aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-04x86: mach-rdc321x Kconfig fixFlorian Fainelli
The mach-rdc321x uses the leds-gpio driver and explicitely selects it, this driver also depends on the leds class module, select it as well. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-04x86: rename module scx200_32 to scx200Sam Ravnborg
The module scx200 were renamed to scx200_32 by the merge of the 32 and 64 bit x86 arch trees. Keep the _32 prefix on the .c file as it is 32 bit specific and fix the module name in the Makefile. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04x86: restore correct module name for apmSam Ravnborg
The apm module were renamed to apm_32 during the merge of 32 and 64 bit x86 which is unfortunate. As apm is 32 bit specific we like to keep the _32 in the filename but the module should be named apm. Fix this in the Makefile. Reported-by: "A.E.Lawrence" <lawrence_a_e@ntlworld.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "A.E.Lawrence" <lawrence_a_e@ntlworld.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04x86: VMI fixIngo Molnar
Jeff Chua bisected down a vmware guest boot breakage (hang) to this paravirt change: commit 8d947344c47a40626730bb80d136d8daac9f2060 Author: Glauber de Oliveira Costa <gcosta@redhat.com> Date: Wed Jan 30 13:31:12 2008 +0100 x86: change write_idt_entry signature fix the off-by-one indexing bug ... Bisected-by: Jeff Chua <jeff.chua.linux@gmail.com> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-04x86: relax RAM check in ioremap()Ingo Molnar
Kevin Winchester reported the loss of direct rendering, due to: [ 0.588184] agpgart: Detected AGP bridge 0 [ 0.588184] agpgart: unable to get memory for graphics translation table. [ 0.588184] agpgart: agp_backend_initialize() failed. [ 0.588207] agpgart-amd64: probe of 0000:00:00.0 failed with error -12 and bisected it down to: commit 266b9f8727976769e2ed2dad77ac9295f37e321e Author: Thomas Gleixner <tglx@linutronix.de> Date: Wed Jan 30 13:34:06 2008 +0100 x86: fix ioremap RAM check this check was too strict and caused an ioremap() failure. the problem is due to the somewhat unclean way of how the GART code reserves a memory range for its aperture, and how it utilizes it later on. Allow RAM pages to be ioremap()-ed too, as long as they are reserved. Bisected-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits) ide-tape: remove idetape_config_t typedef ide-tape: remove mtio.h related comments ide-tape: make function name more accurate ide-tape: remove unused sense packet commands. ide-tape: use generic byteorder macros ide-tape: remove EXPERIMENTAL driver status ide-tape: use generic scsi commands ide-tape: remove struct idetape_block_size_page_t ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t ide-tape: remove struct idetape_parameter_block_descriptor_t ide-tape: remove struct idetape_medium_partition_page_t ide-tape: remove struct idetape_data_compression_page_t ide-tape: remove struct idetape_inquiry_result_t ide-tape: remove struct idetape_capabilities_page_t ide-tape: remove IDETAPE_DEBUG_BUGS ide-tape: remove IDETAPE_DEBUG_INFO ide-tape: dump gcw fields on error in idetape_identify_device() ide-tape: remove struct idetape_mode_parameter_header_t ide-tape: remove struct idetape_request_sense_result_t ide-tape: remove dead code ...
2008-02-03fix writev regression: pan hanging unkillable and un-straceableNick Piggin
Frederik Himpe reported an unkillable and un-straceable pan process. Zero length iovecs can go into an infinite loop in writev, because the iovec iterator does not always advance over them. The sequence required to trigger this is not trivial. I think it requires that a zero-length iovec be followed by a non-zero-length iovec which causes a pagefault in the atomic usercopy. This causes the writev code to drop back into single-segment copy mode, which then tries to copy the 0 bytes of the zero-length iovec; a zero length copy looks like a failure though, so it loops. Put a test into iov_iter_advance to catch zero-length iovecs. We could just put the test in the fallback path, but I feel it is more robust to skip over zero-length iovecs throughout the code (iovec iterator may be used in filesystems too, so it should be robust). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: fix bogus s/g access change
2008-02-02ide-tape: remove idetape_config_t typedefBorislav Petkov
Since this is used only in idetape_blkdev_ioctl(), remove the typedef and make the struct function-local. Bart: - s/sizeof(struct idetape_config)/sizeof(config)/ Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove mtio.h related commentsBorislav Petkov
Those are already in mtio.h. Bart: - undo 'unsigned int/unsigned long' -> 'uint/ulong' conversion Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: make function name more accurateBorislav Petkov
idetape_active_next_stage() was rather ambiguous wrt its purpose. Make that more explicit and remove superfluous comment. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove unused sense packet commands.Borislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: use generic byteorder macrosBorislav Petkov
This is not a network driver. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove EXPERIMENTAL driver statusBorislav Petkov
ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is being only maintained now. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: use generic scsi commandsBorislav Petkov
Also, remove those which weren't used. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_block_size_page_tBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_tBorislav Petkov
They seem just to sit there completely unused. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_parameter_block_descriptor_tBorislav Petkov
Also, shorten function name idetape_get_blocksize_from_block_descriptor() and move its definition up thereby getting rid of its forward declaration. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_medium_partition_page_tBorislav Petkov
There should be no functional changes resulting from this patch. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_data_compression_page_tBorislav Petkov
There should be no functional changes resulting from this patch. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_inquiry_result_tBorislav Petkov
There should be no functional changes resulting from this patch. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_capabilities_page_tBorislav Petkov
All those 2-byte values denoting the different capabilities are being written to the local copy of the caps buffer without being converted to big endian for simplicity of usage and shorter code later. Also, we add some comments stating which are the fields of the caps page in question in order to alleviate the cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results(). There should be no functional changes resulting from this patch. Bart: - remove two needless "!!" Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove IDETAPE_DEBUG_BUGSBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove IDETAPE_DEBUG_INFOBorislav Petkov
The device capabilities are probed for during device initialization so this info is available through proc/ioctl() und it is redundant here. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: dump gcw fields on error in idetape_identify_device()Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_mode_parameter_header_tBorislav Petkov
Bart: - remove 'capabilities->speed' chunk - re-add brackets to block_descrp assignment Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove struct idetape_request_sense_result_tBorislav Petkov
Bart: - remove unnecessary comment change - remove two needless "!!" Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: remove dead codeBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: move historical changelog to ↵Borislav Petkov
Documentation/ide/ChangeLog.ide-tape.1995-2002 Also, cleanup whitespace and update comments. Bart: - remove reference to drivers/block/ide.c - move driver documentation to Documentation/ide/ide-tape.txt Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-cs: use ide_std_init_ports()Bartlomiej Zolnierkiewicz
No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: move check_dma_crc() to ide-dma.cBartlomiej Zolnierkiewicz
* Move check_dma_crc() to ide-dma.c and add inline version for CONFIG_BLK_DEV_IDEDMA=n case. * Rename check_dma_crc() to ide_check_dma_crc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove ide_auto_reduce_xfer()Bartlomiej Zolnierkiewicz
While at it: * Remove needless '!drive->crc_count' check. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: move drive->crc_count check out from check_dma_crc()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove ide_ata66_check()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove set_transfer()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: unexport SELECT_DRIVE()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-scsi: remove needless SELECT_DRIVE() callBartlomiej Zolnierkiewicz
SELECT_DRIVE() is called by IDE core code in start_request() before device driver's ->do_request method. In ide-scsi case ->do_request is implemented by idescsi_do_request() which is also the only user of idescsi_issue_pc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: use __ide_set_handler() in ide_execute_command()Bartlomiej Zolnierkiewicz
* Use __ide_set_handler() in ide_execute_command(). While at it: * Fix whitespace damage in ide_execute_command(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove SATA_*_REG macrosBartlomiej Zolnierkiewicz
* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of SATA_{ERROR,STATUS}_REG macros. * Remove no longer needed SATA_*_REG macros. While at it: * Remove needless SATA Status register read from sil_sata_reset_poll(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove ->nice0 and ->nice2 fields from ide_drive_tBartlomiej Zolnierkiewicz
* ->nice0 and ->nice2 ide_drive_t fields are always zero so remove them. * IDE_NICE_0 and IDE_NICE_2 defines from <linux/hdreg.h> are no longer used by any kernel code so cover them with #ifndef/#endif __KERNEL__. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: convert ->straight8 field in ide_hwif_t to bit flagBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove unused ->auto_poll field from ide_hwif_tBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-probe: remove needless Status register readsBartlomiej Zolnierkiewicz
* Cache value read from the Status register in 'stat' variable in do_probe() and enable_nest(), then remove remove needless Status register reads. While at it: * Add proper KERN_* levels to printk() calls. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-cris: use ide_execute_command()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02trm290: use ide_execute_command()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-scsi: use ide_execute_command()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-tape: use ide_execute_command()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: move create_proc_ide_drives() call to ide_device_add_all()Bartlomiej Zolnierkiewicz
* Un-static create_proc_ide_drives() and call it from ide_device_add_all(). While at it: * Rename create_proc_ide_drives() to ide_proc_port_register_devices(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: move hwif->present check out from ide_proc_register_port()Bartlomiej Zolnierkiewicz
Move hwif->present check out from ide_proc_register_port() to ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: factor out devices setup from ide_acpi_init()Bartlomiej Zolnierkiewicz
* Factor out devices setup from ide_acpi_init() to ide_acpi_port_init_devices(). * Call ide_acpi_port_init_devices() in ide_device_add_all(). While at it: * Remove no longer needed 'drive' field from struct ide_acpi_drive_link. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 05:46:35 +0000