aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-10KVM: VMX: Consolidate userspace and kernel interrupt injection for VMXGleb Natapov
Use the same callback to inject irq/nmi events no matter what irqchip is in use. Only from VMX for now. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Make kvm_cpu_(has|get)_interrupt() work for userspace irqchip tooGleb Natapov
At the vector level, kernel and userspace irqchip are fairly similar. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: MMU: Fix auditing codeJan Kiszka
Fix build breakage of hpa lookup in audit_mappings_page. Moreover, make this function robust against shadow_notrap_nonpresent_pte entries. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: ia64 vcpu_reset() do not call kmalloc() with irqs disabledJes Sorensen
Restore local irq enabled state before calling kvm_arch_vcpu_init(), which calls kmalloc(GFP_KERNEL). Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: preserve int status through call to kvm_insert_vmm_mappingJes Sorensen
Preserve interrupt status around call to kvm_insert_vmm_mappin() in kvm_vcpu_pre_transition(). Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: restore irq state before calling kvm_vcpu_initJes Sorensen
Make sure to restore the psr after calling kvm_insert_vmm_mapping() which calls ia64_itr_entry() as it disables local interrupts and kvm_vcpu_init() may sleep. Avoids a warning from the lock debugging code. Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: remove empty function vti_vcpu_load()Jes Sorensen
vti_vcpu_load() doesn't do anything, so lets get rid of it. Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang<xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: Flush all TLBs once guest's memory mapping changes.Xiantao Zhang
Flush all vcpu's TLB entries once changes guest's memory mapping. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86: check for cr3 validity in ioctl_set_sregsMarcelo Tosatti
Matt T. Yourst notes that kvm_arch_vcpu_ioctl_set_sregs lacks validity checking for the new cr3 value: "Userspace callers of KVM_SET_SREGS can pass a bogus value of cr3 to the kernel. This will trigger a NULL pointer access in gfn_to_rmap() when userspace next tries to call KVM_RUN on the affected VCPU and kvm attempts to activate the new non-existent page table root. This happens since kvm only validates that cr3 points to a valid guest physical memory page when code *inside* the guest sets cr3. However, kvm currently trusts the userspace caller (e.g. QEMU) on the host machine to always supply a valid page table root, rather than properly validating it along with the rest of the reloaded guest state." http://sourceforge.net/tracker/?func=detail&atid=893831&aid=2687641&group_id=180599 Check for a valid cr3 address in kvm_arch_vcpu_ioctl_set_sregs, triple fault in case of failure. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: Don't hold slots_lock in guest modeJes Sorensen
Reorder locking to avoid holding the slots_lock when entering the guest. Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang<xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Replace kvmclock open-coded get_cpu_var() with the real thingAvi Kivity
Suggested by Ingo Molnar. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: SVM: Skip instruction on a task switch only when appropriateGleb Natapov
If a task switch was initiated because off a task gate in IDT and IDT was accessed because of an external even the instruction should not be skipped. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Add new mode of instruction emulation: skipGleb Natapov
In the new mode instruction is decoded, but not executed. The EIP is moved to point after the instruction. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Decode soft interrupt instructionsGleb Natapov
Do not emulate them yet. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Completely decode in/out at decoding stageGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Add unsigned byte immediate decodeGleb Natapov
Extend "Source operand type" opcode description field to 4 bites to accommodate new option. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Complete decoding of call near in decode stageGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Complete short/near jcc decoding in decode stageGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Complete ljmp decoding at decode stageGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Add lcall decodingGleb Natapov
No emulation yet. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: Add decoding of 16bit second immediate argumentGleb Natapov
Such as segment number in lcall/ljmp Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: MMU: remove global page optimization logicMarcelo Tosatti
Complexity to fix it not worthwhile the gains, as discussed in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Make kvm header C++ friendlynathan binkert
Two things needed fixing: 1) g++ does not allow a named structure type within an anonymous union and 2) Avoid name clash between two padding fields within the same struct by giving them different names as is done elsewhere in the header. Signed-off-by: Nathan Binkert <nate@binkert.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: PIT: fix count read and mode 0 handlingMarcelo Tosatti
Commit 46ee278652f4cbd51013471b64c7897ba9bcd1b1 causes Solaris 10 to hang on boot. Assuming that PIT counter reads should return 0 for an expired timer is wrong: when it is active, the counter never stops (see comment on __kpit_elapsed). Also arm a one shot timer for mode 0. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: make kvm depend on CONFIG_MODULES.Zhang, Xiantao
Since kvm-intel modue can't be built-in, make kvm depend on CONFIG_MODULES. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: x86 emulator: fix call near emulationGleb Natapov
The length of pushed on to the stack return address depends on operand size not address size. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: MMU: Discard reserved bits checking on PDE bit 7-8Sheng Yang
1. It's related to a Linux kernel bug which fixed by Ingo on 07a66d7c53a538e1a9759954a82bb6c07365eff9. The original code exists for quite a long time, and it would convert a PDE for large page into a normal PDE. But it fail to fit normal PDE well. With the code before Ingo's fix, the kernel would fall reserved bit checking with bit 8 - the remaining global bit of PTE. So the kernel would receive a double-fault. 2. After discussion, we decide to discard PDE bit 7-8 reserved checking for now. For this marked as reserved in SDM, but didn't checked by the processor in fact... Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Fix unneeded instruction skipping during task switching.Gleb Natapov
There is no need to skip instruction if the reason for a task switch is a task gate in IDT and access to it is caused by an external even. The problem is currently solved only for VMX since there is no reliable way to skip an instruction in SVM. We should emulate it instead. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Fix task switch back link handling.Gleb Natapov
Back link is written to a wrong TSS now. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Do not zero idt_vectoring_info in vmx_complete_interrupts().Gleb Natapov
We will need it later in task_switch(). Code in handle_exception() is dead. is_external_interrupt(vect_info) will always be false since idt_vectoring_info is zeroed in vmx_complete_interrupts(). Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Rewrite vmx_complete_interrupt()'s twisted maze of if() statementsGleb Natapov
...with a more straightforward switch(). Also fix a bug when NMI could be dropped on exit. Although this should never happen in practice, since NMIs can only be injected, never triggered internally by the guest like exceptions. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Fix handling of a fault during NMI unblocked due to IRETGleb Natapov
Bit 12 is undefined in any of the following cases: If the VM exit sets the valid bit in the IDT-vectoring information field. If the VM exit is due to a double fault. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Use rsvd_bits_mask in load_pdptrs()Dong, Eddie
Also remove bit 5-6 from rsvd_bits_mask per latest SDM. Signed-off-by: Eddie Dong <Eddie.Dong@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Fix feature testingSheng Yang
The testing of feature is too early now, before vmcs_config complete initialization. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Clean up Flex Priority relatedSheng Yang
And clean paranthes on returns. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: remove pointless conditional before kfree() in lapic initializationWei Yongjun
Remove pointless conditional before kfree(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: MMU: Use different shadows when EFER.NXE changesAvi Kivity
A pte that is shadowed when the guest EFER.NXE=1 is not valid when EFER.NXE=0; if bit 63 is set, the pte should cause a fault, and since the shadow EFER always has NX enabled, this won't happen. Fix by using a different shadow page table for different EFER.NXE bits. This allows vcpus to run correctly with different values of EFER.NXE, and for transitions on this bit to be handled correctly without requiring a full flush. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: MMU: Emulate #PF error code of reserved bits violationDong, Eddie
Detect, indicate, and propagate page faults where reserved bits are set. Take care to handle the different paging modes, each of which has different sets of reserved bits. [avi: fix pte reserved bits for efer.nxe=0] Signed-off-by: Eddie Dong <eddie.dong@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: ia64: enable external interrupt in vmmYang Zhang
Currently, the interrupt enable bit is cleared when in the vmm. This patch sets the bit and the external interrupts can be dealt with when in the vmm. This improves the I/O performance. Signed-off-by: Yang Zhang <yang.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: MMU: Fix comment in page_fault()Eddie Dong
The original one is for the code before refactoring. Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Correct wrong vmcs field sizesSheng Yang
EXIT_QUALIFICATION and GUEST_LINEAR_ADDRESS are natural width, not 64-bit. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Make flexpriority module parameter reflect hardware capabilityAvi Kivity
If the hardware does not support flexpriority, zero the module parameter. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Fix interrupt unhalting a vcpu when it shouldn'tGleb Natapov
kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking if interrupt window is actually opened. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Timer event should not unconditionally unhalt vcpu.Gleb Natapov
Currently timer events are processed before entering guest mode. Move it to main vcpu event loop since timer events should be processed even while vcpu is halted. Timer may cause interrupt/nmi to be injected and only then vcpu will be unhalted. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Fold vm_need_ept() into callersAvi Kivity
Trivial. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Zero ept module parameter if ept is not presentAvi Kivity
Allows reading back hardware capability. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Zero the vpid module parameter if vpid is not supportedAvi Kivity
This allows reading back how the hardware is configured. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Annotate module parameters as __read_mostlyAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Simplify module parameter namesAvi Kivity
Instead of 'enable_vpid=1', use a simple 'vpid=1'. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: VMX: Rename kvm_handle_exit() to vmx_handle_exit()Avi Kivity
It is a static vmx-specific function. Signed-off-by: Avi Kivity <avi@redhat.com>