aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-14netxen: handle dma mapping failuresDhananjay Phadke
o Bail out if pci_map_single() fails while replenishing rx ring. o Drop packet if pci_map_{single,page}() fail in tx. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: hold tx lock while sending firmware commandsDhananjay Phadke
Some firmware commands like mac address addition/deletion are sent on the transmit ring. So need to hold the tx lock before touching tx producer/consumer indices. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: cleanup mac list on driver unloadDhananjay Phadke
This fixes a tiny memory leak when driver is unloaded. The mac address list maintained in netxen_adapter needs to deleted when driver is going down. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: firmware init fixDhananjay Phadke
o Fix order or rom register writes. o Reduce udelays when writing rom registers. This cuts the firmware init time by 40%. o Do not reset core/memory clocks when reinitializing driver. Firmware willl handle this when initialized. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix link speed reporting for some boardsDhananjay Phadke
o Read negotiated link speed when link state changes. o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and 10Gbps ports. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix ipv6 offload and tx cleanupDhananjay Phadke
o fix the ip/tcp hdr offset in tx descriptors for ipv6. o cleanup xmit function, move the tso checks into separate function, this reduces unnecessary endian conversions back and forth. o optimize macros to initialize tx descriptors. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix endianness in firmware commandsDhananjay Phadke
o Set restricted (little endian) data types in firmware command requests and responses. o Remove unnecessary conversion to LE when writing registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14sis900: generate fake MAC address if the hardware doesn't have oneDaniele Venzano
The attached patch modifies the sis900 driver when the MAC address read from the hardware is invalid. As suggested, the patch now generates a random address so that the user can go on and use the hardware. In any case a message is also shown to warn on the unexpected condition. This seems to happen with newer HW implementation of the sis900 chipset, since this never came up before. Patch is against vanilla 2.6.28 (but the driver doesn't change so often, so it will probably apply to older/newer versions too). See bugzilla ID 10201 and 11649 and ignore the previous patch. Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14powerpc/fs_enet: Add missing irq free in error path.Mike Ditto
If something goes wrong attaching to phy driver, we weren't freeing the IRQ. Signed-off-by: Mike Ditto <mditto@consentry.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gso: Ensure that the packet is long enoughHerbert Xu
When we get a GSO packet from an untrusted source, we need to ensure that it is sufficiently long so that we don't end up crashing. Based on discovery and patch by Ian Campbell. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Fix page ref count for skbs freed normallyHerbert Xu
When an skb with page frags is merged into an existing one, we cannibalise its reference count. This is OK when the skb is reused because we set nr_frags to zero in that case. However, for the case where the skb is freed through kfree_skb, we didn't clear nr_frags which causes the page to be freed prematurely. This is fixed by moving the skb resetting into skb_gro_receive. Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14xfrm: For 32/64 compatability wrt. xfrm_usersa_infoDavid S. Miller
Reported by Jiri Klimes. Fix suggested by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14i4l: minor cleanupsPaul Bolle
Minor cleanups, either made possible or obvious after commit d700555 (I4l: convert to net_device_ops). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14i4l: do not print a warning when shutting down an i4l ppp interfacePaul Bolle
When an i4l ppp interface is shut down (e.g. with /sbin/ifdown ippp0) a scary warning is logged: isdn_free_channel: called with invalid drv(-1) or channel(-1) This warning is caused by isdn_net_unbind_channel(), which always calls isdn_free_channel() even if isdn_net_local->isdn_device and isdn_net_local->isdn_channel are (still) in a perfectly acceptable default state, so let's not do that. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14phylib: Fix Freescale TBI PHY detectionAnton Vorontsov
Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of commit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Author: Giulio Benetti <giulio.benetti@micronovasrl.com> Date: Thu Nov 13 21:53:13 2008 +0000 phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in gianfar driver failure to see the TBI PHYs. This code snippet triggers: if (!priv->tbiphy) { printk(KERN_WARNING "SGMII mode requires that the device " "tree specify a tbi-handle\n"); return; } Although tbi-handle is specified in the device tree. Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY manufactured by Xerox :-). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Check for GSO packets and packets with frag_listHerbert Xu
As GRO cannot be applied to packets with frag_list we need to make sure that we reject such packets if they are fed to us, e.g., through a tunnel device. Also there is no point in applying GRO on GSO packets so they too should be rejected. This allows GRO to be used in virtio-net which may produce GSO packets directly but may still benefit from GRO if the other end of it doesn't support GSO. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14ARM etherh: Fix build failure.David S. Miller
Reported by Russell King: drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13ipv6: Fix fib6_dump_table walker leakHerbert Xu
When a fib6 table dump is prematurely ended, we won't unlink its walker from the list. This causes all sorts of grief for other users of the list later. Reported-by: Chris Caputo <ccaputo@alt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13tcp: splice as many packets as possible at onceWilly Tarreau
As spotted by Willy Tarreau, current splice() from tcp socket to pipe is not optimal. It processes at most one segment per call. This results in low performance and very high overhead due to syscall rate when splicing from interfaces which do not support LRO. Willy provided a patch inside tcp_splice_read(), but a better fix is to let tcp_read_sock() process as many segments as possible, so that tcp_rcv_space_adjust() and tcp_cleanup_rbuf() are called less often. With this change, splice() behaves like tcp_recvmsg(), being able to consume many skbs in one system call. With typical 1460 bytes of payload per frame, that means splice(SPLICE_F_NONBLOCK) can return 16*1460 = 23360 bytes. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-13p54: fix "‘ret’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’: drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13iwl3945: fix "‘power_idx’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/iwlwifi/iwl-3945.c: In function ‘iwl3945_txpower_set_from_eeprom’: drivers/net/wireless/iwlwifi/iwl-3945.c:2222: warning: ‘power_idx’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13b43legacy: fix "‘up_dev’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’: drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13b43: fix "‘gmode’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/b43/main.c: In function ‘b43_op_config’: drivers/net/wireless/b43/main.c:3264: warning: ‘gmode’ may be used uninitialized Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13mac80211: fix "‘ret’ may be used uninitialized" warningJohn W. Linville
net/mac80211/ht.c: In function ‘ieee80211_start_tx_ba_session’: net/mac80211/ht.c:472: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12net: ppp_generic - fix regressions caused by IDR conversionCyrill Gorcunov
The commits: 7a95d267fb62cd6b80ef73be0592bbbe1dbd5df7 ("net: ppp_generic - use idr technique instead of cardmaps") ab5024ab23b78c86a0a1425defcdde48710fe449 ("net: ppp_generic - use DEFINE_IDR for static initialization") introduced usage of IDR functionality but broke userspace side. Before this commits it was possible to allocate new ppp interface with specified number. Now it fails with EINVAL. Fix it by trying to allocate interface with specified unit number and return EEXIST if fail which allow pppd to ask us to allocate new unit number. And fix messages on memory allocation fails - add details that it's PPP module who is complaining. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12gianfar: Fix soft lockup with multi-interrupt TSECsAnton Vorontsov
This patch fixes following bug: BUG: soft lockup - CPU#0 stuck for 61s! [S03mountvirtfs-:922] Modules linked in: NIP: c006505c LR: c00675f0 CTR: c0020438 REGS: c7a1db90 TRAP: 0901 Not tainted (2.6.28-rc8-01311-g8c7396a) MSR: 00009032 <EE,ME,IR,DR> CR: 28248442 XER: 20000000 TASK = c7a288a0[922] 'S03mountvirtfs-' THREAD: c7a1c000 GPR00: 00009032 c7a1dc40 c7a288a0 00000024 c79a1840 00000000 00000300 00000020 GPR08: c035f97c 00000000 00004008 c04d5210 00000000 NIP [c006505c] handle_IRQ_event+0x34/0xb0 LR [c00675f0] handle_level_irq+0xa8/0x144 Call Trace: [c7a1dc40] [c00204d8] ipic_mask_irq+0xa0/0xb4 (unreliable) [c7a1dc60] [c00675f0] handle_level_irq+0xa8/0x144 [c7a1dc80] [c00067f8] do_IRQ+0x78/0x108 [c7a1dc90] [c0014d7c] ret_from_except+0x0/0x14 --- Exception: 501 at gfar_schedule_cleanup+0x54/0x7c LR = gfar_transmit+0x14/0x28 [c7a1dd50] [c0352a3c] _spin_unlock_irqrestore+0x18/0x30 (unreliable) [c7a1dd60] [c01f49a8] gfar_transmit+0x14/0x28 [c7a1dd70] [c0065084] handle_IRQ_event+0x5c/0xb0 [c7a1dd90] [c00675f0] handle_level_irq+0xa8/0x144 [c7a1ddb0] [c00067f8] do_IRQ+0x78/0x108 [c7a1ddc0] [c0014d7c] ret_from_except+0x0/0x14 --- Exception: 501 at up_read+0x10/0x48 LR = do_page_fault+0x2b0/0x3e0 [c7a1de80] [c7a177e8] 0xc7a177e8 (unreliable) [c7a1de90] [c0017964] do_page_fault+0x2b0/0x3e0 [c7a1df40] [c0014b14] handle_page_fault+0xc/0x80 --- Exception: 301 at 0xfe98b7c LR = 0xfe989c0 Instruction dump: 7c0802a6 bf810010 7c9f2378 7c7c1b78 90010024 80040004 70090020 40820010 7c0000a6 60008000 7c000124 3bc00000 <3ba00000> 48000010 83ff0014 2f9f0000 The bug introduced by commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844 ("gianfar: Merge Tx and Rx interrupt for scheduling clean up ring"). The commit merged TX and RX interrupt code into a single routine that schedules NAPI, but no locks were introduced. This causes irq races, so when irqs are enabled and netif_rx_schedule_prep() returns 0, nobody disable the interrupts again. This leads to interrupt storm and finally to the lockup. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12hso: driver fix for big endian machines.Denis Joseph Barrow
Filip Aben says this fix is neccessary for big endian machines. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12pkt_sched: sch_htb: Break all htb_do_events() after 2 jiffiesJarek Poplawski
Currently htb_do_events() breaks events recounting for a level after 2 jiffies, but there is no reason to repeat this for next levels and increase delays even more (with softirqs disabled). htb_dequeue_tree() can add to this too, btw. In such a case q->now time is invalid anyway. Thanks to Patrick McHardy for spotting an error around earlier version of this patch. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12pkt_sched: sch_htb: Consider used jiffies in htb_do_events()Jarek Poplawski
Next event time should consider jiffies used for recounting. Otherwise qdisc_watchdog_schedule() triggers hrtimer immediately with the event in the past, and may cause very high ksoftirqd cpu usage (if highres is on). There is also removed checking "event" for zero in htb_dequeue(): it's always true in this place. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 09/09: remove padding from struct xt_match on 64bit buildsRichard Kennedy
reorder struct xt_match to remove 8 bytes of padding and make its size 128 bytes. This saves a small amount of data space in each of the xt netfilter modules and fits xt_match in one 128 byte cache line. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 08/09: xt_time: print timezone for user informationJan Engelhardt
netfilter: xt_time: print timezone for user information Let users have a way to figure out if their distro set the kernel timezone at all. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 07/09: simplify nf_conntrack_alloc() error handlingJulia Lawall
nf_conntrack_alloc cannot return NULL, so there is no need to check for NULL before using the value. I have also removed the initialization of ct to NULL in nf_conntrack_alloc, since the value is never used, and since perhaps it might lead one to think that return ct at the end might return NULL. The semantic patch that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match exists@ expression x, E; position p1,p2; statement S1, S2; @@ x@p1 = nf_conntrack_alloc(...) ... when != x = E ( if (x@p2 == NULL || ...) S1 else S2 | if (x@p2 == NULL && ...) S1 else S2 ) @other_match exists@ expression match.x, E1, E2; position p1!=match.p1,match.p2; @@ x@p1 = E1 ... when != x = E2 x@p2 @ script:python depends on !other_match@ p1 << match.p1; p2 << match.p2; @@ print "%s: call to nf_conntrack_alloc %s bad test %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 06/09: nf_conntrack: fix ICMP/ICMPv6 timeout sysctls on big-endianPatrick McHardy
An old bug crept back into the ICMP/ICMPv6 conntrack protocols: the timeout values are defined as unsigned longs, the sysctl's maxsize is set to sizeof(unsigned int). Use unsigned int for the timeout values as in the other conntrack protocols. Reported-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 05/09: ebtables: fix inversion in match codeJan Engelhardt
Commit 8cc784ee (netfilter: change return types of match functions for ebtables extensions) broke ebtables matches by inverting the sense of match/nomatch. Reported-by: Matt Cross <matthltc@us.ibm.com> Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 04/09: x_tables: fix match/target revision lookupPatrick McHardy
Commit 55b69e91 (netfilter: implement NFPROTO_UNSPEC as a wildcard for extensions) broke revision probing for matches and targets that are registered with NFPROTO_UNSPEC. Fix by continuing the search on the NFPROTO_UNSPEC list if nothing is found on the af-specific lists. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 03/09: bridge: Disable PPPOE/VLAN processing by defaultHerbert Xu
The PPPOE/VLAN processing code in the bridge netfilter is broken by design. The VLAN tag and the PPPOE session ID are an integral part of the packet flow information, yet they're completely ignored by the bridge netfilter. This is potentially a security hole as it treats all VLANs and PPPOE sessions as the same. What's more, it's actually broken for PPPOE as the bridge netfilter tries to trim the packets to the IP length without adjusting the PPPOE header (and adjusting the PPPOE header isn't much better since the PPPOE peer may require the padding to be present). Therefore we should disable this by default. It does mean that people relying on this feature may lose networking depending on how their bridge netfilter rules are configured. However, IMHO the problems this code causes are serious enough to warrant this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 02/09: bridge: Fix handling of non-IP packets in FORWARD/POST_ROUTINGHerbert Xu
Currently the bridge FORWARD/POST_ROUTING chains treats all non-IPv4 packets as IPv6. This packet fixes that by returning NF_ACCEPT on non-IP packets instead, just as is done in PRE_ROUTING. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 01/09: remove "happy cracking" messagePatrick McHardy
Don't spam logs for locally generated short packets. these can only be generated by root. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12net: Fix a comment in include/linux/netdevice.h.Krzysztof Hałasa
Fix a comment in include/linux/netdevice.h. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12WAN: Fix NAPI interface in IXP4xx HSS driver.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12async: fix __lowest_in_progress()Arjan van de Ven
At 37000 feet somewhere near Greenland I woke up from a half-sleep with the realisation that __lowest_in_progress() is buggy. After landing I checked and there were indeed 2 problems with it; this patch fixes both: * The order of the list checks was wrong * The locking was not correct. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12script: improve markup_oops.pl to also decode oopses in modulesArjan van de Ven
There has been some light flamewar on lkml about decoding oopses in modules (as part of the crashdump flamewar). Now this isn't rocket science, just the markup_oops.pl script cheaped out and didn't handle modules. But really; a flamewar all about that?? What happened to C++ in the kernel or reading files from inside the kernel? This patch adds module support to markup_oops.pl; it's not the most pretty perl but it works for my testcases... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: add Multi-Tech firmwareChris Adams
Add the Multi-Tech cellular modem firmware to the TI USB serial driver. This firmware was extracted from: ftp://ftp.multitech.com/wireless/wireless_linux.zip Firmware licence: "all firmware components are redistributable in binary form" per support@multitech.com Copyright (C) 2005 Multi-Tech Systems, Inc. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: add Multi-Tech modem supportChris Adams
Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: support alternate firmwareChris Adams
The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12usb-serial: remove NULL checkAlan Cox
Julia Lawell found a case where a NULL check was misplaced in the usb-serial code. However as the object in question cannot be NULL the check can simply be removed. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12neo: Remove a bogus NULL checkAlan Cox
Julia Lawall found an un-needed check in the neo driver. Her patch moves the check to cover the code dereferencing it, however it cannot be NULL anyway so remove the NULL check instead. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12pty: Fix documentationAlan Cox
The pty changes and updates for window sizing forgot to correct the kerneldoc Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kernel/sched.c: add missing forward declaration for 'double_rq_lock' sched: partly revert "sched debug: remove NULL checking in print_cfs_rt_rq()" cpumask: fix CONFIG_NUMA=y sched.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 05:35:33 +0000