aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-14markers: probe example, fix teardownMathieu Desnoyers
Need a marker_synchronize_unregister() before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: fix unregister bug and reenter bug, cleanupMathieu Desnoyers
Use the new rcu_read_lock_sched/unlock_sched() in marker code around the call site instead of preempt_disable/enable(). It helps reviewing the code more easily. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: marker_synchronize_unregister()Mathieu Desnoyers
Create marker_synchronize_unregister() which must be called before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracepoints: fix reentrancyMathieu Desnoyers
The tracepoints had the same problem markers did have wrt reentrancy. Apply a similar fix using a rcu_barrier after each tracepoint mutex lock. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracepoints: use rcu schedMathieu Desnoyers
Make tracepoints use rcu sched. (cleanup) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: fix unregister bug and reenter bugLai Jiangshan
unregister bug: codes using makers are typically calling marker_probe_unregister() and then destroying the data that marker_probe_func needs(or unloading this module). This is bug when the corresponding marker_probe_func is still running(on other cpus), it is using the destroying/ed data. we should call synchronize_sched() after marker_update_probes(). reenter bug: marker_probe_register(), marker_probe_unregister() and marker_probe_unregister_private_data() are not reentrant safe functions. these 3 functions release markers_mutex and then require it again and do "entry->oldptr = old; ...", but entry->oldptr maybe is using now for these 3 functions may reenter when markers_mutex is released. we use synchronize_sched() instead of call_rcu_sched() to fix this bug. actually we can do: " if (entry->rcu_pending) rcu_barrier_sched(); " after require markers_mutex again. but synchronize_sched() is better and simpler. For these 3 functions are not critical path. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86/ftrace: use uaccess in atomic contextFrédéric Weisbecker
With latest -tip I get this bug: [ 49.439988] in_atomic():0, irqs_disabled():1 [ 49.440118] INFO: lockdep is turned off. [ 49.440118] Pid: 2814, comm: modprobe Tainted: G W 2.6.27-rc7 #4 [ 49.440118] [<c01215e1>] __might_sleep+0xe1/0x120 [ 49.440118] [<c01148ea>] ftrace_modify_code+0x2a/0xd0 [ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa [ 49.440118] [<c016e80e>] __ftrace_update_code+0xfe/0x2f0 [ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa [ 49.440118] [<c016f190>] ftrace_convert_nops+0x50/0x80 [ 49.440118] [<c016f1d6>] ftrace_init_module+0x16/0x20 [ 49.440118] [<c015498b>] load_module+0x185b/0x1d30 [ 49.440118] [<c01767a0>] ? find_get_page+0x0/0xf0 [ 49.440118] [<c02463c0>] ? sprintf+0x0/0x30 [ 49.440118] [<c034e012>] ? mutex_lock_interruptible_nested+0x1f2/0x350 [ 49.440118] [<c0154eb3>] sys_init_module+0x53/0x1b0 [ 49.440118] [<c0352340>] ? do_page_fault+0x0/0x740 [ 49.440118] [<c0104012>] syscall_call+0x7/0xb [ 49.440118] ======================= It is because ftrace_modify_code() calls copy_to_user and copy_from_user. These functions have been inserted after guessing that there couldn't be any race condition but copy_[to/from]_user might sleep and __ftrace_update_code is called with local_irq_saved. These function have been inserted since this commit: d5e92e8978fd2574e415dc2792c5eb592978243d: "ftrace: x86 use copy from user function" Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86: suppress trivial sparse signedness warningsHarvey Harrison
Could just as easily change the three casts to cast to the correct type...this patch changes the type of ftrace_nop instead. Supresses sparse warnings: arch/x86/kernel/ftrace.c:157:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:157:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:157:14: got unsigned long *<noident> arch/x86/kernel/ftrace.c:161:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:161:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:161:14: got unsigned long *<noident> arch/x86/kernel/ftrace.c:165:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:165:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:165:14: got unsigned long *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: warn on failure to disable mcount callersSteven Rostedt
With the recent updates to ftrace, there should not be any failures when modifying the code. If there is, then we need to warn about it. This patch has a cleaned up version of the code that I used to discover that the weak symbols were causing failures. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: replace none tracer by nop tracerFrédéric Weisbecker
Replace "none" tracer by the recently created "nop" tracer. Both are pretty similar except that nop accepts TRACE_PRINT or TRACE_SPECIAL entries. And as a consequence, changing the size of the ring buffer now requires that tracing has already been disabled. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: tracing engine depends on Nop TracerFrédéric Weisbecker
Now that the nop tracer is used as the default tracer by replacing the "none" tracer, tracing engine depends on it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: make nop tracer reset previous entriesFrédéric Weisbecker
If nop tracer is selected, some old entries from the previous tracer could still be enqueued. Tracing have to be reset. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14trace: remove pointless ifdefsSteven Noonan
The functions are already 'extern' anyway, so there's no problem with linkage. Removing these ifdefs also helps find any potential compiler errors. Suggested by Andrew Morton. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: mcount_addr defined but not usedSteven Noonan
When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This patch eliminates that warning. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: add nop tracerSteven Noonan
A no-op tracer which can serve two purposes: 1. A template for development of a new tracer. 2. A convenient way to see ftrace_printk() calls without an irrelevant trace making the output messy. [ mingo@elte.hu: resolved conflicts ] Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: inject markers via trace_marker filePekka Paalanen
Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring buffer. The related file operations are derived from code by Frédéric Weisbecker <fweisbec@gmail.com>. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14mmiotrace: remove left-over marker cruftPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14mmiotrace: handle TRACE_PRINT entriesPekka Paalanen
Also make trace_seq_print_cont() non-static, and add a newline if the seq buffer can't hold all data. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86 mmiotrace: implement mmiotrace_printk()Pekka Paalanen
Offer mmiotrace users a function to inject markers from inside the kernel. This depends on the trace_vprintk() patch. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: add trace_vprintk()Pekka Paalanen
trace_vprintk() for easier implementation of tracer specific *_printk functions. Add check check for no_tracer, and implement __ftrace_printk() as a wrapper. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: move mmiotrace functions out of trace.cPekka Paalanen
Moves the mmiotrace specific functions from trace.c to trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(), and tracing_generic_entry_update() are therefore made available outside trace.c. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86 mmiotrace: fix a rare memory leakPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix unlocking of hashSteven Rostedt
This must be brown paper bag week for Steven Rostedt! While working on ftrace for PPC, I discovered that the hash locking done when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect. With a cut and paste error, I had the hash lock macro to lock for both hash_lock _and_ hash_unlock! This bug did not affect x86 since this bug was introduced when CONFIG_FTRACE_MCOUNT_RECORD was added to x86. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: use ftrace_release for all dynamic ftrace functionsSteven Rostedt
ftrace_release is necessary for all uses of dynamic ftrace and not just the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make it depend on DEBUG_KERNELIngo Molnar
make most of the tracers depend on DEBUG_KERNEL - that's their intended purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is not a practical limitation - but it simplifies the tracing menu in the normal case) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: sched_switch: show the wakee's cpuPeter Zijlstra
While profiling the smp behaviour of the scheduler it was needed to know to which cpu a task got woken. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make ftrace_printk usable with the other tracersPeter Zijlstra
Currently ftrace_printk only works with the ftrace tracer, switch it to an iter_ctrl setting so we can make us of them with other tracers too. [rostedt@redhat.com: tweak to the disable condition] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: print continue index fixSteven Rostedt
An item in the trace buffer that is bigger than one entry may be split up using the TRACE_CONT entry. This makes it a virtual single entry. The current code increments the iterator index even while traversing TRACE_CONT entries, making it look like the iterator is further than it actually is. This patch adds code to not increment the iterator index while skipping over TRACE_CONT entries. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: binary and not logical for continue testSteven Rostedt
Peter Zijlstra provided me with a nice brown paper bag while letting me know that I was doing a logical AND and not a binary one, making a condition true more often than it should be. Luckily, a false true is handled by the calling function and no harm is done. But this needs to be fixed regardless. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make output nicely spaced for up to 999 cpusMichael Ellerman
Currently some of the ftrace output goes skewiff if you have more than 9 cpus, and some if you have more than 99. Twiddle with the headers and format strings to make up to 999 cpus display without causing spacing problems. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14stack tracer: depends on DEBUG_KERNELIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: stack trace add indexesSteven Rostedt
This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: remove warning of old objcopy and local functionsSteven Rostedt
The warning messages about old objcopy and local functions spam the user quite drastically. Remove the warning until we can find a nicer way of tell the user to upgrade their objcopy. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: remove direct reference to mcount in trace codeSteven Rostedt
The mcount record method of ftrace scans objdump for references to mcount. Using mcount as the reference to test if the calls to mcount being replaced are indeed calls to mcount, this use of mcount was also caught as a location to change. Using a variable that points to the mcount address moves this reference into the data section that is not scanned, and we do not use a false location to try and modify. The warn on code was what was used to detect this bug. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: add stack tracerSteven Rostedt
This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14kbuild: ftrace: don't assume that scripts/recordmcount.pl is executableAndrew Morton
CHK include/linux/version.h CHK include/linux/utsrelease.h CC scripts/mod/empty.o /bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied We shouldn't assume that files have their `x' bits set. There are various ways in which file permissions get lost, including use of patch(1). It might not be correct to assume that perl lives in $PATH? Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: objcopy version test for local symbolsSteven Rostedt
The --globalize-symbols option came out in objcopy version 2.17. If the kernel is being compiled on a system with a lower version of objcopy, then we can not use the globalize / localize trick to link to symbols pointing to local functions. This patch tests the version of objcopy and will only use the trick if the version is greater than or equal to 2.17. Otherwise, if an object has only local functions within a section, it will give a nice warning and recommend the user to upgrade their objcopy. Leaving the symbols unrecorded is not that big of a deal, since the mcount record method changes the actual mcount code to be a simple "ret" without recording registers or anything. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: clean up macro usageIngo Molnar
enclose the argument in parenthesis. (especially since we cast it, which is a high prio operation) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix build failureStephen Rothwell
After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build failure surfaced: kernel/trace/ftrace.c: In function 'ftrace_record_ip': kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave' kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave' Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace: add necessary locking for ftrace records"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: x86 use copy to and from user functionsSteven Rostedt
The modification of code is performed either by kstop_machine, before SMP starts, or on module code before the module is executed. There is no reason to do the modifications from assembly. The copy to and from user functions are sufficient and produces cleaner and easier to read code. Thanks to Benjamin Herrenschmidt for suggesting the idea. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: handle weak symbol functionsSteven Rostedt
During tests and checks, I've discovered that there were failures to convert mcount callers into nops. Looking deeper into these failures, code that was attempted to be changed was not an mcount caller. The current code only updates if the code being changed is what it expects, but I still investigate any time there is a failure. What was happening is that a weak symbol was being used as a reference for other mcount callers. That weak symbol was also referenced elsewhere so the offsets were using the strong symbol and not the function symbol that it was referenced from. This patch changes the setting up of the mcount_loc section to search for a global function that is not weak. It will pick a local over a weak but if only a weak is found in a section, a warning is printed and the mcount location is not recorded (just to be safe). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: update recordmount.pl arch changesSteven Rostedt
I'm trying to keep all the arch changes in recordmcount.pl in one place. I moved your code into that area, by adding the flags to the commands that were passed in. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix build problem with CONFIG_FTRACEJeremy Fitzhardinge
I'm seeing when I use separate src/build dirs: make[3]: *** [arch/x86/kernel/time_32.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/irq_32.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/ldt.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/i8259.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory This fixes it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix incorrect comment style of __ftrace_enabled_save()Huang Ying
This patch fixes incorrect comment style of __ftrace_enabled_save(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: add necessary locking for ftrace recordsSteven Rostedt
The new design of pre-recorded mcounts and updating the code outside of kstop_machine has changed the way the records themselves are protected. This patch uses the ftrace_lock to protect the records. Note, the lock still does not need to be taken within calls that are only called via kstop_machine, since the that code can not run while the spin lock is held. Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is configured. Also did a slight cleanup of an unused variable. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: do not init module on ftrace disabledSteven Rostedt
If one of the self tests of ftrace has disabled the function tracer, do not run the code to convert the mcount calls in modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix some mistakes in error messagesFrédéric Weisbecker
This patch fixes some mistakes on the tracer in warning messages when debugfs fails to create tracing files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: srostedt@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: scripts/recordmcount.pl cross-build hackIngo Molnar
hack around: ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o objcopy: 'init/.tmp_mx_calibrate.o': No such file rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: ftrace_kill_atomic() build fixIngo Molnar
fix: kernel/built-in.o: In function `ftrace_dump': (.text+0x2e2ea): undefined reference to `ftrace_kill_atomic' Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: build fixIngo Molnar
fix: In file included from init/main.c:65: include/linux/ftrace.h:166: error: expected ‘,' or ‘;' before ‘{' token make[1]: *** [init/main.o] Error 1 make: *** [init/main.o] Error 2 Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:23:22 +0000