aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-02-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-02-28[PATCH] cfq-iosched: slice expiry fixupsJens Axboe
During testing of SLES10, we encountered a hang in the CFQ io scheduler. Turns out the deferred slice expiry logic is buggy, so remove that for now. We could be left with an idle queue that would never wake up. So kill that logic, always expire immediately. Also fix a potential timer race condition. Patch looks bigger than it is, because it moves a function. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] powerpc/iseries: Fix double phys_to_abs bug in htab_bolt_mappingMichael Ellerman
Before the merge I updated create_pte_mapping() to work for iSeries, by calling iSeries_hpte_bolt_or_insert. (4c55130b2aa93370f1bf52d2304394e91cf8ee39) Later we changed iSeries_hpte_insert to cope with the bolting case, and called that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping) (3c726f8dee6f55e96475574e9f645327e461884c). Unfortunately that change introduced a subtle bug, where we pass an absolute address to iSeries_hpte_insert() where it expects a physical address. This leads to us calling phys_to_abs() twice on the physical address, which is seriously bogus. This only causes a problem if the absolute address from the first translation can be looked up again in the chunk_map, which depends on the size and layout of memory. I've seen it fail on one box, but not others. The minimal fix is to pass the physical address to iSeries_hpte_insert(). For 2.6.17 we should make phys_to_abs() BUG if we try to double-translate an address. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] powerpc: fix NULL pointer in handle_eeh_eventsOlaf Hering
This patch fixes a crash in handle_eeh_events, but ethtool -t still doesnt work right. ... pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0] pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c sp: c00000005192be60 msr: 9000000000009032 dar: 268 dsisr: 40000000 current = 0xc0000001fe7bf1a0 paca = 0xc00000000048b280 pid = 16322, comm = eehd enter ? for help [c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130 [c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68 ... (none):/# /usr/sbin/ethtool -i eth0 driver: e100 version: 3.5.10-k2-NAPI firmware-version: N/A bus-info: 0000:21:01.0 (none):/# /usr/sbin/ethtool -t eth0 Call Trace: [C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138 [C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4 [C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260 [C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220 [C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c [C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8 [C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740 [C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404 [C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108 [C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510 [C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94 [C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150 [C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc [C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40 EEH: Detected PCI bus error on device 0000:21:01.0 EEH: This PCI device has failed 1 times since last reboot: <NULL> - modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory Cannot get strings: No such device (none):/# (none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 (none):/# Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> EEH: This PCI device has failed 1 times since last reboot: <NULL> - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> EEH: This PCI device has failed 1 times since last reboot: <NULL> - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> and so on Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] powerpc: vdso 64bits gettimeofday bugBenjamin Herrenschmidt
A bug in the assembly code of the vdso can cause gettimeofday() to hang or to return incorrect results. The wrong register was used to test for pending updates of the calibration variables and to create a dependency for subsequent loads. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] powerpc: fix dynamic PCI probe regressionJohn Rose
Some hotplug driver functions were migrated to the kernel for use by EEH in commit 2bf6a8fa21570f37fd1789610da30f70a05ac5e3. Previously, the PCI Hotplug module had been changed to use the new OFDT-based PCI probe when appropriate: 5fa80fcdca9d20d30c9ecec30d4dbff4ed93a5c6 When rpaphp_pci_config_slot() was moved from the rpaphp driver to the new kernel function pcibios_add_pci_devices(), the OFDT-based probe stuff was dropped. This patch restores it. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-27Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-02-27Revert "[PATCH] x86_64: Only do the clustered systems have unsynchronized ↵Linus Torvalds
TSC assumption on IBM systems" This reverts commit 13a229abc25640813f1480c0478dfc6bdbc1c19e. Quoth Andi: "After some consideration and feedback from various people it turns out this wasn't that good an idea. It has some problems and needs more work. Since it was only an optimization anyways it's best to just back it out again for now." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-27[libata] Disable FUAJeff Garzik
Until problems are sorted.
2006-02-27Merge git://oss.sgi.com:8090/oss/git/xfs-rc-fixesLinus Torvalds
2006-02-28[XFS] Don't map non-uptodate buffers in xfs_probe_cluster; also fixesEric Sandeen
obscure corruption case SGI-PV: 942658 SGI-Modid: xfs-linux-melb:xfs-kern:207119a Signed-off-by: Eric Sandeen <sandeen@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-02-28[XFS] Reduce stack use during quota mounts (caused a panic). ThisNathan Scott
regressed recently via the fix for inherited quota inode attributes. SGI-PV: 947312 SGI-Modid: xfs-linux-melb:xfs-kern:25318a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-02-28[XFS] Fix a realtime allocator regression introduced by an old iget raceNathan Scott
fix. Noticed by Roger Willcocks. SGI-PV: 949821 SGI-Modid: xfs-linux-melb:xfs-kern:25257a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-02-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2006-02-27[REQSK]: Don't reset rskq_defer_accept in reqsk_queue_allocArnaldo Carvalho de Melo
In 295f7324ff8d9ea58b4d3ec93b1aaa1d80e048a9 I moved defer_accept from tcp_sock to request_queue and mistakingly reset it at reqsl_queue_alloc, causing calls to setsockopt(TCP_DEFER_ACCEPT ) to be lost after bind, the fix is to remove the zeroing of rskq_defer_accept from reqsl_queue_alloc. Thanks to Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> for reporting and testing the suggested fix. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[NETFILTER]: Restore {ipt,ip6t,ebt}_LOG compatibilityPatrick McHardy
The nfnetlink_log infrastructure changes broke compatiblity of the LOG targets. They currently use whatever log backend was registered first, which means that if ipt_ULOG was loaded first, no messages will be printed to the ring buffer anymore. Restore compatiblity by using the old log functions by default and only use the nf_log backend if the user explicitly said so. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[NETFILTER]: nf_queue: fix end-of-list checkPatrick McHardy
The comparison wants to find out if the last list iteration reached the end of the list. It needs to compare the iterator with the list head to do this, not the element it is looking for. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[NETFILTER]: nf_queue: remove unnecessary check for outfnPatrick McHardy
The only point of registering a queue handler is to provide an outfn, so there is no need to check for it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[NETFILTER]: nf_queue: fix rerouting after packet manglingPatrick McHardy
Packets should be rerouted when they come back from userspace, not before. Also move the queue_rerouters to RCU to avoid taking the queue_handler_lock for each reinjected packet. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[NETFILTER]: nf_queue: check if rerouter is present before using itPatrick McHardy
Every rerouter needs to provide a save and a reroute function, we don't need to check for them. But we do need to check if a rerouter is registered at all for the current family, with bridging for example packets of unregistered families can hit nf_queue. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[NETFILTER]: nf_queue: don't copy registered rerouter dataPatrick McHardy
Use the registered data structure instead of copying it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[IPSEC]: Kill post_input hook and do NAT-T in esp_input directlyHerbert Xu
The only reason post_input exists at all is that it gives us the potential to adjust the checksums incrementally in future which we ought to do. However, after thinking about it for a bit we can adjust the checksums without using this post_input stuff at all. The crucial point is that only the inner-most NAT-T SA needs to be considered when adjusting checksums. What's more, the checksum adjustment comes down to a single u32 due to the linearity of IP checksums. We just happen to have a spare u32 lying around in our skb structure :) When ip_summed is set to CHECKSUM_NONE on input, the value of skb->csum is currently unused. All we have to do is to make that the checksum adjustment and voila, there goes all the post_input and decap structures! I've left in the decap data structures for now since it's intricately woven into the sec_path stuff. We can kill them later too. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[IPSEC] esp: Kill unnecessary block and indentationHerbert Xu
We used to keep sg on the stack which is why the extra block was useful. We've long since stopped doing that so let's kill the block and save some indentation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27[TG3]: Fix Sun tg3 variant detection.David S. Miller
Some Sun parts don't have PCI_VENDOR_ID_SUN in the subsystem vendor ID. So add another fallback test, which is the name of the OBP firmware device tree node. If it's a Sun part we'll get "network", else it will be named "ethernet". Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
2006-02-27[MIPS] Use generic compat routines for readdir, getdentsAtsushi Nemoto
Not just cleanup but also fixes O32 readdir(2) emulation. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-27[MIPS] Fix atomic*_sub_if_positive return value.Ralf Baechle
Reported and initial fix by Thomas Koeller <thomas.koeller@baslerweb.com>, rewritten by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-27[MIPS] SMP: Fix initialization order bug.Ralf Baechle
A recent change requires cpu_possible_map to be initialized before smp_sched_init() but most MIPS platforms were initializing their processors in the prom_prepare_cpus callback of smp_prepare_cpus. The simple fix of calling prom_prepare_cpus from one of the earlier SMP initialization hooks doesn't work well either since IPIs may require init_IRQ() to have completed, so bit the bullet and split prom_prepare_cpus into two initialization functions, plat_smp_setup which is called early from setup_arch and plat_prepare_cpus called where prom_prepare_cpus used to be called. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-27[MIPS] Use "=R" constraint to avoid compiler errors in cmpxchg().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-27[PATCH] Fix Specialix SX corruptionMarc Zyngier
With the latest kernels, I experienced some strange corruption, some '*****' being randomly inserted in the character flow, like this: ashes:~# ashes:~# a*******shes:~# ashes:~# ashes:~# Further investigation shows that the problem was introduced during Alan's "TTY layer buffering revamp" patch, the amount of data to be copied being reduced after buffer allocation. Moving the count fixup around solves the problem. Signed-off-by: Marc Zyngier <maz@misterjones.org> Approved-by: Rogier Wolff <R.E.Wolff@BitWizard.nl> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-27Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-02-27Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-02-26Linux v2.6.16-rc5Linus Torvalds
2006-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2006-02-26Make Kprobes depend on modulesLinus Torvalds
Commit 9ec4b1f356b3bad928ae8e2aa9caebfa737d52df made kprobes not compile without module support, so just make that clear in the Kconfig file. Also, since it's marked EXPERIMENTAL, make that dependency explicit too. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[SPARC64]: Make cpu_present_map available earlier.David S. Miller
The change to kernel/sched.c's init code to use for_each_cpu() requires that the cpu_possible_map be setup much earlier. Set it up via setup_arch(), constrained to NR_CPUS, and later constrain it to max_cpus in smp_prepare_cpus(). This fixes SMP booting on sparc64. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-26[SPARC64]: Implement futex_atomic_op_inuser().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-26[PATCH] fix voyager after topology.c moveJames Bottomley
Commit 9c869edac591977314323a4eaad5f7633fca684f broke voyager again rather subtly because it already had its own topology exporting functions, so now each CPU gets registered twice. I think we can actually use the generic ones, so I don't propose reverting it. The attached should eliminate the voyager topology functions in favour of the generic ones. I also added a define to ensure voyager is never hotplug CPU (we don't have the support in the SMP harness). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] fix build on x86_64 with !CONFIG_HOTPLUG_CPUBrian Magnuson
The commit e2c0388866dc12bef56b178b958f9b778fe6c687 added setup_additional_cpus to setup.c but this is only defined if CONFIG_HOTPLUG_CPU is set. This patch changes the #ifdef to reflect that. Signed-off-by: Brian Magnuson <magnuson@rcn.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Fix ioctl compat code for /dev/rtcAndi Kleen
RTC_IRQP_SET/RTC_EPOCH_SET don't take a pointer to an argument, but the argument itself. This actually simplifies the code and makes it work. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Better ATI timer fixAndi Kleen
The previous experiment for using apicmaintimer on ATI systems didn't work out very well. In particular laptops with C2/C3 support often don't let it tick during idle, which makes it useless. There were also some other bugs that made the apicmaintimer often not used at all. I tried some other experiments - running timer over RTC and some other things but they didn't really work well neither. I rechecked the specs now and it turns out this simple change is actually enough to avoid the double ticks on the ATI systems. We just turn off IRQ 0 in the 8254 and only route it directly using the IO-APIC. I tested it on a few ATI systems and it worked there. In fact it worked on all chipsets (NVidia, Intel, AMD, ATI) I tried it on. According to the ACPI spec routing should always work through the IO-APIC so I think it's the correct thing to do anyways (and most of the old gunk in check_timer should be thrown away for x86-64). But for 2.6.16 it's best to do a fairly minimal change: - Use the known to be working everywhere-but-ATI IRQ0 both over 8254 and IO-APIC setup everywhere - Except on ATI disable IRQ0 in the 8254 - Remove the code to select apicmaintimer on ATI chipsets - Add some boot options to allow to override this (just paranoia) In 2.6.17 I hope to switch the default over to this for everybody. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Move the SMP time selection earlierAndi Kleen
SMP time selection originally ran after all CPUs were brought up because it needed to know the number of CPUs to decide if it needs an MP safe timer or not. This is not needed anymore because we know present CPUs early. This fixes a couple of problems: - apicmaintimer didn't always work because it relied on state that was set up time_init_gtod too late. - The output for the used timer in early kernel log was misleading because time_init_gtod could actually change it later. Now always print the final timer choice Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Fix the additional_cpus=.. optionAndi Kleen
It didn't set up the CPU possible map early enough, so the option didn't actually work. Noticed by Heiko Carstens Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Disable ACPI blacklist by year for now on x86-64Andi Kleen
ACPI is initialized very early on x86-64, before the DMI code is initialized. This means it would often discover a 0 year and then turn off ACPI because it thought the BIOS was too old. Some systems don't boot without ACPI so this was a problem. I have a full fix by adding new very early DMI detection, but it needs more testing before it can be merged. For 2.6.16 let's just turn the check off. It never made much sense anyways because there are no x86-64 systems older than 2002 or so and they generally all have working ACPI. Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Fix NMI watchdog on x460Chris McDermott
[description from AK] Old check for the IO-APIC watchdog during the timer check was wrong - it obviously should only drop into this if the IO-APIC watchdog is used. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86-64/i386: Use common X86_PM_TIMER option and make it EMBEDDEDAndi Kleen
This makes x86-64 use the common X86_PM_TIMER Kconfig entry in drivers/acpi And since PM timer is needed for correct timing on a lot of systems now (e.g. AMD dual cores) and we often get bug reports from people who forgot to set it make it depend on CONFIG_EMBEDDED. x86-64 had this change before and it's a good thing. I also fixed the description slightly to make this more clear. Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] i386: Handle non existing APICs without panicingAndreas Deresch
[description from AK] This fixes booting in APIC mode on some ACER laptops. x86-64 did a similar change some time ago. See http://bugzilla.kernel.org/show_bug.cgi?id=4700 for details Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Only do the clustered systems have unsynchronized TSC ↵Andi Kleen
assumption on IBM systems Big Unisys systems have multiple clusters too, but they have an synchronized TSC. I'm using the SMBIOS to check for vendor == IBM. Cc: Chris McDermott <lcm@us.ibm.com> Cc: "Protasevich, Natalie" <Natalie.Protasevich@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Check for bad elf entry address.Suresh Siddha
Fixes a local DOS on Intel systems that lead to an endless recursive fault. AMD machines don't seem to be affected. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: fix USER_PTRS_PER_PGDJan Beulich
The value, while currently unused in the native kernel, was off by one. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-02 01:38:02 +0000