aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-30xen: add /sys/hypervisor supportJeremy Fitzhardinge
Adds support for Xen info under /sys/hypervisor. Taken from Novell 2.6.27 backport tree. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: clean up gate trap/interrupt constantsJeremy Fitzhardinge
Use GATE_INTERRUPT/TRAP rather than 0xe/f. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: set _PAGE_NX in __supported_pte_mask before pagetable constructionJeremy Fitzhardinge
Some 64-bit machines don't support the NX flag in ptes. Check for NX before constructing the kernel pagetables. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: resume interrupts before system devices.Ian Campbell
Impact: bugfix Xen domain restore Otherwise the first timer interrupt after resume is missed and we never get another. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen/mmu: weaken flush_tlb_other testJeremy Fitzhardinge
Impact: fixes crashing bug There's no particular problem with getting an empty cpu mask, so just shortcut-return if we get one. Avoids crash reported by Christophe Saout <christophe@saout.de> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen/mmu: some early pagetable cleanupsJeremy Fitzhardinge
1. make sure early-allocated ptes are pinned, so they can be later unpinned 2. don't pin pmd+pud, just make them RO 3. scatter some __inits around Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30x86-64: non-paravirt systems always has PSE and PGEJeremy Fitzhardinge
A paravirtualized system may not have PSE or PGE available to guests, so they are not required features. However, without paravirt we can assume that any x86-64 implementation will have them available. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30Xen: Add virt_to_pfn helper functionAlex Nixon
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
2009-03-30x86-64: remove PGE from must-have feature listJeremy Fitzhardinge
PGE may not be available when running paravirtualized, so test the cpuid bit before using it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: mask XSAVE from cpuidJeremy Fitzhardinge
Xen leaves XSAVE set in cpuid, but doesn't allow cr4.OSXSAVE to be set. This confuses the kernel and it ends up crashing on an xsetbv instruction. At boot time, try to set cr4.OSXSAVE, and mask XSAVE out of cpuid it we can't. This will produce a spurious error from Xen, but allows us to support XSAVE if/when Xen does. This also factors out the cpuid mask decisions to boot time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30NULL noise: arch/x86/xen/smp.cHannes Eder
Fix this sparse warnings: arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: remove xen_load_gdt debugJeremy Fitzhardinge
Don't need the noise. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: make xen_load_gdt simplerJeremy Fitzhardinge
Remove use of multicall machinery which is unused (gdt loading is never performance critical). This removes the implicit use of percpu variables, which simplifies understanding how the percpu code's use of load_gdt interacts with this code. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: clean up xen_load_gdtJeremy Fitzhardinge
Makes the logic a bit clearer. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: split construction of p2m mfn tables from registrationJeremy Fitzhardinge
Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29xen: separate p2m allocation from settingJeremy Fitzhardinge
When doing very early p2m setting, we need to separate setting from allocation, so split things up accordingly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29xen: disable preempt for leave_lazy_mmuJeremy Fitzhardinge
xen_mc_flush() requires preemption to be disabled for its own sanity, so disable it while we're flushing. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29x86/paravirt: use percpu_ rather than __get_cpu_varJeremy Fitzhardinge
Impact: minor optimisation percpu_read/write is a slightly more direct way of getting to percpu data. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29mm: allow preemption in apply_to_pte_rangeJeremy Fitzhardinge
Impact: allow preemption in apply_to_pte_range updates to init_mm Preemption is now allowed for lazy mmu mode, so don't disable it for the inner loop of apply_to_pte_range. This only applies when doing updates to init_mm; user pagetables are still modified under the pte lock, so preemption is disabled anyway. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/paravirt: allow preemption with lazy mmu modeJeremy Fitzhardinge
Impact: remove obsolete checks, simplification Lift restrictions on preemption with lazy mmu mode, as it is now allowed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/paravirt: finish change from lazy cpu to context switch start/endJeremy Fitzhardinge
Impact: fix lazy context switch API Pass the previous and next tasks into the context switch start end calls, so that the called functions can properly access the task state (esp in end_context_switch, in which the next task is not yet completely current). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/paravirt: flush pending mmu updates on context switchJeremy Fitzhardinge
Impact: allow preemption during lazy mmu updates If we're in lazy mmu mode when context switching, leave lazy mmu mode, but remember the task's state in TIF_LAZY_MMU_UPDATES. When we resume the task, check this flag and re-enter lazy mmu mode if its set. This sets things up for allowing lazy mmu mode while preemptible, though that won't actually be active until the next change. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/pvops: replace arch_enter_lazy_cpu_mode with arch_start_context_switchJeremy Fitzhardinge
Impact: simplification, prepare for later changes Make lazy cpu mode more specific to context switching, so that it makes sense to do more context-switch specific things in the callbacks. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/paravirt: remove lazy mode in interruptsJeremy Fitzhardinge
Impact: simplification, robustness Make paravirt_lazy_mode() always return PARAVIRT_LAZY_NONE when in an interrupt. This prevents interrupt code from accidentally inheriting an outer lazy state, and instead does everything synchronously. Outer batched operations are left deferred. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de>
2009-03-29mm: disable preemption in apply_to_pte_rangeJeremy Fitzhardinge
Impact: bugfix Lazy mmu mode needs preemption disabled, so if we're apply to init_mm (which doesn't require any pte locks), then explicitly disable preemption. (Do it unconditionally after checking we've successfully done the allocation to simplify the error handling.) Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29Merge branch 'bzip2-lzma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: bzip2/lzma: don't ask for compression mode for the default initramfs bzip2/lzma: consistently capitalize LZMA in Kconfig bzip2/lzma: clarify the meaning of the CONFIG_RD_ options bzip2/lzma: move CONFIG_RD_* options under CONFIG_EMBEDDED
2009-03-29Fix build error in <linux/irq.h>Ralf Baechle
<linux/irq.h> relies on <linux/gfp.h> and <linux/topology.h> having been included previous. If not, the errors like below will result. CC arch/mips/mti-malta/malta-int.o In file included from arch/mips/mti-malta/malta-int.c:25: include/linux/irq.h: In function ‘init_alloc_desc_masks’: include/linux/irq.h:444: error: implicit declaration of function ‘cpu_to_node’ include/linux/irq.h:446: error: ‘GFP_ATOMIC’ undeclared (first use in this function) include/linux/irq.h:446: error: (Each undeclared identifier is reported only once include/linux/irq.h:446: error: for each function it appears in.) make[3]: *** [arch/mips/mti-malta/malta-int.o] Error 1 make[2]: *** [arch/mips/mti-malta] Error 2 make[1]: *** [sub-make] Error 2 Fixed by including the two missing headers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-29sched: fix errors in struct & function commentsRandy Dunlap
Fix kernel-doc errors in sched.c: the structs don't have kernel-doc notation and the short function description needs to be one line only. Error(kernel/sched.c:3197): cannot understand prototype: 'struct sd_lb_stats ' Error(kernel/sched.c:3228): cannot understand prototype: 'struct sg_lb_stats ' Error(kernel/sched.c:3375): duplicate section name 'Description' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-29maple: fix Error in kernel-doc notationRandy Dunlap
Fix kernel-doc error in maple (it's not kernel-doc): Error(drivers/sh/maple/maple.c:782): cannot understand prototype: 'struct bus_type maple_bus_type = ' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28Merge branch 'futexes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: remove the pointer math from double_unlock_hb, fix futex: remove the pointer math from double_unlock_hb futex: clean up fault logic futex: unlock before returning -EFAULT futex: use current->time_slack_ns for rt tasks too futex: add double_unlock_hb() futex: additional (get|put)_futex_key() fixes futex: update futex commentary
2009-03-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: smack: Add a new '-CIPSO' option to the network address label configuration netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections lsm: Remove the socket_post_accept() hook selinux: Remove the "compat_net" compatibility code netlabel: Label incoming TCP connections correctly in SELinux lsm: Relocate the IPv4 security_inet_conn_request() hooks TOMOYO: Fix a typo. smack: convert smack to standard linux lists
2009-03-28Annotate struct fs_struct's usage count restrictionDavid Howells
Annotate struct fs_struct's usage count to indicate the restrictions upon it. It may not be incremented, except by clone(CLONE_FS), as this affects the check in check_unsafe_exec() in fs/exec.c. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28fix setuid sometimes wouldn'tHugh Dickins
check_unsafe_exec() also notes whether the fs_struct is being shared by more threads than will get killed by the exec, and if so sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid. But /proc/<pid>/cwd and /proc/<pid>/root lookups make transient use of get_fs_struct(), which also raises that sharing count. This might occasionally cause a setuid program not to change euid, in the same way as happened with files->count (check_unsafe_exec also looks at sighand->count, but /proc doesn't raise that one). We'd prefer exec not to unshare fs_struct: so fix this in procfs, replacing get_fs_struct() by get_fs_path(), which does path_get while still holding task_lock, instead of raising fs->count. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org ___ fs/proc/base.c | 50 +++++++++++++++-------------------------------- 1 file changed, 16 insertions(+), 34 deletions(-) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28fix setuid sometimes doesn'tHugh Dickins
Joe Malicki reports that setuid sometimes doesn't: very rarely, a setuid root program does not get root euid; and, by the way, they have a health check running lsof every few minutes. Right, check_unsafe_exec() notes whether the files_struct is being shared by more threads than will get killed by the exec, and if so sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid. But /proc/<pid>/fd and /proc/<pid>/fdinfo lookups make transient use of get_files_struct(), which also raises that sharing count. There's a rather simple fix for this: exec's check on files->count has been redundant ever since 2.6.1 made it unshare_files() (except while compat_do_execve() omitted to do so) - just remove that check. [Note to -stable: this patch will not apply before 2.6.29: earlier releases should just remove the files->count line from unsafe_exec().] Reported-by: Joe Malicki <jmalicki@metacarta.com> Narrowed-down-by: Michael Itz <mitz@metacarta.com> Tested-by: Joe Malicki <jmalicki@metacarta.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28compat_do_execve should unshare_filesHugh Dickins
2.6.26's commit fd8328be874f4190a811c58cd4778ec2c74d2c05 "sanitize handling of shared descriptor tables in failing execve()" moved the unshare_files() from flush_old_exec() and several binfmts to the head of do_execve(); but forgot to make the same change to compat_do_execve(), leaving a CLONE_FILES files_struct shared across exec from a 32-bit process on a 64-bit kernel. It's arguable whether the files_struct really ought to be unshared across exec; but 2.6.1 made that so to stop the loading binary's fd leaking into other threads, and a 32-bit process on a 64-bit kernel ought to behave in the same way as 32 on 32 and 64 on 64. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28bzip2/lzma: don't ask for compression mode for the default initramfsH. Peter Anvin
Impact: Kconfig noise reduction, documentation The default initramfs is so small that it makes no sense to worry about the additional memory taken by not double-compressing it. Therefore, don't bug the user with it. Also, improve the description of the option, which was downright incorrect. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-28bzip2/lzma: consistently capitalize LZMA in KconfigH. Peter Anvin
Impact: message formatting Consistently spell LZMA in all capitals, since it (unlike gzip or bzip2) is an acronym. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-28bzip2/lzma: clarify the meaning of the CONFIG_RD_ optionsH. Peter Anvin
Impact: Kconfig clarification Make it clear that the CONFIG_RD_* options are about what formats are supported, not about what formats are actually being used. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-28bzip2/lzma: move CONFIG_RD_* options under CONFIG_EMBEDDEDH. Peter Anvin
Impact: reduce Kconfig noise Move the options that control possible initramfs/initrd compressions underneath CONFIG_EMBEDDED. The only impact of leaving these options set to y is additional code in the init section of the kernel; there is no reason to burden non-embedded users with these options. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-28Merge branch 'linus' into core/futexesIngo Molnar
2009-03-28Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-core: Some style cleanups i2c-piix4: Add support for the Broadcom HT1100 chipset i2c-piix4: Add support to SB800 SMBus changes i2c-pca-platform: Use defaults if no platform_data given i2c-algo-pca: Use timeout for checking the state machine i2c-algo-pca: Rework waiting for a free bus i2c-algo-pca: Add PCA9665 support i2c: Adapt debug macros for KERN_* constants i2c-davinci: Fix timeout handling i2c: Adapter timeout is in jiffies i2c: Set a default timeout value for all adapters i2c: Add missing KERN_* constants to printks i2c-algo-pcf: Handle timeout correctly i2c-algo-pcf: Style cleanups eeprom/at24: Remove EXPERIMENTAL i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79 i2c: Clarify which clients are auto-removed i2c: Let checkpatch shout on users of the legacy model i2c: Document the different ways to instantiate i2c devices
2009-03-28Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits) [ARM] 5435/1: fix compile warning in sanity_check_meminfo() [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins imxfb: Fix TFT mode i.MX21/27: remove ifdef CONFIG_FB_IMX imxfb: add clock support mxc: add arch_reset() function clkdev: add possibility to get a clock based on the device name i.MX1: remove fb support from mach-imx [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined Gemini: Add support for Teltonika RUT100 Gemini: gpiolib based GPIO support v2 MAINTAINERS: add myself as Gemini architecture maintainer ARM: Add Gemini architecture v3 [ARM] OMAP: Fix compile for omap2_init_common_hw() MAINTAINERS: Add myself as Faraday ARM core variant maintainer ARM: Add support for FA526 v2 [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h [ARM] collie: fix two minor formatting nits ...
2009-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30: fastboot: remove duplicate unpack_to_rootfs() ide/net: flip the order of SATA and network init async: remove the temporary (2.6.29) "async is off by default" code Fix up conflicts in init/initramfs.c manually
2009-03-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted Blackfin arch: add RSI's definitions to bf514 and bf516 Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow Blackfin arch: sport spi needs 6 gpio pins Blackfin arch: add sport-spi related resource stuff to board file Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well Blackfin arch: Privide BF537-STAMP platform data of ADP5520 Multifunction driver Blackfin arch: enable the platfrom PATA driver with CF Cards Blackfin arch: clean up sports header file Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x Blackfin arch: bf51x processors also have 8 timers Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs Blackfin arch: update default kernel configuration Blackfin arch: include linux headers that this one uses definitions from fro sport drivers
2009-03-28Merge branch 'percpu-cpumask-x86-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits) percpu: fix spurious alignment WARN in legacy SMP percpu allocator percpu: generalize embedding first chunk setup helper percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk() percpu: make x86 addr <-> pcpu ptr conversion macros generic linker script: define __per_cpu_load on all SMP capable archs x86: UV: remove uv_flush_tlb_others() WARN_ON percpu: finer grained locking to break deadlock and allow atomic free percpu: move fully free chunk reclamation into a work percpu: move chunk area map extension out of area allocation percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free() x86, percpu: setup reserved percpu area for x86_64 percpu, module: implement reserved allocation and use it for module percpu variables percpu: add an indirection ptr for chunk page map access x86: make embedding percpu allocator return excessive free space percpu: use negative for auto for pcpu_setup_first_chunk() arguments percpu: improve first chunk initial area map handling percpu: cosmetic renames in pcpu_setup_first_chunk() percpu: clean up percpu constants x86: un-__init fill_pud/pmd/pte x86: remove vestigial fix_ioremap prototypes ... Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
2009-03-28i2c-core: Some style cleanupsZhenwen Xu
Some lines over 80. The printk(KERN_ERR ... ) should be dev_err. And some blankspace should be deleted. Signed-off-by: Zhenwen Xu <helight.xu@gmail.com> Signed-off-by: Jean Delvare <khlai@linux-fr.org>
2009-03-28i2c-piix4: Add support for the Broadcom HT1100 chipsetFlavio Leitner
Add support for the Broadcom HT1100 LD chipset (SMBus function.) Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28i2c-piix4: Add support to SB800 SMBus changesShane Huang
Add support for the AMD SB800 Family series of products. Major changes include the changes to addressing the SMBus registers at different location from the locations in the previous compatible parts from AMD such as SB400/SB600/SB700. For SB800, the main features and register definitions of SMBus and other interfaces are still compatible with the previous products with the only change being in how to access the internal registers for these blocks. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28i2c-pca-platform: Use defaults if no platform_data givenWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28i2c-algo-pca: Use timeout for checking the state machineWolfram Sang
We now timeout also if the state machine does not change within the given time. For that, the driver-specific completion-functions are extended to return true or false depending on the timeout. This then gets checked in the algorithm. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 09:09:38 +0000