aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-09SUNRPC: Finish API to load RPC transport implementations dynamically\"Talpey, Thomas\
Allow RPC client transport implementations to be loaded as needed, or as they become available from distributors or third-party vendors. Note that we leave the IP sockets implementation in sunrpc.o permanently, as IP functionality is always available in any kernel that runs NFS. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Provide a new API for registering transport implementations\"Talpey, Thomas\
To allow transport capabilities to be loaded dynamically, provide an API for registering and unregistering the transports with the RPC client. Eventually xprt_create_transport() will be changed to search the list of registered transports when initializing a fresh transport. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions\"Talpey, Thomas\
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions As a preface to allowing arbitrary transport modules to be loaded dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions that a transport implementation might want to use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: mark bulk read/write data in xdrbuf\"Talpey, Thomas\
Adds a flag word to the xdrbuf struct which indicates any bulk disposition of the data. This enables RPC transport providers to marshal it efficiently/appropriately, and may enable other optimizations. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFSv4: Fix a bug in nfs4_validate_mount_data()Trond Myklebust
The previous patch introduced a bug when copying the server address. Also clarify a copy into the auth_flavours array: currently the two size calculations are equivalent, but we may decide to change the size of auth_flavors[] at some point. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: use in-kernel mount argument structure for nfsv4 mounts\"Talpey, Thomas\
The user-visible nfs4_mount_data does not contain sufficient data to describe new mount options, and also is now a legacy structure. Replace it with the internal nfs_parsed_mount_data for nfsv4 in-kernel use. Signed-off-by: Tom Talpey <tmt@netapp.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: use in-kernel mount argument structure for nfsv[23] mounts\"Talpey, Thomas\
The user-visible nfs_mount_data does not contain sufficient data to describe new mount options, and also is now a legacy structure. Replace it with the internal nfs_parsed_mount_data for nfsv[23] in-kernel use. Signed-off-by: Tom Talpey <tmt@netapp.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: move nfs_parsed_mount_data structure definition\"Talpey, Thomas\
In preparation for rearranging the nfs mount argument passing, make the nfs_parsed_mount_data struct visible across nfs kernel files. Signed-off-by: Tom Talpey <tmt@netapp.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: export per-transport rpcbind netid's\"Talpey, Thomas\
The rpcbind (v3+) netid is provided by each RPC client transport. This fixes an omission in IPv6 rpcbind client support, and enables future extension. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: move per-transport rpcbind netid's\"Talpey, Thomas\
Move the TCP/UDP rpcbind netid's from the rpcbind client to a global header. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFSD: Convert printk's to dprintk's in NFSD's nfs4xdrChuck Lever
Due to recent edict to remove or replace printk's that can flood the system log. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09LOCKD: Convert printk's to dprintk's in lockd XDR routinesChuck Lever
Due to recent edict to remove or replace printk's that might flood the system log. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: Convert printk's to dprintk's in fs/nfs/nfs?xdr.cChuck Lever
Due to recent edict to replace or remove printk's that can be triggered en masse by remote misbehavior. Left a few that only occur just before a BUG. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: Add new 'mountaddr=' mount optionChuck Lever
I got the 'mounthost=' option wrong - it shouldn't look for an address value, but rather a hostname value. However, the in-kernel mount client and NFS client cannot resolve a hostname by themselves; they rely on user-land to pass in the resolved address. Create a new mount option that does take an address so that the mount program's address can be passed in. The mount hostname is now ignored by the kernel. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09[NFS] [PATCH] NFS: initialize default port in kernel mount clientJames Lentini
If no mount server port number is specified, the previous change to the kernel mount client inadvertently allows the NFS server's port number to be the used as the mount server's port number. If the user specifies an NFS server port (-o port=x), the mount will fail. The fix below sets the mount server's port to 0 if no mount server port is specified by the user. Signed-off-by: James Lentini <jlentini@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: Kernel mount client should use async bindChuck Lever
Simplify the in-kernel mount client by using autobind instead of an explicit call to rpc_getport_sync. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: RPC bind failures should be permanent for NULL requestsChuck Lever
The purpose of an RPC ping (a NULL request) is to determine whether the remote end is operating and supports the RPC program and version of the request. If we do an RPC bind and the remote's rpcbind service says "this program or service isn't supported" then we have our answer already, and we should give up immediately. This is good for the kernel mount client, as it will cause the request to fail, and then allow an immediate retry with different options. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Split another new rpcbind retry error code from EACCESChuck Lever
Add more new error code processing to the kernel's rpcbind client and to call_bind_status() to distinguish two cases: Case 1: the remote has replied that the program/version tuple is not registered (returns EACCES) Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT) This change allows more specific error processing for each of these two cases. We now fail case 2 instead of retrying... it's a server configuration error not to support even rpcbind version 2. And don't expose this new error code to user land -- convert it to EIO before failing the RPC. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add a new error code for retry waiting for another binderChuck Lever
Add new error code processing to the kernel's rpcbind client and to call_bind_status() to distinguish two cases: Case 1: the remote has replied that the program/version tuple is not registered (returns -EACCES) Case 2: another process is already in the middle of binding on this transport (now returns -EAGAIN) This change allows more specific retry processing for each of these two cases. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Retry bad rpcbind repliesChuck Lever
When a server returns a bad rpcbind reply, make rpcbind client recovery logic retry with an older protocol version. Older versions are more likely to work correctly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Make rpcb_decode_getaddr more picky about universal addressesChuck Lever
Add better sanity checking of server replies to the GETVERSADDR reply decoder. Change the error return code: EIO is what other XDR decoding routines return if there is a failure while decoding. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Clean up in rpc_show_tasksChuck Lever
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’: /home/cel/linux/net/sunrpc/clnt.c:1538: warning: signed and unsigned type in conditional expression This points out another case where a conditional expression returns a signed value in one arm and an unsigned value in the other. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Make sure server name is reasonable before trying to print itChuck Lever
Check the length of the passed-in server name before trying to print it in the log. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Use correct argument type in memcpy()Chuck Lever
Noticed by Tom Talpey <tmt@netapp.com>: OBTW, there's a nit on that memcpy, too. The r_addr is an array, so memcpy(&map->r_addr is passing the address of the array as a char **. It's the same as map->r_addr, but technically the wrong type. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: fix a signed v. unsigned comparison nit in rpc_bind_new_programChuck Lever
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’: /home/cel/linux/net/sunrpc/clnt.c:445: warning: comparison between signed and unsigned RPC version numbers are u32, not int. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Only one dprintk is needed during client creationChuck Lever
Remove one of two identical dprintk's that occur when an RPC client is created. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix generation of universal addresses forChuck Lever
Fix some problems with rpcbind v3 and v4 queries from the in-kernel rpcbind client: 1. The r_addr argument must be a full universal address, not just an IP address, and 2. The universal address in r_addr is the address of the remote rpcbind server, not the RPC service being requested This addresses bugzilla.kernel.org report 8891 for 2.6.23-rc and greater. In addition, if the rpcbind client is unable to start the rpcbind request, make sure not to leak the xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2007-10-09SUNRPC: Add support for formatted universal addressesChuck Lever
"Universal addresses" are a string representation of an IP address and port. They are described fully in RFC 3530, section 2.2. Add support for generating them in the RPC client's socket transport module. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2007-10-09SUNRPC: Split xs_reclassify_socket into an IPv4 and IPv6 versionChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add a helper for extracting the address using the correct typeChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add IPv6 address support to net/sunrpc/xprtsock.cChuck Lever
Finalize support for setting up RPC client transports to remote RPC services addressed via IPv6. Based on work done by Gilles Quillard at Bull Open Source. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: create connect workers for IPv6Chuck Lever
Clone separate connect worker functions for connecting AF_INET6 sockets. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename IPv4 connect workersChuck Lever
Prepare for introduction of IPv6 versions of same. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Refactor a part of socket connect logic into a helper functionChuck Lever
Finishing a socket connect is the same for IPv4 and IPv6, so split it out into a helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: create an IPv6-savvy mechanism for binding to a reserved portChuck Lever
Clone xs_bindresvport into two functions, one that can handle IPv4 addresses, and one that can handle IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename xs_bind() to prepare for IPv6-specific bind methodChuck Lever
Prepare for introduction of IPv6-specific socket bind function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Introduce support for setting the port number in IPv6 addressesChuck Lever
We could clone xs_set_port, but this is easier overall. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add support for IPv6 to the kernel's rpcbind clientChuck Lever
Prepare for adding IPv6 support to the RPC client by adding IPv6 capabilities to rpcbind. Note that this is support on the query side only; registering IPv6 addresses with the local portmapper will come later. Note we have to take care not to fall back to using version 2 of the rpcbind protocol if we're dealing with IPv6 address. Version 2 doesn't support IPv6 at all. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add a function to format IPv6 addressesChuck Lever
Clone xs_format_ipv4_peer_addresses into an IPv6 version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename xs_format_peer_addressesChuck Lever
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it to xs_format_ipv4_peer_addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add hex-formatted address support to rpc_peeraddr2str()Chuck Lever
Add support for the NFS client's need to export volume information with IP addresses formatted in hex instead of decimal. This isn't used yet, but subsequent patches (not in this series) will change the NFS client to use this functionality. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Free address buffers in a loopChuck Lever
Use more generic logic to free buffers holding formatted addresses. This makes it less likely a bug will be introduced when adding additional buffer types in xs_format_peer_address(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Use standard macros for printing IP addressesChuck Lever
include/linux/kernel.h gives us some nice macros for formatting IP addresses. Use them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix a signed v. unsigned comparison in net/sunrpc/xprtsock.cChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix a signed v. unsigned comparison in rpcbind's XDR routinesChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09[NFS] [PATCH] NFS: show addr=ipaddr in /proc/mounts rather thanJeff Layton
A minor thing, but useful when working with a server with multiple addrs. This looks like it might also be necessary if Miklos' effort to eliminate /etc/mtab ever comes to fruition. When displaying mount options in /proc/mounts, the kernel prints "addr=hostname". This info is redundant since we already have the hostname displayed as part of the "device" section of the mount. This patch changes it to display the IP address to which the socket is connected. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09[NFS] [PATCH] nfs: tiny makefile cleanupChristoph Hellwig
no need to set up foo-objs these days. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09Re: [NFS] [PATCH] Attribute timeout handling and wrapping u32 jiffiesFabio Olive Leite
I would like to discuss the idea that the current checks for attribute timeout using time_after are inadequate for 32bit architectures, since time_after works correctly only when the two timestamps being compared are within 2^31 jiffies of each other. The signed overflow caused by comparing values more than 2^31 jiffies apart will flip the result, causing incorrect assumptions of validity. 2^31 jiffies is a fairly large period of time (~25 days) when compared to the lifetime of most kernel data structures, but for long lived NFS mounts that can sit idle for months (think that for some reason autofs cannot be used), it is easy to compare inode attribute timestamps with very disparate or even bogus values (as in when jiffies have wrapped many times, where the comparison doesn't even make sense). Currently the code tests for attribute timeout by simply adding the desired amount of jiffies to the stored timestamp and comparing that with the current timestamp of obtained attribute data with time_after. This is incorrect, as it returns true for the desired timeout period and another full 2^31 range of jiffies. In testing with artificial jumps (several small jumps, not one big crank) of the jiffies I was able to reproduce a problem found in a server with very long lived NFS mounts, where attributes would not be refreshed even after touching files and directories in the server: Initial uptime: 03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07 NFS volume is mounted and time is advanced: 03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08 # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Dec 17 03:38 /local/A/foo/bar -rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar # touch /local/A/foo/bar # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Dec 17 03:47 /local/A/foo/bar -rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar We can see the local mtime is updated, but the NFS mount still shows the old value. The patch below makes it work: Initial setup... 07:11:02 up 25 days, 1 min, 0 users, load average: 0.15, 0.03, 0.04 # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:11 /local/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:11 /nfs/A/foo/bar # touch /local/A/foo/bar # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:14 /local/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:14 /nfs/A/foo/bar Signed-off-by: Fabio Olive Leite <fleite@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-0964 bit ino support for NFS clientPeter Staubach
Hi. Attached is a patch to modify the NFS client code to support 64 bit ino's, as appropriate for the system and the NFS protocol version. The code basically just expand the NFS interfaces for routines which handle ino's from using ino_t to u64 and then uses the fileid in the nfs_inode instead of i_ino in the inode. The code paths that were updated are in the getattr method and the readdir methods. This should be no real change on 64 bit platforms. Since the ino_t is an unsigned long, it would already be 64 bits wide. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Convert rpc_pipefs to use the generic filesystem notification hooksTrond Myklebust
This will allow rpc.gssd to use inotify instead of dnotify in order to locate new rpc upcall pipes. This also requires the exporting of __audit_inode_child(), which is used by fsnotify_create() and fsnotify_mkdir(). Ccing David Woodhouse. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 03:08:38 +0000