aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-19Staging: pohmelfs: move open brace to same line on structsBill Pemberton
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: wlan-ng: Update README file. Remove Lindent taskMithlesh Thukral
Remove Lindent changes as a TODO item in the wlan-ng directory of staging tree. Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: wlan-ng: Lindent cleanupsMithlesh Thukral
Lindent script cleanups in wlan-ng driver in the staging tree. This is a item in the TODO list. Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: wlan-ng: p80211wext.c: problem with IW_ENCODE_ALG_WEPJulia Lawall
The expression !(ext->alg & IW_ENCODE_ALG_WEP) appears to be incorrect, because there are several possible values for ext->alg that give 1 when bit-anded with IW_ENCODE_ALG_WEP. Therefore Richard Kennedy suggested to rewrite the code with != Added \n at the end of the debug string as well. Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: wlan-ng: Change KERN_DEBUG or pr_debug to match orig driverKarl Relton
Change uses of KERN_DEBUG over to pr_debug to match original driver where messages are only needed during driver development. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: wlan-ng: Move firmware loading into driverKarl Relton
Move prism2 firmware loading from userspace into driver, using linux request_firmware(). Firmware is now loaded (if available) on device probing, before it is registered as a netdevice and advertised to userspace. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: winbond: mac80211 - unify config_interface and bss_info_changedTim Gardner
The commit 'mac80211: unify config_interface and bss_info_changed' from Johannes Berg <johannes@sipsolutions.net> removed the config_interface structure tag from struct ieee80211_ops. The BSSID detection functionality migrated to ieee80211_ops.bss_info_changed. Since wbsoft_config_interface() was largely empty, there wasn't much to do other then to remove the function itself. There is currently no support for BSSID change detection. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: merge rest of wbhal.c to phy_calibration.cPekka Enberg
Impact: cleanup The remaining functions are local to phy_calibration.c so move them there and remove wbhal.c. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: inline hal_set_rf_power() to mto.cPekka Enberg
Impact: cleanup It's a trivial wrapper that is used in only one place, so lets inline it. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: merge wbhal.c to wbusb.cPekka Enberg
Impact: cleanup This patch moves all the functions in wbhal.c that are used only in wbusb.c to the latter file. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: reformat wbhal.cPekka Enberg
Impact: cleanup In preparation for merging wbhal.c with wbusb.c, use Lindet to reformat the file. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: make led lookup tables staticPekka Enberg
Impact: cleanup No need to keep read-only data on the stack. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: remove MODULE_AUTHORPekka Enberg
Impact: cleanup The contact details in MODULE_AUTHOR do not reflect current state of affairs so remove it. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: reformat wbusb.cPekka Enberg
Impact: cleanup Use scripts/Lindent on the file and clean up the rest by hand. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: inline hal_set_phy_type() to wb35_hw_init()Pekka Enberg
Impact: cleanup The hal_set_phy_type() is called in wb35_hw_init() only so inline the function there. Also remove a redundant assignment of ->phy_type to RF_WB_242_1. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: clean up comments in wbusb.cPekka Enberg
Impact: cleanup Remove some useless comments and clean up others. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: simplify hal_init_hardware() and hal_halt()Pekka Enberg
Impact: cleanup Now that hal_halt() is called from wb35_hw_halt() only where ->InitialResource is always set to 4, we can simplify hal_init_hardware() and hal_halt(). Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: more simplify hal_init_hardware() error handlingPekka Enberg
Impact: fix, cleanup If initialization in hal_init_hardware() fails, we call hal_halt() to clean up and release resource. However, hal_halt() will attempt to call del_timer_sync() on ->LEDTimer on "stage 3" although it's not initialized at that point. Fix that up by simplifying error handling logic in hal_init_hardware() with gotos. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: simplify hal_init_hardware() error handlingPekka Enberg
Impact: cleanup Use gotos to simplify the deep if-statement nesting in hal_init_hardware(). Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: simplify error handling in wb35_hw_init()Pekka Enberg
Impact: cleanup Change hal_init_hardware() to return an error code rather than a boolean to simplify error handling in wb35_hw_init(). Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: move hal_init_hardware() and hal_halt() int wbusb.cPekka Enberg
Impact: cleanup The hal_init_hardware() and hal_halt() functions are only used in wbusb.c so move them there. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: replace switch error handling with gotos in wb35_hw_init()Pekka Enberg
Impact: cleanup This patch replaces the switch-based error handling in wb35_hw_init() with regular gotos. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: w35und: remove unused code from wbsoft_configure_filter()Pekka Enberg
We don't initialize hardware multicast filter in the driver nor do we know how to do that. Therefore, remove some code that isn't actually used from wbsoft_configure_filter(). Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging winbond: boolean negation and bitwise operation in wrong orderDiego Liziero
The semantic patch that makes this change is: (http://www.emn.fr/x-info/coccinelle/) @@ expression E; constant C; @@ ( - !E == C + E != C ) Signed-off-by: Diego Liziero <diegoliz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: otus: beyond ARRAY_SIZE of wd->ap.wds.encryModeRoel Kluin
Do not go beyond ARRAY_SIZE of wd->ap.wds.encryMode Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: otus: 80211core/ccmd.c: Fix Coding StyleDragoslav Zaric
Signed-off-by: Dragoslav Zaric <dragoslav.zaric.kd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: remove driver_data direct access of struct deviceGreg Kroah-Hartman
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: fix operator precedence errorsRoel Kluin
`!' has a higher precedence than `&' and `|' has a higher precedence than `?' Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: stlc45xx: replace print_mac with %pMAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: remove unused #include <linux/version.h>'sHuang Weiyi
Remove unused #include <linux/version.h>'s. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rt3070: remove dupilcated #includeHuang Weiyi
Remove dupilcated #include in drivers/staging/rt3070/rt_linux.h. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rtl8187se: wmm_param[1].ac_aci_acm_aifsn tested twiceRoel Kluin
wmm_param[1].ac_aci_acm_aifsn was tested twice, the second should have been wmm_param[3].ac_aci_acm_aifsn. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rtl8187se: convert to net_device_opsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rtl8187se: Use to_delayed_workJean Delvare
Use the recently added to_delayed_work() helper function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rt2870: Don't call sprintf() with overlapping input and output.Anders Kaseorg
The use of sprintf() to append to a buffer, as in sprintf(buf, "%sEntry: %d\n", buf, i) is not valid according to C99 ("If copying takes place between objects that overlap, the behavior is undefined."). It breaks at least in userspace under gcc -D_FORTIFY_SOURCE. Replace this construct with sprintf(buf + strlen(buf), "Entry: %d\n", i) This patch was automatically generated using perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g' perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g' Signed-off-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rt2860: Don't call sprintf() with overlapping input and output.Anders Kaseorg
The use of sprintf() to append to a buffer, as in sprintf(buf, "%sEntry: %d\n", buf, i) is not valid according to C99 ("If copying takes place between objects that overlap, the behavior is undefined."). It breaks at least in userspace under gcc -D_FORTIFY_SOURCE. Replace this construct with sprintf(buf + strlen(buf), "Entry: %d\n", i) This patch was automatically generated using perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g' perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g' Signed-off-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: rt3070: replace __FUNCTION__ usagesAlessio Igor Bogani
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: sxg: Add missing __devexit_p()Jean Delvare
The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: sxg: replace __FUNCTION__ usagesAlessio Igor Bogani
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: meilhaus: fix build warningsGreg Kroah-Hartman
This fixes some build warnings in the meilhaus driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: meilhaus: Remove long-deprecated SA_* interrupt macros.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: meilhaus, move tables to .cJiri Slaby
Remove pci and usb tables from the header and place them directly in the code. While at it, use PCI_VDEVICE() to shorten the code. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: David Kiliani <mail@davidkiliani.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: meilhaus, annotate cpi functionsJiri Slaby
Add __devinit and __devexit to pci probe/remove. Also make pci_driver static. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: David Kiliani <mail@davidkiliani.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: meilhaus, switch to misc deviceJiri Slaby
There is no need to occupy one major number because of one device. Switch to misc device, which also emits uevent, so that the dev node is also created by udev. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: David Kiliani <mail@davidkiliani.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: agnx: fix build warningsGreg Kroah-Hartman
This fixes some build warnings in the agnx driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19Staging: agnx: replace print_mac with %pMAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: agnx, fix bssid compiler warningsJiri Slaby
conf->bssid is const. Propagate const to not get compiler warnings: agnx/pci.c: In function ‘agnx_config_interface’: agnx/pci.c:319: warning: passing argument 2 of ‘agnx_set_bssid’ discards qualifiers from pointer target type agnx/pci.c:321: warning: passing argument 2 of ‘hash_write’ discards qualifiers from pointer target type Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: agnx, fix fail paths in probeJiri Slaby
Return error on fail paths instead of 0. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: agnx, remove memlens from probeJiri Slaby
Pass 0 to pci_iomap instead. It will cope with that per se. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19staging: agnx, probe cleanupJiri Slaby
- switch printks to dev_* - remove useless comments - remove useless prints (for info we can obtain from lspci or /sys) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 12:53:48 +0000