aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-22smack: do not beyond ARRAY_SIZE of dataRoel Kluin
Do not go beyond ARRAY_SIZE of data Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22integrity: move ima_counts_getMimi Zohar
Based on discussion on lkml (Andrew Morton and Eric Paris), move ima_counts_get down a layer into shmem/hugetlb__file_setup(). Resolves drm shmem_file_setup() usage case as well. HD comment: I still think you're doing this at the wrong level, but recognize that you probably won't be persuaded until a few more users of alloc_file() emerge, all wanting your ima_counts_get(). Resolving GEM's shmem_file_setup() is an improvement, so I'll say Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22integrity: path_check updateMimi Zohar
- Add support in ima_path_check() for integrity checking without incrementing the counts. (Required for nfsd.) - rename and export opencount_get to ima_counts_get - replace ima_shm_check calls with ima_counts_get - export ima_path_check Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22IMA: Add __init notation to ima functionsEric Paris
A number of IMA functions only used during init are not marked with __init. Add those notations so they are freed automatically. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22IMA: Minimal IMA policy and boot param for TCB IMA policyEric Paris
The IMA TCB policy is dangerous. A normal use can use all of a system's memory (which cannot be freed) simply by building and running lots of executables. The TCB policy is also nearly useless because logging in as root often causes a policy violation when dealing with utmp, thus rendering the measurements meaningless. There is no good fix for this in the kernel. A full TCB policy would need to be loaded in userspace using LSM rule matching to get both a protected and useful system. But, if too little is measured before userspace can load a real policy one again ends up with a meaningless set of measurements. One option would be to put the policy load inside the initrd in order to get it early enough in the boot sequence to be useful, but this runs into trouble with the LSM. For IMA to measure the LSM policy and the LSM policy loading mechanism it needs rules to do so, but we already talked about problems with defaulting to such broad rules.... IMA also depends on the files being measured to be on an FS which implements and supports i_version. Since the only FS with this support (ext4) doesn't even use it by default it seems silly to have any IMA rules by default. This should reduce the performance overhead of IMA to near 0 while still letting users who choose to configure their machine as such to inclue the ima_tcb kernel paramenter and get measurements during boot before they can load a customized, reasonable policy in userspace. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-19selinux: remove obsolete read buffer limit from sel_read_boolStephen Smalley
On Tue, 2009-05-19 at 00:05 -0400, Eamon Walsh wrote: > Recent versions of coreutils have bumped the read buffer size from 4K to > 32K in several of the utilities. > > This means that "cat /selinux/booleans/xserver_object_manager" no longer > works, it returns "Invalid argument" on F11. getsebool works fine. > > sel_read_bool has a check for "count > PAGE_SIZE" that doesn't seem to > be present in the other read functions. Maybe it could be removed? Yes, that check is obsoleted by the conversion of those functions to using simple_read_from_buffer(), which will reduce count if necessary to what is available in the buffer. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-19SELinux: move SELINUX_MAGIC into magic.hEric Paris
The selinuxfs superblock magic is used inside the IMA code, but is being defined in two places and could someday get out of sync. This patch moves the declaration into magic.h so it is only done once. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-15IMA: do not measure everything opened by root by defaultEric Paris
The IMA default policy measures every single file opened by root. This is terrible for most users. Consider a system (like mine) with virtual machine images. When those images are touched (which happens at boot for me) those images are measured. This is just way too much for the default case. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-15IMA: remove read permissions on the ima policy fileEric Paris
The IMA policy file does not implement read. Trying to just open/read/close the file will load a blank policy and you cannot then change the policy without a reboot. This removes the read permission from the file so one must at least be attempting to write... Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-14TPM: get_event_name stack corruptionEric Paris
get_event_name uses sprintf to fill a buffer declared on the stack. It fills the buffer 2 bytes at a time. What the code doesn't take into account is that sprintf(buf, "%02x", data) actually writes 3 bytes. 2 bytes for the data and then it nul terminates the string. Since we declare buf to be 40 characters long and then we write 40 bytes of data into buf sprintf is going to write 41 characters. The fix is to leave room in buf for the nul terminator. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-12securityfs: securityfs_remove should handle IS_ERR pointersEric Paris
Both of the securityfs users (TPM and IMA) can call securityfs_remove and pass an IS_ERR(dentry) in their failure paths. This patch handles those rather than panicing when it tries to start deferencing some negative memory. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-12IMA: open all files O_LARGEFILEEric Paris
If IMA tried to measure a file which was larger than 4G dentry_open would fail with -EOVERFLOW since IMA wasn't passing O_LARGEFILE. This patch passes O_LARGEFILE to all IMA opens to avoid this problem. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-12IMA: Handle dentry_open failuresEric Paris
Currently IMA does not handle failures from dentry_open(). This means that we leave a pointer set to ERR_PTR(errno) and then try to use it just a few lines later in fput(). Oops. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-12IMA: use current_cred() instead of current->credEric Paris
Proper invocation of the current credentials is to use current_cred() not current->cred. This patches makes IMA use the new method. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-11CRED: Guard the setprocattr security hook against ptraceDavid Howells
Guard the setprocattr security hook against ptrace by taking the target task's cred_guard_mutex around it. The problem is that setprocattr() may otherwise note the lack of a debugger, and then perform an action on that basis whilst letting a debugger attach between the two points. Holding cred_guard_mutex across the test and the action prevents ptrace_attach() from doing that. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-11CRED: Rename cred_exec_mutex to reflect that it's a guard against ptraceDavid Howells
Rename cred_exec_mutex to reflect that it's a guard against foreign intervention on a process's credential state, such as is made by ptrace(). The attachment of a debugger to a process affects execve()'s calculation of the new credential state - _and_ also setprocattr()'s calculation of that state. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-08Merge branch 'master' into nextJames Morris
2009-05-07NOMMU: Don't check vm_region::vm_start is page aligned in add_nommu_region()David Howells
Don't check vm_region::vm_start is page aligned in add_nommu_region() because the region may reflect some non-page-aligned mapped file, such as could be obtained from RomFS XIP. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: remove rd%d links immediately after stopping an array. md: remove ability to explicit set an inactive array to 'clean'. md: constify VFTs md: tidy up status_resync to handle large arrays. md: fix some (more) errors with bitmaps on devices larger than 2TB. md/raid10: don't clear bitmap during recovery if array will still be degraded. md: fix loading of out-of-date bitmap.
2009-05-07random: make get_random_int() more randomLinus Torvalds
It's a really simple patch that basically just open-codes the current "secure_ip_id()" call, but when open-coding it we now use a _static_ hashing area, so that it gets updated every time. And to make sure somebody can't just start from the same original seed of all-zeroes, and then do the "half_md4_transform()" over and over until they get the same sequence as the kernel has, each iteration also mixes in the same old "current->pid + jiffies" we used - so we should now have a regular strong pseudo-number generator, but we also have one that doesn't have a single seed. Note: the "pid + jiffies" is just meant to be a tiny tiny bit of noise. It has no real meaning. It could be anything. I just picked the previous seed, it's just that now we keep the state in between calls and that will feed into the next result, and that should make all the difference. I made that hash be a per-cpu data just to avoid cache-line ping-pong: having multiple CPU's write to the same data would be fine for randomness, and add yet another layer of chaos to it, but since get_random_int() is supposed to be a fast interface I did it that way instead. I considered using "__raw_get_cpu_var()" to avoid any preemption overhead while still getting the hash be _mostly_ ping-pong free, but in the end good taste won out. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) i.MX31: Disable CPU_32v6K in mx3_defconfig. mx3fb: Fix compilation with CONFIG_PM mx27ads: move PBC mapping out of vmalloc space MXC: remove BUG_ON in interrupt handler mx31: remove mx31moboard_defconfig ARM: ARCH_MXC should select HAVE_CLK mxc : BUG in imx_dma_request mxc : Clean up properly when imx_dma_free() used without imx_dma_disable() [ARM] mv78xx0: update defconfig [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". [ARM] S3C2412: Add missing cache flush in suspend code [ARM] S3C: Add UDIVSLOT support for newer UARTS [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
2009-05-07[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation typesPaul Gortmaker
From: Bruce Ashfield <bruce.ashfield@windriver.com> To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: David Borman <david.borman@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07[ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)Kevin Hilman
As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use DMA_BIT_MASK(n) Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07md: remove rd%d links immediately after stopping an array.NeilBrown
md maintains link in sys/mdXX/md/ to identify which device has which role in the array. e.g. rd2 -> dev-sda indicates that the device with role '2' in the array is sda. These links are only present when the array is active. They are created immediately after ->run is called, and so should be removed immediately after ->stop is called. However they are currently removed a little bit later, and it is possible for ->run to be called again, thus adding these links, before they are removed. So move the removal earlier so they are consistently only present when the array is active. Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07md: remove ability to explicit set an inactive array to 'clean'.NeilBrown
Being able to write 'clean' to an 'array_state' of an inactive array to activate it in 'clean' mode is both unnecessary and inconvenient. It is unnecessary because the same can be achieved by writing 'active'. This activates and array, but it still remains 'clean' until the first write. It is inconvenient because writing 'clean' is more often used to cause an 'active' array to revert to 'clean' mode (thus blocking any writes until a 'write-pending' is promoted to 'active'). Allowing 'clean' to both activate an array and mark an active array as clean can lead to races: One program writes 'clean' to mark the active array as clean at the same time as another program writes 'inactive' to deactivate (stop) and active array. Depending on which writes first, the array could be deactivated and immediately reactivated which isn't what was desired. So just disable the use of 'clean' to activate an array. This avoids a race that can be triggered with mdadm-3.0 and external metadata, so it suitable for -stable. Reported-by: Rafal Marszewski <rafal.marszewski@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: <stable@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07md: constify VFTsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07md: tidy up status_resync to handle large arrays.NeilBrown
Two problems in status_resync. 1/ It still used Kilobytes as the basic block unit, while most code now uses sectors uniformly. 2/ It doesn't allow for the possibility that max_sectors exceeds the range of "unsigned long". So - change "max_blocks" to "max_sectors", and store sector numbers in there and in 'resync' - Make 'rt' a 'sector_t' so it can temporarily hold the number of remaining sectors. - use sector_div rather than normal division. - change the magic '100' used to preserve precision to '32'. + making it a power of 2 makes division easier + it doesn't need to be as large as it was chosen when we averaged speed over the entire run. Now we average speed over the last 30 seconds or so. Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07md: fix some (more) errors with bitmaps on devices larger than 2TB.NeilBrown
If a write intent bitmap covers more than 2TB, we sometimes work with values beyond 32bit, so these need to be sector_t. This patches add the required casts to some unsigned longs that are being shifted up. This will affect any raid10 larger than 2TB, or any raid1/4/5/6 with member devices that are larger than 2TB. Signed-off-by: NeilBrown <neilb@suse.de> Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE> Cc: stable@kernel.org
2009-05-07md/raid10: don't clear bitmap during recovery if array will still be degraded.NeilBrown
If we have a raid10 with multiple missing devices, and we recover just one of these to a spare, then we risk (depending on the bitmap and array chunk size) clearing bits of the bitmap for which recovery isn't complete (because a device is still missing). This can lead to a subsequent "re-add" being recovered without any IO happening, which would result in loss of data. This patch takes the safe approach of not clearing bitmap bits if the array will still be degraded. This patch is suitable for all active -stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07md: fix loading of out-of-date bitmap.NeilBrown
When md is loading a bitmap which it knows is out of date, it fills each page with 1s and writes it back out again. However the write_page call makes used of bitmap->file_pages and bitmap->last_page_size which haven't been set correctly yet. So this can sometimes fail. Move the setting of file_pages and last_page_size to before the call to write_page. This bug can cause the assembly on an array to fail, thus making the data inaccessible. Hence I think it is a suitable candidate for -stable. Cc: stable@kernel.org Reported-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-06drivers/base/iommu.c: add missing includesAndrew Morton
Fix zillions of -mm x86_64 allmodconfig build errors - the file uses EXPORT_SYMBOL() and kmalloc but misses the needed includes. Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06initramfs: clean up messages related to initramfs unpackingEric Piel
With the removal of duplicate unpack_to_rootfs() (commit df52092f3c97788592ef72501a43fb7ac6a3cfe0) the messages displayed do not actually correspond to what the kernel is doing. In addition, depending if ramdisks are supported or not, the messages are not at all the same. So keep the messages more in sync with what is really doing the kernel, and only display a second message in case of failure. This also ensure that the printk message cannot be split by other printk's. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06nommu: make the initial mmap allocation excess behaviour Kconfig configurableDavid Howells
NOMMU mmap() has an option controlled by a sysctl variable that determines whether the allocations made by do_mmap_private() should have the excess space trimmed off and returned to the allocator. Make the initial setting of this variable a Kconfig configuration option. The reason there can be excess space is that the allocator only allocates in power-of-2 size chunks, but mmap()'s can be made in sizes that aren't a power of 2. There are two alternatives: (1) Keep the excess as dead space. The dead space then remains unused for the lifetime of the mapping. Mappings of shared objects such as libc, ld.so or busybox's text segment may retain their dead space forever. (2) Return the excess to the allocator. This means that the dead space is limited to less than a page per mapping, but it means that for a transient process, there's more chance of fragmentation as the excess space may be reused fairly quickly. During the boot process, a lot of transient processes are created, and this can cause a lot of fragmentation as the pagecache and various slabs grow greatly during this time. By turning off the trimming of excess space during boot and disabling batching of frees, Coldfire can manage to boot. A better way of doing things might be to have /sbin/init turn this option off. By that point libc, ld.so and init - which are all long-duration processes - have all been loaded and trimmed. Reported-by: Lanttor Guo <lanttor.guo@freescale.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Lanttor Guo <lanttor.guo@freescale.com> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06nommu: clamp zone_batchsize() to 0 under NOMMU conditionsDavid Howells
Clamp zone_batchsize() to 0 under NOMMU conditions to stop free_hot_cold_page() from queueing and batching frees. The problem is that under NOMMU conditions it is really important to be able to allocate large contiguous chunks of memory, but when munmap() or exit_mmap() releases big stretches of memory, return of these to the buddy allocator can be deferred, and when it does finally happen, it can be in small chunks. Whilst the fragmentation this incurs isn't so much of a problem under MMU conditions as userspace VM is glued together from individual pages with the aid of the MMU, it is a real problem if there isn't an MMU. By clamping the page freeing queue size to 0, pages are returned to the allocator immediately, and the buddy detector is more likely to be able to glue them together into large chunks immediately, and fragmentation is less likely to occur. By disabling batching of frees, and by turning off the trimming of excess space during boot, Coldfire can manage to boot. Reported-by: Lanttor Guo <lanttor.guo@freescale.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Lanttor Guo <lanttor.guo@freescale.com> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06mm: use roundown_pow_of_two() in zone_batchsize()David Howells
Use roundown_pow_of_two(N) in zone_batchsize() rather than (1 << (fls(N)-1)) as they are equivalent, and with the former it is easier to see what is going on. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Lanttor Guo <lanttor.guo@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06isl29003: fix resume functionalityDaniel Mack
The isl29003 does not interpret the return value of i2c_smbus_write_byte_data() correctly and hence causes an error on system resume. Also introduce power_state_before_suspend and restore the chip's power state upon wakeup. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06fbdev: remove makefile reference to removed driverKrzysztof Helt
The cyblafb driver is removed so remove its last trace in the makefile. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06alloc_vmap_area: fix memory leakRalph Wuerthner
If alloc_vmap_area() fails the allocated struct vmap_area has to be freed. Signed-off-by: Ralph Wuerthner <ralphw@linux.vnet.ibm.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06doc: small kernel-parameters updatesRandy Dunlap
Change last "i386" to X86-32 as is used throughout the rest of the file. Change combination of X86-32,X86-64 to just X86, as is done throughout the rest of the file. Add a note that hyphens and underscores are equivalent in parameter names, with examples. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jan Engelhardt <jengelh@medozas.de> Cc: Christopher Sylvain <chris.sylvain@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06fbdev: fix fillrect for 24bpp modesMichal Januszewski
The software fillrect routines do not work properly when the number of pixels per machine word is not an integer. To see that, run the following command on a fbdev console with a 24bpp video mode, using a non-accelerated driver such as (u)vesafb: reset ; echo -e '\e[41mtest\e[K' The expected result is 'test' displayed on a line with red background. Instead of that, 'test' has a red background, but the rest of the line (rendered using fillrect()) contains a distored colorful pattern. This patch fixes the problem by correctly computing rotation shifts. It has been tested in a 24bpp mode on 32- and 64-bit little-endian machines. Signed-off-by: Michal Januszewski <spock@gentoo.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06oom: prevent livelock when oom_kill_allocating_task is setDavid Rientjes
When /proc/sys/vm/oom_kill_allocating_task is set for large systems that want to avoid the lengthy tasklist scan, it's possible to livelock if current is ineligible for oom kill. This normally happens when it is set to OOM_DISABLE, but is also possible if any threads are sharing the same ->mm with a different tgid. So change __out_of_memory() to fall back to the full task-list scan if it was unable to kill `current'. Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06fiemap: fix problem with setting FIEMAP_EXTENT_LASTJosef Bacik
Fix a problem where the generic block based fiemap stuff would not properly set FIEMAP_EXTENT_LAST on the last extent. I've reworked things to keep track if we go past the EOF, and mark the last extent properly. The problem was reported by and tested by Eric Sandeen. Tested-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-btrfs@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <Joel.Becker@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06Eliminate thousands of warnings with gcc 3.2 buildAndi Kleen
When building with gcc 3.2 I get thousands of warnings such as include/linux/gfp.h: In function `allocflags_to_migratetype': include/linux/gfp.h:105: warning: null format string due to passing a NULL format string to warn_slowpath() in #define __WARN() warn_slowpath(__FILE__, __LINE__, NULL) Split this case out into a separate call. This also shrinks the kernel slightly: text data bss dec hex filename 4802274 707668 712704 6222646 5ef336 vmlinux text data bss dec hex filename 4799027 703572 712704 6215303 5ed687 vmlinux due to removeing one argument from the commonly-called __WARN(). [akpm@linux-foundation.org: reduce scope of `empty'] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06doc: hashdist defaults on for 64bitHugh Dickins
kernel boot parameter `hashdist' now defaults on for all 64bit NUMA. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06inotify: use GFP_NOFS in kernel_event() to work around a lockdep false-positiveWu Fengguang
There is what we believe to be a false positive reported by lockdep. inotify_inode_queue_event() => take inotify_mutex => kernel_event() => kmalloc() => SLOB => alloc_pages_node() => page reclaim => slab reclaim => dcache reclaim => inotify_inode_is_dead => take inotify_mutex => deadlock The plan is to fix this via lockdep annotation, but that is proving to be quite involved. The patch flips the allocation over to GFP_NFS to shut the warning up, for the 2.6.30 release. Hopefully we will fix this for real in 2.6.31. I'll queue a patch in -mm to switch it back to GFP_KERNEL so we don't forget. ================================= [ INFO: inconsistent lock state ] 2.6.30-rc2-next-20090417 #203 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/380 [HC0[0]:SC0[0]:HE1:SE1] takes: (&inode->inotify_mutex){+.+.?.}, at: [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0 {RECLAIM_FS-ON-W} state was registered at: [<ffffffff81079188>] mark_held_locks+0x68/0x90 [<ffffffff810792a5>] lockdep_trace_alloc+0xf5/0x100 [<ffffffff810f5261>] __kmalloc_node+0x31/0x1e0 [<ffffffff81130652>] kernel_event+0xe2/0x190 [<ffffffff81130826>] inotify_dev_queue_event+0x126/0x230 [<ffffffff8112f096>] inotify_inode_queue_event+0xc6/0x110 [<ffffffff8110444d>] vfs_create+0xcd/0x140 [<ffffffff8110825d>] do_filp_open+0x88d/0xa20 [<ffffffff810f6b68>] do_sys_open+0x98/0x140 [<ffffffff810f6c50>] sys_open+0x20/0x30 [<ffffffff8100c272>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 690455 hardirqs last enabled at (690455): [<ffffffff81564fe4>] _spin_unlock_irqrestore+0x44/0x80 hardirqs last disabled at (690454): [<ffffffff81565372>] _spin_lock_irqsave+0x32/0xa0 softirqs last enabled at (690178): [<ffffffff81052282>] __do_softirq+0x202/0x220 softirqs last disabled at (690157): [<ffffffff8100d50c>] call_softirq+0x1c/0x50 other info that might help us debug this: 2 locks held by kswapd0/380: #0: (shrinker_rwsem){++++..}, at: [<ffffffff810d0bd7>] shrink_slab+0x37/0x180 #1: (&type->s_umount_key#17){++++..}, at: [<ffffffff8110cfbf>] shrink_dcache_memory+0x11f/0x1e0 stack backtrace: Pid: 380, comm: kswapd0 Not tainted 2.6.30-rc2-next-20090417 #203 Call Trace: [<ffffffff810789ef>] print_usage_bug+0x19f/0x200 [<ffffffff81018bff>] ? save_stack_trace+0x2f/0x50 [<ffffffff81078f0b>] mark_lock+0x4bb/0x6d0 [<ffffffff810799e0>] ? check_usage_forwards+0x0/0xc0 [<ffffffff8107b142>] __lock_acquire+0xc62/0x1ae0 [<ffffffff810f478c>] ? slob_free+0x10c/0x370 [<ffffffff8107c0a1>] lock_acquire+0xe1/0x120 [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0 [<ffffffff81562d43>] mutex_lock_nested+0x63/0x420 [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0 [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0 [<ffffffff81012fe9>] ? sched_clock+0x9/0x10 [<ffffffff81077165>] ? lock_release_holdtime+0x35/0x1c0 [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0 [<ffffffff8110c9dc>] dentry_iput+0xbc/0xe0 [<ffffffff8110cb23>] d_kill+0x33/0x60 [<ffffffff8110ce23>] __shrink_dcache_sb+0x2d3/0x350 [<ffffffff8110cffa>] shrink_dcache_memory+0x15a/0x1e0 [<ffffffff810d0cc5>] shrink_slab+0x125/0x180 [<ffffffff810d1540>] kswapd+0x560/0x7a0 [<ffffffff810ce160>] ? isolate_pages_global+0x0/0x2c0 [<ffffffff81065a30>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8107953d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810d0fe0>] ? kswapd+0x0/0x7a0 [<ffffffff8106555b>] kthread+0x5b/0xa0 [<ffffffff8100d40a>] child_rip+0xa/0x20 [<ffffffff8100cdd0>] ? restore_args+0x0/0x30 [<ffffffff81065500>] ? kthread+0x0/0xa0 [<ffffffff8100d400>] ? child_rip+0x0/0x20 [eparis@redhat.com: fix audit too] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matt Mackall <mpm@selenic.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Eric Paris <eparis@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06jsm: removing unused spinlockBreno Leitao
This patch removes bd_lock spinlock (inside jsm_board structure). The lock is initialized in the probe function and not used anymore. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06vt: Add a note on the historical abuse of CLOCK_TICK_RATEAlan Cox
This is one area where we can't just magic away the bizarre use of CLOCK_TICK_RATE as it leaks to user space APIs. It also means the visible CLOCK_TICK_RATE is frozen for architectures which is horrible. We need to fix this somehow Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06integrity: remove __setup auditing msgsMimi Zohar
Remove integrity audit messages from __setup() Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-06integrity: use audit_log_stringMimi Zohar
Based on a request from Eric Paris to simplify parsing, replace audit_log_format statements containing "%s" with audit_log_string(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-05-06integrity: lsm audit rule matching fixMimi Zohar
An audit subsystem change replaced AUDIT_EQUAL with Audit_equal. Update calls to security_filter_rule_init()/match() to reflect the change. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>