aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-25usb: serial/pl2303: support for IO Data Device RSAQ5Masakazu Mokuno
This patch adds support for the IO Data Device USB-RSAQ5, PL2303 based USB-serial converter, to pl2303 driver Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix read vs. disconnect race in cytherm driverOliver Neukum
the disconnect method of this driver set intfdata to NULL before removing attribute files. The attributes' read methods will happily follow the NULL pointer. Here's the correct ordering. Signed-off-by : Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix locking in idmouseOliver Neukum
Pete caused me to lock at buggy drivers in this respect. The idmouse has a race between open and disconnect. This patch - solves the open/disconnect race - switches locking to mutexes Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix interface sysfs file-creation bugAlan Stern
This patch (as1005) fixes a rather subtle problem. When usb_set_configuration() registers the interfaces and their files in sysfs, it doesn't expect those files to exist already. But when an interface is registered, its driver may call usb_set_interface() and thereby cause the sysfs files to be created. The result is an error when usb_set_configuration() goes on to create those same files again. The (not-so-great) solution is to have usb_set_configuration() remove any existing files before creating them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix ssb_ohci_probe() build bugIngo Molnar
fix ssb_ohci_probe() build bug: drivers/built-in.o: In function `ssb_ohci_probe': ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable' ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base' ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size' ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable' [...] the reason was that this Kconfig combination was allowed: CONFIG_SSB=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_SSB=y the fix is to require a modular USB_OHCI_HCD build when SSB is modular. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: pl2303: remove can't happen checks, set speed properly and report baud rateAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: mos7840: Clean up old checks and stuffAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB rio500.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we have already oops'ed if "dev" was NULL in these places. Since "dev" being NULL isn't possible at these places this patch removes the NULL checks. Additionally, I've fixed the formatting of the if's. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB iowarrior.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we have already oops'ed if "dev" was NULL. Since "dev" being NULL doesn't seem to be possible here this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: add URB_FREE_BUFFER to permissible flagsOliver Neukum
URB_FREE_BUFFER needs to be allowed in the sanity checks to use drivers that use that flag. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: isd200: sort out USB/IDE dependancy messAlan Cox
The ISD200 driver imports a single trivial routine from the IDE layer and in doing so creates a mess of dependancies that drag in the entire old IDE layer. Even more sad - it does this for a routine which is usually (little endian) a null function! - Copy the function into ISD200 - Rename it so it doesn't clash with the ide header prototype - Remove all the depend constraints Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: FTDI Elan driver: Convert ftdi->u132_lock to mutexMatthias Kaehlcke
FTDI Elan driver: Convert the semaphore ftdi->u132_lock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix scheduling of Iso URBs in uhci-hcdAlan Stern
This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag the same as other host controller drivers, namely, to schedule an Iso URB for the first available time slot that hasn't already expired. URBs in which the flag isn't set will be scheduled for the first slot following the last URB, even if it has expired. This fixes a problem reported by Martin Bachem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: io_edgeport: cleanups, and tty speed reportingAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ftd_sio cleanups and updates for new termios work checkpatch fixesAndrew Morton
WARNING: line over 80 characters #23: FILE: drivers/usb/serial/ftdi_sio.c:297: + speed_t force_baud; /* if non-zero, force the baud rate to this value */ ERROR: use tabs not spaces #31: FILE: drivers/usb/serial/ftdi_sio.c:881: +^I$ ERROR: use tabs not spaces #39: FILE: drivers/usb/serial/ftdi_sio.c:890: +^I$ WARNING: line over 80 characters #111: FILE: drivers/usb/serial/ftdi_sio.c:1956: + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ftd_sio: cleanups and updates for new termios workAlan Cox
- Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: cp2101: convert to new termiosAlan Cox
- Convert to new baud rate functions - Add baud rate reporting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: whiteheat: clean up can't happen checks and encode baud rateAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25usb-serial: handle NULL termios methods as "no hardware changing support"Alan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: sierra: termiosAlan Cox
No hardware termios setting in this case so keep the old settings Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: option: termios handlingAlan Cox
For the devices that have no hardware settings set up the termios return properly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: kobil_sct: termios encoding fixupsAlan Cox
- Clear unsupported CMSPAR - Encode resulting speeds Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: keyspan termios tidyAlan Cox
- Clear unsupported CMSPAR bit - Clean up long chains of a->b-> a bit - Encode baud rate back into tty structure properly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ir_usb: termios handlingAlan Cox
- Clean up paranoia checks - Propogate back a correct fixed termios Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: empeg: clean up and handle speedsAlan Cox
The empeg is pretty fixed. Tidy up the long foo->bar->baz stuff and encode the fixed speed properly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: digi_acceleport: fix termios and also readability a bitAlan Cox
- Expand some x&y to x & y so I could read it when checking - Clear CMSPAR bit in the termios (as the driver does not support it) - Encode the speed using the new tty_encode_baud_rate facility Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ch341: fix termios handlingAlan Cox
The ch341 currently doesn't support most of the hardware setting. So to keep the termios data right we propogate the old termios hardware values back then encode the speed. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25usb serial: kill another case we pass NULL and shouldn'tAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ark3116: update termios handlingAlan Cox
- Set the i/ospeed in the initial termios properly - Use the tty_encode_baud_rate functions to report resulting rates properly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25serial: stop passing NULL to functions that expect dataAlan Cox
Earlier patches have removed the checking for old v new differences from the USB drivers so we can now pass in a valid blank old termios so that we don't to fill the drivers with magic hacks for console support Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: add new Novatel device ids to option driverGreg Kroah-Hartman
This adds support for the U727 and MC950 devices. Cc: Rony Sarkis <rsarkis@nvtl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-23Linux 2.6.24-rc1Linus Torvalds
The patch is big. Really big. You just won't believe how vastly hugely mindbogglingly big it is. I mean you may think it's a long way down the road to the chemist, but that's just peanuts to how big the patch from 2.6.23 is. But it's all good. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23add port definition for mcf UART driverGreg Ungerer
Add a port type definition for the Freescale UART driver ports (mcf.c). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: remove unused machdep variable definitionsGreg Ungerer
Remove old definitions of the timer function pointers. Add definitions of the common hardware timer functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: define DMA channels for ColdFire 532xGreg Ungerer
Create definition for DMA channels on the ColdFire 532x family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: add platform struct for ColdFire UART driverGreg Ungerer
Add platform support structure for use with new ColdFire UART driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: mark mem init functions as __initGreg Ungerer
Mark the m68knommu memory init functions as __init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: mark setup_arch() as __initGreg Ungerer
Mark the m68knommu setup_arch() function as __init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68VZ328 init codeGreg Ungerer
Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68EZ328 init codeGreg Ungerer
Clean up 68EZ328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68360 startup codeGreg Ungerer
Clean up 68360 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Use common function naming for 68328 timer functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68328 timer codeGreg Ungerer
Use common function naming for 68328 timer functions to make them consistent with the various other hardware m68knommu timers. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68328 init codeGreg Ungerer
Clean up 68328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: remove unused variables in setup.cGreg Ungerer
Remove unused variables from setup.c code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23Merge branch 'irq-upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate drivers/char/riscom8: clean up irq handling isdn/sc: irq handler clean isdn/act2000: fix major bug. clean irq handler. char/pcmcia/synclink_cs: trim trailing whitespace drivers/char/ip2: separate polling and irq-driven work entry points drivers/char/ip2: split out irq core logic into separate function [NETDRVR] lib82596, netxen: delete pointless tests from irq handler Eliminate pointless casts from void* in a few driver irq handlers. [PARPORT] Remove unused 'irq' argument from parport irq functions [PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt} [PARPORT] Consolidate code copies into a single generic irq handler
2007-10-23Merge branch 'warnings' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'warnings' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ni5010: kill unused variable eexpress: fix !SMP unused-var warning cgroup: kill unused variable
2007-10-23Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits) Remove Andrew Morton from list of net driver maintainers. bonding: Acquire correct locks in alb for promisc change bonding: Convert more locks to _bh, acquire rtnl, for new locking bonding: Convert locks to _bh, rework alb locking for new locking bonding: Convert miimon to new locking bonding: Convert balance-rr transmit to new locking Convert bonding timers to workqueues Update MAINTAINERS to reflect my (jgarzik's) current efforts. pasemi_mac: fix typo defxx.c: dfx_bus_init() is __devexit not __devinit s390 MAINTAINERS remove header_ops bug in qeth driver sky2: crash on remove MIPSnet: Delete all the useless debugging printks. AR7 ethernet: small post-merge cleanups and fixes mv643xx_eth: Hook up mv643xx_get_sset_count mv643xx_eth: Remove obsolete checksum offload comment mv643xx_eth: Merge drivers/net/mv643xx_eth.h into mv643xx_eth.c mv643xx_eth: Remove unused register defines mv643xx_eth: Clean up mv643xx_eth.h ...
2007-10-23Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: jmicron: update quirk for JMB361/3/5/6 libata: add HTS542525K9SA00 to NCQ blacklist libata-core: auditting chk_status v check_status [libata] checkpatch-inspired cleanups
2007-10-23ni5010: kill unused variableJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-23eexpress: fix !SMP unused-var warningJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-13 02:22:56 +0000