aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-08-20orinoco: remove spare whitespaceDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix leaks of wdev->conn->ieDavid Kilroy
This only occurs in the following error situations: - driver calls connect_result with failure - error scheduling authentication on connect - error initiating scan (to get BSSID and channel) on connect - userspace calls disconnect while in the SCANNING or SCAN_AGAIN states Signed-off-by: David Kilroy <kilroyd@googlemail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ar9170: refactor configure_filterChristian Lamparter
Thanks to "mac80211: allow configure_filter callback to sleep", we no longer have to defer the work to the workqueue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Two small spec updatesGábor Stefanik
The specs are beginning to support rev3 LP-PHYs - implement one of the changes needed for rev3 support. Also, in the new MIPS driver, the "Japan TX filter" was renamed to "analog TX filter init" - however, calling it "init" is confusing, so name it "set analog filter", with a comment for easier future identification. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: bss_info_changed() callback is allowed to sleepIvo van Doorn
The bss_info_changed() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver directly. Additionaly this makes the DRIVER_REQUIRE_SCHEDULED flag redundant so it can be removed. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: configure_filter() callback is allowed to sleepIvo van Doorn
The configure_filter() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver configure_filter() directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix dangling scan request checkingJohannes Berg
My patch "cfg80211: fix deadlock" broke the code it was supposed to fix, the scan request checking. But it's not trivial to put it back the way it was, since the original patch had a deadlock. Now do it in a completely new way: queue the check off to a work struct, where we can freely lock. But that has some more complications, like needing to wait for it to be done before the wiphy/rdev can be destroyed, so some code is required to handle that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ipw2x00: fix sparse warningsReinette Chatre
This fixes: CHECK drivers/net/wireless/ipw2x00/ipw2100.c drivers/net/wireless/ipw2x00/ipw2100.c:7888:22: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:7952:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8000:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here CC [M] drivers/net/wireless/ipw2x00/ipw2100.o CHECK drivers/net/wireless/ipw2x00/ipw2200.c drivers/net/wireless/ipw2x00/ipw2200.c:847:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:891:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:935:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:980:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1016:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1051:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1823:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6228:28: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6369:20: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6857:12: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:7964:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8720:12: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9662:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9720:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9826:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:10318:21: warning: symbol 'remaining_bytes' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:10184:13: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8338:45: warning: cast to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: expected restricted __le16 [usertype] size drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: expected restricted __le16 [usertype] tx_rates drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: got unsigned short [unsigned] [usertype] rates_mask drivers/net/wireless/ipw2x00/ipw2200.c:6124:29: warning: bad assignment (>>=) to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6130:31: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6140:23: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6149:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6154:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6159:55: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: warning: invalid assignment: |= drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: right side has type unsigned short drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: expected signed char [signed] [usertype] [explicitly-signed] rt_dbmnoise drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: got restricted __le16 [usertype] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: expected signed char [signed] [usertype] [explicitly-signed] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: got restricted __le16 [usertype] noise Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mac80211: New stat counters for multicast and unicast forwarded framesDaniel Walker
This expands on the current fwded_frames stat counter which should be equal to the total of these two new counters. The new counters are called "fwded_mcast" and "fwded_unicast". Signed-off-by: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20wl1271: remove print_mac usageJohn W. Linville
CC [M] drivers/net/wireless/wl12xx/wl1271_main.o drivers/net/wireless/wl12xx/wl1271_main.c: In function ‘wl1271_op_add_interface’: drivers/net/wireless/wl12xx/wl1271_main.c:611: warning: ‘print_mac’ is deprecated (declared at include/linux/if_ether.h:142) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rc80211_pid_algo.c: remove unused variable declarationJohn W. Linville
CC [M] net/mac80211/rc80211_pid_algo.o net/mac80211/rc80211_pid_algo.c: In function ‘rate_control_pid_rate_init’: net/mac80211/rc80211_pid_algo.c:304: warning: unused variable ‘si’ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath: move regulatory info into shared common structureLuis R. Rodriguez
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Fix TX poll cancellingSujith
In ath9k_stop(), tx_complete_work was being cancelled twice. This patch fixes it. Also, locking sc->mutex should be done at the beginning. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20wl1251: halt the embedded CPU before loading firmwareBob Copeland
After initial power-up, the embedded cpu is usually halted. However, if we down the interface and only do a soft reset before bringing the interface back up, it will still be running and the firmware loading code will bail out. This change halts the CPU before loading the firmware, enabling a second call to wl1251_boot() to succeed without a hard reset. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mac80211: Decouple fail_avg stats used by mesh from rate control algorithm.Javier Cardona
Mesh uses the tx failure average to compute the (m)path metric. This used to be done inside the rate control module. This patch breaks the dependency between the mesh stack and the rate control algorithm. Mesh will now work independently of the chosen rate control algorithm. The mesh stack keeps a moving average of the average transmission losses for each mesh peer station. If the fail average exceeds a certain threshold, the peer link is marked as broken. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: Add support for retry ratesBenoit PAPILLAULT
rt2800pci can handle different retry rates, it will always step 1 rate down after a failed transmission so creating the retry rate list for mac80211 is quite simple. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: Fix MCS register intializationIvo van Doorn
According to the original Ralink driver, LG_FBK_CFG0_OFDMMCS2FBK should be initialized to 9 rather then 3. Based on a patch for rt2800pci from Benoit Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: wireless CLI ID and packet ID must not be 0Ivo van Doorn
In the TX descriptor the Packet ID must not be 0, so add 1 to the ID. The wireless CLI ID is not allowed to be 0 either, but also must be initialized with the wcid value rather then keyid. Based on a patch for rt2800pci from Benoit Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: Set SKBDESC_L2_PADDED in RX pathIvo van Doorn
When the RX descriptor indicates the frame was L2 padded, the SKBDESC_L2_PADDED flag should be set to make sure the L2 padding is removed before it is send to mac80211. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: Add new RF chip definesIvo van Doorn
Add new defines for RF chipsets which can be found by the driver. We don't have to check for these chips specifically yet, but it is better to have the defines in now. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: Fix for rt2800usb for SHARED_KEY_TABLE initializationsIvo van Doorn
Fixed comments about SHARED_KEY_TABLE_BASE and SHARED_KEY_MODE_BASE. Fixed initialization loop for SHARED_KEY_MODE_ENTRY. Based on a patch for rt2800pci from Benoit. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: Fix RFKILL pollingIvo van Doorn
The rfkill_poll callback function in the drivers check a bit to see if the RFKILL key has been pressed. However when the bit is set it means the radio is active and the device can be used. The wiphy_rfkill_set_hw_state() function expects the inversed, so '1' must be send when the radio must be disabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Fix setting TX power control mode during RC calibrationGábor Stefanik
Call set_tx_power_control with a LPPHY_TXPCTL rather than an LPPHY_TX_PWR_CTL_CMD_MODE. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Fix reading old mode in the set TX power control routineGábor Stefanik
Check the mode the hardware is in, not the mode we used the last time. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20wl1251: correct definitions for 0th bit definesBob Copeland
ACX_SLV_SOFT_RESET_BIT and ACX_REG_EEPROM_START_BIT are both defined as "1" in the vendor driver code, but they were defined to be BIT(1) ("2") here. The SOFT_RESET typo ensures that wl1251_boot_soft_reset() doesn't; as a result the device hangs when trying to reprogram the PLL registers while running. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mac80211: remove deprecated APIJohannes Berg
All but two drivers have now stopped using the two deprecated members radio_enabled and beacon_int, so it's about time to remove them for good. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mac80211: allow configure_filter callback to sleepJohannes Berg
Over time, a whole bunch of drivers have come up with their own scheme to delay the configure_filter operation to a workqueue. To be able to simplify things, allow configure_filter to sleep, and add a new prepare_multicast callback that drivers that need the multicast address list implement. This new callback must be atomic, but most drivers either don't care or just calculate a hash which can be done atomically and then uploaded to the hardware non-atomically. A cursory look suggests that at76c50x-usb, ar9170, mwl8k (which is actually very broken now), rt2x00, wl1251, wl1271 and zd1211 should make use of this new capability. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: report userspace SME connected event properlyJohannes Berg
Instead of hacking the event reporting into the __cfg80211_connect_result() function which is also invoked by others, set up things correctly and then invoke that function, so that it can do more sanity checking. Also, it is currently not possible to get a ROAMED event from the userspace SME anyway since we send out a DISCONNECTED event when it disassociates and then a new CONNECTED event on the next association. Thanks to Zhu Yi for pointing out that the code is somewhat convoluted and doesn't warn when it should. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Remove BROKEN from B43_PHY_LPGábor Stefanik
Larry has reported success getting scan data with an LP-PHY device, so it's probably time to release LP-PHY support for testing. Also disable 802.11a support for now, as 802.11a currently causes the driver to panic on startup (NULL pointer dereference). Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Update B2062 radio init with recent spec changesGábor Stefanik
The spec for initializing the B2062 radio have changed recently, update the code to match the changes. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Fix a bug in the B2062 channel tune pathGábor Stefanik
I missed the "+16" part of the instruction in the specs. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Update code for spec fixes, and fix a few typosGábor Stefanik
A few typos have been discovered in both the specs and the code. This patch fixes them. Also use lpphy_op_switch_channel consistently, and make all users of it print its return value for easier debugging. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Fix a spec error in the B2062 channel switch routineGábor Stefanik
The channel switch routine had a whole instruction missing. Add it. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix deadlockJohannes Berg
When removing an interface with nl80211, cfg80211 will deadlock in the netdev notifier because we're already holding rdev->mtx and try to acquire it again to verify the scan has been done. This bug was introduced by my patch "cfg80211: check for and abort dangling scan requests". To fix this, move the dangling scan request check into wiphy_unregister(). This will not be able to catch all cases right away, but if the scan problem happens with a manual ifdown or so it will be possible to remedy it by removing the module/device. Additionally, add comments about the deadlock scenario. Reported-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Christian Lamparter <chunkeey@web.de> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Update baseband init for recent spec changesGábor Stefanik
The spec had some nasty typos, and a large part of the rev0/1 BB init procedure was also missing. Fix these. Also make the init-time channel switch debuggable. (The change from -EINVAL to -EIO is simply to make it possible to distinguish the PLL charge pump error from a channel-not-found error.) Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: Handle B43_PHYTYPE_LP in RX pathGábor Stefanik
Don't drop all packets received from an LP-PHY with WARN_ON. Also update a comment with LP-specific information. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Fix another TX power control abuseGábor Stefanik
This should fix the remaining WARN_ON. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Update TX gain override for a spec typo fixGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Don't adjust gain table for rev2+ when setting channelGábor Stefanik
Rev2+ never needs to have gain tables adjusted according to the spec. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: Make LP-PHY testableGábor Stefanik
-Enable rate memory init for LP-PHY (same as G and N-PHY). -Mark rev.2 LP-PHYs with the B2063 radio as supported. -Allow using the 5GHz band on LP-PHYs. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: Add LP-PHY firmware loading supportGábor Stefanik
Add support for loading LP-PHY firmware to b43_try_request_fw. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ssb: Fix typo in the rev8 SPROM extraction routineGábor Stefanik
No comment. :-) Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20p54: disable PS by defaultChristian Lamparter
Johannes kindly pointed out that I completely missed a hunk in his patch: "[PATCH] cfg80211: allow driver to override PS default". The driver must explicitly set ps_default to false, as the setting is pre-filled with the kconfig default. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Updates for AR9287_12 version of chipset.Vivek Natarajan
Enable AsyncFIFO and AGGWEP for AR9287_12 and later revisions only. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Fix ref power interpolation logic for AR9287 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Enable LEDs for AR9287 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Set AR_WA for AR9287 as it improves consistency in throughput.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Add open loop power control support for AR9287.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Implement channel switching for rev0/1/B2062 radioGábor Stefanik
-Move pdiv from lpphy_2062_init to struct b43_phy_lp. -Add channel table for the B2062 radio. -Add code for tuning the B2062 radio to channel. -Add error handling to op_switch_channel, and use it for both radios. Rev0/1/B2062 will now hopefully show some signs of life, though it won't work at full performance, as calibration is still missing. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Implement channel switching for rev2+/B2063 radioGábor Stefanik
Rev.2+/B2063 will now hopefully show some signs of life, though it won't work at full performance, as calibration is still missing. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-22 17:59:48 +0000