aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-24cfg80211: treat ieee80211_regdom hints as user hintsLuis R. Rodriguez
We were treating ieee80211_regdom module parameter hints as core hints, this means we were not letting the user help compliance further when using the module parameter. It also meant that users with a device with a custom regulatory domain set (wiphy->custom_regulatory) using this module parameter were being stuck to the original default core static regualtory domain. We fix this by using the static cfg80211_regdomain alpha2 as the core hint and treating the module parameter separately. All iwlwifi and ath5k/ath9k/ar9170 devices which world roam set the wiphy->custom_regulatory. This change allows users using this module parameter to have it trated as a a proper user hint and not have it ignored. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: disable radio when all devices are marked idleLuis R. Rodriguez
This uses the new configuration changes indicated up by mac80211 when all interfaces are marked idle. We need to do a little more work as we have our own set of virtual wiphys within ath9k. Only when all virtual wiphys are inactive do we allow an idle state change for a wiphy to trigger disabling the radio. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: serialize ath9k_ps_{wakeup,restore} callsGabor Juhos
These functions are changing the power mode of the chip, but this may have unpredictable effects, if another code are trying to set the power mode via 'ath9k_hw_setpower' in the same time from another context. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: uninline ath9k_ps_{wakeup,restore} functionsGabor Juhos
Uninline these functions before we add functional changes to them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: serialize ath9k_hw_setpower callsGabor Juhos
Because ath9k_setpower is called from various contexts, we have to protect it against concurrent calls. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove pointless ath9k_ps_restore() in ath_detach()Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Handle tx desc shortage more appropriatelyVasanthakumar Thiagarajan
Update tx BA window and complete the frame as failed one if we can't clone the holding descriptor due to unavailability of descriptors. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove bogus assert in ath_clone_txbuf()Vasanthakumar Thiagarajan
oops, this one should be part of the original patch "ath9k: downgrade assert in ath_clone_txbuf()" Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Fix TX hang issue with Atheros chipsetsSenthil Balasubramanian
The hardware doesn't generate interrupts in some cases and so work around this by monitoring the TX status periodically and reset the chip if required. This behavior of the hardware not generating the TX interrupts can be noticed through ath9k debugfs interrupt statistics when heavy traffic is being sent from STA to AP. One can easily see this behavior when the STA is transmitting at a higher rates. The interrupt statistics in the debugfs interface clearly shows that only RX interrupts alone being generated and TX being stuck. TX should be monitored through a timer and reset the chip only when frames are queued to the hardware but TX interrupts are not generated for the same even after one second. Also, we shouldn't remove holding descriptor from AC queue if it happens to be the only descriptor and schedule TX aggregation regarless of queue depth as it improves scheduling of AMPDUs from software to hardware queue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: RX stucks during heavy traffic in HT40 mode.Senthil Balasubramanian
Running iperf along with p2p traffic on both TX and RX side then stop one side, then stop the other side, then start it up again, eventually the STA gets into a mode that it can not pass data at all. A hardware workaround for invalid RSSI can make FIFO write pointer to jump over read pointer, causing RX data corruption and repeated DMA. Both TX and RX works fine when the workaround is disabled. To replace the original hardware work around, software looks for frames with post delimiter CRC error and mark the RSSI invalid so that the upperlayer will not use the RSSI associated with this frame. So disable the hardware workaround by updating the appropriate registers. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Manipulate and report the correct RSSISenthil Balasubramanian
RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Nuke struct ath_tx_ratectrl_stateVasanthakumar Thiagarajan
Move its only member (u8 per) to struct ath_rate_priv. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Use probe interval instead of rssi reduce intervalVasanthakumar Thiagarajan
Get rid of rssi reduce interval. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove unused members from rate control structureVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove dead code in rate controlVasanthakumar Thiagarajan
ath9k rate control is based on only PER (packet error rate), remove unused code which was intented to do rssi based rate selection. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove rate control wraperLuis R. Rodriguez
After the cleanup we just use get_rate as a wrapper, skip the wrapper. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: add helper for management / no-ack frame rate decisionLuis R. Rodriguez
All current rate control algorithms agree to send management and no-ack frames at the lowest rate. They also agree to do this when sta and the private rate control data is NULL. We add a hlper to mac80211 for this and simplify the rate control algorithm code. Developers wishing to make enhancements to rate control algorithms are for broadcast/multicast can opt to not use this in their gate_rate() mac80211 callback. Cc: Zhu Yi <yi.zhu@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Cc: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: use ieee80211_is_data(fc)Luis R. Rodriguez
iwl-agn-rs.c already uses this. Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: make minstrel/pid RC use ieee80211_is_data(fc)Luis R. Rodriguez
Cc: Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove unnecessary IEEE80211_TX_CTL_NO_ACK checksLuis R. Rodriguez
We check for this condition early on in our mac80211 get_rate() callback ath_get_rate(), so remove this check later down the path. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: rename ath_rc_ratefind_ht() to ath_rc_get_highest_rix()Luis R. Rodriguez
The purpose is to find the highest rate we can use. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remap ATH9K_MODE_*Luis R. Rodriguez
There are a lot of gaps here. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove ATH9K_MODE_11BLuis R. Rodriguez
This saves us 2733 bytes. text data bss dec hex filename 252265 3628 1584 257477 3edc5 ath9k-has-b-rate.ko 249905 3628 1584 255117 3e48d ath9k.ko Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Siged-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove unused ath_rc_isvalid_txmask()Luis R. Rodriguez
Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: rename ath_rc_get_nextlowervalid_txrate()Luis R. Rodriguez
What this does is get us our next lower rate so call it that, ath_rc_get_lower_rix(). Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove pointless wrapper ath_rc_rate_getidx()Luis R. Rodriguez
This is just calling another helper, so just use the other helper directly. This should make it clear that when do not find the next rate we stick to the current one. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove unused stepdown when looking for the next rateLuis R. Rodriguez
This is not used, remove this. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove unused min rate calculation codeLuis R. Rodriguez
This is not used, and when we need to get the lowest rate we should simply use mac80211's own rate_lowest_index(sband, sta). Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: cleanup try count for MRR in rate controlLuis R. Rodriguez
This has no functional change and just cleans up the code to be more legible and removes a useless variable for Multi Rate Retry. For regular frames we use 2 retries for MRR segments [0-2]. For the last MRR segment [3] we use 4. MRR[0] = 2 MRR[1] = 2 MRR[2] = 2 MRR[3] = 4 Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: remove rs_get_rate workaroundLuis R. Rodriguez
This removes the work around implemented for transmitting on an unsupported band on iwlwifi. This was added via the patch: 8e1856e82cb8f541e925738bebfbc473420cda68: iwlwifi: fix rs_get_rate WARN_ON() Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: downgrade assert in rc.c for invalid rateLuis R. Rodriguez
The case where no vaid rate is found should not happen now but to help debugging and downgrade this to a warn. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: drop frames for sta with no valid rateLuis R. Rodriguez
When we're associated we should be able to send data to target sta. If we cannot we may be trying to use the incorrect band to talk to the sta. Lets catch any such cases, warn, and drop the frames to not invalidate assumptions being made on rate control algorithms when they have a valid sta to communicate with. Any such cases should be handled and fixed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wireless: wl12xx, fix lock imbalanceJiri Slaby
Add omitted mutex_unlock to one of wl12xx_op_start fail paths (when wl12xx_chip_wakeup fails). [v2] Power off the device, because: \= cite from http://marc.info/?l=linux-kernel&m=124755028209880&w=2 If the chip cannot be booted, why should it remain powered on? In some rare cases, the chip might fail to initialize, but can recover if powered off and on again, so turning it off at this point is the right thing to do. =/ Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make some logging functions static/unexportJohannes Berg
iwl_dump_nic_error_log can be static and iwl_dump_nic_event_log doesn't need to be exported. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24rtl8187: updating Kconfig with info of branded devicesHin-Tak Leung
Adding more detailed info about Asus motherboards and Ralink devices. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24zd1211rw: adding Accton Technology Corp (083a:e501) as a ZD1211B deviceHin-Tak Leung
New device supported by the zd1211rw driver reported to linux-wireless. Device string from lsusb: "ID 083a:e501 Accton Technology Corp. ZD1211B" RF type from dmesg: zd1211b chip 083a:e501 v4810 high 00-1a-2a AL2230_RF pa0 g--NS Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Adrián Cereto<ssorgatem@esdebian.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix unregistrationJohannes Berg
The work that we cancel there requires the cfg80211_mutex, so we can't cancel it under the mutex, which is fine, we can just move it to after the locked section. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: cancel the connection monitor timers/workJohannes Berg
In "mac80211: monitor the connection" I forgot to add code to cancel the new timers & work when the interface is brought down, which isn't a problem if you just bring it down, but _is_ a problem when you destroy the interface. Correct this lapse. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24drivers/net: Drop unnecessary NULL testJulia Lawall
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix disabling WPA via wext (SIOCSIWAUTH)Gábor Stefanik
cfg80211_set_wpa_version completely missed the use case when disabling WPA, considering IW_AUTH_WPA_VERSION_DISABLED an invalid argument. This caused weird error messages in wpa_supplicant. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24rt2x00: Remove DEVICE_STATE_DISABLED_RADIO_HWIvo van Doorn
The DEVICE_STATE_DISABLED_RADIO_HW flag is only read but never set, it is an ancient part of one of the many versions of the rfkill implementations in rt2x00. It is about time is disappears. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ar9170: implement transmit aggregationChristian Lamparter
This patch roughly implements xmit aggregation for ar9170-like device. Not all AP are compatible with the driver(and firmware) yet, so YMMV. A more refined code will definitely need the final HT specification to be available for the public, lots of firmware modification and possibly a redesigned driver just for good measure. Sadly, these conditions won't come true anytime soon... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: generate channel list dynamicallyChristian Lamparter
This patch enhances the eeprom parser to generate customized channel list for every device. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix more bugs in mlme handlingJohannes Berg
The "what-was-I-thinking-if-anything" patch. Clearly, if cfg80211_send_disassoc() does wdev_lock() and then calls __cfg80211_send_disassoc(), the latter shouldn't lock again. And the sme_state test is ... no further comments. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24rt2x00: Implement set_tim callback for all driversStefan Steuerwald
Implement set_tim callback for all rt2x00 drivers, this makes the device wake up powersaving stations properly while in AP mode. The only way to update the beacon is by simply calling mac80211 and requesting the new beacon. This means the set_tim() event is mostly the same as a beacon_done() event which was already defined in rt2x00lib. Signed-off-by: Stefan Steuerwald <salsasepp@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24nl80211: report BSS statusJohannes Berg
When connected to a BSS, or joined to an IBSS, we'll want to know in userspace without using wireless extensions, so report the BSS status in the BSS list. Userspace can query the BSS list, display all the information and retrieve the station information as well. For example (from hwsim): $ iw dev wlan1 scan dump BSS 02:00:00:00:00:00 (on wlan1) -- associated freq: 2462 beacon interval: 100 capability: ESS ShortSlotTime (0x0401) signal: -50.00 dBm SSID: j Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 DS Paramater set: channel 11 ERP: <no flags> Extended supported rates: 24.0 36.0 48.0 54.0 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix wext setting SSIDJohannes Berg
Pavel reported that you can't set the SSID from "foo" to "bar". I tried reproducing, but used different values, with different lengths, and thus never saw the obvious problem. Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: don't look at wdev->ssid for giwessidJohannes Berg
This variable is only used internally, _while_ connected. If we use it, the sequence # iwconfig wlan1 essid foo <connects> # iwconfig wlan1 essid "" <disconnects> # iwconfig will still display "foo" as the SSID afterwards, which is obviously quite bogus. Fix this by only displaying the wext SSID, if present. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211_hwsim: report fixed signal strengthJohannes Berg
There's no reason to think that hwsim has any actual signal strength, but for testing it is very useful to have it report _some_ value to the stack so I can see if the value ends up being reported correctly Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix wext statsJohannes Berg
Instead of using the wext BSSID which may be NULL if you haven't explicitly set one, we should instead use the current_bss pointer -- if that's NULL we aren't connected anyway. Fixes missing signal quality output reported to me internally at Intel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 15:34:24 +0000