aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-28gxfb: add power management functionalityAndres Salomon
This adds the ability to suspend/resume the gxfb driver, which includes: - The addition of a Graphics Processor register table in gxfb.h, and associated GP handling. - Register and palette saving code; registers are stored in gxfb_par. A few MSR values are saved as well. - gx_powerup and gx_powerdown functions which restore/save registers and enable/disable graphic engines. - gxfb_suspend/gxfb_resume Originally based on a patch by Jordan Crouse. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: stop sharing code with gx1fbAndres Salomon
We want to stop sharing stuff with gx1fb; it makes little sense. There were fields in geodefb_par that weren't being used, there was little point to the DC/VP ops callbacks, etc. This implements the following: - Create gxfb_par (based on geodefb_par), place it in gxfb.h - Drop display_gx.h and video_gx.h. The last few patches moved most stuff into gxfb.h anyways, so there was very little left. - Drop the geode_{dc,vid}_ops stuff. Un-static functions, add declarations to gxfb.h. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: move MSR bit fields into gxfb.hAndres Salomon
This continues the gxfb header cleanups. MSRs are defined in geode.h; the specific bits we care about are defined in gxfb.h. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: clean up register definitionsAndres Salomon
This does the following in preparation for register saving: - moves the register definitions from video_gx.h and display_gx.h into gxfb.h. - renames GX_* registers to match their section (ie, VP_). - renames register bitfields to match the data sheet (ie, DC_DCFG_TGEN -> DC_DISPLAY_CFG_TGEN). - for DC registers, rather than defining to specific addresses, use an enum to number them sequentially and just multiply by 4(bytes) to access them (in read_dc/write_dc). - for VP and FP registers, use an enum and multiple by 8 (bytes). They're 64bit registers. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: create DC/VP/FP-specific handlers rather than using readl/writelAndres Salomon
This creates read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for reading and updating those registers. It creates gxfb.h to house these. We also drop a no-op readl() from gx_set_mode. Other than that, there should be no functionality change. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: replace FBSIZE config option with a module parameterAndres Salomon
Use a command line option (vram) rather than hardcoding the vram size. LxFB already does this; it's useful for machines that can't query the BIOS for fb size. This patch originated from David Woodhouse, was modified by Jordan Crouse, and was then modified further by me. This also adds some gxfb documentation in Documentation/fb. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: use PCI_DEVICE() for gxfb's pci device tableAndres Salomon
Drop the class/class_mask stuff; it's unnecessary as long as the vendor and device IDs match. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: don't enable the CRT DACs when we are in flatpanel modeJordan Crouse
When the FP strap is enabled, don't turn on the CRT DACs - that will save about 35 mA of power. Updated/cleaned up by Andres Salomon. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gxfb: set the right registers to tweak the sync polarityJordan Crouse
While running in flatpanel mode it is important to change the FP sync bits (VG register 0x408) rather then the CRT sync bits (VG register 0x008). This patch keeps the CRT sync bits at default when a flatpanel exists. Note that this also fixes inverted logic; we want CRT_VSYNC_POL to be set (ie, vsync is normally high) when FB_SYNC_VERT_HIGH_ACT is unset. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28x86: GEODE: add Virtual Systems Architecture detectionAndres Salomon
This is generic VSA2 detection. It's used by OLPC to determine whether or not the BIOS contains VSA2, but since other BIOSes are coming out that don't use the VSA (ie, tinybios), it might end up being useful for others. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28x86: geode: MSR cleanupAndres Salomon
This cleans up a few MSR-using drivers in the following manner: - Ensures MSRs are all defined in asm/geode.h, rather than in misc places - Makes the naming consistent; cs553[56] ones begin with MSR_, GX-specific ones start with MSR_GX_, and LX-specific ones start with MSR_LX_. Also, make the names match the data sheet. - Use MSR names rather than numbers in source code - Document the fact that the LX's MSR_PADSEL has the wrong value in the data sheet. That's, uh, good to note. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fbcon: replace mono_col macro with static inlineHarvey Harrison
Use __u32 for max_len to match the declaration of length in the struct fb_bitfield. Suppresses sparse shadowed variable warnings from the nested max() macros: drivers/video/console/fbcon.h:130:8: warning: symbol '_x' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here drivers/video/console/fbcon.h:130:8: warning: symbol '_x' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here drivers/video/console/fbcon.h:130:8: warning: symbol '_y' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here [akpm@linux-foundation.org: fix constness] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28pm2fb: correct error values returned from probe functionKrzysztof Helt
Fix error values returned in some code branches in the pm2fb_probe() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fbdev: use DIV_ROUND_UP or roundupJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28powerpc: offb: add support for foreign endiannessAnton Vorontsov
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fb: add support for foreign endiannessAnton Vorontsov
Add support for the framebuffers with non-native endianness. This is done via FBINFO_FOREIGN_ENDIAN flag that will be used by the drivers. Depending on the host endianness this flag will be overwritten by FBINFO_BE_MATH internal flag, or cleared. Tested to work on MPC8360E-RDK (BE) + Fujitsu MINT framebuffer (LE). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: <Valdis.Kletnieks@vt.edu> Cc: Clemens Koller <clemens.koller@anagramm.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fbdev: make the best-fit section of fb_find_mode return the closest matching ↵Michal Januszewski
mode Currently, if a perfect match in terms of resolution is not found, fb_find_mode() only looks for a best-fit mode among modes with a higher resolution than the one requested. Thus, if the user requests a resolution higher than the largest supported one, they are dropped to the default mode (usually a low resolution one). Change this behaviour so that all valid video modes are considered when looking for a best-fit mode, while still preferring modes with a higher resolution. Signed-off-by: Michal Januszewski <spock@gentoo.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gpiochip_reserve()Anton Vorontsov
Add a new function gpiochip_reserve() to reserve ranges of gpios that platform code has pre-allocated. That is, this marks gpio numbers which will be claimed by drivers that haven't yet been loaded, and thus are not available for dynamic gpio number allocation. [akpm@linux-foundation.org: remove unneeded __must_check] [david-b@pacbell.net: don't export gpiochip_reserve (section fix)] Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gpiolib: dynamic gpio number allocationAnton Vorontsov
If gpio_chip->base is negative during registration, gpiolib performs dynamic base allocation. This is useful for devices that aren't always present, such as GPIOs on hotplugged devices rather than mainboards. (This behavior was previously specified but not implemented.) To avoid using any numbers that may have been explicitly assigned but not yet registered, this dynamic allocation assigns GPIO numbers from the biggest number on down, instead of from the smallest on up. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gpio: define gpio_is_valid()Guennadi Liakhovetski
Introduce a gpio_is_valid() predicate; use it in gpiolib. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> [ use inline function; follow the gpio_* naming convention; work without gpiolib; all programming interfaces need docs ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gpiolib: i2c/spi drivers: handle rmmod betterGuennadi Liakhovetski
Use the newly introduced owner field in struct gpio_chip to protect the current (small) set of non-SOC GPIO drivers from being unloaded while any of their GPIOs are in use. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> [ add mcp23s08 and pcf857x ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28gpiolib: better rmmod infrastructureGuennadi Liakhovetski
As long as one or more GPIOs on a gpio chip are used its driver should not be unloaded. The existing mechanism (gpiochip_remove failure) doesn't address that, since rmmod can no longer be made to fail by having the cleanup code report errors. Module usecounts are the solution. Assuming standard "initialize struct to zero" policies, this change won't affect SOC platform drivers. However, drivers for external chips (on I2C and SPI busses) should be updated if they can be built as modules. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> [ gpio_ensure_requested() needs to update module usecounts too ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28i2o: remove static inline forward declarationsIlpo Järvinen
Nothing in between of them and the later declaration with body needs them. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28isdn: rename CONFIG_AVMB1_COMPAT to not look like a Kconfig variableRobert P. J. Day
Since CONFIG_AVMB1_COMPAT is not a Kconfig variable, move it out of the Kconfig namespace. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28capifs: fix memory leak on remountCyrill Gorcunov
capifs_remount may reach 'return' statement without freeing of memory allocated by kstrdup call Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28hisax: depend on CONFIG_PNP, not __ISAPNP__Bjorn Helgaas
The PNP driver interfaces depend on CONFIG_PNP, so test that rather than __ISAPNP__. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28isdn: fix obvious cut-and-paste error in st5481_usb.cRobert P. J. Day
Fix a rather obvious cut-and-paste error, where earlier code for the controller URB got somehow mixed in with code for the interrupt URB. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28isdn: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28eicon: fix sparse integer as NULL pointer warningsHarvey Harrison
drivers/isdn/hardware/eicon/message.c:745:47: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:761:45: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9122:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9147:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9173:14: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/divasmain.c:396:23: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28avm: fix sparse warning using integer as NULL pointerHarvey Harrison
drivers/isdn/hardware/avm/b1isa.c:206:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1isa.c:208:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:664:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:666:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:668:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:791:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:793:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pci.c:385:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pci.c:387:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:886:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:888:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:890:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:973:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:975:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pcmcia.c:204:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pcmcia.c:206:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1isa.c:554:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1isa.c:556:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1pci.c:236:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1pci.c:238:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1091:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1093:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1095:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1170:21: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1294:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1296:33: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28capi: fix sparse warnings using integer as NULL pointerHarvey Harrison
drivers/isdn/capi/kcapi.c:829:30: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:838:27: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:954:17: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:1007:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:1009:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capiutil.c:453:24: warning: Using plain integer as NULL pointer drivers/isdn/capi/capilib.c:47:30: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:353:29: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:369:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:486:48: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:515:46: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:541:47: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:692:47: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:699:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:704:14: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:943:53: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:948:32: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:969:42: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:989:48: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1026:69: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1028:19: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1061:20: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1529:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1531:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:338:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:758:32: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:880:40: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:407:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:407:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:444:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:1664:61: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:1969:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2294:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2297:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2338:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2341:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capifs.c:192:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capifs.c:194:33: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: convert stub functions from macros into inlinesAndrew Morton
Fixes things like this: fs/super.c: In function `deactivate_super': fs/super.c:182: warning: statement with no effect fs/super.c: In function `do_remount_sb': fs/super.c:644: warning: statement with no effect Cc: Jan Kara <jack@ucw.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: reiserfs: make reiserfs handle quotaon on remountJan Kara
Update reiserfs to handle quotaon on remount RW. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: ext4: make ext4 handle quotaon on remountJan Kara
Update ext4 to handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: ext3: make ext3 handle quotaon on remountJan Kara
Update ext3 handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: quota core changes for quotaon on remountJan Kara
Currently, we just turn quotas off on remount of filesystem to read-only state. The patch below adds necessary framework so that we can turn quotas off on remount RO but we are able to automatically reenable them again when filesystem is remounted to RW state. All we need to do is to keep references to inodes of quota files when remounting RO and using these references to reenable quotas when remounting RW. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: various style cleanupsJan Kara
Cleanups in quota code: Change __inline__ to inline. Change some macros to inline functions. Remove vfs_quota_off_mount() macro. DQUOT_OFF() should be (0) is CONFIG_QUOTA is disabled. Move declaration of mark_dquot_dirty and dirty_dquot from quota.h to dquot.c [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: remove superfluous DQUOT_OFF() in fs/namespace.cJan Kara
We don't need to turn quotas off before remounting root ro, because do_remount_sb() already handles this. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: do not allow setting of quota limits to too high valuesAndrew Perepechko
We should check whether quota limits set via Q_SETQUOTA are not exceeding limits which quota format is able to handle. Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28kprobes: update document about batch registrationMasami Hiramatsu
Add the description of batch registration interfaces to Documentation/kprobes.txt. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28kprobes: add (un)register_jprobes for batch registrationMasami Hiramatsu
Introduce unregister_/register_jprobes() for jprobe batch registration. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28kprobes: add (un)register_kretprobes for batch registrationMasami Hiramatsu
Introduce unregister_/register_kretprobes() for kretprobe batch registration. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28kprobes: add (un)register_kprobes for batch registrationMasami Hiramatsu
Introduce unregister_/register_kprobes() for kprobe batch registration. This can reduce waiting time for synchronized_sched() when a lot of probes have to be unregistered at once. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28list.h: add list_is_singular()Masami Hiramatsu
Add list_is_singular() to check a list has just one entry. list_is_singular() is useful to check whether a list_head which have been temporarily allocated for listing objects can be released or not. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28kprobes: prevent probing of preempt_schedule()Srinivasa Ds
Prohibit users from probing preempt_schedule(). One way of prohibiting the user from probing functions is by marking such functions with __kprobes. But this method doesn't work for those functions, which are already marked to different section like preempt_schedule() (belongs to __sched section). So we use blacklist approach to refuse user from probing these functions. In blacklist approach we populate the blacklisted function's starting address and its size in kprobe_blacklist structure. Then we verify the user specified address against start and end of the blacklisted function. So any attempt to register probe on blacklisted functions will be rejected. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28VT notifier extension for accessibilityKarl Dahlke
Some accessibility modules need to be able to catch the output on the console before the VT interpretation, and possibly swallow it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28mfd: use shorter set_current_state()Robert P. J. Day
Since this routine declares a separate "tsk" pointer for no other reason than to call set_task_state(), get rid of it and just invoke set_current_state(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28sm501: add uart supportMagnus Damm
This patch extends the sm501 mfd with 8250 uart support. We're currently doing this in the board specific r2d-1 code already, but it would be nice to do move things into the mfd since it's more chip specific than board specific. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28spi: spi_imx updatesAndrea Paterniani
Updates to the i.MX SPI controller driver: 1) Some comments changed and/or added. 2) End of transfers is now managed on TXFIFO empty interrupt after the last write to TXFIFO. This speeds interrupt execution by removing the wait for TXFIFO to become empty. On TXFIFO empty interrupt the handler needs only to poll for the end of the ongoing transaction (SPI_CONTROL_XCH) to close the transfer. (2.1) Write only transfers are closed flushing RXFIFO. (2.2) Read transfers are closed reading trailing bytes from RXFIFO. (2.3) Read transfers where RXFIFO overrun occurred are closed by flushing RXFIFO and aborting the message. 3) Fifos are now flushed via SPI disable after the end of ongoing transaction. Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28atmel_spi: support zero length transferAtsushi Nemoto
A spi transfer with zero length is not invalid. For example, such transfer (len == 0 && delay_usecs != 0) can be used to achieve delay before first CLK edge after chipselect assertion. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-01 10:19:23 +0000