aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-16mib: add net to IP_ADD_STATS_BHPavel Emelyanov
Very simple - only ip_evictor (fragments) requires such. This patch ends up the IP_XXX_STATS patching. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16mib: add net to IP_INC_STATS_BHPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16mib: add net to IP_INC_STATSPavel Emelyanov
All the callers already have either the net itself, or the place where to get it from. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16mib: drop unused IP_INC_STATS_USERPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16ipv4: prepare net initialization for IP accountingPavel Emelyanov
Some places, that deal with IP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. So, save this net on the stack for future IP_XXX_STATS macros. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16netdrv intel: always enable VLAN filtering except in promiscous modePatrick McHardy
Currently VLAN filtering is enabled when the first VLAN is added. Obviously before that there's no point in receiving any VLAN packets. Now that we disable VLAN filtering in promiscous mode, we can keep the VLAN filters enabled the remaining time. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16netdrv intel: disable VLAN filtering in promiscous modePatrick McHardy
As discussed in this thread: http://www.mail-archive.com/netdev@vger.kernel.org/msg53976.html promiscous mode means to disable *all* filters. Currently only unicast and multicast filtering is disabled. This patch changes all Intel drivers to also disable VLAN filtering. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16net/ipv4/tcp.c: Fix use of PULLHUP instead of POLLHUP in comments.Will Newton
Change PULLHUP to POLLHUP in tcp_poll comments and clean up another comment for grammar and coding style. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16net: make __skb_splice_bits staticHarvey Harrison
net/core/skbuff.c:1335:5: warning: symbol '__skb_splice_bits' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16Merge branch 'stealer/ipvs/sync-daemon-cleanup-for-next' of ↵David S. Miller
git://git.stealer.net/linux-2.6
2008-07-16ipvs: More reliable synchronization on connection closeRumen G. Bogdanovski
This patch enhances the synchronization of the closing connections between the master and the backup director. It prevents the closed connections to expire with the 15 min timeout of the ESTABLISHED state on the backup and makes them expire as they would do on the master with much shorter timeouts. Signed-off-by: Rumen G. Bogdanovski <rumen@voicecho.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16ipvs: Use schedule_timeout_interruptible() instead of msleep_interruptible()Sven Wegener
So that kthread_stop() can wake up the thread and we don't have to wait one second in the worst case for the daemon to actually stop. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-07-16ipvs: Put backup thread on mcast socket wait queueSven Wegener
Instead of doing an endless loop with sleeping for one second, we now put the backup thread onto the mcast socket wait queue and it gets woken up as soon as we have data to process. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-07-16ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()Sven Wegener
This also moves the setup code out of the daemons, so that we're able to return proper error codes to user space. The current code will return success to user space when the daemon is started with an invald mcast interface. With these changes we get an appropriate "No such device" error. We longer need our own completion to be sure the daemons are actually running, because they no longer contain code that can fail and kthread_run() takes care of the rest. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-07-16ipvs: Use ERR_PTR for returning errors from make_receive_sock() and ↵Sven Wegener
make_send_sock() The additional information we now return to the caller is currently not used, but will be used to return errors to user space. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-07-16ipvs: Initialize mcast addr at compile timeSven Wegener
There's no need to do it at runtime, the values are constant. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-07-15iucv: fix memory leak in cpu hotplug error path.Akinobu Mita
Fix memory leak in error path in CPU_UP_PREPARE notifier. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15wireless: fix warnings from QoS patchJohannes Berg
When I removed the special "default" meaning from the QoS parameters, I forgot to update drivers and this lead to warnings because some drivers were checking for the special values and putting in defaults. This fixes that by removing the default special-casing completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15bluetooth/hci_bcsp: fix bitrev KconfigRandy Dunlap
Fix bluetooth hci_bcsp Kconfig to avoid build errors: drivers/built-in.o: In function `bcsp_prepare_pkt': hci_bcsp.c:(.text+0x7e9ac): undefined reference to `bitrev16' drivers/built-in.o: In function `bcsp_recv': hci_bcsp.c:(.text+0x7f276): undefined reference to `bitrev16' hci_bcsp.c:(.text+0x7f293): undefined reference to `bitrev16' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Ackey-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15net: refactor tcp splice receive path to improve readabilityOctavian Purdila
- move all of the details on offsets, lengths and buffers into a single function instead of doing these operation from multiple places - use a bottom up approach: try to avoid details in the high level functions, introduce them gradually as we go deeper in the function call stack With helpful feedback from Jarek Poplawski. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Acked-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Do not use TX lock to protect address lists.David S. Miller
Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Add netdev->addr_list_lock protection.David S. Miller
Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Add addr_list_lock to struct net_device.David S. Miller
This will be used to protect the per-device unicast and multicast address lists, as well as the callbacks into the drivers which configure such state such as ->set_rx_mode() and ->set_multicast_list(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMPMSGIN_INC_STATS_BHPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMPMSGOUT_INC_STATSPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMP_INC_STATS_BHPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMP_INC_STATSPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14icmp: drop unused MIB accounting wrappersPavel Emelyanov
There are ICMP_XXX_STATS that are not used in the kernel, so I remove them, not to "just patch" them later. But if there's some sense in keeping them, kick me - I will remake this set keeping them. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14inet: toss struct net initialization aroundPavel Emelyanov
Some places, that deal with ICMP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. Since I will need this net soon, I declare a struct net on the stack and use it in the existing places in a separate patch not to spoil the future ones. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14icmp: add struct net argument to icmp_out_countPavel Emelyanov
This routine deals with ICMP statistics, but doesn't have a struct net at hands, so add one. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: remove unnecessary include statementsPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: clean up hard_start_xmit functionsPatrick McHardy
Remove excessive comments and debugging, use NETDEV_TX codes, remove some empty lines. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: clean up vlan_dev_hard_header()Patrick McHardy
Remove some debugging and excessive comments, merge the two dev_hard_header calls into one. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: ethtool ->get_flags supportPatrick McHardy
Allow to query LRO settings of underlying device when VLAN RX acceleration is used. Suggested by Ben Hutchings <bhutchings@solarflare.com>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14packet: deliver VLAN TCI to userspacePatrick McHardy
Store the VLAN tag in the auxillary data/tpacket2_hdr so userspace can properly deal with hardware VLAN tagging/stripping. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14packet: support extensible, 64 bit clean mmaped ring structurePatrick McHardy
The tpacket_hdr is not 64 bit clean due to use of an unsigned long and can't be extended because the following struct sockaddr_ll needs to be at a fixed offset. Add support for a version 2 tpacket protocol that removes these limitations. Userspace can query the header size through a new getsockopt option and change the protocol version through a setsockopt option. The changes needed to switch to the new protocol version are: 1. replace struct tpacket_hdr by struct tpacket2_hdr 2. query header len and save 3. set protocol version to 2 - set up ring as usual 4. for getting the sockaddr_ll, use (void *)hdr + TPACKET_ALIGN(hdrlen) instead of (void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr)) Steps 2 and 4 can be omitted if the struct sockaddr_ll isn't needed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: deliver packets received with VLAN acceleration to network tapsPatrick McHardy
When VLAN header stripping is used, packets currently bypass packet sockets (and other network taps) completely. For locally existing VLANs, they appear directly on the VLAN device, for unknown VLANs they are silently dropped. Add a new function netif_nit_deliver() to deliver incoming packets to all network interface taps and use it in __vlan_hwaccel_rx() to make VLAN packets visible on the underlying device. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: Don't store VLAN tag in cbPatrick McHardy
Use a real skb member to store the skb to avoid clashes with qdiscs, which are allowed to use the cb area themselves. As currently only real devices that consume the skb set the NETIF_F_HW_VLAN_TX flag, no explicit invalidation is neccessary. The new member fills a hole on 64 bit, the skb layout changes from: __u32 mark; /* 172 4 */ sk_buff_data_t transport_header; /* 176 4 */ sk_buff_data_t network_header; /* 180 4 */ sk_buff_data_t mac_header; /* 184 4 */ sk_buff_data_t tail; /* 188 4 */ /* --- cacheline 3 boundary (192 bytes) --- */ sk_buff_data_t end; /* 192 4 */ /* XXX 4 bytes hole, try to pack */ to __u32 mark; /* 172 4 */ __u16 vlan_tci; /* 176 2 */ /* XXX 2 bytes hole, try to pack */ sk_buff_data_t transport_header; /* 180 4 */ sk_buff_data_t network_header; /* 184 4 */ Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Optimization to multicast name lookup algorithmAllan Stephens
This patch simplifies and speeds up TIPC's algorithm for identifying on-node and off-node destinations that overlap a multicast name sequence range. Rather than traversing the list of all known name publications within the cluster, it now traverses the (potentially much shorter) list of name publications made by the node itself, and determines if any off-node destinations exist by comparing the sizes of the two lists. (Since the node list must be a subset of the cluster list, a difference in sizes means that at least one off-node destination must exist.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Add missing locks when inspecting node list & link listAllan Stephens
This patch ensures that TIPC configuration commands that display info about neighboring nodes and their links take the spinlocks that protect the node list and link lists from changing while the lists are being traversed. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Fix bug in scope checking for multicast messagesAllan Stephens
This patch ensures that TIPC's multicast message name lookup algorithm does individualized scope checking for each published name it examines. Previously, scope checking was only done for the first name in a name table publication list, which could result in incoming multicast messages being delivered to ports publishing names with "node" scope, or not being delivered to ports publishing names with "cluster" or "zone" scope. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Eliminate improper use of TIPC_OK error codeAllan Stephens
This patch corrects many places where TIPC routines indicated successful completion by returning TIPC_OK instead of 0. (The TIPC_OK symbol has the value 0, but it should only be used in contexts that deal with the error code field of a TIPC message header.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Fix race condition that could cause accept() to failAllan Stephens
This patch ensurs that accept() returns successfully even when the newly created socket is immediately disconnected by its peer. Previously, accept() would fail if it was unable to pass back the optional address info for the socket's peer before the socket became disconnected; TIPC now allows accept() to gather peer address information after disconnection. As a bonus, the revised code accesses the socket's port more efficiently, without the overhead incurred by a reference table lookup. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Optimize pointer dereferencing when receiving stream dataAllan Stephens
This patch eliminates an unnecessary pointer dereference when accessing a stream-based socket's receive queue. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14tipc: Remove unneeded parameter to tipc_createport_raw()Allan Stephens
This patch eliminates an unneeded parameter when creating a low-level TIPC port object. Instead of returning both the pointer to the port structure and the port's reference ID, it now returns only the pointer since the port structure contains the reference ID as one of its fields. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14bnx2: Update version to 1.7.8.Michael Chan
Signed-off-by: Michael Chan <mchan@braodcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14bnx2: Support secondary MAC addresses.Benjamin Li
Add support for configuring secondary unicast addresses. There are 4 additional perfect match filters which can be used for secondary unicast address support. * Modified bnx2_set_mac_addr() to be more generic in handling the setting of the perfect match filters * Changed bnx2_set_rx_mode() to handle the unicast dev_addr_list Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14bnx2: Allow flexible VLAN tag settings.Michael Chan
Negotiate with boot code and ASF firmware to see if it can support keeping VLAN tags in the RX packets. If supported by firmware, the VLAN tag will be kept in the RX packet unless VLAN acceleration is registered. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14bnx2: Add ack parameter to bnx2_fw_sync().Michael Chan
ack=1 means wait for firmware acknowledgement, and ack=0 means don't wait. All current callers will set it to 1. In the next patch, new calls will set ack=0. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14bnx2: Add PCI ID for 5716.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <Benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 23:47:14 +0000