aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-13ASoC: Move headset jack registration to device initialization for SDP3430Lopez Cruz, Misael
Move headset jack registration to the codec/machine specific initialization. Having the jack registration in machine init causes that the jack device gets initialized but not registered since the sound card is registered before the jack. Moving jack registration to device initialization will register the jack device along with all other devices associated to the card when the card is registed. As a consequence of jack device registered properly, the jack is detected as an input device. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-12ASoC: Replace remaining uses of snd_soc_cnew with snd_soc_add_controls.Philipp Zabel
The drivers are basically duplicating the same code over and over. As snd_soc_cnew is going to be made static some time after the next merge window, we might as well convert them now. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-12ASoC: Move WM8580 to normal I2C device probeMark Brown
Refactor the WM8580 device registration to probe via standard I2C device registration, registering the DAIs once the device has probed via I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11Merge branch 's3c-iis-header' into for-2.6.30Mark Brown
2009-03-11[ARM] Revert futher extraneous changes from the S3C header moveMark Brown
Can't see any immediate need for these; build tested. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11ASoC: Merge dai_ops factor outMark Brown
Merge Eric Maio's patch to merge snd_soc_dai_ops out of line. Fixed merge issues and updated drivers, plus an issue with the ops for the two s3c2443 AC97 DAIs having been merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11ASoC: Fix formats for s3c24xx-i2s register printsMark Brown
The register values are all u32 so don't need the long format. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11ASoC: Remove version display from WM8580 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11ASoC: Add initial driver for the WM8400 CODECMark Brown
The WM8400 is a highly integrated audio CODEC and power management unit intended for mobile multimedia application. This driver supports the primary audio CODEC features, including: - 1W speaker driver - Fully differential headphone output - Up to 4 differential microphone inputs Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11ASoC: buildfix for OSKDavid Brownell
Buildfix: CC sound/soc/omap/osk5912.o sound/soc/omap/osk5912.c: In function 'osk_soc_init': sound/soc/omap/osk5912.c:189: error: implicit declaration of function 'clk_get_usecount' make[3]: *** [sound/soc/omap/osk5912.o] Error 1 There's no such (standard) clock interface. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11Merge branch 's3c-iis-header' into for-2.6.30Mark Brown
Conflicts: arch/arm/mach-shark/include/mach/io.h
2009-03-11[ARM] Revert extraneous changes from the S3C audio header moveMark Brown
These changes were included in the S3C audio header move but are not directly related to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10ASoC: Fix up merge with the ARM treeMark Brown
The same change has been made with the final lines in slightly differnet orders. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10ASoC: don't touch pxa-ssp registers when stream is runningDaniel Mack
In pxa_ssp_set_dai_fmt(), check whether there is anything to do at all. If there would be but the SSP port is in use already, bail out. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10ALSA: ASoC: Davinci: Updated sffsdr_hw_params() function to new formatHugo Villeneuve
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10ALSA: ASoC: Davinci: Replaced DAI format RIGHT_J by DSP_B for SFFSDRHugo Villeneuve
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10Merge commit 'takashi/topic/asoc' into for-2.6.30Mark Brown
2009-03-09ASoC: Fix Samsung S3C2412_IISMOD_SDF_{MSB,LSB} definitionsBen Dooks
The definitions of S3C2412_IISMOD_SDF_MSB and S3C2412_IISMOD_SDF_LSB are incorrect, being the same S3C2412_IISMOD_SDF_IIS which is the only correct one in this series. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-09ASoC: Convert PXA AC97 driver to probe with the platform deviceMark Brown
This will break any boards that don't register the AC97 controller device due to using ASoC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-09Merge branch 'for-2.6.30' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2009-03-09ASoC: Add a driver for AK4104 S/PDIF transmitterDaniel Mack
This adds a driver for the SPI connected AK4104 S/PDIF transmitter device. Its features are fairly simple, but as there is need to set up certain bits in the IEC958 information, this better goes into a real driver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-09ASoC: Fix Kconfig dependency of CONFIG_SND_S3C24XX_SOC_JIVE_WM8750Takashi Iwai
Remove a non-existing Kconfig CONFIG_SND_SOC_WM8750_SPI. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-08ASoC: Remove unneeded forward reference to WM8753 SPI implementationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-08ASoC: bring cs4270 feature/limitations list in syncDaniel Mack
Removes numbers from the list of features/limitations and makes it reflect recent changes to the code. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-07ASoC: Improve pause/unpause performance in Freescale 8610 driversTimur Tabi
Add support for true pause and unpause. Without this, mplayer will drop some audio (less than one second, but still noticeable) when pausing playback. Remove support for PM suspend and resume from the trigger function, since the driver doesn't support PM anyway. Optimize the delay after starting capture. Instead of delaying 1ms, the driver now polls the hardware. The new delay is shorter by over 90% yet still effective. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-07ASoC: Davinci: Fix incorrect machine type for SFFSDR boardHugo Villeneuve
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix logging severity for some S3C error messagesMark Brown
Upgrade the severity of some failure messages from debug level so they're displayed by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Re-remove hand-rolled pr_debug() macrosMark Brown
The recent set of S3C64xx patches re-added a lot of uses of DBG() that had previously been removed - revert this so the standard pr_debug() macro is used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Staticise workqueue function for GPIO jack detectionMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Blackfin: fix typo in MUTE definitionMike Frysinger
Reported-by: Rob Maris <maris.rob@vdi.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Blackfin: move gpio_err behind the define that is only user of itMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add headset jack detection for SDP3430 machine driverLopez Cruz, Misael
Add headset jack detection for SDP3430 boards using SoC jack reporting interface. Headset detection on SDP3430 board is achieved through TWL4030 GPIO_2 pin. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: add support for SSI asynchronous mode to the Freescale SSI driversTimur Tabi
Add a new device tree property for the SSI node: "fsl,ssi-asynchronous". If defined, the SSI is programmed into asynchronous mode, otherwise it is programmed into synchronous mode. In asynchronous mode, pin SRCK must be connected to the same clock source as STFS, and pin SRFS must be connected to the same signal as STFS. Asynchronous mode allows playback and capture to use different sample sizes. It also technically allows different sample rates, but the driver does not support that. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Update Kconfig for Samsung CPUs to reflect S3C64xx supportMark Brown
We now support the 64xx series as well as the 24xx series - make sure people using Kconfig know this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix memory allocation for snd_soc_dapm_switch namesMark Brown
snd_soc_dapm_switch ends up ends up in dapm_new_mixer() (since a switch is a special case of a mixer with only one input) but this wasn't correctly handled in the code. Also fix the coding style for the switch below while we're here. Reported-by: Joonyoung Shim <dofmind@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: add two more bitfields for PXA SSPDaniel Mack
Add two more bitfields for the PSP register. As they seem to exist for PXA3xx only, define them conditionally. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Factor out DAPM widget power check into separate functionMark Brown
Essentially simple code motion to facilitate refactoring of the power decisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix name of register bit in pxa-sspDaniel Mack
A bit in PXA's SSCR0 register was erroneously named ADC but its name is in fact ACS (audio clock select). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: TWL4030: Make the HS ramp delay configurablePeter Ujfalusi
Enum type for selecting the desired ramp delay for the headset output. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Refresh JIVE driverMark Brown
Remove uneeded startup callback and use snd_soc_dapm_nc_pin() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Select DMA if I2S is configuredBen Dooks
Select the relevant DMA implementation when the sound driver is selected. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add s3c64xx-i2s supportBen Dooks
Add the initial code to support the S3C64XX I2S hardware using the s3c-i2s-v2 core code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Split s3c2412-i2s.c into core and SoC specific partsBen Dooks
The S3C2412 I2S (IIS) interface is replicated on further Samsung SoC parts in a broadly compatible way, so split the common code out into a core called s3c-i2s-v2.[ch] so that the newer SoCs such as the S3C6410 can make use of it. As such, all the original s3c2412 functions are currently being left with their original names, and will be renamed later in the series. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add JIVE audio supportBen Dooks
Add support for the Jive's WM8750 codec attached via the S3C2412 IIS. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add DAPM machine widgets to SDP3430 driverLopez Cruz, Misael
Add DAPM machine domain widgets to SDP3430 machine driver. Interconnection: * Ext Mic: MAINMIC, SUBMIC * Ext Spk: HFL, HFR * Headset Jack: HSMIC, HSOL, HSOR Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06Merge commit 's3c-iis-header' into HEADMark Brown
2009-03-05S3C: Move <mach/audio.h> to <plat/audio.h>Ben Dooks
The <mach/audio.h> file needs to be common to both ARCH_S3C2410 and ARCH_S3C64XX as they share common driver code, so move it to <plat/audio.h>. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-05S3C24XX: Move and update IIS headersBen Dooks
Move the IIS headers to their correct place. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04ASoC: make ops a pointer in 'struct snd_soc_dai'Eric Miao
Considering the fact that most cpu_dai or codec_dai are using a same 'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better made a pointer instead, to make sharing easier and code a bit cleaner. The patch below is rather preliminary since the asoc tree is being actively developed, and this touches almost every piece of code, (and possibly many others in development need to be changed as well). Building of all codecs are OK, yet to every SoC, I didn't test that. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04ASoC: wm8510 pll settingsJonas Andersson
When setting WM8510_MCLKDIV the pll was turned off. When setting pll frequency you got twice the expected freq, because the code calculated with postscaler of 8, but the hardware divide by 4. Signed-off-by: Jonas Andersson <jonas@microbit.se> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>