aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-06-22[PATCH] NFSv4: ACL support for the NFSv4 client: readJ. Bruce Fields
Client-side support for NFSv4 ACLs. Exports the raw xdr code via the system.nfs4_acl extended attribute. It is up to userspace to decode the acl (and to provide correctly xdr'd acls on setxattr), and to convert to/from POSIX ACLs if desired. This patch provides only the read support. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFSv4: Client-side xdr for reading NFSv4 aclsJ. Bruce Fields
Client-side support for NFSv4 acls: xdr encoding and decoding routines for reading acls Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFSv4: fix fattr size calculationsJ. Bruce Fields
Make nfs4 fattr size calculations more explicit, revising them downward a bit in the process. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFSv4: Add {get,set,list}xattr methods for nfs4J. Bruce Fields
Add {get,set,list}xattr methods for nfs4. The new methods are no-ops, to be used by subsequent ACL patch. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Add hooks to allow common NFS attribute code to clear cached aclsTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Allow NFS versions to support different sets of inode operations.J. Bruce Fields
ACL support will require supporting additional inode operations in v4 (getxattr, setxattr, listxattr). This patch allows different protocol versions to support different inode operations by adding a file_inode_ops to the nfs_rpc_ops (to match the existing dir_inode_ops). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: cleanup: shrink struct nfs_open_contextTrond Myklebust
Remove the wait queue, and replace the functions that depended on it with wait_on_bit(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Shrink struct rpc_task by switching to wait_on_bit()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Remove unused NFS inode field readdir_timestamp.Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Header file cleanup...Trond Myklebust
- Move NFSv4 state definitions into a private header file. - Clean up gunk in nfs_fs.h Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Kill annoying mount version mismatch printksTrond Myklebust
Ensure that we fix up the missing fields in the nfs_mount_data with sane defaults for older versions of mount, and return errors in the cases where we cannot. Convert a bunch of annoying warnings into dprintks() Return -EPROTONOSUPPORT rather than EIO if mount() tries to set NFSv3 without it actually being compiled in. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Make rpc_create_client() probe server for RPC program+version ↵Trond Myklebust
support Ensure that we don't create an RPC client without checking that the server does indeed support the RPC program + version that we are trying to set up. This enables us to immediately return an error to "mount" if it turns out that the server is only supporting NFSv2, when we requested NFSv3 or NFSv4. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Make rpc_create_client() destroy the transport on failure.Trond Myklebust
This saves us a couple of lines of cleanup code for each call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Ensure XDR iovec length is initialized correctly in call_headerTrond Myklebust
Fix up call_header() so that it calls xdr_adjust_iovec(). Fix calculation of the scratch buffer length in xdr_init_encode(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Fix a race with rpc_restart_call()Trond Myklebust
If the task->tk_exit() wants to restart the RPC call after delaying then the current RPC code will clobber the timer by calling rpc_delete_timer() immediately after re-entering the loop in __rpc_execute(). Problem noticed by Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds
2005-06-22Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/w1-2.6Linus Torvalds
2005-06-22[PATCH] Update my credits entryJames Morris
2005-06-22[PATCH] Fix extra double quote in IPV4 KconfigKumar Gala
Kconfig option had an extra double quote at the end of the line which was causing in warning when building. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[ALSA] emu10k1: Add more card identification entries.James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-06-22[ALSA] Add dxs_support for Soltek SL-K8Tpro-939Takashi Iwai
VIA82xx driver Added dxs_support entry for Soltek SL-K8Tpro-939. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] SigmaTel HDA SPDIF and input mux updatesMatt
HDA Codec driver Adds SPDIF in/out support to the SigmaTel HDA codecs. Now builds the input mux control element names from the defcfg regs. Signed-off-by: Matt <matt@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] via82xx - Fix info text about dxs_support optionTakashi Iwai
VIA82xx driver Fixed the info text about dxs_support option (suggest dxs_support=5). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - More fix of ALC880 codec supportTakashi Iwai
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Add const prefixTakashi Iwai
Control Midlevel Add const prefix to snd_kcontrol_new_t pointer for better protection. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - Add support of more models with ALC codecsTakashi Iwai
HDA Codec driver,HDA Intel driver Merged the work of pshou <pshou@realtek.com.tw> for the support of more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack, and ALC260 HP. Tests with the real hardwares are appreciated. The codec patch is cleaned up: The preset configuration of codecs are stored in the table and copied to the spec instance. Added/fixed comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - Allow sub_device=0 in board config checkTakashi Iwai
HDA Codec driver Allow sub_device=0 in board config check. This means that every device with the given sub vendor ID will match. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - Clean up and fix ALC-codec support codeTakashi Iwai
HDA Codec driver Clean up and fix ALC-codec support code. The last addition of bound volume is fixed now to handle correctly the bound 'mute switches'. The analog loopback should work better. The init verbs are fixed together with this change. The numbers are replaced with macros for better readability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - Feed front signals to all surroundsTakashi Iwai
HDA Codec driver Feed front signals to all surround channels if no data is given for surround channels. It seems that CLFE works as expected (only center outputs) even if connected from the front line - at least on my test system. If this change causes problems on other system (e.g. only the left channel is transferred to the center channel), please let me know... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - Print all AMP IN valuesTakashi Iwai
HDA generic driver Print all AMP IN values when multiple nodes are connected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Disable MPU401 on SIS7018Takashi Iwai
Trident driver Disable MPU401 support on SIS7018 since it results in kernel freeze. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Fix the analog loopback volumes of ALC codecsTakashi Iwai
HDA Codec driver Fix the analog loopback volumes of ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Fix the PCM mixer switch for AD1986ATakashi Iwai
HDA Codec driver Fix the PCM mixer switch for AD1986a (it was a typo). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Fix the handling of amp cache in hda-codecTakashi Iwai
HDA Codec driver Fixed the handling of amp cache in hda-codec driver. The confliction of cache values with different indices should be fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] via82xx - fixed entry for Umax AB 595T (VIA K8N800A - VT8237)Jaroslav Kysela
VIA82xx driver As the original reporter noted, the NO_VRA must be used for loud volumes. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-06-22[ALSA] ca0106: Fix 96000 Hz audio playback.James Courtier-Dutton
CA0106 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-06-22[ALSA] Add documentation for HDSP MADITakashi Iwai
Documentation Added documentation for HDSP MADI driver by Winfried Ritsch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Add HDSP MADI driverTakashi Iwai
HDSPM driver,PCI drivers,RME9652 driver Added RME Hammerfall DSP MADI driver by Winfried Ritsch. (Moved from alsa-driver tree to mainline.) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] cs4236-irq-handling-fix.patchChristoph Schulz
CS4236+ driver Background: The card/chipset supports an external MIDI interrupt. By default, this interrupt isn't used (because the isapnp mechanism chooses a configuration without an assigned interrupt). If the user wishes to explicitly select an interrupt via the mpu_irq parameter for such a configured device, it doesn't work: The driver always shows: isapnp MPU: port=0x330, irq=-1 (note the 'irq=-1') Problem: The driver only allows to set the irq if pnp_irq_valid returns true for this particular pnp device. This, however, is only true if an interrupt has already been assigned (pnp_valid_irq returns true if the flag IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set). If no interrupt has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns false, thereby inhibiting the selection of a valid irq. Solution: Don't check for a valid (= already assigned) irq at the point of calling pnp_resource_change. Tested successfully on Linux 2.6.11. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-06-22[ALSA] OSS PCM emulation - The 2nd final fix for SNDCTL_DSP_GETOPTR problemJaroslav Kysela
ALSA<-OSS emulation The problem was negative/wrong result (info.bytes) in a specific condition at playback startup. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-06-22[ALSA] Add FSC T3010 quirkTakashi Iwai
Intel8x0 driver Added ac97_quirk for FSC T3010. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] OSS PCM emulation - The final fix for SNDCTL_DSP_GETOPTR problemJaroslav Kysela
ALSA<-OSS emulation The problem was negative result (info.bytes) in a specific condition at playback startup. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-06-22[ALSA] Fix races between PCM drain and other opsTakashi Iwai
PCM Midlevel Fix semaphore races between PCM drain and other ops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-intel - Fix Oops in the error pathTakashi Iwai
HDA Intel driver Fixed Oops in the error path from probe function of snd-hda-intel driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Add write support to snd-page-alloc proc fileTakashi Iwai
Documentation,Memalloc module,RME HDSP driver,RME9652 driver Add the write support to snd-page-alloc proc file for buffer pre-allocation. Removed the pre-allocation codes via module options. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] Remove redundant NULL checks before kfreeJesper Juhl
Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y Checking a pointer for NULL before calling kfree() on it is redundant, kfree() deals with NULL pointers just fine. This patch removes such checks from sound/ This patch also makes another, but closely related, change. It avoids casting pointers about to be kfree()'ed. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] AC97 - renamed vendor/device to subvendor/subdevice where appropriateJames Courtier-Dutton
Intel8x0 driver To avoid confusion, the structure members vendor/device were renamed to subvendor/subdevice, because we compare them with PCI subsystem vendor and subsystem device. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-06-22[ALSA] AC97 - renamed vendor/device to subvendor/subdevice where appropriateJaroslav Kysela
AC97 Codec,ATIIXP driver,VIA82xx driver To avoid confusion, the structure members vendor/device were renamed to subvendor/subdevice, because we compare them with PCI subsystem vendor and subsystem device. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-06-22[ALSA] via82xx - added 0x1071/0x8399 to while listJaroslav Kysela
VIA82xx driver - 0x1071, 0x8399 == VIA_DXS_ENABLE - Umax AB 595T (VIA K8N800A - VT8237) - reporter: Honza Machacek <Hloupy.Honza@centrum.cz> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-06-22[ALSA] Modem support for ALI5451Sasha Khapyorsky
ALI5451 driver This patch adds modem support for ali5451. Since it is same pci device all is done in ali5451.c. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 06:13:31 +0000