aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-11-06intel_menlow: MAINTAINERSThomas, Sujith
Signed-off-by: Sujith Thomas <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06intel_menlow: Add comment documenting legal GTHS valuesThomas, Sujith
Signed-off-by: Sujith Thomas <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_ECBjorn Helgaas
Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_POWERBjorn Helgaas
Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(), acpi_power_transition(), etc) are called unconditionally from the ACPI core, so we already depend on it always being present. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: SBS: remove useless acpi_cm_sbs_init() initcallBjorn Helgaas
acpi_cm_sbs_init() doesn't do anything, so we can just remove it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove comments about debug layer/level to useBjorn Helgaas
I don't think there's any point in cluttering the code with these. Better to improve the documentation so *anybody* can figure out what layer & level to use. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-03intel_menlow: don't set max_state a negative valueZhang Rui
max_state is unsigned long. don't set max_state a negative value Cc : Thomas Sujith <sujith.thomas@intel.com> Cc : Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-28i7300_idle: Kconfig, show menu only on x86_64Venki Pallipadi
...since today it contains only a single driver which is visible to just x86_64 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-27Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: libata: fix NCQ devices behind port multipliers scsi: make sure that scsi_init_shared_tag_map() doesn't overwrite existing map
2008-10-27libata: fix NCQ devices behind port multipliersJens Axboe
For devices behind sata port multipliers, we have to make sure that they share a tag map since all tags for that PMP must be unique. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-27scsi: make sure that scsi_init_shared_tag_map() doesn't overwrite existing mapJens Axboe
Right now callers have to check whether scsi_host->bqt is already set up, it's much cleaner to just have scsi_init_shared_tag_map() does this check on its own. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (33 commits) MIPS: lemote/lm2e: Added io_map_base to pci controller MIPS: TXx9: Make firmware parameter passing more robust MIPS: Markeins: Remove unnecessary define and cleanup comments, etc. MIPS: Markeins: Extract ll_emma2rh_* functions MIPS: Markeins: Remove runtime debug prints MIPS: EMMA: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.c MIPS: EMMA2RH: Remove emma2rh_gpio_irq_base MIPS: EMMA2RH: Remove emma2rh_sw_irq_base MIPS: EMMA2RH: Remove emma2rh_irq_base global variable MIPS: EMMA2RH: Remove emma2rh_sync on read operation MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dir MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/ MIPS: EMMA: Kconfig reorganization MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors MIPS: RB532: Disable the right device MIPS: Add support for NXP PNX833x (STB222/5) into linux kernel MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spelling MIPS: Fix KGDB build error INPUT: sgi_btns: Add license specification MIPS: IP22: ip22-int.c header file weeding. ...
2008-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-sbp2: fix races firewire: fw-sbp2: delay first login to avoid retries firewire: fw-ohci: initialization failure path fixes firewire: fw-ohci: don't leak dma memory on module removal firewire: fix struct fw_node memory leak firewire: Survive more than 256 bus resets
2008-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ASoC: Blackfin: update SPORT0 port selector (v2) ALSA: hda - Restore default pin configs for realtek codecs sound: use a common working email address pci: use pci_ioremap_bar() in sound/
2008-10-27MIPS: lemote/lm2e: Added io_map_base to pci controllerZhang Le
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: Make firmware parameter passing more robustGeert Uytterhoeven
When booting Linux on a txx9 board with VxWorks boot loader, it crashes in prom_getenv(), as VxWorks doesn't pass firmware parameters in a0-a3 (in my case, the actual leftover values in these registers were 0x80002000, 0x80001fe0, 0x2000, and 0x20). Make the parsing of argc, argv, and envp a bit more robust by checking if argc is a number below CKSEG0, and argv/envp point to CKSEG0. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Remove unnecessary define and cleanup comments, etc.Shinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Extract ll_emma2rh_* functionsShinya Kuribayashi
These functions are completely ineffective. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Remove runtime debug printsShinya Kuribayashi
Remove runtime db_* macros as we don't need them any more. In general, such helpers are useful for initial porting, but once approved, they are not indispensable. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.cShinya Kuribayashi
Current EMMA2RH irq code is mess. Before cleaning it up, gather them in one place as a first step. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_gpio_irq_baseShinya Kuribayashi
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sw_irq_baseShinya Kuribayashi
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_irq_base global variableShinya Kuribayashi
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sync on read operationShinya Kuribayashi
It's totally a waste of CPU cycles. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dirShinya Kuribayashi
We'll put all EMMA related headers there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/Shinya Kuribayashi
git mv arch/mips/{emma2rh,emma} and fixups Makefiles. We'll put all NEC EMMA series based machines there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Kconfig reorganizationShinya Kuribayashi
- Move EMMA related stuff into arch/mips/emma/Kconfig - Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively - Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processorsShinya Kuribayashi
We already have sufficient infrastructure to support VR5500 and VR5500A series processors. Here's a Makefile support to make it selectable by ports, and enable it for NEC EMMA2RH Markeins board. This patch also fixes a confused target help, and adds 1Gb PageMask bits supported by VR5500 and its variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Disable the right devicePhil Sutter
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add support for NXP PNX833x (STB222/5) into linux kernelDaniel Laird
The following patch add support for the NXP PNX833x SOC. More specifically it adds support for the STB222/5 variant. It fixes the vectored interrupt issue. Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spellingGeert Uytterhoeven
Fix a typo in the comment for the TOSHIBA_RBTX4939 config option Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorYoichi Yuasa
In file included from include/linux/ptrace.h:49, from arch/mips/kernel/kgdb.c:25: /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:123: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:124: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:126: error: expected declaration specifiers or '...' before '__u32' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:127: error: expected declaration specifiers or '...' before '__u32' make[1]: *** [arch/mips/kernel/kgdb.o] Error 1 Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27INPUT: sgi_btns: Add license specificationDmitri Vorobiev
The SGI Volume Button interface driver uses GPL-only symbols platform_driver_unregister and platform_driver_register, but lacks license specification. Thus, when compiled as a module, this driver cannot be installed. This patch fixes this by adding the MODULE_LICENSE() specification. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: IP22: ip22-int.c header file weeding.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: IP22: Small cleanupsDmitri Vorobiev
The following functions disable_local1_irq() disable_local2_irq() disable_local3_irq() are needlessly defined global, so make them static. While at it, fix a whitespace error in the same file. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RBTX4939: Add smc91x supportAtsushi Nemoto
Add smc91x platform device to RBTX4939 board and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: 7 segment LED supportAtsushi Nemoto
Add sysfs interface for 7 segment LED and implement access routine for RBTX4939. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Alchemy: Wire up SD controller on DB/PB1200 boards.Manuel Lauss
Add au1xmmc platform data for PB1200/DB1200 boards and wire up the 2 SD controllers for them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Set gpio interrupt status and level for CompactFlashFlorian Fainelli
This patch sets the correct interrupt status and level in order to get the CompactFlash adapter working. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Fix build errorAdrian Bunk
mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h> This patch fixes the following compile error caused by commit 606a083b1e1a357cb66454e4581b80f1a67d8368 (MIPS: RB532: Cleanup the headers again): <-- snip --> ... CC arch/mips/pci/fixup-rc32434.o arch/mips/pci/fixup-rc32434.c: In function 'pcibios_map_irq': arch/mips/pci/fixup-rc32434.c:46: error: 'GROUP4_IRQ_BASE' undeclared (first use in this function) arch/mips/pci/fixup-rc32434.c:46: error: (Each undeclared identifier is reported only once arch/mips/pci/fixup-rc32434.c:46: error: for each function it appears in.) make[2]: *** [arch/mips/pci/fixup-rc32434.o] Error 1 <-- snip --> A virtually identical patch was also submitted by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorDavid Daney
<asm/ptrace.h> is exported to userland so can't include <linux/ptrace.h>, so replace the C99 types with their basic C type equivalents. Bug originally reported and initial patch by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Set ENOSYS to errno on illegal system call number for syscall(2)Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Set positive error number to errno on illegal_syscallAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: SMP: Don't reenable interrupts in stop_this_cpu; use WAIT instruction.Ralf Baechle
Noticed by Anirban Sinha <ASinha@zeugmasystems.com>; patch by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Don't unmap the memory for dma_sync*.David Daney
We were getting away with this for so long only because the only platform with a non-empty plat_unmap_dma_mem() doesn't call dma_sync_sg_for_cpu() and dma_sync_sg_for_device() from its commonly used drivers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix debugfs_create_*'s error checking method for mips/kernel/Zhaolei
debugfs_create_*() returns NULL on error. Make its callers return -ENODEV on error. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix debugfs_create_*'s error checking method for arch/mips/math-emu/Zhaolei
debugfs_create_*() returns NULL on error. Make its caller debugfs_fpuemu return -ENODEV on error. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27Merge branches 'topic/fix/asoc', 'topic/fix/hda', 'topic/fix/misc' and ↵Takashi Iwai
'topic/pci-ioremap-bar' into for-linus
2008-10-27ALSA: ASoC: Blackfin: update SPORT0 port selector (v2)Cliff Cai
- Setting the TFS pin selector for SPORT 0 based on whether the selected port id F or G. If the port is F then no conflict should exist for the TFS. When Port G is selected and EMAC then there is a conflict between the PHY interrupt line and TFS. Current settings prevent the conflict by ignoring the TFS pin when Port G is selected. This allows both ssm2602 using Port G and EMAC concurrently. - some code cleanup Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27ALSA: hda - Restore default pin configs for realtek codecsTakashi Iwai
Some machines have broken BIOS resume that doesn't restore the default pin configuration properly, which results in a wrong detection of HP pin. This causes a silent speaker output due to missing HP detection. Related bug: Novell bug#406101 https://bugzilla.novell.com/show_bug.cgi?id=406101 This patch fixes the issue by saving/restoring the default pin configs by the driver itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 18:23:21 +0000