code readability NiTGerrit Renker
Inserting a space between the `-' improved the C readability (some languages allow hyphens within functions and variable names, which is confusing). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-11pkt_sched: Add BH protection for qdisc_stab_lock.Jarek Poplawski
Since qdisc_stab_lock is used in qdisc_put_stab(), which is called in BH context from __qdisc_destroy() RCU callback, softirq safe locking is needed. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-11Merge branch 'stealer/ipvs/for-davem' of git://git.stealer.net/linux-2.6David S. Miller
2008-08-11ipvs: add lvs-devel as a list contactSimon Horman
Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-11ipvs: Explictly clear ip_vs_stats membersSimon Horman
In order to align the coding styles of ip_vs_zero_stats() and its child-function ip_vs_zero_estimator(), clear ip_vs_stats members explicitlty rather than doing a limited memset(). This was chosen over modifying ip_vs_zero_estimator() to use memset() as it is more robust against changes in members in the relevant structures. memset() would be prefered if all members of the structure were to be cleared. Cc: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2008-08-11ipvs: No need to zero out ip_vs_stats during initializationSven Wegener
It's a global variable and automatically initialized to zero. And now we can also initialize the lock at compile time. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Embed estimator object into stats objectSven Wegener
There's no reason for dynamically allocating an estimator object for every stats object. Directly embed an estimator object into every stats object and switch to using the kernel-provided list implementation. This makes the code much simpler and faster, as we do not need to traverse the list of all estimators to find the one belonging to a stats object. There's no need to use an rwlock, as we only have one reader. Also reorder the members of the estimator structure slightly to avoid padding overhead. This can't be done with the stats object as the members are currently copied to our user space object via memcpy() and changing it would break ABI. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Mark net_vs_ctl_path constSven Wegener
Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Annotate init functions with __initSven Wegener
Being able to discard these functions saves a couple of bytes at runtime. The cleanup functions can't be annotated with __exit as they are also called from init functions. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Initialize schedulers' struct list_head at compile timeSven Wegener
No need to do it at runtime and this saves a couple of bytes in the text section. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Use list_empty() instead of open-coding the same functionalitySven Wegener
Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Use ARRAY_SIZE()Sven Wegener
Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Fix possible deadlock in estimator codeSven Wegener
There is a slight chance for a deadlock in the estimator code. We can't call del_timer_sync() while holding our lock, as the timer might be active and spinning for the lock on another cpu. Work around this issue by using try_to_del_timer_sync() and releasing the lock. We could actually delete the timer outside of our lock, as the add and kill functions are only every called from userspace via [gs]etsockopt() and are serialized by a mutex, but better make this explicit. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Cc: stable <stable@kernel.org> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Fix possible deadlock in sync codeSven Wegener
Commit 998e7a76804b7a273a0460c2cdd5a51fa9856717 ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()") introduced a possible deadlock in the sync code. We need to use the _bh versions for the lock, as the lock is also accessed from a bottom half. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-09udp: Drop socket lock for encapsulated packetsHerbert Xu
The socket lock is there to protect the normal UDP receive path. Encapsulation UDP sockets don't need that protection. In fact the locking is deadly for them as they may contain another UDP packet within, possibly with the same addresses. Also the nested bit was copied from TCP. TCP needs it because of accept(2) spawning sockets. This simply doesn't apply to UDP so I've removed it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-08pkt_sched: Fix ingress deletion and filter attachment.David S. Miller
Based upon bug reports by Stephen Hemminger. We still had some cases using ->qdisc instead of ->qdisc_sleeping. Also, qdisc_lookup() should return ingress qdiscs. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07pkt_sched: Fix actions referencingJamal Hadi Salim
When an action is added several times with the same exact index it gets deleted on every even-numbered attempt. This fixes that issue. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07bnx2x: fix logical opRandy Dunlap
Fix dubious logical operation that was found by sparse: linux-next-20080807/drivers/net/bnx2x_main.c:7205:27: warning: dubious: !x & y Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6
2008-08-07tcp: (whitespace only) fix confusing indentationAdam Langley
The indentation in part of tcp_minisocks makes it look like one of the if statements is much more important than it actually is. Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07pkt_sched: Fix qdisc config when link is down.David S. Miller
Bug reported by Stephen Hemminger. We need to fetch the root from ->qdisc_sleeping not ->qdisc. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07Merge branch 'ath9k' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-08-07[Bluetooth] Add full quirk implementation for btusb driverMarcel Holtmann
This implements all the quirk handling from the hci_usb driver to the new btusb driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07[Bluetooth] Removal of unnecessary ignore module parameterMarcel Holtmann
This removes the unnecessary ignore parameter, which is useless. There are alternate methods of kicking a driver off an USB device. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07[Bluetooth] Add parameters to control BNEP header compressionMarcel Holtmann
The Bluetooth qualification for PAN demands testing with BNEP header compression disabled. This is actually pretty stupid and the Linux implementation outsmarts the test system since it compresses whenever possible. So to pass qualification two need parameters have been added to control the compression of source and destination headers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07ath9k: Revamp wireless mode usageSujith
Use a single enum for managing modes, store supported modes by the HW in a bitmask. Register legacy rates with mac80211 only at init. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: More unused macrosSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Remove a few unused macros and fix indentationSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 02:36:19 +0000