aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7364): reduce stack usage of v4l_compat_translate_ioctlMarcin Slusarz
v4l_compat_translate_ioctl used 1376 bytes of stack (x86_64), so split this 800 lines long function into ~20 small noinline functions; the biggest function takes now 712 bytes (v4l1_compat_sync) fix VIDIOCSWIN handler which printked wrong errors Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7363): fix coding style violations in v4l1-compat.cMarcin Slusarz
fix most coding style violations found by checkpatch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7360): tuner-simple: fix return value of simple_dvb_configureMichael Krufky
simple_dvb_configure returns the actual tuned frequency to its caller, so it must be declared as a u32 rather than an int. As a result, we will return 0 to indicate a failure. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7359): tuner-simple: enable digital tuning support for Thomson FE6600Michael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7358): tuner-simple: enable digital tuning support for Philips TD1316Michael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7357): tuner-simple: enable digital tuning support for Microtune ↵Michael Krufky
4042 FI5 Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7356): tuner-simple: enable digital tuning support for Thomson DTT 7610Michael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7355): tuner-simple: use separate inputs for vsb and qam on ↵Michael Krufky
tuv1236d & fcv1236d Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7354): tuner-simple: enable digital tuning support for Philips FCV1236DMichael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7353): tuner-simple: enable digital tuning support for Philips TUV1236DMichael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7352): tuner-simple: enable digital tuning support for Philips ↵Michael Krufky
FMD1216ME Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7351): tuner-simple: add init and sleep methodsMichael Krufky
taken from dvb-pll Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7350): tuner-simple: enable digital tuning support for Thomson DTT 761XMichael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7349): tuner-simple: enable digital tuning support for LG TDVS-H06xFMichael Krufky
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7348): tuner-simple: do not send i2c commands if there is no i2c ↵Michael Krufky
adapter if (priv->i2c_props.adap == NULL) then exit any function that would send commands over the i2c bus. We allow drivers to attach without an i2c adapter for cases where the dvb demod accesses the tuner directly via calc_regs. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7347): tuner-simple: add basic support for digital tuning of hybrid ↵Michael Krufky
devices Add entry points used for digital tuning via the dvb_frontend. Share state data between multiple instances of the driver for hybrid tuners. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7346): tda9887: allow multiple driver instances for the same ↵Michael Krufky
hardware to share state Convert tda9887 to use the new hybrid_tuner_request_state and hybrid_tuner_release_state macros to manage state sharing between hybrid tuner instances. Some ATSC/DVB cards need to put the analog demodulator into standby before tuning digital. This patch allows us to attach the tda9887 driver to the digital side of the bridge driver and be able to put it into standby without jeopardizing the analog demod driver's state. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7344): cx25840: better PAL-M and NTSC-KR handlingHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7343): msp3400: fix SECAM D/K handlingHans Verkuil
The 6.5 MHz carrier was interpreted as SECAM-L even if SECAM-D/K was selected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7342): saa7115: fix PAL-Nc handlingHans Verkuil
Fsc 3.58 refers to Combination PAL-N (aka PAL-Nc), not to plain PAL-N (that uses Fsc 4.43). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7341): ivtv: rename tunerhz to tunertypeHans Verkuil
There are two tuner types: those for M/N standards and those for all others. However, M/N standards are not always 60 Hz (PAL-N/Nc are 50 Hz), so rename the module option accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7340): ivtv: fix tunerhz bug: PAL-N(c) is 50 Hz, not 60Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7339): ivtv: add support for Japanese variant of the Adaptec AVC-2410Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7338): ivtv: improve pal/secam module options, add tunerhz module ↵Hans Verkuil
option Allow options like pal=bgh, improve description of those options. Add tunerhz option: 50=card has 50Hz tuner, 60=card has 60Hz tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7337): ivtv: fix polling bugHans Verkuil
The q_io queue was never taken into account by the poll function. Thanks to Andy Walls for finding this bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7336): soc-camera: streamline hardware parameter negotiationGuennadi Liakhovetski
Improve hardware parameter negotiation between the camera host driver and camera drivers. Parameters like horizontal and vertical synchronisation, pixel clock polarity shall be set depending on capabilities of the parties. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7335): usb-video: checkpatch fixesAndrew Morton
Please run checkpatch prior to sending patches Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7332): ir-kbd-i2c: Minor optimization in ir_probeJean Delvare
This saves an initialization and a comparison. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7331): Fix em2800 altsetting selectionSascha Sommer
Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7329): add flag to allow software demux to recognize the output typeAndreas Oberritter
Previously, the macro DVR_FEED, which is used to recognize and filter out duplicate packets going to the DVR device, used the TS_PAYLOAD_ONLY flag to identify a packet's destination. This kind of filtering was introduced by the following two changesets: Now, that it is possible to record TS PIDs using the demux device by setting the output type to DMX_OUT_TSDEMUX_TAP, checking TS_PAYLOAD_ONLY is not sufficient anymore. Therefore another flag, TS_DEMUX, is added to specify the output type of a feed. This allows multiple clients to filter the same TS PID on a demux device simultaneously. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7327): cx88: Fix memset for tuner-xc3028 controlMauro Carvalho Chehab
Fix a cut-and-paste error Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7326): Fix bad whitespacesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7325): cx88-dvb: fix an OOPS for xc3028 devices, when dvb_attach failsMauro Carvalho Chehab
If dvb_attach fails, dev->dvb.frontend is NULL. This will produce an OOPS, as reported. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7323): pvrusb2: set default video standard to NTSC for OnAir HDTV / ↵Michael Krufky
Creator The pvrusb2 driver normally picks up the default video standard from the eeprom on Hauppauge devices, but the OnAir HDTV and OnAir Creator are not Hauppauge devices, and do not store this information in any eeprom. These devices support NTSC/ATSC, so we should use NTSC by default when in analog mode. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7322): pvrusb2: Fix storage-class as per C99 specTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7321): pvrusb2: Rework context handling and initializationMike Isely
This change significantly rearranges pvr2_context level initialization and operation: 1. A new kernel thread is set up for management of the context. 2. Destruction of the pvr2_context instance is moved into the kernel thread. No other context is able to remove the instance; doing this simplifies lock handling. 3. The callback into pvrusb2-main, which is used to trigger initialization of each interface, is now issued from this kernel thread. Previously it had been indirectly issued out of the work queue thread in pvr2_hdw, which led to deadlock issues if the interface needed to change a control setting (which in turn requires dispatch of another work queue entry). 4. Callbacks into the interfaces (via the pvr2_channel structure) are now issued strictly from this thread. The net result of this is that such callback functions can now also safely operate driver controls without deadlocking the work queue. (At the moment this is not actually a problem, but I'm anticipating issues with this in the future). 5. There is no longer any need for anyone to enter / exit the pvr2_context structure. Implementation of the kernel thread here allows this all to be internal now, simplifying other logic. 6. A very very longstanding issue involving a mutex deadlock between the pvrusb2 driver and v4l should now be solved. The deadlock involved the pvr2_context mutex and a globals-protecting mutex in v4l. During initialization the driver would take the pvr2_context mutex first then the v4l2 interface would register with v4l and implicitly take the v4l mutex. Later when v4l would call back into the driver, the two mutexes could possibly be taken in the opposite order, a situation that can lead to deadlock. In practice this really wasn't an issue unless a v4l app tried to start VERY early after the driver appeared. However it still needed to be solved, and with the use of the kernel thread relieving need for pvr2_context mutex, the problem should be finally solved. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7320): pvrusb2: Eliminate timer race during tear-downMike Isely
The pvrusb2 tear-down logic was clearing two timers before stopping its internal work queue. That left a tiny window open where the work queue might run after the timers are stopped, possibly starting them again. This could lead to dangling pointers and an oops. Solution: Kill the work queue first, then delete the timers. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7319): pvrusb2: Close potential race condition during initializationMike Isely
There is a callback that is issued to into pvr2_context from pvr2_hdw after initialization is done. There was a probability that this callback could get missed. Fixed. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7318): pvrusb2: Remove dead codeMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7317): pvrusb2: Increase buffer size for printing video standard ↵Mike Isely
strings Buffer size for printing pvrusb2 video standard strings was too small before. This is cosmetic; the printing logic is not able to overrun a too-short buffer. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7316): pvrusb2: Handle ATSC video standard bitsMike Isely
The pvrusb2 driver dynamically generates an enumeration of support video standard combinations based on which video standard bits are set. ATSC modes don't fall into this since they are by nature not analog. The pvrusb2 driver has been warning about an inability to classify ATSC standards. This change causes the classification algorithm to ignore any ATSC standards (such things are better handled elsewhere anyway). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7315): pvrusb2: Add Gotview USB 2.0 DVD Deluxe to supported devicesMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7314): pvrusb2: Make device attribute structure more compactMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7313): pvrusb2: Make LED control into a device-specific attributeMike Isely
The pvrusb2 driver has used hardcoded logic to control the LED on the device. However this is really Hauppauge-specific behavior. This change defines a new device attribute for LED control and sets things up appropriately for Hauppauge devices. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7312): pvrusb2: Indicate streaming status via LEDMike Isely
Most of this originates from Michael Krufky <mkrufky@linuxtv.org>; these changes move LED control into separate functions. This is the first step in new work to make LED control a device-specific attribute. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7311): pvrusb2: Allow digital streaming without encoder firmwareMike Isely
The encoder is not a part of the pipeline when in digital mode, so streaming is OK in this case even when the encoder's firmware is not loaded. Modify the driver core handling of this scenario to permit streaming. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7310): pvrusb2: trace print cosmetic cleanup / improvementsMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7309): pvrusb2: Enhance core logic to also control digital streamingMike Isely
This is a major pvrusb2 change. The driver core has an algorithm that is used to cleanly sequence the changes needed to enable / disable video streaming. The algorithm had originally been written for analog streaming, but when in digital mode the pipeline is considerably Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7308): pvrusb2: Define digital control scheme device attributesMike Isely
Unlike analog control, control of the digital side is not nearly as uniform among different devices. So we have to specify the correct digital control scheme as a new device attribute. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7307): pvrusb2: New functions for additional FX2 digital-related ↵Mike Isely
commands This code is actually part of a larger set from Mike Krufky <mkrufky@linuxtv.org>, to support ATSC streaming from within the pvrusb2 driver. More to come... Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 17:16:40 +0000