aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-17mfd: add ASIC3 IRQ numbersPhilipp Zabel
IRQ number definitions for PWM, LED, SPI and OWM (ds1wm). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: asic3: add clock handling for MFD cellsPhilipp Zabel
Since ASIC3 has to work on both PXA and S3C and since their struct clk implementations differ, we can't register out clocks with the clkdev mechanism (yet?). For now we have to keep clock handling internal to this driver and enable/disable the clocks via the mfd_cell->enable/disable functions. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: asic3: add asic3_set_register common operationPhilipp Zabel
Used to configure single bits of the SDHWCTRL_SDCONF and EXTCF_RESET/SELECT registers needed for DS1WM, MMC/SDIO and PCMCIA functionality. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: Fix Kconfig help text for WM8350Mark Brown
More with the grammar. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: add PCAP driverDaniel Ribeiro
The PCAP Asic as present on EZX phones is a multi function device with voltage regulators, ADC, touch screen controller, RTC, USB transceiver, leds controller, and audio codec. It has two SPI ports, typically one is connected to the application processor and another to the baseband, this driver provides read/write functions to its registers, irq demultiplexer and ADC queueing/abstraction. This chip is used on a lot of Motorola phones, it was manufactured by TI as a custom product with the name PTWL93017, later this design evolved into the ATLAS PMIC from Freescale (MC13783). Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: add U300 AB3100 core supportLinus Walleij
This adds a core driver for the AB3100 mixed-signal circuit found in the ST-Ericsson U300 series platforms. This driver is a singleton proxy for all accesses to the AB3100 sub-drivers which will be merged on top of this one, RTC, regulators, battery and system power control, vibrator, LEDs, and an ALSA codec. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17drivers/mfd: remove obsolete irq_desc_t typedefThomas Gleixner
The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users and remove the typedef. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd/pcf50633-gpio.c: add MODULE_LICENSEAdrian Bunk
Add the missing MODULE_LICENSE("GPL"). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: Mark WM8350 mask revision as readable to match siliconMark Brown
No impact unless someone has written additional kernel code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: Mark clocks_init as non-init in twl4030-core.cRakib Mullick
Impact: Fix section mismatch. clocks_init() has been called from twl4030_probe() which is a non-init function. Since probing can be done anytime so clocks_init will be called anytime too. So we mark clock_init() as non-init. LD drivers/mfd/built-in.o WARNING: drivers/mfd/built-in.o(.text+0x8dd9): Section mismatch in reference from the function twl4030_probe() to the function .init.text:clocks_init() The function twl4030_probe() references the function __init clocks_init(). This is often because twl4030_probe lacks a __init annotation or the annotation of clocks_init is wrong. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: Correct readability of WM8350 register 227Mark Brown
This includes the USB current limit status override which is used in the power management driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17kmemleak: Fix some typos in commentsCatalin Marinas
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-17kmemleak: Rename kmemleak_panic to kmemleak_stopCatalin Marinas
This is to avoid the confusion created by the "panic" word. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-17kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocationsCatalin Marinas
Kmemleak allocates memory for pointer tracking and it tries to avoid using GFP_ATOMIC if the caller doesn't require it. However other gfp flags may be passed by the caller which aren't required by kmemleak. This patch filters the gfp flags so that only GFP_KERNEL | GFP_ATOMIC are used. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-17Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] cpumask: new cpumask operators for arch/x86/kernel/cpu/cpufreq/powernow-k8.c [CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c [CPUFREQ] cpumask: avoid cpumask games in arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c [CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c [CPUFREQ] powernow-k8: get drv data for correct CPU [CPUFREQ] powernow-k8: read P-state from HW [CPUFREQ] reduce scope of ACPI_PSS_BIOS_BUG_MSG[] [CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier() [CPUFREQ] minor correction to cpu-freq documentation [CPUFREQ] powernow-k8.c: mess cleanup [CPUFREQ] Only set sampling_rate_max deprecated, sampling_rate_min is useful [CPUFREQ] powernow-k8: Set transition latency to 1 if ACPI tables export 0 [CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case
2009-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic79xx: make driver respect nvram for IU and QAS settings [SCSI] don't attach ULD to Dell Universal Xport [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3 [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences [SCSI] qla2xxx: Resolve a performance issue in interrupt [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set. [SCSI] nsp_cs: time_out reaches -1 [SCSI] qla2xxx: fix printk format warnings [SCSI] ncr53c8xx: div reaches -1 [SCSI] compat: don't perform unneeded copy in sg_io code [SCSI] zfcp: Update FC pass-through support [SCSI] zfcp: Add FC pass-through support [SCSI] FC Pass Thru support
2009-06-17Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: (21 commits) UBI: add reboot notifier UBI: handle more error codes UBI: fix multiple spelling typos UBI: fix kmem_cache_free on error patch UBI: print amount of reserved PEBs UBI: improve messages in the WL worker UBI: make gluebi a separate module UBI: remove built-in gluebi UBI: add notification API UBI: do not switch to R/O mode on read errors UBI: fix and clean-up error paths in WL worker UBI: introduce new constants UBI: fix race condition UBI: minor serialization fix UBI: do not panic if volume check fails UBI: add dump_stack in checking code UBI: fix races in I/O debugging checks UBI: small debugging code optimization UBI: improve debugging messages UBI: re-name volumes_mutex to device_mutex ...
2009-06-17Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: start using hrtimers hrtimer: export ktime_add_safe UBIFS: do not forget to register BDI device UBIFS: allow sync option in rootflags UBIFS: remove dead code UBIFS: use anonymous device UBIFS: return proper error code if the compr is not present UBIFS: return error if link and unlink race UBIFS: reset no_space flag after inode deletion
2009-06-17Documentation/vm/Makefile: don't try to build slqbinfoAndrew Morton
For it is only in linux-next at this stage. Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17drm/radeon/kms: remove the _DRM_DRIVER from the KMS paths.Dave Airlie
This causes an issue since we fixed the drm mappings to do the right thing, so its just a copy and pasto. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: SLUB: Fix early boot GFP_DMA allocations SLUB: Don't print out OOM warning for __GFP_NOFAIL SLUB: fix build when !SLUB_DEBUG SLUB: Out-of-memory diagnostics slab: document kzfree() zeroing behavior slab: fix generic PAGE_POISONING conflict with SLAB_RED_ZONE slob: use PG_slab for identifying SLOB pages
2009-06-17Pull for-2.6.31 into releaseTony Luck
2009-06-17[IA64] Convert ia64 to use int-ll64.hMatthew Wilcox
It is generally agreed that it would be beneficial for u64 to be an unsigned long long on all architectures. ia64 (in common with several other 64-bit architectures) currently uses unsigned long. Migrating piecemeal is too painful; this giant patch fixes all compilation warnings and errors that come as a result of switching to use int-ll64.h. Note that userspace will still see __u64 defined as unsigned long. This is important as it affects C++ name mangling. [Updated by Tony Luck to change efi.h:efi_freemem_callback_t to use u64 for start/end rather than unsigned long] Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-06-17Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits) MIPS: Add hibernation support MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h MIPS: Allow CPU specific overriding of CP0 hwrena impl bits. MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems. Hugetlbfs: Enable hugetlbfs for more systems in Kconfig. MIPS: TLB support for hugetlbfs. MIPS: Add hugetlbfs page defines. MIPS: Add support files for hugetlbfs. MIPS: Remove unused parameters from iPTE_LW. Staging: Add octeon-ethernet driver files. MIPS: Export erratum function needed by octeon-ethernet driver. MIPS: Cavium-Octeon: Add more chip specific feature tests. MIPS: Cavium-Octeon: Add more board type constants. MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver. MIPS: Add named alloc functions to OCTEON boot monitor memory allocator. MIPS: Alchemy: devboards: Convert to gpio calls. MIPS: Alchemy: xxs1500: use linux gpio api. MIPS: Alchemy: MTX-1: Use linux gpio api. MIPS: Alchemy: Rewrite GPIO support. MIPS: Alchemy: Remove unused au1000_gpio.h header ...
2009-06-17[IA64] Fix build error in paravirt_patchlist.cJes Sorensen
Andrew cleaned up some #include tangles in: commit 0d9c25dde878a636ee9a9b53923569171bf9a55b headers: move module_bug_finalize()/module_bug_cleanup() definitions into module.h which resulted in this build error for ia64: CC arch/ia64/kernel/paravirt_patchlist.o arch/ia64/kernel/paravirt_patchlist.c:43: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__initdata' arch/ia64/kernel/paravirt_patchlist.c:54: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'paravirt_get_gate_patchlist' arch/ia64/kernel/paravirt_patchlist.c:76: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'paravirt_get_gate_section' make[1]: *** [arch/ia64/kernel/paravirt_patchlist.o] Error 1 The problem was that paravirt_patchlist.c was relying on some of the nested includes (specifically that linux/bug.h included linux/module.h Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-06-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: get rid of BKL in fs/sysv get rid of BKL in fs/minix get rid of BKL in fs/efs befs ->pust_super() doesn't need BKL Cleanup of adfs headers 9P doesn't need BKL in ->umount_begin() fuse doesn't need BKL in ->umount_begin() No instance of ->bmap() needs BKL remove unlock_kernel() left accidentally ext4: avoid unnecessary spinlock in critical POSIX ACL path ext3: avoid unnecessary spinlock in critical POSIX ACL path
2009-06-17MIPS: Add hibernation supportWu Zhangjin
[Ralf: SMP support requires CPU hotplugging which MIPS currently doesn't support. As implemented in this patch cache and tlb flushing will also be invoked with interrupts disabled so smp_call_function() will blow up in charming ways. So limit to !SMP.] Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Yan Hua <yanh@lemote.com> Reviewed-by: Arnaud Patard <apatard@mandriva.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.hDavid Daney
We had an ugly #ifdef for Cavium Octeon hwrena bits in traps.c, remove it to mach-cavium-octeon/cpu-feature-overrides.h Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.David Daney
Some CPUs have implementation dependent rdhwr registers. Allow them to be enabled on a per CPU basis. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.David Daney
Add new kconfig variables SYS_SUPPORTS_HUGETLBFS and CPU_SUPPORTS_HUGEPAGES. They are enabled for systems that are known to support huge pages. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.David Daney
As part of adding hugetlbfs support for MIPS, I am adding a new kconfig variable 'SYS_SUPPORTS_HUGETLBFS'. Since some mips cpu varients don't yet support it, we can enable selection of HUGETLBFS on a system by system basis from the arch/mips/Kconfig. Signed-off-by: David Daney <ddaney@caviumnetworks.com> CC: William Irwin <wli@holomorphy.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: TLB support for hugetlbfs.David Daney
The TLB handlers need to check for huge pages and give them special handling. Huge pages consist of two contiguous sub-pages of physical memory. * Loading entrylo0 and entrylo1 need to be handled specially. * The page mask must be set for huge pages and then restored after writing the TLB entries. * The PTE for huge pages resides in the PMD, we halt traversal of the tables there. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add hugetlbfs page defines.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add support files for hugetlbfs.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Remove unused parameters from iPTE_LW.David Daney
The l parameter to iPTE_LW() is unused. Remove it and from some of its callers as well. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17Staging: Add octeon-ethernet driver files.David Daney
The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui ports present on the Cavium OCTEON family of SOCs. These SOCs are multi-core mips64 processors with existing support over in arch/mips. The driver files can be categorized into three basic groups: 1) Register definitions, these are named cvmx-*-defs.h 2) Main driver code, these have names that don't start cvmx-. 3) Interface specific functions and other utility code, names starting with cvmx- Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Export erratum function needed by octeon-ethernet driver.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Cavium-Octeon: Add more chip specific feature tests.David Daney
The octeon-ethernet driver needs to check for additional chip specific features, we add them to the octeon_has_feature() framework. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Cavium-Octeon: Add more board type constants.David Daney
The bootloader now uses additional board type constants. The octeon-ethernet driver needs some of the new values. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add named alloc functions to OCTEON boot monitor memory allocator.David Daney
The various Octeon ethernet drivers use these new functions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: devboards: Convert to gpio calls.Manuel Lauss
Replace a few open-coded GPIO register accesses with gpio calls. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: xxs1500: use linux gpio api.Manuel Lauss
Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: MTX-1: Use linux gpio api.Manuel Lauss
Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: Rewrite GPIO support.Manuel Lauss
The current in-kernel Alchemy GPIO support is far too inflexible for all my use cases. To address this, the following changes are made: * create generic functions which deal with manipulating the on-chip GPIO1/2 blocks. Such functions are universally useful. * Macros for GPIO2 shared interrupt management and block control. * support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros. If CONFIG_GPIOLIB is not enabled, provide linux gpio framework compatibility by directly inlining the GPIO1/2 functions. GPIO access is limited to on-chip ones and they can be accessed as documented in the datasheets (GPIO0-31 and 200-215). If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and one for GPIO2, are registered. GPIOs can still be accessed by using the numberspace established in the databooks. However this is not yet flexible enough for my uses: My Alchemy systems have a documented "external" gpio interface (fixed, different numberspace) and can support a variety of baseboards, some of which are equipped with I2C gpio expanders. I want to be able to provide the default 16 GPIOs of the CPU board numbered as 0..15 and also support gpio expanders, if present, starting as gpio16. To achieve this, a new Kconfig symbol for Alchemy is introduced, CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal that they don't want the Alchemy numberspace exposed to the outside world, but instead want to provide their own. Boards are now respon- sible for providing the linux gpio interface glue code (either in a custom gpio.h header (in board include directory) or with gpio_chips). To make the board-specific inlined gpio functions work, the MIPS Makefile must be changed so that the mach-au1x00/gpio.h header is included _after_ the board headers, by moving the inclusion of the mach-au1x00/ to the end of the header list. See arch/mips/include/asm/mach-au1x00/gpio.h for more info. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: Remove unused au1000_gpio.h headerManuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: BCM47xx: Fix gpio_direction_outputMatthieu Castet
gpio_direction_output should also set an output value according to the API. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: ioctl.h: Cleanup.Ralf Baechle
o Rewrite to use <asm-generic/ioctl.h>. Cuts down the file from 40 to 16 lines. o Delete _IOC_VOID, _IOC_OUT, _IOC_IN and _IOC_INOUT. They were added for 2.1.14 but I was not able to find any user - not even historical ones. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: TXx9: Add TX4939 RNG supportAtsushi Nemoto
Add platform support for RNG of TX4939 SoC. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: hwrng: Add TX4939 RNG driverAtsushi Nemoto
This patch adds support for the integrated RNG of the TX4939 SoC. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>