aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-26Merge branch 'ibft-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'ibft-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: ibft: Update MAINTAINERS file. drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26dvb-core: Fix DoS bug in ULE decapsulation code that can be triggered by an ↵Ang Way Chuang
invalid Payload Pointer ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation has a bug that causes endless loop when Payload Pointer of MPEG2-TS frame is 182 or 183. Anyone who sends malicious MPEG2-TS frame will cause the receiver of ULE SNDU to go into endless loop. This patch was generated and tested against linux-2.6.32.9 and should apply cleanly to linux-2.6.33 as well because there was only one typo fix to dvb_net.c since v2.6.32. This bug was brought to you by modern day Santa Claus who decided to shower the satellite dish at Keio University with heavy snow causing huge burst of errors. We, receiver end, received Santa Claus's gift in the form of kernel bug. Care has been taken not to introduce more bug by fixing this bug, but please scrutinize the code for I always produces buggy code. Signed-off-by: Ang Way Chuang <wcang79@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-26Merge branch 'kmemcheck-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'kmemcheck-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: kmemcheck: Test the full object in kmemcheck_is_obj_initialized()
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-viptLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt: xfs: fix xfs to work with Virtually Indexed architectures sh: add mm API for DMA to vmalloc/vmap areas arm: add mm API for DMA to vmalloc/vmap areas parisc: add mm API for DMA to vmalloc/vmap areas mm: add coherence API for DMA to vmalloc/vmap areas
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (158 commits) [SCSI] Fix printing of failed 32-byte commands [SCSI] Fix printing of variable length commands [SCSI] libsrp: fix bug in ADDITIONAL CDB LENGTH interpretation [SCSI] scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list [SCSI] scsi_dh_alua: add netapp to dev list [SCSI] qla2xxx: Update version number to 8.03.02-k1. [SCSI] qla2xxx: EEH: Restore PCI saved state during pci slot reset. [SCSI] qla2xxx: Add firmware ETS burst support. [SCSI] qla2xxx: Correct loop-resync issues during SNS scans. [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback. [SCSI] qla2xxx: Correct EH bus-reset handling. [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out. [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands [SCSI] fix duplicate removal on error path in scsi_sysfs_add_sdev [SCSI] fix refcounting bug in scsi_get_host_dev [SCSI] fix memory leak in scsi_report_lun_scan [SCSI] lpfc: correct PPC build failure [SCSI] raid_class: add raid1e [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes. [SCSI] zfcp: Introduce header file for qdio structs and inline functions ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits) sh: remove dead LED code for migo-r and ms7724se sh: ecovec build fix for CONFIG_I2C=n sh: ecovec r-standby support sh: ms7724se r-standby support sh: SH-Mobile R-standby register save/restore clocksource: Fix up a registration/IRQ race in the sh drivers. sh: ms7724: modify scan_timing for KEYSC sh: ms7724: Add sh_sir support sh: mach-ecovec24: Add sh_sir support sh: wire up SET/GET_UNALIGN_CTL. sh: allow alignment fault mode to be configured at kernel boot. sh: sh7724: Update FSI/SPU2 clock sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec sh: add sh7724 kick callback to clk_div4_table sh: introduce struct clk_div4_table sh: clock-cpg div4 set_rate() shift fix sh: Turn on speculative return for SH7785 and SH7786 sh: Merge legacy and dynamic PMB modes. sh: Use uncached I/O helpers in PMB setup. sh: Provide uncached I/O helpers. ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-26ibft: Update MAINTAINERS file.Konrad Rzeszutek Wilk
Provide the right e-mail and names for me and Peter. Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2010-02-26drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4Joe Perches
Convert netmask to __be32 and format it with %pI4 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Konrad Rzeszutek <ketuzsezr@darnok.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2010-02-26V4L-DVB: cx88-dvb: remove extra attribution for coreMauro Carvalho Chehab
This is not needed, since the function already do it. Also, it causes a warning at the compilation, since a new var is declared in the middle of the code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (48 commits) x86/PCI: Prevent mmconfig memory corruption ACPI: Use GPE reference counting to support shared GPEs x86/PCI: use host bridge _CRS info by default on 2008 and newer machines PCI: augment bus resource table with a list PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs PCI: read bridge windows before filling in subtractive decode resources PCI: split up pci_read_bridge_bases() PCIe PME: use pci_pcie_cap() PCI PM: Run-time callbacks for PCI bus type PCIe PME: use pci_is_pcie() PCI / ACPI / PM: Platform support for PCI PME wake-up ACPI / ACPICA: Multiple system notify handlers per device ACPI / PM: Add more run-time wake-up fields ACPI: Use GPE reference counting to support shared GPEs PCI PM: Make it possible to force using INTx for PCIe PME signaling PCI PM: PCIe PME root port service driver PCI PM: Add function for checking PME status of devices PCI: mark is_pcie obsolete PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges PCI: pciehp: second try to get big range for pcie devices ...
2010-02-26V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] indexBaruch Siach
When code <= V4L2_MBUS_FMT_FIXED soc_mbus_get_fmtdesc returns a pointer to mbus_fmt[x], where x < 0. Fix this. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: Add support for SMT7020 to cx88Dirk Herrendoerfer
This patch adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family. Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name> Signed-off-by: Helmut Auer <helmut@helmutauer.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: radio-si470x: Use UTF-8 encoding on a commentTobias Lorenz
This cosmetic patch corrects a wrong unicode "micro" character in a comment. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: MAINTAINERS: Telegent tlg2300 section fixJoe Perches
linux-next commit 2ff8223957d901999bf76aaf2c6183e33a6ad14e exposes an infinite loop defect in scripts/get_maintainer.pl Fix the incorrect format of the MAINTAINERS "M:" entries. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_stv06xx: Add support for camera buttonHans de Goede
Only tested with an stv6422 based cam, as that is the only stv06xx cam I have with a button. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: add support for the button on ov511 based camsHans de Goede
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: Add support for the button on ov518 based camsHans de Goede
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: add support for the button on ov519 based camsHans de Goede
Note due to hardware limitiations (no interrupt endpoint), this only works when the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not setHans de Goede
gspca_main: Fix a compile error when CONFIG_INPUT is not set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: some input error handling fixesHans de Goede
2 small changes to input device error handling: 1) Make it fatal when we fail to create an input device (it is either this or add checks for gspca_dev->input_dev being NULL in a lot of places) 2) Since we allow gspca_input_create_urb() to fail everywhere we call it, and thus never check its return value, make it void. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputsHans de Goede
Allow use of the gspca core input device creation code by subdrivers which have non interrupt driven camera buttons. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_pac7302: much improved exposure controlHans de Goede
My experience with fixing up the controls for the PAS sensors in sonixb, has lead me to re-investigate the exposure control for the pac7302. I've now found a regular exposure register in register bank 3 (which seems to be the sensor registers bank), and with this added a proper fine grained exposure control. This patch also updates the do_autogain function to work properly with this new finer grained control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 camerasHans de Goede
Make the sonixb driver handle pas106 and pas202 cameras, when both it and the sn9c102 driver are enabled in the kernel configuration. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrlsHans de Goede
Fixup brightness ctrl and add gain and exposure ctrls for PAS106B sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: Documentation: gspca.txt: update known mr97310a camsHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPixTheodore Kilgore
This camera has a sensor type we did not support sofar, this patch adds support for the new sensor type found in the Sakar 1638x CyberPix. Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480Hans de Goede
In 640x480, if the reg11 has less than 4, the image is unstable (the bridge goes into a higher compression mode which we have not reverse engineered yet). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and ↵Hans de Goede
exposure ctrls Fixup brightness ctrl and add gain and exposure ctrls for PAS202BCB sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine ↵Hans de Goede
expo ctrl Some sensors only allow controlling the exposure by changing the clockdiv, which means that exposure takes pretty large jumps (for example when going from a div of 1 to 2, the exposure doubles). Use 2 different entries in the controls array for these 2 different types of exposure (always disabling one), and; Add a new autogain algorithm for the coarse exposure case, which normally changes the gain setting, only touching the exposure setting if the desired luminance cannot be reached with gain, and after an exposure change once more first tries gain, etc. Thus avoiding exposure changes, and the resulting oscilation because of the huge steps these exposure controls take. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: leave bridge gain at 1.0 when we have a sensor gainHans de Goede
Leave bridge gain at 1.0 when we have a sensor gain, while at it also change the bridge gain setting code to write both registers in one go saving us a usb transaction. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixj: Add camera button supportHans de Goede
gspca_sonixj: Add camera button support Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: Add support for camera buttonHans de Goede
gspca_sonixb: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_zc3xx: Add support for camera buttonHans de Goede
gscpa_zc3xx: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_pac7311: Add support for camera buttonHans de Goede
gscpa_pac7311: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_pac207: Add support for camera buttonHans de Goede
gscpa_pac207: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa Documentation: add cpia1 camerasHans de Goede
gscpa Documentation: add cpia1 cameras Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sq905c: Add an additional USB-IDHans de Goede
gspca_sq905c: Add an additional USB-ID Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_mr97310a: Simplify sensor detectionTheodore Kilgore
Simplify sensor detection a bit (share more of the code between cif and vga cameras). Also remove an unnecessary write from zero_the_pointer(). Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Tweak Sony GigaPocket Kikyou card entry based on experimentsAndy Walls
Based on experiments by Eric Wescott, edit the Sony GigaPocket (Kikyou) card entry video and audio mux settings. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Add initial entry for Sony VAIO Giga Pocket (Kikyou) cardsEric Anderson
This is a slightly modified version of Eric Anderson's original patch for the Sony Giga Pocket board. It has been updated to apply to the latest ivtv driver version by Hans Verkuil <hverkuil@xs4all.nl> and Andy Walls <awalls@radix.net>. Also Andy Walls modified the patch to use a new Sony BTF-Pnx01Z tuner entry based on Eric Anderson's experimental findings for the bandswitch. >From Eric Anderson's original email: 1. The tuner on the card doesn't seem to match any standard ones. I modified an existing tuner entry. Ideally a new tuner entry should be created. (The only difference from the one I modified is that the low-to-mid range frequency cut-off is slightly different, as are the bit config settings.) 2. It wasn't obvious how to choose a second audio input other than using "radio" as an option. Basically there's two GPIO audio inputs. Using radio allowed me to avoid major restructuring to the code. (perhaps other cards don't have this often...) 3. It's not clear that there's a mute setting that works. Not sure why. 4. I haven't had a chance to test the two Svideo inputs. I set them to COMPOSITE1 and SVIDEO2, but I'm not sure those are the correct settings. The standard composite video inputs seem to work. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: tuner-types: Add Sony BTF-Pxn01Z tuner type used on GigaPocket cardsAndy Walls
Sony makes custome tuners for its GigaPocket line of ivtv based capture cards. This adds an entry to the tuner-types list for such tuners. Parameters are based on experiments by Eric Anderson <rico99@sbcglobal.net>. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Fix ivtv_api_get_data() to avoid unneeded IO during IRQ handlingAndy Walls
ivtv_api_get_data() was performing more PCI MMIO than needed, resulting often in it accounting for more than half the total time spent in ivtv_irq_handler(). Now it only reads at most 7 of the 16 mailbox data words over the PCI bus, and in some instances only 2 or 3 data words as needed. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - build environment for isif driverMurali Karicheri
Adding Makefile and Kconfig for ISIF driver Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - vpss driver enhancements for DM365Murali Karicheri
Enhancements to support DM365 ISP5 and VPSS module configuration. Also cleaned up the driver by removing redundant variables. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365Murali Karicheri
This is the source file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - header files for ISIF driverMurali Karicheri
This is the header file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Adjust 300msec digitizer wait to be more selectiveMike Isely
We know that the 300msec settling time after starting the digitizer is only really needed when the digitizer is a SAA7115. So if we're not using a SAA7115, skip the delay. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>