aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-07fix for bugzilla #7544 (keyspan USB-to-serial converter)Rainer Weikusat
At least the Keyspan USA-19HS USB-to-serial converter supports two different configurations, one where the input endpoints have interrupt transfer type and one where they are bulk endpoints. The default UHCI configuration uses the interrupt input endpoints. The keyspan driver, OTOH, assumes that the device has only bulk endpoints (all URBs are initialized by calling usb_fill_bulk_urb in keyspan.c/ keyspan_setup_urb). This causes the interval field of the input URBs to have a value of zero instead of one, which 'accidentally' worked with Linux at least up to 2.6.17.11 but stopped to with 2.6.18, which changed the UHCI support code handling URBs for interrupt endpoints. The patch below modifies to driver to initialize its input URBs either as interrupt or as bulk URBs, depending on the transfertype contained in the associated endpoint descriptor (only tested with the default configuration) enabling the driver to again receive data from the serial converter. Greg K-H reworked the patch. Signed-off-by: Rainer Weikusat <rweikusat@sncag.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: total removal of multithreaded probing in usbOliver Neukum
The whole approach is simply wrong. Forking a thread means that - errors are ignored - locking is ignored Doing this correctly would require major surgery for questionable benefit. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: at91_udc wakeup event updatesDavid Brownell
This updates the AT91 UDC driver's handling of wakeup events: - Fix a bug in the original scheme, which was never updated after the {enable,disable}_irq_wake() semantics were updated to address refcounting issues (i.e. behave for shared irqs). - Couple handling of both type of wakeup events, to be more direct. The controller can be source of wakeup events for cases like bus reset and USB resume. On some boards, VBUS sensing is also IRQ driven. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07EHCI: force high-speed devices to run at full speedAlan Stern
This patch (as710) adds a sysfs class-device attribute file named "companion" for EHCI controllers. The file contains a list of port numbers that are dedicated to the companion controller; by writing a port number to the file the user can force a high-speed device attached directly to the computer to run at full speed. (As far as I know it is not possible to do this for a device attached to an external hub.) A port is removed from the file by writing the negative of its port number. Several users have asked for this facility and it seems like a useful thing to have. Every now and then one runs across a device which behaves much better at full speed than at high speed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07EHCI: don't hide ports owned by the companionAlan Stern
This patch (as709) changes the way ehci-hcd presents port status values for ports owned by the companion controller. It no longer hides the information; in particular, it allows the core to see the disconnect event that occurs when a full- or low-speed device is switched over to the companion. This is required for the next patch in this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07EHCI: local variable for port status registerAlan Stern
This patch (as708) introduces a local variable to hold the port status-register address in ehci-hub.c. There's not much improvement in the object code, but it sure is a lot easier to read. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07usbcore: remove unused bandwith-related codeAlan Stern
This patch (as841) removes from usbcore a couple of support routines meant to help with bandwidth allocation. With the changes to uhci-hcd in the previous patch, these routines are no longer used anywhere. Also removed is the CONFIG_USB_BANDWIDTH option; it no longer does anything and is no longer needed since the HCDs now handle bandwidth issues correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07UHCI: fix bandwidth allocationAlan Stern
This patch (as840) fixes the bandwidth allocation mechanism in uhci-hcd. It has never worked correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ps3 ohci bus glueGeoff Levand
USB OHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ohci error handling cleanupBenjamin Herrenschmidt
Restructure the ohci_hcd_mod_init error handling code in to better support the multiple platform drivers. This does not change the functionality. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ps3 controller hid quirkGeoff Levand
Add the USB HID quirk HID_QUIRK_SONY_PS3_CONTROLLER. This sends an HID_REQ_GET_REPORT to the the PS3 controller to put the device into 'operational mode'. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ps3 ehci bus glueGeoff Levand
USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: better ethtool support for kawethOliver Neukum
this implements enough ethtool support to make NetworkManager happy. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: power management for kawethOliver Neukum
- implements suspend when the network interface is down - fixes a typo in comments - adds debugging output for power management - fixes a compiler warning Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07usb: gadgetfs remove delayed init modePhil Endecott
Gadgetfs had a mode in which endpoint descriptors were written by the user program before connection. This mode had some bugs, and hasn't seen much (if any) use. This patch removes that mode, leaving the mode of operation where the user program waits for endpoint 0 to report a SET_CONFIGURATION, and only then configures the endpoints. From: "Phil Endecott" <spam_from_usb_devel@chezphil.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07usb: gadgetfs whitespace cleanupDavid Brownell
Remove some whitespace bugs in gadgetfs (mostly from someone's patch updating the AIO support). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ohci-at91 refcount fix for irq wake enablesMarc Pignat
The attached patch fixes the unbalanced calls to enable_irq_wake() and disable_irq_wake() in the AT91 USB Host driver. It should resolve these kernel messages: Unbalanced IRQ x wake disable BUG: warning at kernel/irq/manage.c:167/set_irq_wake() (The original code was debugged before a bug in the genirq wakeup irq logic was fixed by adding the IRQ wake enable/disable refcounting. Not all code yet uses the bugfixed model.) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07usb-storage: SCSI level fixesAlan Stern
This patch (as835) removes from usb-storage the code which sets all devices to a SCSI level of at least SCSI-2. The original reasons for doing this no longer apply, and in fact it prevents certain kinds of ATA pass-thru commands from being used. The patch also marks CB and CBI devices that are SCSI-0 (legacy SCSI) as being single-LUN, since the combined SCSI-over-USB transport protocol has no way to convey LUN information to these devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07UHCI: no dummy TDs for Iso QHsAlan Stern
Isochronous queues don't need a dummy TD because the Queue Header isn't managed by the hardware. This patch (as836) removes the unnecessary dummy TDs. The patch also fixes a long-standing typo in a comment (a "don't" was missing -- potentially very confusing!). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07UHCI: improved debugging checks for the frame listAlan Stern
This patch (as768) improves the debugging checks for the uhci-hcd frame list. The number of entries displayed is limited to 10, and the driver now checks for the correct Skeleton QH link value at the end of each chain of Isochronous TDs. The code to compute these link values is now used in two spots, so it is moved into its own separate subroutine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: race on disconnect in mdc800Oliver Neukum
I overlooked one. Setting the flag and killing the URBs must be under the lock so that no URB is submitted after usb_kill_urb() Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: add binary API to usbmonPete Zaitcev
This patch adds a new, "binary" API in addition to the old, text API usbmon had before. The new API allows for less CPU use, and it allows to capture all data from a packet where old API only captured 32 bytes at most. There are some limitations and conditions to this, e.g. in case someone constructs a URB with 1GB of data, it's not likely to be captured, because even the huge buffers of the new reader are finite. Nonetheless, I expect this new capability to capture all data for all real life scenarios. The downside is, a special user mode application is required where cat(1) worked before. I have sample code at http://people.redhat.com/zaitcev/linux/ and Paolo Abeni is working on patching libpcap. This patch was initially written by Paolo and later I tweaked it, and we had a little back-and-forth. So this is a jointly authored patch, but I am submitting this I am responsible for the bugs. Signed-off-by: Paolo Abeni <paolo.abeni@email.it> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Add usb_endpoint_xfer_control to usb.hSarah Bailey
Added a function to check if an endpoint is a control endpoint. There were similar functions for bulk, interrupt, and isoc, but not for control endpoints. Signed-off-by: Sarah Bailey <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB Gadget file_storage.c: remove unnecessary castsJohn Daiker
Went looking through some usb stuff and found some unnecessary casts in file_storage.c This is part of the KernelJanitors TODO list. Signed-off-by: John Daiker <daikerjohn@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Bugfix for aircable: Add module and name to usb_serial_driverJohannes Hölzl
While adding the dynamic-id support to usb serial I found a small bug in the air cable driver: Adds module and name information to the usb_serial_driver instance of aircable. So the aircable driver is correctly shown under /sys/bus/usb-serial/drivers/aircable and has the module link. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add driver pointer to all usb-serial driversJohannes Hölzl
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add dynamic id support to usb-serial coreGreg Kroah-Hartman
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
2007-02-07ohci: Add support for OHCI controller on the of_platform busSylvain Munaut
PPC embedded systems can have a ohci controller builtin. In the new model, it will end up as a driver on the of_platform bus, this patches takes care of them. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07ohci: Rework bus glue integration to allow several at onceSylvain Munaut
The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07rndis_host learns ActiveSync basicsOle Andre Vadla Ravnas
Windows Mobile 5 based devices described as supporting "ActiveSync": - Speak RNDIS but lack the CDC and union descriptors. This patch updates the cdc ethernet code to fake ACM descriptors we need. - Require RNDIS_MSG_QUERY messages to include a buffer of the size the response should generate. This patch updates the rndis host code to pass this will-be-ignored data. The resulting RNDIS host code has been reported to work with several WM5 based devices. (Note that a fancier patch is available at synce.sf.net.) Some bugfixes, affecting not just ActiveSync: (a) when cleaning up after RNDS init fails, scrub the second interface just like cdc_ether does, so disconnect won't oops. (b) handle peripherals that use the pad-to-end-of-packet option; some devices can't talk to us if that option doesn't work. (c) when choosing configurations, don't forget about an RNDIS config just because the RNDIS driver is dynamically linked. Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update. Also for paranoia's sake, refuse to talk to something that looks like a real modem instead of RNDIS. Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ethernet gadget interop with MCCI Windows driverDavid Brownell
It turns out that minor tweaks to the "CDC Subset" support in the Ethernet gadget driver, just updating a config descriptor, let it be automagically recognized by a Windows driver supported by MCCI. This patch adds those descriptors, so systems using PXA 255 processors (like Gumstix etc) can interop with those commercial MS-Windows drivers. This is a Good Thing since Microsoft's RNDIS code has bugginess issues, which are unfortunately compounded by "won't fix" issues as well as "the published specs are incomplete and wrong" issues. Being able to talk to the MCCI driver gives Windows users another connectivity option. (MCCI also has CDC Ethernet drivers, which can help most non-PXA processors.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07usbcore: remove unneeded error checkAlan Stern
This patch (as830) removes some unnecessary error checking. According to the kerneldoc, schedule_work() can't fail. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: indicate active altsetting in proc/bus/usb/devices fileDavid Brownell
Update /proc/bus/usb/devices output to report active altsettings. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: devio.c add missing INIT_LIST_HEAD()Dan Carpenter
It should hopefully fix the list corruption bug on: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=214402 Add a missing INIT_LIST_HEAD() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: mutexification of rio500Oliver Neukum
this makes the rio500 misc usb driver use mutexes and turns uninterruptible sleep into interruptible sleep where the semantics are not affected. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Remove unneeded void * casts in idmouse.cTobias Klauser
The patch removes unneeded void * casts for the following (void *) pointers: - struct file: private_data The patch also contains some whitespace and coding style cleanups in the relevant areas. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: define USB_CLASS_MISC in <linux/usb/ch9.h>David Brownell
Add USB_CLASS_MISC to <linux/usb/ch9.h> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: <linux/usb_ch9.h> becomes <linux/usb/ch9.h>David Brownell
This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Fix EHCI warningBenjamin Herrenschmidt
This patch fixes a warning introduced by the big endian MMIO EHCI support patch on platforms that don't have readl_be/writel_be variants (though mostly harmless as those are called in an if (0) statement, but gcc still warns). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-02-07USB: Fix OHCI warningBenjamin Herrenschmidt
This patch fixes a warning introduces by the split endian OHCI support patch on platforms that don't have readl_be/writel_be variants (though mostly harmless as those are called in an if (0) statement, but gcc still warns). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Implement support for EHCI with big endian MMIOBenjamin Herrenschmidt
This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Implement support for "split" endian OHCIBenjamin Herrenschmidt
This patch separates support for big endian MMIO register access and big endian descriptors in order to support the Toshiba SCC implementation which has big endian registers but little endian in-memory descriptors. It simplifies the access functions a bit in ohci.h while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Rework the OHCI quirk mecanism as suggested by DavidBenjamin Herrenschmidt
This patch applies David Brownell's suggestion for reworking the OHCI quirk mechanism via a table of PCI IDs. It adapts the existing quirks to use that mechanism. This also moves the quirks to reset() as suggested by the comment in there. This is necessary as we need to have the endian properly set before we try to init the controller. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: convert usb class devices to real devicesGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: move usb_device_class class devices to be real devicesGreg Kroah-Hartman
This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: add EPIC support to the io_edgeport driverGreg Kroah-Hartman
This patch adds EPiC support to the io_edgeport driver which adds support for a number of NCR printers: - NCR (Axiohm) 7401-K580 printer - NCR (TEC) 7401-K590 printer, 7402-K592 - NCR (TEC) 7167, 7168 printers - NCR (TEC) 7197, 7198, F306, F307, F309 printers - NCR (Axiohm) 7194 printer - NCR (Axiohm) 7158 printer and a few more. It is based on the 2.6.19 kernel. Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2007-02-07USB: unusual_devs.h for Sony floppyLuiz Fernando N. Capitulino
This patch increases the range for 0x054c:0x002c devices to make the following Sony USB floppy to work: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=002c Rev=20.00 S: Manufacturer=SONY S: Product=USB Floppy C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=04 Prot=00 Driver=usb-storage E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=127ms Signed-off-by: Marcelo Ricardo Leitner <mrl@mandriva.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Remove incorrect kgdb define JFS: call io_schedule() instead of schedule() to avoid deadlock JFS: Add lockdep annotations JFS: Avoid BUG() on a damaged file system
2007-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits) [GFS2] make gfs2_writepages() static [GFS2] Unlock page on prepare_write try lock failure [GFS2] nfsd readdirplus assertion failure [DLM] fix softlockup in dlm_recv [DLM] zero new user lvbs [DLM/GFS2] indent help text [GFS2] Fix unlink deadlocks [GFS2] Put back semaphore to avoid umount problem [GFS2] more CURRENT_TIME_SEC [GFS2/DLM] fix GFS2 circular dependency [GFS2/DLM] use sysfs [GFS2] make lock_dlm drop_count tunable in sysfs [GFS2] increase default lock limit [GFS2] Fix list corruption in lops.c [GFS2] Fix recursive locking attempt with NFS [DLM] can miss clearing resend flag [DLM] saved dlm message can be dropped [DLM] Make sock_sem into a mutex [GFS2] Fix typo in glock.c [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2 ...
2007-02-07[GFS2] make gfs2_writepages() staticAdrian Bunk
On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote: >... > Changes since 2.6.20-rc6-mm2: >... > git-gfs2-nmw.patch >... > git trees >... This patch makes the needlessly global gfs2_writepages() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 04:49:28 +0000