aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-28ARM: OMAP2/3: Add generic smc91x support when connected to GPMCTony Lindgren
Convert the board-rx51 smc91x code to be generic and make the boards to use it. This allows future recalculation of the timings when the source clock gets scaled. Also correct the rx51 interrupt to be IORESOURCE_IRQ_HIGHLEVEL. Thanks to Paul Walmsley <paul@pwsan.com> for better GPMC timing calculations. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP2/3: Add generic onenand support when connected to GPMCJuha Yrjola
Add generic onenand support when connected to GPMC and make the boards to use it. The patch has been modified to make it more generic to support all the boards with GPMC. The patch also remove unused prototype for omap2_onenand_rephase(void). Note that board-apollon.c is currently using the MTD_ONENAND_GENERIC and setting the GPMC timings in the bootloader. Setting the GPMC timings in the bootloader will not allow supporting frequency scaling for the onenand source clock. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP2/3: sDMA: Correct omap_request_dma_chain(), v2Santosh Shilimkar
Original OMAP DMA chaining design had chain_id as one of the callback parameters. Patch 538528de0cb256f65716ab2e9613d9e920f97fe2 changed it to use logical channel instead. Correct the naming for callback to also use logical channel number instead of the chain_id. More details are on this email thread: http://marc.info/?l=linux-omap&m=122961071931459&w=2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP2/3: DMA: implement trans copy and const fillTomi Valkeinen
Implement transparent copy and constant fill features for OMAP2/3. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP1: Misc clean-upTony Lindgren
Remove unnecessary Kconfig line and allow compile of MBOX_FWK. Also allow building USB on Nokia 770. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Update contact address of I2C registration helperJarkko Nikula
This email address is going to expire soon so update it. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: McBSP: Fix legacy interrupts to clear their statusEero Nurkkala
If XSYNCERR or RSYNCERR interrupts are enabled, they are never cleared causing the IRQ handler to be continuously called. This patch clears the IRQs in question in the event they are enabled and taken. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Increase VMALLOC_END to allow 256MB RAMMans Rullgard
This increases VMALLOC_END to 0x18000000, making room for 256MB RAM with the default 128MB vmalloc region. Note that after this patch there's no longer a hole between vmalloc space and the beginning of IO space on omap2 as the first virtual mapping starts at 0xd8000000. Also fold in a related change from Paul Walmsley <paul@pwsan.com> to change the OMAP2_SRAM addresses accordingly. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Remove unnecessary omap2_globals.Santosh Shilimkar
This patch removes unnecessary omap2_globals and pass the global structures directly as function argument. The proposed cleanup was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Remove useless omap_sram_error function.Santosh Shilimkar
This patch removes fixes omap_sram_error() function and replace the error paths with BUG_ON. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Remove unwanted type casts and fix the compiler warning.Santosh Shilimkar
This patch fixes the compiler warning "assignment from incompatible pointer type" in dmtimer.c and removes the tye casts. These warnings were suppressed by type catsing. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP2/3: Reorganize Makefile to add omap4 supportTony Lindgren
We don't necessarily want to compile in irq.o and sdrc.o for omap4. Also, clock and prcm may not be implemented initially. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP2/3: Remove OMAP_CM_REGADDRTony Lindgren
Processor specific macros should be used instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP2/3: Remove OMAP2_PRCM_BASETony Lindgren
It's currently unused, and processor specific defines should be used instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP2/3: Move define of OMAP2_VA_IC_BASE to be local to entry-macro.STony Lindgren
Move define of OMAP2_VA_IC_BASE to be local to entry-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASETony Lindgren
Remove OMAP_PRM_REGADDR and use processor specific defines instead. Also fold in a patch from Kevin Hilman to add _OFFSET #defines for the PRCM registers to be used with the prm_[read|write]_* macros. These are used extensively in the forthcoming OMAP PM support. Also remove now unused OMAP2_PRM_BASE. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP2/3: Remove OMAP2_32KSYNCT_BASETony Lindgren
Use processor specific defines instead. As an extra bonus, this patch fixes the problem of CONFIG_DEBUG_SPINLOCK calling sched_clock before we have things initialized: http://patchwork.kernel.org/patch/15810/ Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-23Linux 2.6.30-rc7Linus Torvalds
2009-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt2sas: fix driver version inconsistency [SCSI] 3w-xxxx: scsi_dma_unmap fix [SCSI] 3w-9xxx: scsi_dma_unmap fix [SCSI] ses: fix problems caused by empty SES provided name [SCSI] fc-transport: Close state transition-window during rport deletion. [SCSI] initialize max_target_blocked in scsi_alloc_target [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA
2009-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Avoid open on possible directories since Samba now rejects them
2009-05-23[CIFS] Avoid open on possible directories since Samba now rejects themSteve French
Small change (mostly formatting) to limit lookup based open calls to file create only. After discussion yesteday on samba-technical about the posix lookup regression, and looking at a problem with cifs posix open to one particular Samba version, Jeff and JRA realized that Samba server's behavior changed in this area (posix open behavior on files vs. directories). To make this behavior consistent, JRA just made a fix to Samba server to alter how it handles open of directories (now returning the equivalent of EISDIR instead of success). Since we don't know at lookup time whether the inode is a directory or file (and thus whether posix open will succeed with most current Samba server), this change avoids the posix open code on lookup open (just issues posix open on creates). This gets the semantic benefits we want (atomicity, posix byte range locks, improved write semantics on newly created files) and file create still is fast, and we avoid the problem that Jeff noticed yesterday with "openat" (and some open directory calls) of non-cached directories to one version of Samba server, and will work with future Samba versions (which include the fix jra just pushed into Samba server). I confirmed this approach with jra yesterday and with Shirish today. Posix open is only called (at lookup time) for file create now. For opens (rather than creates), because we do not know if it is a file or directory yet, and current Samba no longer allows us to do posix open on dirs, we could end up wasting an open call on what turns out to be a dir. For file opens, we wait to call posix open till cifs_open. It could be added here (lookup) in the future but the performance tradeoff of the extra network request when EISDIR or EACCES is returned would have to be weighed against the 50% reduction in network traffic in the other paths. Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Tested-by: Jeff Layton <jlayton@redhat.com> CC: Jeremy Allison <jra@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-22icom: fix rmmod crashBreno Leitao
Actually the icom driver is crashing when is being removed because the driver is kfreeing the adapter structure before calling pci_release_regions(), which result in the following error: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33 Faulting instruction address: 0xc000000000246b80 Oops: Kernel access of bad area, sig: 11 [#1] .... [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable) [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68 [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom] [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94 [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom] [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90 [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4 [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80 [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8 [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom] [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8 [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40 Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: stable@kernel.org Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control name ALSA: hda - fix audio on HP TX25xx series notebooks ALSA: pcsp - fix printk format warning again
2009-05-22Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control name ALSA: pcsp - fix printk format warning again
2009-05-22ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control nameAndreas Mohr
ALSA sound/core/control.c:232: Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback ' bootup message by omitting weird Sigmatel prefix in this case; also fix up the related ca0106 mixer control removal part by using identical naming there. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix memory leak in nilfs_ioctl_clean_segments
2009-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: via82cxxx: Add VIA VX855 PCI Device ID ide: report timeouts in ide_busy_sleep() ide: improve failed opcode reporting ide: fix printk() levels in ide_dump_ata[pi]_error() ide: fix OOPS during ide-cd error recovery ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)
2009-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] fix posix open regression
2009-05-22Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: IP32: Remove unnecessary if not even harmful volatile keywords. MIPS: IP32: Fix build error due to uninitialized variable. MIPS: Fix sparse warning in incompatiable argument type of clear_user.
2009-05-22Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/maple: Add a quirk to disable MSI for IPR on Bimini
2009-05-22Merge branch 'sh/for-2.6.30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: video: stop sh_mobile_lcdcfb only if started sh: ap325 camera without i2c driver fix
2009-05-22ipmi: fix ipmi_si modprobe hangCorey Minyard
Instead of queuing IPMB messages before channel initialization, just throw them away. Nobody will be listening for them at this point, anyway, and they will clog up the queue and nothing will be delivered if we queue them. Also set the current channel to the number of channels, as this value is used to tell if the channel information has been initialized. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Ferenc Wagner <wferi@niif.hu> Cc: Dan Frazier <dannf@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-22via82cxxx: Add VIA VX855 PCI Device IDHarald Welte
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: report timeouts in ide_busy_sleep()Bartlomiej Zolnierkiewicz
* change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: improve failed opcode reportingBartlomiej Zolnierkiewicz
Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix printk() levels in ide_dump_ata[pi]_error()Bartlomiej Zolnierkiewicz
Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix OOPS during ide-cd error recoveryBartlomiej Zolnierkiewicz
On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)Bartlomiej Zolnierkiewicz
Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22MIPS: IP32: Remove unnecessary if not even harmful volatile keywords.Ralf Baechle
They are unneeded and as the issue fixed in lmo commit 63f7ec59053e3f850ab67a9938e631bcba64c6ce shows even harmful. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-22MIPS: IP32: Fix build error due to uninitialized variable.Ralf Baechle
CC arch/mips/sgi-ip32/ip32-reset.o cc1: warnings being treated as errors arch/mips/sgi-ip32/ip32-reset.c: In function 'debounce': arch/mips/sgi-ip32/ip32-reset.c:97: error: 'reg_a' is used uninitialized in this function The issues is old but due to the volatile keyword gcc older than 4.4 did not warn about this obvious bug. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-22MIPS: Fix sparse warning in incompatiable argument type of clear_user.Wu Zhangjin
The type of the second argument of access_ok should be (void __user *). The unnecessary conversion of the clear_user address argument was causing sparse to emit warnings on the __chk_user_ptr check. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-22nilfs2: fix memory leak in nilfs_ioctl_clean_segmentsRyusuke Konishi
This fixes a new memory leak problem in garbage collection. The problem was brought by the bugfix patch ("nilfs2: fix lock order reversal in nilfs_clean_segments ioctl"). Thanks to Kentaro Suzuki for finding this problem. Reported-by: Kentaro Suzuki <k_suzuki@ms.sylc.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-22Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - fix audio on HP TX25xx series notebooks
2009-05-22ALSA: hda - fix audio on HP TX25xx series notebooksAdam Williamson
Fixes https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4121 Taken from https://bugzilla.redhat.com/show_bug.cgi?id=498060 Signed-off-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-22powerpc/maple: Add a quirk to disable MSI for IPR on BiminiMichael Ellerman
Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-22video: stop sh_mobile_lcdcfb only if startedMagnus Damm
This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: ap325 camera without i2c driver fixMagnus Damm
This patch fixes the ap325rxa ncm03j camera code to handle the case where no i2c driver is present. Without this fix i2c_transfer() may be passed NULL as adapter which results in a crash. Triggered when i2c-sh_mobile.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-21[CIFS] fix posix open regressionSteve French
Posix open code was not properly adding the file to the list of open files. Fix allocating cifsFileInfo more than once, and adding twice to flist and tlist. Also fix mode setting to be done in one place in these paths. Signed-off-by: Steve French <sfrench@us.ibm.com> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Tested-by: Jeff Layton <jlayton@redhat.com> Tested-by: Luca Tettamanti <kronos.it@gmail.com>
2009-05-21hugh: update email addressHugh Dickins
My old address will shut down in a few days time: remove it from the tree, and add a tmpfs (shmem filesystem) maintainer entry with the new address. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI PM: Fix initialization and kexec breakage for some devices
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 07:59:22 +0000