aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-23[SCSI] refactor sdev/starget/shost busy checkingKiyoshi Ueda
This patch refactors the busy checking codes of scsi_device, Scsi_Host and scsi_target. There should be no functional change. This is a preparation for another patch which exports scsi's busy state to the block layer for request stacking drivers. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver.Bernd Schubert
Make SPI timeout 10s the same as SAS Signed-off-by: Bernd Schubert <bs@q-leap.de> Acked-by: "Prakash, Sathya" <Sathya.Prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resumethomas schorpp
Take the Diag/Activity-LED of the HBA out of diagnostic mode on PM resume after successful PM resume from standby and HBA restart, it remained always on before. If something fails before complete recovery, it should remain on, since it is a diagnostics LED, reason for the used higher layer for the clear. Signed-off-by: thomas.schorpp@gmail.com Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic79xx: user visible misuse wrong SI units (not disk size!)Alan Cox
MHZ not Mhz for SI unit pedants Closes bug #6422 Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] ipr: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic79xx: fix shadowed variablesHarvey Harrison
OK to just reuse the outer declaration as it is never used again. drivers/scsi/aic7xxx/aic79xx_pci.c:340:12: warning: symbol 'devconfig' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_pci.c:299:12: originally declared here targpcistat is always assigned just before use, remove the inner declaration. drivers/scsi/aic7xxx/aic79xx_pci.c:486:9: warning: symbol 'targpcistat' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_pci.c:429:9: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic79xx: fix shadowed variables, add staticsHarvey Harrison
Redeclared within different if/else blocks, safe to reuse the original from beginning of function. drivers/scsi/aic7xxx/aic79xx_core.c:2475:10: warning: symbol 'scbid' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here drivers/scsi/aic7xxx/aic79xx_core.c:2586:10: warning: symbol 'scbid' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here drivers/scsi/aic7xxx/aic79xx_core.c:2587:15: warning: symbol 'scb' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2393:13: originally declared here Use caminfo for the outer declaration, the redeclared version is iterating over all initiator/target pairs (devices) which. drivers/scsi/aic7xxx/aic79xx_core.c:8857:23: warning: symbol 'devinfo' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:8711:21: originally declared here Forward declaration was already marked static, make the definition match. drivers/scsi/aic7xxx/aic79xx_core.c:3693:1: warning: symbol 'ahd_devlimited_syncrate' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: update *_shipped filesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: update .reg filesDenys Vlasenko
Update .reg files, marking unused registers with dont_generate_debug_code. Comment explains how to use it. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parserDenys Vlasenko
aic7xxx still contains ~30kb of dead code if pretty printing of registers is requested. These patches deal with it. Size differences: text data bss dec hex filename DEBUG_ENABLE+PRETTY_PRINT: 234697 2362 1188 238247 3a2a7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 205092 2362 1188 208642 32f02 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o NO_DEBUG_ENABLE+PRETTY_PRINT: 227272 2362 1172 230806 38596 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 197671 2362 1172 201205 311f5 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o DEBUG_ENABLE+NO_PRETTY_PRINT: 192457 2362 1188 196007 2fda7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 192457 2362 1188 196007 2fda7 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o NO_DEBUG_ENABLE+NO_PRETTY_PRINT: 185040 2362 1172 188574 2e09e linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 185040 2362 1172 188574 2e09e linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o This patch: Introduce "dont_generate_debug_code" keyword in aicasm parser. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] scsi_dh: Initialize path state to be passive when path is not ownedChandra Seetharaman
Set the path state to be passive when we learn that the controller does not own the path to the LUN. This will avoid sending even a single i/o thru the passive path at the probe time. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] fix removable device inability to detect disk changesJames Bottomley
On Tue, 12 Aug 2008 15:08:14 +0200 Giuliano Pochini <pochini@shiny.it> wrote: > Fujitsu magneto-optical drive, Adaptec 29160 and > Linux Jay 2.6.26 #7 SMP Sun Aug 10 18:34:22 CEST 2008 ppc 7455, altivec supported PowerMac3,6 GNU/Linux > > When I insert a disk and I mount it, scsi_test_unit_ready() is called and > the do-while loop gets sshdr->sense_key == UNIT_ATTENTION in the first > cycle and 0 in the second one. So the if below misses the UNIT_ATTENTION > and sdev->changed = 1 is not executed. At this point bad things can > happen... I'm not sure how to fix this. Any clue ? The problem is essentially caused by us eating UNIT_ATTENTION conditions in scsi_test_unit_ready(). Fix by updating the ->changed flag when this happens if the media is removable. [pochini@shiny.it: updates to tidy up patch] Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
2008-10-17Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits) hwmon: (adm1026) Prevent log spamming hwmon: (adm1026) Fix debug messages hwmon: (adm1029) Use mask for fan_div value hwmon: (adt7470) Add documentation hwmon: (ibmaem) Automatically load on IBM systems via DMI hwmon: (ibmpex) Automatically load on IBM systems via DMI hwmon: (w83781d) Use new style driver binding hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA hwmon: (w83781d) Additional information about AS99127F PWM hwmon: (w83781d) Detect alias chips hwmon: (w83781d) Refactor beep enable handling hwmon: Drop dead links to old National Semiconductor chip datasheets hwmon: (w83791d) add support for thermal cruise mode hwmon: (w83791d) add pwm_enable support hwmon: (w83791d) add manual PWM support hwmon: (w83791d) fan 4/5 pins can also be used for gpio hwmon: (max1619) Use inline functions instead of macros hwmon: (it87) Fix thermal sensor type values hwmon: (lm78) Convert to a new-style i2c driver ...
2008-10-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix debugfs_create_dir's error checking method for sound/soc/ ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API ALSA: kernel docs: fix sound/core/ kernel-doc ALSA: Handle NULL jacks in snd_jack_report() ALSA: hda - Fix PCM type of Nvidia HDMI devices
2008-10-17Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs.
2008-10-17Merge branch 'for-linus' of git://www.jni.nu/crisLinus Torvalds
* 'for-linus' of git://www.jni.nu/cris: CRIS: proper defconfig setup [CRIS] Rename boot-linkscripts and fix the path to them.
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-17hwmon: (adm1026) Prevent log spammingJean Delvare
When debugging is enabled, the adm1026 driver currently logs the message "Setting VID from GPIO11-15" 108 times each time you run "sensors". Once should be enough. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com>
2008-10-17hwmon: (adm1026) Fix debug messagesJean Delvare
* Add missing new-line to one debug message. * Remove leading colon from 3 debug messages. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com>
2008-10-17hwmon: (adm1029) Use mask for fan_div valueCorentin Labbe
This is my patch for testing correct values of fan div in adm1029 and prevent a division by 0 for some (unlikely) register values. Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (adt7470) Add documentationDarrick J. Wong
Add at least the bare minimum of documentation for this chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (ibmaem) Automatically load on IBM systems via DMIDarrick J. Wong
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (ibmpex) Automatically load on IBM systems via DMIDarrick J. Wong
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83781d) Use new style driver bindingWolfgang Grandegger
This patch modifies the w83781d driver to use new style driver binding. Substantial code modifications are required to deal with the new interface, especially legacy device detection. [JD: largely edited to make the patch smaller and to get the driver to work again on ISA devices.] Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83781d) Stop abusing struct i2c_client for ISA devicesJean Delvare
Upcoming changes to the I2C part of the w83781d driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
2008-10-17hwmon: (w83781d) Make ISA interface depend on CONFIG_ISAWolfgang Grandegger
Probing the ISA bus on systems without ISA bus may hang the system. This patch makes the ISA bus related code depend on the kernel configuration parameter CONFIG_ISA. It moves ISA bus related code into one #ifdef CONFIG_ISA ... #endif block and adds some helper function. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83781d) Additional information about AS99127F PWMJean Delvare
This information was provided in lm-sensors ticket #2350: http://www.lm-sensors.org/ticket/2350 This is IMHO still not enough to be able to safely implement fan control support for the AS99127F, but this is valuable information so I am adding it to the documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83781d) Detect alias chipsJean Delvare
The W83781D and W83782D can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the w83781d driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
2008-10-17hwmon: (w83781d) Refactor beep enable handlingJean Delvare
We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
2008-10-17hwmon: Drop dead links to old National Semiconductor chip datasheetsJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83791d) add support for thermal cruise modeMarc Hulsman
Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83791d) add pwm_enable supportMarc Hulsman
Add support for pwm_enable. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83791d) add manual PWM supportMarc Hulsman
Add PWM manual control. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (w83791d) fan 4/5 pins can also be used for gpioMarc Hulsman
Pins fan/pwm 4-5 can be in use as GPIO. If that is the case, do not create their sysfs-interface. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (max1619) Use inline functions instead of macrosAndrew Morton
Macros evaluating their arguments more than once are evil. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (it87) Fix thermal sensor type valuesJean Delvare
The it87 driver doesn't follow the standard sensor type values as documented in Documentation/hwmon/sysfs-interface. It uses value 2 for thermistors instead of value 4. This causes "sensors" to tell the user that the chip is setup for a transistor while it is actually setup for a thermistor. Using value 4 for thermistors solves the problem. For compatibility reasons, we still accept value 2 but emit a warning message so that users update their configuration files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
2008-10-17hwmon: (lm78) Convert to a new-style i2c driverJean Delvare
The new-style lm78 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm78) Stop abusing struct i2c_client for ISA devicesJean Delvare
Upcoming changes to the I2C part of the lm78 driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm78) Prevent misdetection of Winbond chipsJean Delvare
The LM78 detection is relatively weak, and sometimes recent Winbond chips can be misdetected as an LM78. We have had repeated reports of this happening. We have an explicit check against this for the ISA access, do the same for I2C access now. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm78) Detect alias chipsJean Delvare
The LM78 and LM79 can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the lm78 driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm78) Fix I/O resource conflict with PNPJean Delvare
Only request I/O ports 0x295-0x296 instead of the full I/O address range. This solves a conflict with PNP resources on a few motherboards. Also request the I/O ports in two parts (4 low ports, 4 high ports) during device detection, otherwise the PNP resource make the request (and thus the detection) fail. This is the exact same fix that was applied to driver w83781d in March 2008 to address the same problem: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2961cb22ef02850d90e7a12c28a14d74e327df8d Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm85) Better label namesJean Delvare
Label names ERROR1 and ERROR3 aren't exactly explicit. Change them for better names that indicate what we are up to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17hwmon: (lm85) Simplify RANGE_TO_REGJean Delvare
Function RANGE_TO_REG can easily be simplified. Credits go to Herbert Poetzl for indirectly suggesting this to me. I tested that the new implementation returns the same result as the original implementation for all input values. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17hwmon: (lm85) Convert to a new-style i2c driverJean Delvare
The new-style lm85 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17hwmon: (lm85) Support different PWM frequency tablesJean Delvare
The Analog Devices and SMSC devices supported by the lm85 driver do not have the same PWM frequency table as the National Semiconductor devices. Add support for per-device frequency tables. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17hwmon: (lm85) Select the closest PWM frequencyJean Delvare
The LM85 and compatible chips only support 8 arbitrary PWM frequencies. The algorithm to pick one of them based on the user input is not optimum. Improve it to always pick the closest supported frequency. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17hwmon: (lm85) Implement the standard PWM frequency interfaceJean Delvare
Implement the standard PWM frequency interface: pwm[1-*]_freq in units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq in units of 0.1 Hz. The old naming was not only non-standard, it was also confusing, because it suggested that the frequency value only applied in automatic fan speed mode, which isn't true. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17hwmon: (lm85) Rework the device detectionJean Delvare
Rework the device detection to make it clearer and faster in the general case (when a known device is found.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 07:09:13 +0000