aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-27KVM: Increase vcpu count to 16Avi Kivity
With NPT support, scalability is much improved. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Add API to retrieve the number of supported vcpus per vmAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: make register_address_increment and JMP_REL static inlinesHarvey Harrison
Change jmp_rel() to a function as well. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: make register_address, address_mask static inlinesHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: add ad_mask static inlineHarvey Harrison
Replaces open-coded mask calculation in macros. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27x86: KVM guest: paravirtualized clocksourceGlauber de Oliveira Costa
This is the guest part of kvm clock implementation It does not do tsc-only timing, as tsc can have deltas between cpus, and it did not seem worthy to me to keep adjusting them. We do use it, however, for fine-grained adjustment. Other than that, time comes from the host. [randy dunlap: add missing include] [randy dunlap: disallow on Voyager or Visual WS] Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: paravirtualized clocksource: host partGlauber de Oliveira Costa
This is the host part of kvm clocksource implementation. As it does not include clockevents, it is a fairly simple implementation. We only have to register a per-vcpu area, and start writing to it periodically. The area is binary compatible with xen, as we use the same shadow_info structure. [marcelo: fix bad_page on MSR_KVM_SYSTEM_TIME] [avi: save full value of the msr, even if enable bit is clear] [avi: clear previous value of time_page] Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: enable LBR virtualizationJoerg Roedel
This patch implements the Last Branch Record Virtualization (LBRV) feature of the AMD Barcelona and Phenom processors into the kvm-amd module. It will only be enabled if the guest enables last branch recording in the DEBUG_CTL MSR. So there is no increased world switch overhead when the guest doesn't use these MSRs. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: allocate the MSR permission map per VCPUJoerg Roedel
This patch changes the kvm-amd module to allocate the SVM MSR permission map per VCPU instead of a global map for all VCPUs. With this we have more flexibility allowing specific guests to access virtualized MSRs. This is required for LBR virtualization. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: let init_vmcb() take struct vcpu_svm as parameterJoerg Roedel
Change the parameter of the init_vmcb() function in the kvm-amd module from struct vmcb to struct vcpu_svm. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: fix typo in VMX header defineRyan Harper
Looking at Intel Volume 3b, page 148, table 20-11 and noticed that the field name is 'Deliver' not 'Deliever'. Attached patch changes the define name and its user in vmx.c Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: add support for Nested PagingJoerg Roedel
This patch contains the SVM architecture dependent changes for KVM to enable support for the Nested Paging feature of AMD Barcelona and Phenom processors. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: add TDP support to the KVM MMUJoerg Roedel
This patch contains the changes to the KVM MMU necessary for support of the Nested Paging feature in AMD Barcelona and Phenom Processors. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: export the load_pdptrs() function to modulesJoerg Roedel
The load_pdptrs() function is required in the SVM module for NPT support. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: make the __nonpaging_map function genericJoerg Roedel
The mapping function for the nonpaging case in the softmmu does basically the same as required for Nested Paging. Make this function generic so it can be used for both. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: export information about NPT to generic x86 codeJoerg Roedel
The generic x86 code has to know if the specific implementation uses Nested Paging. In the generic code Nested Paging is called Two Dimensional Paging (TDP) to avoid confusion with (future) TDP implementations of other vendors. This patch exports the availability of TDP to the generic x86 code. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: add module parameter to disable Nested PagingJoerg Roedel
To disable the use of the Nested Paging feature even if it is available in hardware this patch adds a module parameter. Nested Paging can be disabled by passing npt=0 to the kvm_amd module. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: add detection of Nested Paging featureJoerg Roedel
Let SVM detect if the Nested Paging feature is available on the hardware. Disable it to keep this patch series bisectable. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: SVM: move feature detection to hardware setup codeJoerg Roedel
By moving the SVM feature detection from the each_cpu code to the hardware setup code it runs only once. As an additional advance the feature check is now available earlier in the module setup process. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: allow access to EFER in 32bit KVMJoerg Roedel
This patch makes the EFER register accessible on a 32bit KVM host. This is necessary to boot 32 bit PAE guests under SVM. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: unifdef the EFER specific codeJoerg Roedel
To allow access to the EFER register in 32bit KVM the EFER specific code has to be exported to the x86 generic code. This patch does this in a backwards compatible manner. [avi: add check for EFER-less hosts] Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: align valid EFER bits with the features of the host systemJoerg Roedel
This patch aligns the bits the guest can set in the EFER register with the features in the host processor. Currently it lets EFER.NX disabled if the processor does not support it and enables EFER.LME and EFER.LMA only for KVM on 64 bit hosts. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: make EFER_RESERVED_BITS configurable for architecture codeJoerg Roedel
This patch give the SVM and VMX implementations the ability to add some bits the guest can set in its EFER register. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Disable pagefaults during copy_from_user_inatomic()Andrea Arcangeli
With CONFIG_PREEMPT=n, this is needed in order to disable the fault-in code from sleeping. Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Use CONFIG_PREEMPT_NOTIFIERS around struct preempt_notifierHollis Blanchard
This allows kvm_host.h to be #included even when struct preempt_notifier is undefined. This is needed to build ppc asm-offsets.h. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Enable Virtual Processor Identification (VPID)Sheng Yang
To allow TLB entries to be retained across VM entry and VM exit, the VMM can now identify distinct address spaces through a new virtual-processor ID (VPID) field of the VMCS. [avi: drop vpid_sync_all()] [avi: add "cc" to asm constraints] Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Limit vcpu mmap size to one page on non-x86Avi Kivity
The second page is only needed on archs that support pio. Noted by Carsten Otte. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Decouple mmio from shadow page tablesAvi Kivity
Currently an mmio guest pte is encoded in the shadow pagetable as a not-present trapping pte, with the SHADOW_IO_MARK bit set. However nothing is ever done with this information, so maintaining it is a useless complication. This patch moves the check for mmio to before shadow ptes are instantiated, so the shadow code is never invoked for ptes that reference mmio. The code is simpler, and with future work, can be made to handle mmio concurrently. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: group decoding for group 1 instructionsAvi Kivity
Opcodes 0x80-0x83 Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Only x86 has pioAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: constify function pointer tablesJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: add group 7 decodingAvi Kivity
This adds group decoding for opcode 0x0f 0x01 (group 7). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: Group decoding for groups 4 and 5Avi Kivity
Add group decoding support for opcode 0xfe (group 4) and 0xff (group 5). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: Group decoding for group 3Avi Kivity
This adds group decoding support for opcodes 0xf6, 0xf7 (group 3). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: group decoding for group 1AAvi Kivity
This adds group decode support for opcode 0x8f. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: add support for group decodingAvi Kivity
Certain x86 instructions use bits 3:5 of the byte following the opcode as an opcode extension, with the decode sometimes depending on bits 6:7 as well. Add support for this in the main decoding table rather than an ad-hock adaptation per opcode. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Simplify hash table indexingDong, Eddie
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Update shadow ptes on partial guest pte writesDong, Eddie
A guest partial guest pte write will leave shadow_trap_nonpresent_pte in spte, which generates a vmexit at the next guest access through that pte. This patch improves this by reading the full guest pte in advance and thus being able to update the spte and eliminate the vmexit. This helps pae guests which use two 32-bit writes to set a single 64-bit pte. [truncation fix by Eric] Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Feng (Eric) Liu <eric.e.liu@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3: x86_64/mm: check and print vmemmap allocation continuous x86_64: fix setup_node_bootmem to support big mem excluding with memmap x86_64: make reserve_bootmem_generic() use new reserve_bootmem() mm: allow reserve_bootmem() cross nodes mm: offset align in alloc_bootmem() mm: fix alloc_bootmem_core to use fast searching for all nodes mm: make mem_map allocation continuous
2008-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: scripts/Makefile.modpost typo fix kbuild: soften MODULE_LICENSE check
2008-04-26x86_64/mm: check and print vmemmap allocation continuousYinghai Lu
On big systems with lots of memory, don't print out too much during bootup, and make it easy to find if it is continuous. on 256G 8 sockets system will get [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0 [ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0 [ffffe20038700000-ffffe200387fffff] potential offnode page_structs [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1 [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2 [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2 [ffffe20054700000-ffffe200547fffff] potential offnode page_structs [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2 [ffffe20070700000-ffffe200707fffff] potential offnode page_structs [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3 [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4 [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4 [ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4 [ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5 [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6 [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6 [ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6 [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7 instead of a very long print out... Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26x86_64: fix setup_node_bootmem to support big mem excluding with memmapYinghai Lu
typical case: four sockets system, every node has 4g ram, and we are using: memmap=10g$4g to mask out memory on node1 and node2 when numa is enabled, early_node_mem is used to get node_data and node_bootmap. if it can not get memory from the same node with find_e820_area(), it will use alloc_bootmem to get buff from previous nodes. so check it and print out some info about it. need to move early_res_to_bootmem into every setup_node_bootmem. and it takes range that node has. otherwise alloc_bootmem could return addr that reserved early. depends on "mm: make reserve_bootmem can crossed the nodes". Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86_64: make reserve_bootmem_generic() use new reserve_bootmem()Yinghai Lu
"mm: make reserve_bootmem can crossed the nodes" provides new reserve_bootmem(), let reserve_bootmem_generic() use that. reserve_bootmem_generic() is used to reserve initramdisk, so this way we can make sure even when bootloader or kexec load ranges cross the node memory boundaries, reserve_bootmem still works. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26mm: allow reserve_bootmem() cross nodesYinghai Lu
split reserve_bootmem_core() into two functions, one which checks conflicts, and one which sets the bits. and make reserve_bootmem to loop bdata_list to cross the nodes. user could be crashkernel and ramdisk..., in case the range provided by those externalities crosses the nodes. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26mm: offset align in alloc_bootmem()Yinghai Lu
need offset alignment when node_boot_start's alignment is less than the alignment required. use local node_boot_start to match alignment - so don't add extra operation in search loop. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26mm: fix alloc_bootmem_core to use fast searching for all nodesYinghai Lu
Make the nodes other than node 0 use bdata->last_success for fast search too. We need to use __alloc_bootmem_core() for vmemmap allocation for other nodes when numa and sparsemem/vmemmap are enabled. Also, make fail_block path increase i with incr only after ALIGN to avoid extra increase when size is larger than align. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26mm: make mem_map allocation continuousYinghai Lu
vmemmap allocation currently has this layout: [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001800000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001c00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810002000000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002400000 on node 0 ... note that there is a 2M hole between them - not optimal. the root cause is that usemap (24 bytes) will be allocated after every 2M mem_map, and it will push next vmemmap (2M) to the next (2M) alignment. solution: try to allocate the mem_map continously. after the patch, we get: [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0 ... which is the ideal layout. and usemap will share a page because of they are allocated continuously too: sparse_early_usemap_alloc: usemap = ffff810024e00000 size = 24 sparse_early_usemap_alloc: usemap = ffff810024e00080 size = 24 sparse_early_usemap_alloc: usemap = ffff810024e00100 size = 24 sparse_early_usemap_alloc: usemap = ffff810024e00180 size = 24 ... so we make the bootmem allocation more compact and use less memory for usemap => mission accomplished ;-) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3: x86, bitops: select the generic bitmap search functions x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting only x86: finalize bitops unification x86, UML: remove x86-specific implementations of find_first_bit x86: optimize find_first_bit for small bitmaps x86: switch 64-bit to generic find_first_bit x86: generic versions of find_first_(zero_)bit, convert i386 bitops: use __fls for fls64 on 64-bit archs generic: implement __fls on all 64-bit archs generic: introduce a generic __fls implementation x86: merge the simple bitops and move them to bitops.h x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps x86, uml: fix uml with generic find_next_bit for x86 x86: change x86 to use generic find_next_bit uml: Kconfig cleanup uml: fix build error
2008-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits) ide: constify struct ide_dma_ops ide: add struct ide_dma_ops (take 3) ide: add IDE_HFLAG_SERIALIZE_DMA host flag sl82c105: check bridge revision in sl82c105_init_one() au1xxx-ide: use ->init_dma method palm_bk3710: use ->init_dma method sgiioc4: use ->init_dma method icside: use ->init_dma method ide-pmac: use ->init_dma method ide: do complete DMA setup in ->init_dma method (take 2) au1xxx-ide: fix MWDMA support ide: cleanup ide_setup_dma() ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma() ide: export ide_allocate_dma_engine() ide: move ide_setup_dma() call out from ->init_dma method alim15x3: skip DMA initialization completely on revs < 0x20 pdc202xx_old: remove init_dma_pdc202xx() ide: don't display "BIOS" settings in ide_setup_dma() ide: remove ->cds field from ide_hwif_t (take 2) ide: remove ide_dma_iobase() ...
2008-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam: x86, boot: Document for linked list of struct setup_data x86, boot: export linked list of struct setup_data via debugfs x86, boot: add linked list of struct setup_data x86, boot: add free_early to early reservation machanism