aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-07mflash: initial supportunsik Kim
This driver supports mflash IO mode for linux. Mflash is embedded flash drive and mainly targeted mobile and consumer electronic devices. Internally, mflash has nand flash and other hardware logics and supports 2 different operation (ATA, IO) modes. ATA mode doesn't need any new driver and currently works well under standard IDE subsystem. Actually it's one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have IDE interface. Followings are brief descriptions about IO mode. A. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) B. IO mode uses SRAM bus interface. C. IO mode supports 4kB boot area, so host can boot from mflash. This driver is quitely similar to a standard ATA driver, but because of following reasons it is currently seperated with ATA layer. 1. ATA layer deals standard ATA protocol. ATA layer have many low- level device specific interface, but data transfer keeps ATA rule. But, mflash IO mode doesn't. 2. Even though currently not used in mflash driver code, mflash has some custom command and modes. (nand fusing, firmware patch, etc) If this feature supported in linux kernel, ATA layer more altered. 3. Currently PATA platform device driver doesn't support interrupt. (I'm not sure) But, mflash uses interrupt (polling mode is just for debug). 4. mflash is somewhat under-develop product. Even though some company already using mflash their own product, I think more time is needed for standardization of custom command and mode. That time (maybe October) I will talk to with ATA people. If they accept integration, I will integrate. Signed-off-by: unsik Kim <donari75@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07cciss: change to discover first memory BARMike Miller
Add a method for discovering the first memory BAR. All Smart Array controllers to date have always had the the memory BAR as the first BAR. A new controller to be released later this year breaks that model. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07cciss: kernel scan thread for MSA2012Mike Miller
The MSA2012 cannot inform the driver of configuration changes since all management is out of band. This is a departure from any storage we have supported in the past. We need some way to detect changes on the topology so we implement this kernel thread. In some instances there's nothing we can do from the driver (like LUN failure) so just print out a message. In the case where logical volumes are added or deleted we call rebuild_lun_table to refresh the driver's view of the world. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07cciss: fix residual count for block pc requestsJens Axboe
We must complete the full request, so store the request count and then set the ->data_len to the residual count from the hardware. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07block: fix inconsistency in I/O stat accounting codeJerome Marchand
This forces in_flight to be zero when turning off or on the I/O stat accounting and stops updating I/O stats in attempt_merge() when accounting is turned off. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07block: elevator quiescing helpersJens Axboe
Simple helper functions to quiesce the request queue. These are currently only used for switching IO schedulers on-the-fly, but we can use them to properly switch IO accounting on and off as well. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-06NFS: Fix a double free in nfs_parse_mount_options()Trond Myklebust
Due to an apparent typo, commit a67d18f89f5782806135aad4ee012ff78d45aae7 (NFS: load the rpc/rdma transport module automatically) lead to the 'proto=' mount option doing a double free, while Opt_mountproto leaks a string. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06ext3: make default data ordering mode configurableLinus Torvalds
This makes the defautl ext3 data ordering mode (when no explicit ordering is set) configurable, so as to allow people to default to 'data=writeback' and get the resulting latency improvements. This is a non-issue if a filesystem has been explicitly set to some ordering (with 'tune2fs'). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix recovery bug UBIFS: add R/O compatibility UBIFS: fix compiler warnings UBIFS: fully sort GCed nodes UBIFS: fix commentaries UBIFS: introduce a helpful variable UBIFS: use KERN_CONT UBIFS: fix lprops committing bug UBIFS: fix bogus assertion UBIFS: fix bug where page is marked uptodate when out of space UBIFS: amend key_hash return value UBIFS: improve find function interface UBIFS: list usage cleanup UBIFS: fix dbg_chk_lpt_sz()
2009-04-06Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: add fsync capability
2009-04-06exit_notify: kill the wrong capable(CAP_KILL) checkOleg Nesterov
The CAP_KILL check in exit_notify() looks just wrong, kill it. Whatever logic we have to reset ->exit_signal, the malicious user can bypass it if it execs the setuid application before exiting. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06LANANA: Fix datesAlan Cox
As noted by Janne Grunau it would be good if the date was also right. (Web site also resynched) Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06md/raid1: fix build breakageAlexander Beregalov
Fix this build error: drivers/md/raid1.c: In function 'raid1_congested': drivers/md/raid1.c:589: error: 'BDI_write_congested' undeclared BDI_write_congested was changed in commit 1faa16d228 ("block: change the request allocation/congestion logic to be sync/async based") Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250: Fix warningAlan Cox
The 8430 patch was short a const so caused a warning. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06rio: addition has higher precedence than ?:Roel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06symbol: Remove various bits of left over junkAlan Cox
There are various bits of code here that are unfinished and instead of being harmless either confuse or spew stuff into the logs at higher than debug level. They can and should go away. Also remove the bogus use of tty->lowlatency. We fixed the need for this hack long ago (with the flip buffer rewrite) but people keep copying it into drivers. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06tty: pl2303 needs identifiers for Siemens S81 as well as EF81Alan Cox
Closes bug 9065 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06cdc-acm: zydas 1602 identifier neededAlan Cox
Bugzilla #9095 and a couple of other confirmations Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06icom: remove unused variablesBreno Leitao
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06mux: fix build problemAlexander Beregalov
Fixes: In file included from drivers/serial/mux.c:37: include/linux/serial_core.h: In function 'uart_handle_sysrq_char': include/linux/serial_core.h:467: error: 'struct uart_port' has no member named 'sysrq' include/linux/serial_core.h:468: error: 'struct uart_port' has no member named 'sysrq' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jsm: Fix the return variable and removing the unused retval.Breno Leitao
As it was, the retval was never returned, so its assignments were silly. Just consolidate everything to rc, and remove the unused retval variable. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jsm: define init function as __devinitBreno Leitao
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06mxser: remove tty_port_tty_get from mxser_check_modem_statusJiri Slaby
mxser_check_modem_status is called with tty parameter, so the reference should be increased by callers already -- for ioctl syscall it is held whole time gap since open to close, for interrupt, the reference count is increased in the irq handler. There is no tty_kref_put in that function, so this also fixes a refcounting bug. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06tty: moxa, fix refcounting in moxa_poll_portJiri Slaby
There is missing tty_kref_put on some paths in moxa_poll_port, although the reference is always taken. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reported-by: Jan 'Yenya' Kasprzak <kas@fi.muni.cz> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06isicom: isicom kref leak fixAlan Cox
The isicom driver leaks a kref on the shutdown path. Drop the additional kref we took Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06ucc: Fix leaky error pathAlan Cox
Found by Daniel Marjamäki using cppcheck Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06riscom8: Auto-load riscom8 module when device opened.Scott James Remnant
The riscom8 module is missing the char-major-48-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06usb: Auto-load cdc_acm module when device opened.Scott James Remnant
The cdc_acm module is missing the char-major-166-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06specialix: Auto-load specialix module when device opened.Scott James Remnant
The specialix module is missing the char-major-75-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06cyclades: Auto-load cyclades module when device opened.Scott James Remnant
The cyclades module is missing the char-major-19-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06applicom: Auto-load applicom module when device opened.Scott James Remnant
The applicom module is missing the char-major-10-157 alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Subtract ANOMALY_05000230 on quotGraf Yang
Fix bug - up arrow key works abnormal for bf561 ezkit board Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Fix DMA rx ring buffer handlingSonic Zhang
Reported-by: Qian Zhang <zhangq@sansitech.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Fix tty compile error in PIO modeSonic Zhang
Fixes this compile issue: drivers/serial/bfin_5xx.c: In function bfin_serial_rx_chars: drivers/serial/bfin_5xx.c:178: error: struct uart_info has no member named tty Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Use unsigned long for flags with irq functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: BF538/9 serial uart supportMichael Hennerich
Enable third UART on BF538/9 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pci: add support for National Instruments legacy 8420 RS232 boardsWill Page
Signed-off-by: Will Page <will.page@ni.com> Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pci: add support for National Instruments 843x RS232 devicesShawn Bohrer
This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06serial: Update PNP IDsMatthew Garrett
Add new Wacom device IDs to the 8250_pnp serial driver, to support autoconfig on some newer tablet PCs. Also add a comment to clarify that the FUJ02E6 device is a custom protocol, not a Wacom tablet. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pnp.c: add another Wacom tabletDanny Kukawka
Add another serial Wacom tablet with pnp_id: WACF009. Signed-off-by: Danny Kukawka <dkukawka@suse.de> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Make CONFIG_SLOW_WORK an automatic rather than manual config optionDavid Howells
Make CONFIG_SLOW_WORK an automatic rather than manual config option so that people configuring their kernels don't have to make the choice. It can be selected automatically by those things that require it (such as FS-Cache). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06FRV: Fix compile breakageAdrian Bunk
This patch fixes the follwing build error caused by commit 7ca43e7564679604d86e9ed834e7bbcffd8a4a3f (mm: use debug_kmap_atomic): ... AS arch/frv/mm/tlb-miss.o In file included from arch/frv/mm/tlb-miss.S:13: ... Assembler messages: include/asm-generic/ioctl.h:73: Error: unrecognized instruction `extern unsigned int __invalid_size_argument_for_IO...' ... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: drivers/pci/intr_remapping.c: include acpi.h intel-iommu: Fix oops in device_to_iommu() when devices not found. intel-iommu: Handle PCI domains appropriately. intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges. x2apic/intr-remap: decouple interrupt remapping from x2apic x86, dmar: check if it's initialized before disable queue invalidation intel-iommu: set compatibility format interrupt Intel IOMMU Suspend/Resume Support - Interrupt Remapping Intel IOMMU Suspend/Resume Support - Queued Invalidation Intel IOMMU Suspend/Resume Support - DMAR intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros
2009-04-06Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md/raid1 - don't assume newly allocated bvecs are initialised.
2009-04-06drivers/pci/intr_remapping.c: include acpi.hAlexander Beregalov
Fix this build error: drivers/pci/intr_remapping.c: In function 'ir_parse_ioapic_scope': drivers/pci/intr_remapping.c:617: error: invalid use of undefined type 'struct acpi_dmar_hardware_unit' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06percpu: __percpu_depopulate_mask can take a const maskStephen Rothwell
This eliminates a compiler warning: mm/allocpercpu.c: In function 'free_percpu': mm/allocpercpu.c:146: warning: passing argument 2 of '__percpu_depopulate_mask' discards qualifiers from pointer target type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06docs: alphabetize entries in kernel-parameters.txtRandy Dunlap
Move entries to be in alpha order as specified near the beginning of this file. Clean up some whitespace and line-length miscues. Add '=' to "selinux" option syntax. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06docbook: fix fatal filename errorRandy Dunlap
Fix docbook fatal error: docproc: block/blktrace.c: No such file or directory Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06kernel/sysctl.c: avoid annoying warningsLinus Torvalds
Some of the limit constants are used only depending on some complex configuration dependencies, yet it's not worth making the simple variables depend on those configuration details. Just mark them as perhaps not being unused, and avoid the warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 04:52:33 +0000