aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-19mlx4: replace the dma_sync_single_range_for_cpu/device APIFUJITA Tomonori
There are only two users of the dma_sync_single_range_for_cpu/device API in mainline (mlx4 and ssb). The dma_sync_single_range_for_cpu/device API has never been documented and the dma_sync_single_for_cpu/device API also support a partial sync. This converts mlx4 to use the dma_sync_single_for_cpu/device API (preparations for the removal of the dma_sync_single_range_for_cpu/device API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19greth: some driver cleanupskirjanov@gmail.com
On Fri, Feb 19, 2010 at 13:51 +0100, Jiri Pirko wrote: > > <snip> > >>@@ -1031,7 +1029,7 @@ static void greth_set_multicast_list(struct net_device *dev) > >> return; > >> } > >> > >>- if (dev->mc_count == 0) { > >>+ if (!netdev_mc_count(dev)) { > also please use netdev_mc_empty() here. Some driver cleanups: * convert to use phy_find_first/phy_direct_connect * convert to use netdev_mc_* helpers * fixed missing validate_addr hook * removed netdev_priv castings Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19net/pcmcia: convert to use netdev_for_each_mc_addrJiri Pirko
removed fill_multicast_tbl function in smc91c92_cs and do the work inline rewritten set_addresses function in xirc2ps_cs. This was kinda headache. Simulated the original and new functions and they bahave the same. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19xfrm: Flushing empty SPD generates false eventsJamal Hadi Salim
To see the effect make sure you have an empty SPD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm policy flush" You get prompt back in window2 and you see the flush event on window1. With this fix, you still get prompt on window1 but no event on window2. Thanks to Alexey Dobriyan for finding a bug in earlier version when using pfkey to do the flushing. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19xfrm: Flushing empty SAD generates false eventsJamal Hadi Salim
To see the effect make sure you have an empty SAD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm state flush" You get prompt back in window2 and you see the flush event on window1. With this fix, you still get prompt on window1 but no event on window2. Thanks to Alexey Dobriyan for finding a bug in earlier version when using pfkey to do the flushing. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19pfkey: fix SA and SP flush sequenceJamal Hadi Salim
RFC 2367 says flushing behavior should be: 1) user space -> kernel: flush 2) kernel: flush 3) kernel -> user space: flush event to ALL listeners This is not realistic today in the presence of selinux policies which may reject the flush etc. So we make the sequence become: 1) user space -> kernel: flush 2) kernel: flush 3) kernel -> user space: flush response to originater from #1 4) if there were no errors then: kernel -> user space: flush event to ALL listeners Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19ath9k: convert to new station add/remove callbacksJohannes Berg
This converts ath9k to use the new station add/remove callbacks instead of using the old sta_notify callback. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19mac80211_hwsim: convert to new station add/remove callbacksJohannes Berg
This converts mac80211_hwsim to use the new station add/remove callbacks instead of using the old sta_notify callback. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19p54: convert to new station add/remove callbacksJohannes Berg
This converts p54 to use the new station add/remove callbacks instead of using the old sta_notify callback. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19ar9170: convert to new station add/remove callbacksJohannes Berg
This converts ar9170 to use the new station add/remove callbacks instead of using the old sta_notify callback. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19ssb: Add PCI ID 0x4322 to PHU handlingLarry Finger
Some of the N PHYs need a revision in the handling of the PMU. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19ath9k: fix beacon timer restart after a card resetFelix Fietkau
In AP mode, ath_beacon_config_ap only restarts the timer if a TSF restart is requested. Apparently this was added, because this function unconditionally sets the flag for TSF reset. The problem with this is, that ath9k_hw_reset() clobbers the timer registers (specified in the initvals), thus effectively disabling the SWBA interrupt whenever a card reset without TSF reset is issued (happens in a few places in the code). This patch fixes ath_beacon_config_ap to only issue the TSF reset flag when necessary, but reinitialize the timer unconditionally. Tests show, that this is enough to keep the SWBA interrupt going after a call to ath_reset() Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19iwlwifi: add debugfs to monitor force reset parametersWey-Yi Guy
Adding debugfs file to monitor the counters and other information related to "force_reset" request. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19iwlwifi: separated time check for different type of force resetWey-Yi Guy
Use different timing duration check for different type of force reset, force reset request can come from different source and based on different reason; one type of reset request should not block other type of reset request. Adding structure to keep track of different force reset request. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19iwlwifi: indicate calib version for 6050 seriesAbhijeet Kolekar
Indicate calibration version to uCode Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19iwlwifi: enable serialization of synchronous commandsReinette Chatre
Until now it was only possible to have one synchronous command running at any time. If a synchronous command is in progress when a second request arrives then the second command will fail. Create a new mutex specific for this purpose to only allow one synchronous command at a time, but enable other commands to wait instead of fail if a synchronous command is in progress. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19iwl3945: remove STATUS macros from headerReinette Chatre
iwl3945 includes iwl-core.h in which these STATUS flags are already defined. This also removes a potential confusing definition with iwlcore using STATUS_MODE_PENDING with value 18 and iwl3945 defining (but not using) STATUS_CONF_PENDING for value 18. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19ath9k: fix rate control fallback rate selectionFelix Fietkau
When selecting the tx fallback rate, rc.c used a separate variable 'nrix' for storing the next rate index, however it did not use that as reference for further rate index lowering. Because of that, it ended up reusing the same rate for multiple multi-rate retry stages, thus decreasing delivery probability under changing link conditions. This patch removes the separate (unnecessary) variable and fixes fallback the way it was intended to work. This should result in increased throughput and better link stability. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19MAINTAINERS: update Kalle's email addressKalle Valo
My nokia.com email address won't work anymore, use my private iki.fi address instead. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Added alloc and free hw functionsTeemu Paasikivi
Moved allocation and freeing of context structure of the driver to separate functions from probe and remove functions. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Added IO reset and init functionsTeemu Paasikivi
Added reset and init functions to IO layer of the driver. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Renamed IO functionsTeemu Paasikivi
In preparation for integration of SDIO implementation renamed some IO functions from wl1271_spi_* form to wl1271_*. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Moved common IO functions from wl271_spi.c to wl1271_io.cTeemu Paasikivi
In prepraration for integration of SDIO implementation moved some IO functions common for SPI and SDIO to separate file. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: add testmode supportKalle Valo
Testmode will be used to send PLT (Production Line Testing) commands from user space. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix beacon filter table configurationJuuso Oikarinen
The beacon filter table configuration ACX structure had certain elements reversed, resulting in firmware instability in regard of the feature. Fix the structure. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix ad-hoc SSID updateJuuso Oikarinen
If re-configuring the SSID while ad-hoc was already enabled, the beacon template would be properly updated, but the SSID passed in the CMD_JOIN would not - hence filtering etc would not work properly. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix WEP key handlingJuuso Oikarinen
WEP key index handling was broken: the default key when using key 0 was never specified to the FW, and if using other default than 0, it would be set on the TX path for every single TX'd frame. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix key-remove errorJuuso Oikarinen
The new firmware does not allow removal of unicast keys - they will be automatically removed on the next CMD_JOIN. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Optimized RX path packet retrievalJuuso Oikarinen
Instead of acking RX packets read from the FW once all (of several possible) buffered packets are retrieved, ack packets one by one as they are read. This enables the FW to start receiving more packets from the network while the host read operation is still ongoing. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: wakeup chip in op_conf_tx()Kalle Valo
elp_wakeup() was missing in op_conf_tx() which caused wakeup problems in power save. I forgot to add this part when porting the patch from wl1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix random MAC address settingJuuso Oikarinen
If reverting to a random MAC address, the driver would not update it to the NVS file, and hence the firmware frame filtering would not work properly. So update the randomized MAC address to the NVS image. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: skip 3 unused bytes from the NVSLuciano Coelho
Our NVS uploading mechanism had a bug that was causing it to pass three extra zeros at the start of the NVS. This may be a problem in the NVS generation application, but for now we fix it in the driver. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: add most of the normal initialization commands to PLT modeLuciano Coelho
We need to configure PLT mode almost in the same way as normal mode. Most of the configuration functions need to be called also when entering PLT, with the exception of a few RX and TX configuration (which cause mac80211 warnings if enable while runnning PLT tests). Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Retrieve device mac address from the nvs fileJuuso Oikarinen
Instead of always randomizing the MAC address, retrieve and configure the MAC address from the device specific nvs file. For now, randomize an address only if the address in the NVS is zero. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Use NVS INI file configurationJuuso Oikarinen
Replace the hardcoded general and radio parameter configuration in the driver with configuration taken from the NVS file directly. Also remove the driver dependency to the structures with the parameter data. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: implement WMMKalle Valo
Now that necessary commands for WMM are implemented, implement queue handling for WMM. But WMM is not enabled yet, only one queue is used. Based on a similar patch from wl1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: modify wl1271_acx_tid_cfg() to use function parametersKalle Valo
For WMM we need to configure each tid separately so modify wl1271_acx_tid_cfg() to take the configuration from function parameters instead. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: modify wl1271_acx_ac_cfg() to use function parametersKalle Valo
For WMM we need to configure each queue separately so modify wl1271_acx_ac_cfg() to take the configuration from function parameters instead. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Add SSID configuration for JOIN in ad-hocJuuso Oikarinen
This patch adds code to extract the SSID from the beacon template used for ad-hoc. The mac80211 currently does not provide the SSID, so this is a workaround for that, for now. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix channel changing codeJuuso Oikarinen
The channel changing code would a) change the BSSID to a dummy on upon channel change, breaking connectivity, and b) not update the channel number at all for ad-hoc, breaking adhoc. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix PSM entryJuuso Oikarinen
Currently the PSM entry function assumes successful operation, and enables ELP, BET and beacon filtering right away. This is bad, because the PSM entry may fail due to environmental issues, which will cause the ELP, BET and beacon filtering to be illegally enabled (because FW remains in active state.) Fix this by enabling ELP, BET and beacon filtering only after successful entry, and by ensuring the firmware is in active mode after the failure. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19staging: rtl8192su: fix compile error from wireless-testing commitFrederic Leroy
In wireless-testing, commit 7044cc56 added struct ieee80211_hdr_3addr to include/linux/ieee80211.h. This definition collides with one that is in the rtl8192su driver in staging. The conflict is resolved by changing rtl8192su to use the definition from include/linux/ieee80211.h. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19p54usb: Add the USB ID for Belkin (Accton) FD7050E ver 1010ecJean-François Moine
Yet another USB ID. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19nl80211: add power save commandsKalle Valo
The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19drivers/net/wireless/p54/txrx.c Fix off by one errorDarren Jenkins
fix off by one error in the queue size check of p54_tx_qos_accounting_alloc() Coverity CID: 13314 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19Introduce PCMCIA_DEVICE_PROD_ID3Pavel Roskin
...and use it in hostap_cs and orinoco_cs. Another PCMCIA device with Intersil Prism chipset has been reported: Socket 0: product info: "Gigabyte", "GN-WLM01_P25L_ADAPTER", "ISL37300P", "Eval-RevA" manfid: 0x02e0, 0x1011 function: 6 (network) As it's the case with some other Prism based devices, the third ID string contains a design name that should be sufficient to identify the card as having Intersil Prism chipset and thus compatible with both orinoco_cs and hostap_cs. Introduce PCMCIA_DEVICE_PROD_ID3 that matches the third ID string only. Use it in orinoco_cs and hostap_cs to match cards with the third ID string indicating Prism chipset. Remove corresponding entries that use PCMCIA_DEVICE_PROD_ID123. Reported-by: Ozzy <ozzymud@gmail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-19iwlwifi: set HT flags after channel in rxonDan Halperin
The HT extension channel settings require priv->staging_rxon.channel to be accurate. However, iwl_set_rxon_ht was being called before iwl_set_rxon_channel and thus HT40 could be broken unless another call to iwl_mac_config came in. This problem was recently introduced by "iwlwifi: Fix to set correct ht configuration" The particular setting in which I noticed this was monitor mode: iwconfig wlan0 mode monitor ifconfig wlan0 up ./iw wlan0 set channel 64 HT40- #./iw wlan0 set channel 64 HT40- tcpdump -i wlan0 -y IEEE802_11_RADIO would only catch HT40 packets if I issued the IW command twice. From visual inspection, iwl_set_rxon_channel does not depend on iwl_set_rxon_ht, so simply swapping them should be safe and fixes this problem. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19netfilter: nf_conntrack_reasm: properly handle packets fragmented into a ↵Patrick McHardy
single fragment When an ICMPV6_PKT_TOOBIG message is received with a MTU below 1280, all further packets include a fragment header. Unlike regular defragmentation, conntrack also needs to "reassemble" those fragments in order to obtain a packet without the fragment header for connection tracking. Currently nf_conntrack_reasm checks whether a fragment has either IP6_MF set or an offset != 0, which makes it ignore those fragments. Remove the invalid check and make reassembly handle fragment queues containing only a single fragment. Reported-and-tested-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-19netfilter: nf_queue: fix NF_STOLEN skb leakEric Dumazet
commit 3bc38712e3a6e059 (handle NF_STOP and unknown verdicts in nf_reinject) was a partial fix to packet leaks. If user asks NF_STOLEN status, we must free the skb as well. Reported-by: Afi Gjermund <afigjermund@gmail.com> Signed-off-by: Eric DUmazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 18:18:40 +0000