aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-10cxgb3 - log adapter serial numberDivy Le Ray
Log HW serial number when cxgb3 module is loaded. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Fatal error updateDivy Le Ray
Stop the MAC when a fatal error is detected. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - tighten checks on TID valuesDivy Le Ray
Enforce validity checks on connection ids Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Expose HW memory page infoDivy Le Ray
A HW issue requires limiting the receive window size to 23 pages of internal memory. These pages can be configured to different sizes, thus the RDMA driver needs to know the page size to enforce the upper limit. Also assign explicit enum values. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - use immediate data for offload TxDivy Le Ray
Send small TX_DATA work requests as immediate data even when there are fragments. this avoids doing multiple DMAs for small fragmented packets. The driver already implements this optimization for small contiguous packets. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - SGE doorbell overflow warningDivy Le Ray
Log doorbell Fifo overflow Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Update rx coalescing lengthDivy Le Ray
Reduce Rx coalescing length to 12288 Large bursts from the adapter to the host create back pressure on the chip. Reducing the burst size avoids the issue. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-103c59x: check return of pci_enable_device()Mark Hindley
Check return of pci_enable_device in vortex_up(). Also modify vortex_up to return error to callers. Handle failure of vortex_up in vortex_open and vortex_resume. Signed-off-by: Mark Hindley <mark@hindley.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ibmveth: Remove use of bitfieldsBrian King
Removes the use of bitfields from the ibmveth driver. This results in slightly smaller object code. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ibmveth: Remove dead frag processing codeBrian King
Removes dead frag processing code from ibmveth. Since NETIF_F_SG was not set, this code was never executed. Also, since the ibmveth interface can only handle 6 fragments, core networking code would need to be modified in order to efficiently enable this support. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ibmveth: Add ethtool driver stats hooksBrian King
Add ethtool hooks to ibmveth to retrieve driver statistics. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ibmveth: Add ethtool TSO handlersBrian King
Add handlers for get_tso and get_ufo to prevent errors being printed by ethtool. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ibmveth: Implement ethtool hooks to enable/disable checksum offloadBrian King
This patch adds the appropriate ethtool hooks to allow for enabling/disabling of hypervisor assisted checksum offload for TCP. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ibmveth: Enable TCP checksum offloadBrian King
This patchset enables TCP checksum offload support for IPV4 on ibmveth. This completely eliminates the generation and checking of the checksum for packets that are completely virtual and never touch a physical network. A simple TCP_STREAM netperf run on a virtual network with maximum mtu set yielded a ~30% increase in throughput. This feature is enabled by default on systems that support it, but can be disabled with a module option. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10dl2k: add Sundance/Tamarack TC902x Gigabit Ethernet Adapter supportKomuro
Actually, D-Link modified the VendorID/ProductID of the TC902x. The TC902x is the original chipset. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10uli526x: Add suspend and resume routines (updated)Rafael J. Wysocki
Add suspend/resume support to the uli526x network driver (tested on x86_64, with 'Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40'). This patch is based on the suspend/resume code in the tg3 driver. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pcnet32: add suspend and resume capabilityDon Fry
Add suspend and resume capability to the driver. Tested both to ram and to disk on x86_64 platform. Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10support for USB autosuspend in the asix driverOliver Neukum
this implements support for USB autosuspend in the asix USB ethernet driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)Auke Kok
This driver implements support for the ICH9 on-board LAN ethernet device. The device is similar to ICH8. The driver encompasses code to support 82571/2/3, es2lan and ICH8 devices as well, but those device IDs are disabled and will be "lifted" from the e1000 driver over one at a time once this driver receives some more live time. Changes to the last snapshot posted are exclusively in the internal hardware API organization. Many thanks to Jeff Garzik for jumping in and getting this organized with a keen eye on the future layout. [ Integrated napi_struct patch from Auke as well... -DaveM ] Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] libertas: remove unused adhoc_rates_b definitionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: printk warning fixesAndrew Morton
drivers/net/wireless/libertas/if_cs.c: In function 'if_cs_prog_helper': drivers/net/wireless/libertas/if_cs.c:462: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/net/wireless/libertas/if_cs.c: In function 'if_cs_prog_real': drivers/net/wireless/libertas/if_cs.c:538: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] net: Kill some unneeded allocation return value casts in libertasJesper Juhl
kmalloc() and friends return void*, no need to cast it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: advertise 11g ad-hoc ratesBrajesh Dave
Advertise support for 802.11g bitrates when starting adhoc networks, not just 802.11b bitrates. Signed-off-by: Brajesh Dave <brajeshd@marvell.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: region code values specified as 8bitMarek Vašut
This patch strips away possible mess in regioncode (eg. on my card - 88W8305 chipset - I get 0x3031 instead of expected 0x0031 and as a result the driver defaults to USA region which is obviously incorrect). Following patch fixes the issue. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: properly end commands on hardware failurePierre Ossman
Make sure that errors reported by the hardware layer is properly handled. Otherwise commands tend to get stuck in limbo. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: send reset command directly instead of calling ↵Dan Williams
libertas_reset_device Ensures that any platform specific code that might live in libertas_reset_device (for example, OLPC tells the EC to do a GPIO-toggled reset of the wireless from libertas_reset_device) isn't called. Could be handled better by interface-specific callbacks and a flag for "other hardware reset". Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: don't stomp on interface-specific private dataDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: reorganize and simplify init sequenceDan Williams
This patch moves all firmware load responsibility into the interface-specific code and gets rid of the firmware pointer in the generic card structure. It also removes 3 fairly unecessary callbacks: hw_register_dev, hw_unregister_dev, and hw_prog_firmware. It also makes the init sequence from interface probe functions more logical, as there are paired add/remove and start/stop calls into generic libertas code. Because the USB driver code uses the same TX URB callback for both firmware upload (where the generic libertas structure isn't initialized yet) and for normal operation (where it is), some bits of USB code have to deal with 'priv' being NULL. All USB firmware upload bits have been changed to not require 'priv' at all, but simply the USB card structure. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix inadvertant removal of bits from commit ↵Dan Williams
831441862956fffa17b9801db37e6ea1650b0f69 Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] drivers/net/wireless/wl3501_cs.c: remove redundant memsetMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: Add ID for ZyXEL M-202 XtremeMIMODaniel Drake
Tested by Nathen Meyers FCC ID: SI5WUB221Z zd1211b chip 0586:340a v4810 high 00-13-49 AL2230_RF pa0 ----S Despite the product name, I'm pretty sure this isn't a MIMO device. It appears just to be a normal ZD1211B and we have never heard of these devices having more than 1 RF. I guess they named this product this way to make it appear that it fits in with the rest of their XtremeMIMO product range. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: consistent handling of ZD1211 specific ratesUlrich Kunitz
As pointed out by Daniel Drake, the zd1211rw driver used several different rate values and names throughout the driver. He has written a patch to change it and tweaked it after some pretty wild ideas from my side. But the discussion helped me to understand the problem better and I think I have nailed it down with this patch. A zd-rate will consist from now on of a four-bit "pure" rate value and a modulation type flag as used in the ZD1211 control set used for packet transmission. This is consistent with the usage in the zd_rates table. If possible these zd-rates should be used in the code. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: Add ID for Sitecom WL-162Daniel Drake
Tested by Giuseppe Lippolis zd1211b chip 0cde:001a v4810 high 00-60-b3 AL2230_RF pa0 g--NS Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: removed noisy debug messagesUlrich Kunitz
While developing the driver we added a lot of debug messages for setting hardware registers. These messages make the reading of the log files difficult and are of no use anymore. This patch removes those messages in zd_chip.c. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10xen-netfront: remove dead codeJeremy Fitzhardinge
This patch removes some residual dead code left over from removing the "flip" receive mode. This patch doesn't change the generated output at all, since gcc already realized it was dead. This resolves the "regression" reported by Adrian. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Adrian Bunk <bunk@stusta.de> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/3c505: Convert to generic booleanRichard Knutsson
Convert to generic boolean Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/tokenring: Convert to generic booleanRichard Knutsson
Convert to generic boolean Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/tokenring/3c359.cSurya Prabhakar N
Hi, Replacing kmalloc with kzalloc and cleaning up memset in drivers/net/tokenring/3c359.c Signed-off-by: Surya Prabhakar <surya.prabhakar@wipro.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - MAC workaround updateDivy Le Ray
Update the MAC workaround to deal with switches that do not honor pause frames. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[PATCH] drivers/net: remove superfluous memsetMariusz Kozlowski
This patch covers something like this: dev = alloc_*dev(... ... priv = netdev_priv(dev); memset(priv, 0, sizeof(*priv)); The memset() here is superfluous. alloc_netdev() uses kzalloc() to allocate needed memory so there is no need to zero the priv region twice. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10Clean up duplicate includes in drivers/net/Jesper Juhl
This patch cleans up duplicate includes in drivers/net/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[netdrvr] ns83820: add ethtool media supportJeff Garzik
Split out from patch authored by Dan Faerch <dan@hacker.dk>. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10net/tulip/xircom_cb.c: remove superfulous priv assignmentMariusz Kozlowski
Unpatched version does sth like this: dev = alloc_etherdev(... private = netdev_priv(dev); ... dev->priv = private; which doesn't make much sense (does it?) because this is done in alloc_netdev() already. struct net_device *alloc_netdev(... { ... if (sizeof_priv) dev->priv = netdev_priv(dev); This patch removes superfluous code. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/tulip/xircom_cb.c | 32853 -> 32831 (-22 bytes) drivers/net/tulip/xircom_cb.o | 123984 -> 123984 (0 bytes) drivers/net/tulip/xircom_cb.c | 1 - 1 file changed, 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10S2IO: Fixed Link LED issue when MSI-X is enabledSivakumar Subramani
-Fixed Link LED issue when MSI-X is enabled. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10S2IO: Fixes in MSIX related code.Sivakumar Subramani
- Calling store_xmsi_data to store the MSI-X datas during initialization in s2io-init_nic function - Disabling NAPI when MSI-X is enabled - Freeing sp->entries and sp->s2io_entries in s2io_rem_isr Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[S2IO]: Making MSIX as default intr_typeSivakumar Subramani
- Making MSIX as default intr_type - Driver will test MSI-X by issuing test MSI-X vector and if fails it will fallback to INTA Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[8139too]: tab-align enums and structs; remove dead codeJeff Garzik
* (main change) tab-align hardware register value enums, and hw struct * MMIO_FLUSH_AUDIT_COMPLETE has been defined to 1 for a while. Remove the code activated when it is set to zero. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[netdrvr] 8139cp, 8139too: convert to generic DMAJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/via-velocity.c: mostly kmalloc + memset conversion to kcallocMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/via-velocity.c | 88263 -> 88120 (-143 bytes) drivers/net/via-velocity.o | 254264 -> 253828 (-436 bytes) drivers/net/via-velocity.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/sb1250-mac.c: kmalloc + memset conversion to kcallocMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/sb1250-mac.c | 76286 -> 76199 (-87 bytes) drivers/net/sb1250-mac.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 16:30:16 +0000