aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-14Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix a TRACE_IRQS_OFF typo. sh: Optimize the setup_rt_frame() I-cache flush. sh: Populate initial secondary CPU info from boot_cpu_data. sh: Tidy up SMP cpuinfo. sh: Use boot_cpu_data for FPU tests in sigcontext paths. sh: ftrace: Fix up syscall tracepoint support. sh: force dcache flush if dcache_dirty bit set. sh: update die() output.
2009-10-14Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: oprofile: warn on freeing event buffer too early oprofile: fix race condition in event_buffer free lockdep: Use cpu_clock() for lockstat
2009-10-14Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf events: Update MAINTAINERS entry file patterns perf tools: Remove static debugfs path from parse-events perf tools: Fix the NO_64BIT build on pure 64-bit systems perf tools: Fix const char type propagation
2009-10-14Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix missing kernel-doc notation Revert "x86, timers: Check for pending timers after (device) interrupts" sched: Update the clock of runqueue select_task_rq() selected
2009-10-14Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/filters: Fix memory leak when setting a filter tracing: fix trace_vprintk call
2009-10-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/paravirt: Use normal calling sequences for irq enable/disable x86: fix kernel panic on 32 bits when profiling x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop x86, vmi: Mark VMI deprecated and schedule it for removal
2009-10-14sysfs: Allow sysfs_notify_dirent to be called from interrupt context.Neil Brown
sysfs_notify_dirent is a simple atomic operation that can be used to alert user-space that new data can be read from a sysfs attribute. Unfortunately it cannot currently be called from non-process context because of its use of spin_lock which is sometimes taken with interrupts enabled. So change all lockers of sysfs_open_dirent_lock to disable interrupts, thus making sysfs_notify_dirent safe to be called from non-process context (as drivers/md does in md_safemode_timeout). sysfs_get_open_dirent is (documented as being) only called from process context, so it uses spin_lock_irq. Other places use spin_lock_irqsave. The usage for sysfs_notify_dirent in md_safemode_timeout was introduced in 2.6.28, so this patch is suitable for that and more recent kernels. Reported-by: Joel Andres Granados <jgranado@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14sysfs: Allow sysfs_move_dir(..., NULL) again.Cornelia Huck
As device_move() and kobject_move() both handle a NULL destination, sysfs_move_dir() should do this as well (again) and fall back to sysfs_root in that case. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14tty: use the new 'flush_delayed_work()' helper to do ldisc flushLinus Torvalds
This way all flush_to_ldisc work is always done through the workqueues, and we thus have a single point of serialization. It also means that we can avoid calling flush_to_ldisc() entirely if there was no delayed work pending. [ Side note: using workqueues and keventd as the single way to enter flush_to_ldisc() still doesn't absolutely guarantee that we can't have concurrency: keventd is multithreaded and has a thread per CPU, and while the WORK_STRUCT_PENDING bit guarantees a single work only being on the pending list once, the work might be both pending and _running_ at the same time. Workqueues are not simple. ] This was also confirmed to fix bugzilla #14388, even without the earlier locking fix and cleanup (commit c8e331419: "tty: Make flush_to_ldisc() locking more robust"). So both commits fix the same bug differently, and either would have worked on its own. But I'm committing them both since they are cleanups independent of each other. Reported-and-tested-by: Boyan <btanastasov@yahoo.co.uk> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-14net: add support for STMicroelectronics Ethernet controllers.Giuseppe Cavallaro
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmac Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14workqueue: add 'flush_delayed_work()' to run and wait for delayed workLinus Torvalds
It basically turns a delayed work into an immediate work, and then waits for it to finish, thus allowing you to force (and wait for) an immediate flush of a delayed work. We'll want to use this in the tty layer to clean up tty_flush_to_ldisc(). Acked-by: Oleg Nesterov <oleg@redhat.com> [ Fixed to use 'del_timer_sync()' as noted by Oleg ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-14net: ks8851_mll uses mii interfacesRandy Dunlap
From: Randy Dunlap <randy.dunlap@oracle.com> ks8851_mll uses mii interfaces so it needs to select MII. ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl' ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset' ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset' ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok' ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net/fec_mpc52xx: Fix kernel panic on FEC errorJohn Bonesio
The MDIO bus cannot be accessed at interrupt context, but on an FEC error, the fec_mpc52xx driver reset function also tries to reset the PHY. Since the error is detected at IRQ context, and the PHY functions try to sleep, the kernel ends up panicking. Resetting the PHY on an FEC error isn't even necessary. This patch solves the problem by removing the PHY reset entirely. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14tty: Make flush_to_ldisc() locking more robustLinus Torvalds
The locking logic in this function is extremely subtle, and it broke when we started doing potentially concurrent 'flush_to_ldisc()' calls in commit e043e42bdb66885b3ac10d27a01ccb9972e2b0a3 ("pty: avoid forcing 'low_latency' tty flag"). The code in flush_to_ldisc() used to set 'tty->buf.head' to NULL, with the intention that this would then cause any other concurrent calls to not do anything (locking note: we have to drop the buf.lock over the call to ->receive_buf that can block, which is why we can have concurrency here at all in the first place). It also used to set the TTY_FLUSHING bit, which would then cause any concurrent 'tty_buffer_flush()' to not free all the tty buffers and clear 'tty->buf.tail'. And with 'buf.head' being NULL, and 'buf.tail' being non-NULL, new data would never touch 'buf.head'. Does that sound a bit too subtle? It was. If another concurrent call to 'flush_to_ldisc()' were to come in, the NULL buf.head would indeed cause it to not process the buffer list, but it would still clear TTY_FLUSHING afterwards, making the buffer protection against 'tty_buffer_flush()' no longer work. So this clears it all up. We depend purely on TTY_FLUSHING for handling re-entrancy, and stop playing games with the buffer list entirely. In fact, the buffer list handling is now robust enough that we could probably stop doing the whole "protect against 'tty_buffer_flush()'" thing entirely. However, Alan also points out that we would probably be better off simplifying the locking even further, and just take the tty ldisc_mutex around all the buffer flushing calls. That seems like a good idea, but in the meantime this is a conceptually minimal fix (with the patch itself being bigger than required just to clean the code up and make it readable). This fixes keyboard trouble under X: http://bugzilla.kernel.org/show_bug.cgi?id=14388 Reported-and-tested-by: Frédéric Meunier <fredlwm@gmail.com> Reported-and-tested-by: Boyan <btanastasov@yahoo.co.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-14net: Fix OF platform drivers coldplug/hotplug when compiled as modulesAnton Vorontsov
Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14USB: gadget: Fix EEM driver comments and VID/PIDBrian Niebuhr
Remove expository comments and fix USB VID and PID Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14usb-storage: Workaround devices with bogus sense sizeBenjamin Herrenschmidt
usb-storage: Workaround devices with bogus sense size Some devices, such as Huawei E169, advertise more than the standard amount of sense data, causing us to set US_FL_SANE_SENSE, assuming they support it. However, they subsequently fail the request sense with that size. This works around it generically. When a sense request fails due to a device returning an error, US_FL_SANE_SENSE was set, and that sense request used a larger sense size, we retry with a smaller size before giving up. Based on an original patch by Ben Efros <ben@pc-doctor.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: ehci: Fix IST boundary checking interval math.Sarah Sharp
When the EHCI driver falls behind in its scheduling, the active stream's first empty microframe may be in the past with respect to the current microframe. The code attempts to move the starting microframe ("start") N number of microframes forward, where N is the interval of endpoint. However, stream->interval is a copy of the endpoint's bInterval, which is designated in frames for FS devices, and microframes for HS devices. Convert stream->interval to microframes before using it to move the starting microframe forward. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: option: Support for AIRPLUS MCD650 DatacardHuzaifa Sidhpurwala
Here is a patch for Airplus MCD 650 card Note: This device is with Victor V Kudlak, and he confirmed that this device works with the patch. Signed-off-by: Huzaifa Sidhpurwala <sidhpurwala.huzaifa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: whci-hcd: always do an update after processing a halted qTDDavid Vrabel
A halted qTD always triggers a hardware list update because the qset was either removed or reactivated. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: whci-hcd: handle early deletion of endpointsDavid Vrabel
If an endpoint is deleted before it's been fully added to the hardware list, the associated qset will not be fully initialized and an oops will occur when complete(&qset->remove_complete) is called. This can happen if a queued URB is cancelled. Fix this by only removing the qset from the hardware list if the cancelled URB had qTDs. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: wusb: don't use the stack to read security descriptorStefano Panella
An urb's transfer buffer must be kmalloc'd memory and not point to the stack or a DMA API warning results. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: rename Documentation/ABI/.../sysfs-class-usb_hostDavid Vrabel
The usb_host class is no more. Rename its documentation file (which only contained WUSB specific files) to .../sysfs-class-uwb_rc-wusbhc. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14x86: linker script syntax nitsRoland McGrath
The linker scripts grew some use of weirdly wrong linker script syntax. It happens to work, but it's not what the syntax is documented to be. Clean it up to use the official syntax. Signed-off-by: Roland McGrath <roland@redhat.com> CC: Ian Lance Taylor <iant@google.com>
2009-10-14Staging: rt2860sta: prevent a panic when disabling when associatedDarren Salt
This fixes a panic which is triggered when the hardware "disappears" from beneath the driver, i.e. when wireless is toggled off via Fn-F2 on various EeePC models. Ref. bug report http://bugzilla.kernel.org/show_bug.cgi?id=13390 panic http://bugzilla.kernel.org/attachment.cgi?id=21928 Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14staging: more sched.h fixesJeff Mahoney
This patch contains more sched.h additions for drivers that built fine under x86_64 but not i386 for some reason. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: et131x: Fix the add_10bit macroAlan Cox
Duh.. we need to preserve the wrap bit when adding. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: et131x: Correct WRAP bit handlingAlan Cox
add_10bit loses the existing wrap value Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14staging: Complete sched.h removal from interrupt.hJeff Mahoney
Commit d43c36dc removed sched.h from interrupt.h and distributed sched.h to users which needed it. This finishes it up for staging. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: vme: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke the vme drivers. This patch fixes them. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: poch: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke the poch driver. This patch fixes this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: b3dfg: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke the b3dfg driver. This patch fixes this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: comedi: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke some of the comedi drivers. This patch fixes this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: iio: Fix missing include <linux/sched.h>Jonathan Cameron
linux/sched.h include was removed form linux/poll.h by commmit a99bbaf5ee6bad1aca0c88ea65ec6e5373e86184 Required for definition of TASK_INTERRUPTIBLE amongst others From: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14firewire: sbp2: provide fallback if mgt_ORB_timeout is missingStefan Richter
The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stopJarkko Nikula
This small typo written by author causes that McBSP receiver is disabled on OMAP2430 and OMAP3430 even if only transmitter is stopped. This was noted with ALSA SoC where simultaneous recording halted if playback was stopped first. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: Initialization of SDRC params on Zoom2Teerth Reddy
This patch initializes the correct SDRC settings required for DVFS on Zoom2. Signed-off-by: Teerth Reddy <teerth@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: RX-51: Drop I2C-1 speed to 2200Aaro Koskinen
The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited by TWL5030/GAIA; a higher speed could lead to errors on the interface. The maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz), 2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz). Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: SDMA: Fixing bug in omap_dma_set_global_params()Anuj Aggarwal
Argument tparams was not being used to program global register GCR.HI_THREAD_RESERVED. This patch fixes the same. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfigSanjeev Premi
The symbol CONFIG_ISP1301_OMAP was defined twice in the defconfig. This was causing the warning: arch/arm/configs/omap3_beagle_defconfig:972:warning: override: reassigning to symbol ISP1301_OMAP Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14tty: use the new 'flush_delayed_work()' helper to do ldisc flushLinus Torvalds
This way all flush_to_ldisc work is always done through the workqueues, and we thus have a single point of serialization. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-14workqueue: add 'flush_delayed_work()' to run and wait for delayed workLinus Torvalds
It basically turns a delayed work into an immediate work, and then waits for it to finish.
2009-10-14Make flush_to_ldisc properly handle parallel callsLinus Torvalds
2009-10-14Btrfs: always pin metadata in discard modeChris Mason
We have an optimization in btrfs to allow blocks to be immediately freed if they were allocated in this transaction and never written. Otherwise they are pinned and freed when the transaction commits. This isn't optimal for discard mode because immediately freeing them means immediately discarding them. It is better to give the block to the pinning code and letting the (slow) discard happen later. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-14Btrfs: enable discard supportChristoph Hellwig
The discard support code in btrfs currently is guarded by ifdefs for BIO_RW_DISCARD, which is never defines as it's the name of an enum memeber. Just remove the useless ifdefs to actually enable the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-14Btrfs: add -o discard optionChristoph Hellwig
Enable discard by default is not a good idea given the the trim speed of SSD prototypes we've seen, and the carecteristics for many high-end arrays. Turn of discards by default and require the -o discard option to enable them on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-14Btrfs: properly wait log writers during log syncYan, Zheng
A recently fsync optimization make btrfs_sync_log skip calling wait_for_writer in the single log writer case. This is incorrect since the writer count can also be increased by btrfs_pin_log. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-14Btrfs: fix possible ENOSPC problems with truncateJosef Bacik
There's a problem where we don't do any space reservation for truncates, which can cause you to OOPs because you will be allowed to go off in the weeds a bit since we don't account for the delalloc bytes that are created as a result of the truncate. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-14x86, perf_event: Rename 'performance counter interrupt'Li Hong
In 'cdd6c482c9ff9c55475ee7392ec8f672eddb7be6', we renamed Performance Counters -> Performance Events. The name showed up in /proc/interrupts also needs a change. I use PMI (Performance monitoring interrupt) here, since it is the official name used in Intel's documents. Signed-off-by: Li Hong <lihong.hi@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091014105039.GA22670@uhli> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14[S390] sclp_vt220 build fixMichael Holzheu
Fix this build error: next-20091013 randconfig build on s390x build breaks with drivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn' Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <michael.holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>