aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-10gigaset: return -ENOTTY for unimplemented functionsPaul Bolle
A number of functions in the usb_gigaset module will return -EINVAL if CONFIG_GIGASET_UNDOCREQ is not set. Make these return -ENOTTY as it's more specific and it might make it easier to see (from userspace) why these functions actually fail. Impact: some error return codes changed Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10gigaset: Kconfig cleanupTilman Schmidt
Streamline dependencies and remove some obsolete or redundant comments in the Gigaset ISDN driver's Kconfig file. In particular, remove the strong warning against the GIGASET_UNDOCREQ option, as in seven years of existence, the code in question has never been reported to cause any harm. Impact: Kconfig cleanup, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10netxen: annotate board_config and board_typeDhananjay Phadke
Remove huge board config structure from each instance, read only necessary fields from flash. Replace board_type with port_type (1G/10G), there's another board_type field describing card type (SFP/XFP/CX4). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10netxen: cleanup superfluous multi-context codeDhananjay Phadke
MAX_RCV_CTX was set to 1, there's only rx context per PCI function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10netxen: refactor netdev open closeDhananjay Phadke
rearrange open and close into hardware attach(), detach() and nic up() and down(). this will be used for suspend/resume subsequently. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10netxen: small xmit optimizationsDhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10netxen: cleanup rx handlingDhananjay Phadke
o remove unused rx fragment handling code. o imporove check for status descriptor ownership. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c drivers/net/wireless/iwlwifi/iwl3945-base.c drivers/net/wireless/rt2x00/rt73usb.c
2009-03-10bnx2x: Using DMAE to initialize the chipEilon Greenstein
There was a bug, which occasionally caused failure in PRAM initialization after the cold boot. Also incremented version number to 1.45.27. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10bnx2x: Casting page alignmentEilon Greenstein
Adding a proper cast to the argument of PAGE_ALIGN macro so that the output won't depend on its original type. Without this cast aligned value will be truncated to the size of the argument type. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10bnx2x: Adding restriction on sge_buf_sizeEilon Greenstein
sge_buff_size may not be more than 0xffff. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Fix endian issue related to rx buffers.Ron Mercer
This was introduced in an earlier net-next patch. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer
With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer
Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Remove spinlock from asic init path.Ron Mercer
There is nothing to contend with it. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Clear shadow registers before use.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Get rid of irqsave/restore in intr disable.Ron Mercer
The completion interrupt disable routine is only called from the ISR, so there is no need for irqsave/restore. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Tell hw to strip vlan header.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Add tx multiqueue support.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Add support for GRO.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Increase filtering for inbound csum settings.Ron Mercer
Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Remove debug junk from asic reset logic.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Move reset logic into asic_reset_worker func.Ron Mercer
Get rid of extraneous ql_cycle_adapter. It's only called from the one place. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-06p54: fix race condition in memory managementChristian Lamparter
This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-06cfg80211: test before subtraction on unsignedRoel Kluin
freq_diff is unsigned, so test before subtraction Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05b43: Fix compilation for devices without PCI coreMichael Buesch
This fixes compilation, if the PCI core is disabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add a debugfs interface for controlling virtual wiphysJouni Malinen
debugfs ath9k/phy#/wiphy can be used to show the current list of virtual wiphys and to add/remove virtual wiphys. Eventually, this interface could be replaced with a cfg80211/nl80211 command that is passed through mac80211. For example: # cat /debug/ath9k/phy0/wiphy primary: phy0 # echo add > /debug/ath9k/phy0/wiphy # cat /debug/ath9k/phy0/wiphy primary: phy0 secondary: phy1 # echo del=phy1 > /debug/ath9k/phy0/wiphy # cat /debug/ath9k/phy0/wiphy primary: phy0 In addition, following commands can be used to test pausing and unpausing of the virtual wiphys: pause=phy1 unpause=phy1 select=phy1 (select pauses and unpauses wiphys automatically based on channel) schedule=500 (set wiphy scheduling interval in msec; 0 = disable; default value: 500) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add a simple virtual wiphy schedulerJouni Malinen
This is a very simple scheduler that goes through the wiphys and schedules one at a time every N milliseconds (current default value: 500 ms). This is enough for initial testing, but there are number of areas where a more complex scheduler can improve operations greatly. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Special processing for channel changes during scanJouni Malinen
Allow mac80211-controlled channel changes on an active wiphy and especially during a scan. We need this as long as the scan is controlled by mac80211. Moving this control into the driver could allow some optimizations on scanning while using multiple virtual interfaces, but for now, try to work as well as possible with the current scan mechanism. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add workaround to recover from failed channel changesJouni Malinen
It looks like channel change may fail in some cases and end up leaving the hardware in state where it cannot transmit any frames. Add a workaround to recover from this state if we detect that wiphy selection is failing due to wiphys not leaving PAUSING state. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Check virtual wiphy state on tx()Jouni Malinen
mac80211 should not be requesting us to transmit frames on paused wiphys since we stop the TX queues. Just in case, add debug code to make sure we catch if this were to happen. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Pause other virtual wiphys on channel changeJouni Malinen
For now, allow channel changes immediately and just force the other virtual wiphys to paused state. This is needed to allow mac80211-controlled scan to control channel changes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Register larger listen intervalJouni Malinen
Notify the AP that we may be sleeping longer to allow the AP power save code to buffer larger number of frames for us when using virtual wiphys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Make start/stop operations aware of virtual wiphysJouni Malinen
Instead of always going through initialization/deinitialization steps, do this only for the first/last wiphy to not break the other wiphys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add routines for switching between active virtual wiphysJouni Malinen
ath9k_wiphy_select() can be used to select a virtual wiphy to be activated. Other virtual wiphys will be paused and once that is done, the operational channel is changed and the wiphys that are on the selected channel will be unpaused. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Virtual wiphy pause/unpause functionalityJouni Malinen
Allow virtual wiphys to be paused/unpaused to allow off-channel operations. Pause will stop all TX queues for the wiphy and move the STA into power save mode if in managed mode. Unpause wakes up the TX queues and notifies the AP that the STA woke up if in managed mode. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Configure RX filter for multi-BSSID broadcastJouni Malinen
Allow RX filter to pass through all broadcast/multicast frames (i.e., no BSSID filtering) if virtual interfaces are used. Software filtering will be used in this case to drop broadcast/multicast frames for foreign BSSIDs. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add support for multiple secondary virtual wiphysJouni Malinen
The new struct ath_softc::sec_wiphy array is used to store information about virtual wiphys and select which wiphy is used in calls to mac80211. Each virtual wiphy will be assigned a different MAC address based on the virtual wiphy index. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add data structure for supporting virtual radio/wiphy operationJouni Malinen
This is the initial step in allowing ath9k to register multiple virtual radios (wiphys). The goal of virtual radios is to allow the same radio to be shared for multiple virtual interfaces that may operate on different channels. The mac80211 virtual interface support is designed only for single channel operation and as such, it is not suitable for this type of use. Anyway, it can be used on top of the virtual radio concept, if desired (e.g., use two virtual radios to handle two channels and then add multiple mac80211 virtual interfaces on top of each virtual radio). The new struct ath_wiphy is now registered as the driver data structure for wiphy. This structure has a pointer to the shared (among virtual wiphys of the same physical radio) struct ath_softc data. The primary wiphy maintains the allocated memory for ath_softc. Secondary (virtual) wiphys will only allocate the new ath_wiphy structure. Registration of secondary wiphys is added in a separate patch. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Set BSSID mask based on configured interfacesJouni Malinen
Instead of using a hardcoded BSSID mask (mask for own addresses), iterate through all active interfaces and determine the minimal mask that covers all local addresses. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Cleanup multiple VIF processingJouni Malinen
Replace the internal sc_vaps array and index values by using vif pointer from mac80211. Allow multiple VIPs to be registered. Though, number of beaconing VIFs is still limited by ATH_BCBUF (currently 1). Multiple virtual STAs support is not yet complete, but at least the data structures should now be able to handle this. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05rt2x00: Export all register stats through debugfsIvo van Doorn
By exporting the register base, and word size to userspace through debugfs it will be easier to create scripts which parse the register information. This makes debugging and register dumps information easier. This will break my previous scripts which dumped and parsed all information, but since this is only for debugging purposes this change should not be a problem. Dumpfiles created with the old version can be easily manually edited to make them compatible with this new approach, which means there will be no problems comparing dumps from the different versions either. Also be more consistent with using tabs to seperate different fields. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Clean up setkey operationsJouni Malinen
There is no need to use ath_keyset() wrapper for ath9k_hw_set_keycache_entry() calls. In addition, improve the comments describing the key setting operations. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: fix AR_TXCFG_DMASZ_MASK valueGabor Juhos
The current bitmask is invalid, because the tx dma size is a 3 bit wide value. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Remove unused variables in struct ath_beacon_configSujith
We don't store the beacon timestamp internally, nor do we do any TIM handling in ath9k. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Lock config_interface() callback with a mutexSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Handle TSF properly for AP modeSujith
The TSF has to be reset only once, upon bringing the interface up in AP mode. For any beacon reconfigure calls after that, resetting the TSF results in incorrect beacon generation. The only exception is a change in the beacon interval, which is indicated to the driver by mac80211 through IEEE80211_CONF_CHANGE_BEACON_INTERVAL, handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Split beacon configuration into mode specific routinesSujith
This makes the code easier to understand. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Cleanup beacon stuck processingSujith
We never use SC_OP_NO_RESET, it is not configurable at all. Remove all code that deals with this flag and make beacon stuck processing simple. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Scrub beacon.cSujith
Remove useless comments, fix indentation. Also, remove all occurrences of ASSERT(vif) which are not needed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 15:04:27 +0000