aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-16qeth: allow dynamic change of rx checksummingFrank Blaschka
Technically there is no need to set the card offline to change RX checksumming. Get rid of this stupid limitation. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: rework TSO functionsFrank Blaschka
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This patch reduces gso_max_size to this value and adds some sanity checks and statistics to the TSO implementation. Since only layer 3 is able to do TSO move all TSO related functions to the qeth_l3 module. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: Recognize return codes of ccw_device_set_onlineUrsula Braun
Setting a qeth device online requires to call function ccw_device_set_online() for read-, write-, and data-subchannel. Failures should be detected immediately without an attempt to invoke follow-on activity qeth_qdio_clear_card()., In addition, ccw_device_set_online calls are consolidated in qeth_core_main.c only. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: remaining EDDP cleanupUrsula Braun
EDDP code has been removed from qeth in 2009. This patch removes two useless remaining EDDP-references. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: Exploit Connection IsolationEinar Lueck
Isolate data connection to a shared OSA card against other data connections to the same OSA card. Connectivity between isolated data connections sharing the same OSA card is therefore possible only through external network gear (e.g. a router). Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15remove deprecated and not used: print_mac()Marin Mitov
The function print_mac in net/ethernet/eth.c is marked __deprecated and not used. Remove it. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15bonding: fix 802.3ad standards compliance errorJay Vosburgh
The language of 802.3ad 43.4.9 requires the "recordPDU" function to, in part, compare the Partner parameter values in a received LACPDU to the stored Actor values. If those match, then the Partner's synchronization state is set to true. The current 802.3ad implementation is performing these steps out of order; first, the synchronization check is done, then the paramters are checked to see if they match (the synch check being done against a match check of a prior LACPDU). This causes delays in establishing aggregators in some circumstances. This patch modifies the 802.3ad code to call __choose_matched, the function that does the "match" comparisions, as the first step of __record_pdu, instead of immediately afterwards. This new behavior is in compliance with the language of the standard. Some additional commentary relating to code vs. standard is also added. Reported by Martin Patterson <martin@gear6.com> who also supplied the logic of the fix and verified the patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15vlan: Use __vlan_hwaccel_put_tag() in rxEric Dumazet
Commit 05423b241311c9380 (vlan: allow null VLAN ID to be used) forgot to update __vlan_hwaccel_rx() & vlan_gro_common() We need to set VLAN_TAG_PRESENT flag in skb->vlan_tci Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Update version to 3.104Matt Carlson
This patch updates the tg3 version to 3.104. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Fix DIDs, Enable 5717 supportMatt Carlson
This patch fixes the 5717 variant device ID enumerations and adds those DIDs to the PCI ID table. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add rx prod ring consolidationMatt Carlson
This patch adds code to funnel each MSI-X vector's rx packet buffers into a single set of producer rings which will then be submitted to the hardware. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Create aliases for rx producer mailbox regsMatt Carlson
The rx producer mailbox registers are used in several spots in the code. The addition of TG3_64BIT_REG_LOW makes register references uncomfortably long. This patch creates an alias for the standard and jumbo ring producer index registers to make the code cleaner. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Lay proucer ring handling groundworkMatt Carlson
The patch increases the number of producer rings available and implements the constructor and destructor code that deals with them. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Consider rx_std_prod_idx a hw mailboxMatt Carlson
This patch changes how the code uses the rx_std_prod_idx member. In the following patch, the code will be changed so that it will act just like a hardware mailbox. This patch prepares the code so that memory barriers can be more easily inserted. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: rename rx_[std|jmb]_ptrMatt Carlson
A later patch is going to add consumer indicies for the producer rings. To keep things readable, this patch renames rx_[std|jmb]_ptr to rx_[std|jmb]_prod_idx. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: tg3_alloc_rx_skb(tnapi => tp)Matt Carlson
This patch converts the tnapi argument of tg3_alloc_rx_skb() to tp. The level of indirection is unnecessary. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add prodring parameter to tg3_alloc_rx_skb()Matt Carlson
This patch changes the tg3_alloc_rx_skb() implementation to accept the destination producer ring set pointer as a parameter rather than assuming the source and destination producer rings are the same. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Make tg3_alloc_rx_skb() a dst-only operationMatt Carlson
This patch removes the source index parameter of tg3_alloc_rx_skb(). A later patch will make it possible for the source and destination producer rings to be different. This patch opts to make tg3_alloc_rx_skb() a destination-only implementation and move the code sensitive to the difference elsewhere. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Move napi_add calls below tg3_get_invariantsMatt Carlson
tg3_get_invariants(), among other things, discovers whether or not the device is MSI-X capable and how many interrupts it supports. This discovery needs to happen before registering NAPI instances with netdev. This patch moves the code block that calls napi_add later in tg3_init_one() so that tg3_get_invariants() has a chance to run first. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Create tg3_poll_msix() for non-zero MSIX vecsMatt Carlson
This patch gives all non-zero MSIX vectors their own NAPI handler. This will make NAPI handling for those vectors slightly more efficient. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Allow DMAs to cross cacheline boundariesMatt Carlson
By default, the 5717 (and future chips) break up PCIe DMA packets across cacheline boundaries. This isn't necessary on x86. This patch selectively loosens the restriction. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Use tg3_start_xmit_dma_bug for 5717 A0Matt Carlson
The A0 revision of the 5717 has problems with short packet fragments. It needs to use the tg3_start_xmit_dma_bug() routine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add new HW_TSO_3 flag for 5717Matt Carlson
The 5717 sets up TSO slightly differently in the transmit path. It looks like this method will be the new way of doing things. This patch defines a flag to indicate this. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Refine TSO and MSI discoveryMatt Carlson
This patch consolidates the TSO capability discovery code into its own code block. The code that decides whether or not to allow TSO is then cleaned up. Finally, the patch consolidates all MSI and MSIX capability code into a single code block. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Move TG3_FLG2_PROTECTED_NVRAM to tg3_flags3Matt Carlson
We need room for another TSO flag and it would be most efficient if it resided in tg3_flags2. This patch moves the TG3_FLG2_PROTECTED_NVRAM to tg3_flags3 to make room. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Napify tg3_start_xmit_dma_bug()Matt Carlson
This patch converts tg3_start_xmit_dma_bug() to accomodate multiple NAPI instances. This is prep work for a later patch in this series. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Don't touch RCB nic addressesMatt Carlson
This patch avoids reprogramming the RCB NIC addresses for all 5755 and later devices. The address is incorrect for 5717 devices and should be correct by default for all other affected devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add 5717 phy IDMatt Carlson
This patch adds the 5717 phy ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15net: Optimize hard_start_xmit() return checkingJarek Poplawski
Recent changes in the TX error propagation require additional checking and masking of values returned from hard_start_xmit(), mainly to separate cases where skb was consumed. This aim can be simplified by changing the order of NETDEV_TX and NET_XMIT codes, because the latter are treated similarly to negative (ERRNO) values. After this change much simpler dev_xmit_complete() is also used in sch_direct_xmit(), so it is moved to netdevice.h. Additionally NET_RX definitions in netdevice.h are moved up from between TX codes to avoid confusion while reading the TX comment. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15iwmc3200top: simplify the driver versionTomas Winkler
drop the version parts not needed for in-tree driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15iwmc3200top: use prefered style for the device table.Tomas Winkler
Use device id number directly accompany with comment rather then a #define Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15net: check the return value of ndo_select_queue()Eric Dumazet
Check the return value of ndo_select_queue(). If the value isn't smaller than the real_num_tx_queues, print a warning message, and reset it to zero. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> ---- Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15netxen: update MAINTAINERSAmit Kumar Salecha
Changing MAINTAINERS for netxen nic driver. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15hamradio/mkiss: fix typo in compat_ioctlArnd Bergmann
My last commit introduced an typo causing the compat_ioctl function to do nothing useful. The obvious way for an ioctl function to work is to look at the command, not the argument first. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-14Merge branch 'for-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2009-11-14alpha: Fixup recvmmsg syscall glueArnaldo Carvalho de Melo
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13net/can: add driver for mscan family & mpc52xx_mscanWolfram Sang
Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a phyCORE-MPC5200B-IO and a custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13Phonet: convert routing table to RCURémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13Phonet: put protocols array under RCURémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13netiucv: displayed TX bytes value much too highUrsula Braun
tx_bytes value must be updated by skb length before skb is freed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13s390: remove cu3088 layer for lcs and ctcmUrsula Braun
The cu3088-driver used as common base for lcs- and ctcm-devices makes it difficult to assign the appropriate driver to an lcs-device or a ctcm-device. This patch eliminates the cu3088-driver and thus the root device "cu3088". Path /sys/devices/cu3088 is replaced with the pathes /sys/devices/lcs and /sys/devices/ctcm. Patch is based on a proposal from Cornelia Huck. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13ctcm: suspend has to wait for outstanding I/OFrank Blaschka
State transition to DEV_STATE_STOPPED indicates all outstanding I/O has finished. Add wait queue to wait for this state. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13iucv: add work_queue cleanup for suspendUrsula Braun
If iucv_work_queue is not empty during kernel freeze, a kernel panic occurs. This suspend-patch adds flushing of the work queue for pending connection requests and severing of remaining pending connections. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13inetpeer: Optimize inet_getid()Eric Dumazet
While investigating for network latencies, I found inet_getid() was a contention point for some workloads, as inet_peer_idlock is shared by all inet_getid() users regardless of peers. One way to fix this is to make ip_id_count an atomic_t instead of __u16, and use atomic_add_return(). In order to keep sizeof(struct inet_peer) = 64 on 64bit arches tcp_ts_stamp is also converted to __u32 instead of "unsigned long". Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13ipv6: speedup inet6_dump_addr()Eric Dumazet
When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13inet: fix inet_bind_bucket_for_eachLucian Adrian Grijincu
The first "node" is supposed to be the cursor used in the for_each. The second "node" is ment literally and should not be macro expanded: it's the name of the hlist_node field from the inet_bind_bucket. This currently works because when inet_bind_bucket_for_each is called it's argument is still "node". Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13ipv4: speedup inet_dump_ifaddr()Eric Dumazet
Stephen Hemminger a écrit : > On Thu, 12 Nov 2009 15:11:36 +0100 > Eric Dumazet <eric.dumazet@gmail.com> wrote: > >> When handling large number of netdevices, inet_dump_ifaddr() >> is very slow because it has O(N^2) complexity. >> >> Instead of scanning one single list, we can use the NETDEV_HASHENTRIES >> sub lists of the dev_index hash table, and RCU lookups. >> >> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> > > You might be able to make RCU critical section smaller by moving > it into loop. > Indeed. But we dump at most one skb (<= 8192 bytes ?), so rcu_read_lock holding time is small, unless we meet many netdevices without addresses. I wonder if its really common... Thanks [PATCH net-next-2.6] ipv4: speedup inet_dump_ifaddr() When handling large number of netdevices, inet_dump_ifaddr() is very slow because it has O(N2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13ixgbe: Make queue pairs on single MSI-X interruptsPJ Waskiewicz
This patch pairs similar-numbered Rx and Tx queues onto a single MSI-X vector. For example, Tx queue 0 and Rx queue 0's interrupt with be ethX-RxTx-0. This allows for more efficient cleanup, since fewer interrupts will be firing during device operation. It also helps with a cleaner CPU affinity for IRQ affinity. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13ixgbe: Flush the LSC mask change to prevent repeated interruptsNelson, Shannon
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13igb: only recycle page if it is on our numa nodeAlexander Duyck
This patch makes it so that we only recycle pages when they are from the local NUMA node. Non-local pages are freed and replaced with locally allocated pages. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 02:59:55 +0000